I save a print file with MODI who registers as a tif, but when I go in to find them I can't.

Similar Questions

• I use upstream, that allowed color spaces are CMYK. When I place a RGB file, preflight reports an error (very good). But when I add the Fx (effect) does not forward flight "Bevel and Emboss", report an error, which is really annoying. How can I fix? I hav

  I use upstream, that allowed color spaces are CMYK. When I place a RGB file, preflight reports an error (very good). But when I add the Fx (effect) does not forward flight "Bevel and Emboss", report an error, which is really annoying. How can I fix? I like to have 'The transparency blend space' on "Document CMYK" and in the preflight profile "Fusion of transparent space" required: "CMYK".

  Interestingly, if I copy and paste your images into a new doc 2 points scored.

  I think that the solution is to assign the CMYK printer profile in the document. In this case, you no longer control upstream for RGB color, because by default it is converted to CMYK space correct on export or print output.

• I have an iphone 6 it is damaged by water but I set myself and the person put it on charge and tested it with a multimeter and it worked perfectly but when I went to look for a screen tested on it, it didn't work

  I have an iphone 6 it is damaged by water but I set myself and the person put it on charge and tested it with a multimeter and it worked perfectly but when I went to get a screen tested on it because she does not have the person had not on is it did not work, even if the person has used only flow to correct and get a few corosions out with the replacement of some components of the person responsible for 10 minutes after having plugged in and the battery it wamer so it as I said her test with a multi meter test and he registered 12v and I wondered if something was wrong with it and if I could fix it easily?

  Check the liquid Indcator of Contact.

  Instructions here > liquid for iPhone or iPod is not covered by the warranty - Apple support

  Just so you know, the service of the liquid damage to an iPhone or iPod is not covered by the limited warranty of one Apple or an AppleCare Protection Plan (APP).

• Prospective Golf Sports simulation mode full-screen on one monitor, but when it runs the mouse would not return to the other monitor.

  original title: two monitors, mouse stuck
  I'm under Simulation of Golf Sports prospective mode full-screen on one monitor, but when it runs the mouse will not return to the other monitor. It seems that the mouse is not bound by the program, but I want to be able to use another application on the other monitor. Any suggestions?

  Hello

   
  What operating system is installed on the computer?
   
  Method 1: You can press the Windows key on the keyboard that appears in the start window and your mouse will automatically gets shifted to the main monitor.
   
  Method 2:
  (a) click Start, type change the mouse settings.
  (b) go to the pointer Options tab of
  (c) uncheck Display pointer trails
  (d) click apply and OK.
   
  Method 3: See if he has all the parameters of the Simulation of Golf to release the mouse button.
   
  If the methods above do not help, you can contact the Golf Simulation for additional help.
   

• I wrote a batch file in Notepad using win XP, it works, but when you are finished, the black screen is still there. How can I automatically have the black screen disappear.

  I wrote a batch file in Notepad using win XP, it works, but when you are finished, the black screen is still there.    How can I automatically have the black screen disappear.

  Hello

  Use it as the last command in the file beats.

  OUTPUT

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Save the Muse file with older version

  I'm working on a Web site with another person across the country. I upgraded to Muse CC, she didn't. Is it possible to save the changes I do in a way which she can then make future changes to the file?

  Hi Luis,.

  Please refer to the response of Zak in this related question, why I have to "save under" a Muse site, I've been working on?

  Muse supports not 'save back' either export to an earlier version, so if you need to share the file with another person who uses an earlier version or for a reason, go back to the previous version of Muse, you must file in the older file format.

  If you already use an automated backup system and/or store your .muse file in a cloud folder synchronized, keeping the extra copy is not necessary, since these mechanisms would provide another way to revert to a previous version of the file, if need is always.

  - Abhishek Maurya

• Two questions - cannot save the printer shares with the error code 0x000006d9 and part of the Machine is not accessible from the network of working groups

  I think this are problems, but here is the separately questions, first of all - the basics:

  4 PC network using the working group with two Windows 7 (ultimate) and two xp.  Everything worked fine with the a previous vista / xp 3 network.  All except the Windows 7 Desktop behave well. The network is connected with a modem cable to a 5XT netscreen NS (firewall hardware to the outside and the inside hub), a netgear wireless access point and Windows workgroup use (as mentioned above).  Name all is correct on all machines, all the discovery settings are in place and each has Norton Internet security for its local protection services. Upgrades of Windows 7 have been computer vista laptop connected wireless and wired desktop previously running XP Professional sp3.  XP conversion was assisted on the desktop of the wizard upgrade Laplink PC Mover.  Applications executed in appearance on the two level computers.

