I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse.

Original title: right click on the mouse itself activating

I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.

I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.

Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?


Try to install the drivers from this link and check.


Tags: Windows

Similar Questions

  • Some problems with the upgrade of RAM on Lenovo ThinkPad T500?


    My laptop is Lenovo ThinkPad T500 and its main features as follows:

    -Processor Intel Core 2 Duo T9400 (2.53 GHz, 1066 MHz, 6MBL2).

    - 4 GB PC3 - 8500 DDR3 SDRAM 1067 MHz SODIMM Memory (2 DIMM).

    -