  On the desktop - I can't share printers. When I use "networks and printers" in the start menu to share on a printer I get code 0x000006d9 error saying something like the configuration cannot be saved.  All local jobs printing works well.

  On the desktop - the name of the computer records also of all as on the network (it is discovered and mapped by each PC) but when I try to access it from any other machine I get a general error says something like "check your spelling of the name mannequin." This desktop computer Win 7 can browse shared folders on the network of and write about everything.  Somewhat added data - this device can ping all others in the network sucessfully but none get a ping successfully into the offending machine either with ip address or computer name (times out waiting for a response or said the name is not found).  He himself can ping successfully.  It accesses the internet very high hand.

  Solutions have been attempted without a firewall (Firewall Norton Smart Internet - 2010), with the firewall and various changes to authorization.  A final discovery was that Windows Firewall will not allow because BFE is not able to start - error 5 - access denied (this was discovered by train to allow a possible solution because of some internet chatter that the Windows Firewall must be running to implement shared printers).  All other dependencies are running to get a break on why BFE is not (it turns on the Win 7 laptop as well as the firewall).  Authorizations have been verified in the registry for settings of firewall and BFE (ports, permits, etc.) have also been looked at with a very critical eye.  SFC has been run with no problem.  All ports for net drivers, Win 7 networking and other actions are open in the firewall.

  Then people - I did some internet research and I tried a lot of suggested solutions nothing doesn't.  My apologies in advance if a person provides a solution and I say "tried".  Any help is very appreciated

  You can mark this as resolved problem!
  The program involved, causing this error is firewall Windows, here is what you need to do to fix this...
  If like me you have disabled windows firewall, I use Security Suite of ZoneAlarm, you will need to re-enable the firewall to share the printer.

  If you have disabled or turned off the Windows Firewall. (and in my case this error was caused by exactly that)
  Step #1 - disable any other firewall can be installed. Stop to load at startup and restart your PC.

  Step #2 - go to the tools of Admin folder > Services > Windows Firewall > double click and is it set to manual or automatic and keep it.

  Step #3 - open Control Panel > system & security > Windows Firewall > enable or disable the Windows Firewall > (Enable) turn on the Windows Firewall > save
  Then go to Restore Defaults > click on restore default button > save
  (you only do this IF you have changed the settings of the firewall, but it is always a good idea and will ensure that there are no problems during the proceeding)

  Step #4 - click Control Panel Home > view devices & Printers > Select / click on your printer > screen printer properties > share > share this printer > OK

  Step #5 - go back to firewall Windows and the tower he walks back > save

  Step #6 - go back to Services > and the Manual value Windows Firewall (or turn it off if you want, I recommend the manual)

  Step #7 - reboot and re-enable your firewall preferred to start at startup > Reboot

  Step #8 - take a deep breath and sigh of relief! :)

• How can I get 12 PES to save a TIFF file with file extension ".tiff" instead of ".tif"?

  I use PSE 12 as an external editor for Aperture.  When I ask to use an external editor photo, opening creates a .tiff file in my folder of opening, lance 12 PES and told him to change the .tiff file.  It all works very well.  When I am done editing in PES 12, I ask him to save the file and it saves it in the original opening file with the extension .tif.  I would say rather "save under" and then it suggests the name of the file with the extension .tif.  When I fix the .tiff extension it tells me that I will replace the file (that's what I want!).  I say Yes and then I find that PSE did not overwrite the file, but he wrote in a .tif in any case file.  I have to go in the folder, delete the .tiff file and rename the .tif .tiff in and then everything is fine - but what hassle.  Did someone solved this problem?

  This isn't quite the problem, which is good, because you can't change that. The real solution is that you never want to see Save as window in PSE if you use PES as external editor for any program. When you see you're not creating a version for your asset management program. Go to the PES preferences > saving files > first record and choose to save to the existing file. This should do what you want.

• Cannot save a PNG file with alpha channel transparency format

  I try to send a PNG file with transparency channel alpha on my Zenfolio web page. It is a custom application of copyright law that I do.  When I save the file, cs5, and I select Save in PNG, in the window, I get a message error/alert that says "the file should be saved as a copy with this application.  I'm not allowed to select the Alpha channel option.

  I think that I have a setting in CS5 that is making this happen, but I'm not smart enough to understand.

  What happens when I have when even save it and upload this file to my Zenfolio website is copyright logo has a cloud of sorts with it. It's the rest of the House generated page which should be, but is not transparent.

  PNG does not support alpha channels, only one channel of transparency.

  Just make the image with transparency and save in PNG.

• How to save a JPEG file with transparency?

  I need to save a JPEG banner with transparent areas, around the shape of the banner. How do I do this in CS6? There is no transparent Matt choice, only colors and 'none' which translates as white edges. I'm on a Mac running OS 10.7.5/CS6. Thanks for the ideas.

  You do not have.  You can not.

  The JPEG format does not support transparency.  Period.

  Not in any version of Photoshop and not in any other software on this planet.

  Use PNG, PSD, PSB, GIF or TIFF.

• trying to set up the printer to print files with a half higher or lower from standard paper size.

  Try to configure the printer to print images or files size (5 x 8) on half higher or lower standard paper of 8 1/2 "x 11".  Need to rotate 90 degrees.

  Thanks in advance for any ideas.

  Hello Michael,

  Thanks for posting your concern in the Microsoft Community. Let me help you.

  To be able to provide you with a better idea on how to change the print size, tell us a little more details on money issues.

  • How you want to print? Is it through any program or application or any web browser in Windows?
  • What is the brand and model of the printer that you are using?

  As a recommendation, I suggest to try the options in printing preferences in Windows and check if it helps. Follow the steps below.

  1. Open devices and printers.

  2. Right-click the printer you want to use, and then click Printing Preferences.

  3. Make the appropriate choice for the paper or paper size option

  Ref: choose printing options

  Write to us again for assistance.

  Thank you.

• After scanning in a file, I can't save the PDF file with a unique file name, it will only back up in its original name; Otherwise, if I save the name of the file under a new name, save it box goes outside and the file is renamed and saved. Help!

  If I analyze the file and its original name is:

  Ssrv395alm76439... and I want to rename it "background."

  If I have the rename, the file won't save. If I leave the file as it will save and I have to go to an additional folder and rename it.

  Help, it's too long. I just click on "Save as" and rename and save the document in the necessary folder at a time!

  Hi Allisonchristinele ,

  Please provide the exact point of the software & OS installed on your system. Also check if it is there any update available for the software after crossing "" help > check updates "»

  Follow this thread to reset the Acrobat preferences:- How to reset preference settings in format Acrobat.

  Like 'save' will save the changes with the file & "save under" will give the window using which can save the file to any location on the system.

  I would like to know is what is happening with some or all the files.

  Also, please try to check with the different user account to reproduce the problem.

  Kind regards

  Christian

• How to save a PDF file with presets

  How can I save/export format PDF of Adobe Acrobat Pro with a preset (the same presets as in InDesign, for example)?

  Thank you

  These presets are used to create PDF files. Once you have it, the presets do not apply. However if you want to reduce the size of file and quality, you can try save under... Optimized PDF (assuming that you have Acrobat X or later).

• How to save a PDF file with zoom as TIFF/PNG of quality equal?

  I have a graphic photographic resolution in PDF (vector graphics). Zoom in Acrobat results in an impeccable oversampled image you expect from vector graphics. However, I can not save the PDF upscale as an oversampled TIFF or PNG - I get horrible artifacts. How can I get Acrobat to save the PDF with zoom a PNG/TIFF image?

  Thank you very much...

  You can get what you want with instant tool under editing, AA XI. This will give you a screenshot of what is shown on the screen. The best way is to open the vector graphic in Illustrator and work directly with vector illustration.

• How to save a PSD file with a composite image?

  Windows 7 64 bit | Photoshop CS4 |  iMatch DAM

  Somewhere along the line I must have changed a setting, because a lot of my images now are not visible in my program of DAM (iMatch) or other photo viewers, like Picasa for example. Instead, a small rectangular black box appears which says "This layered Photoshop file was not saved with a composite image. Can a contributor I tell where the parameter is to record with a composite - help is much appreciated, IM

  "maximize compatibility" is the switch you're looking for.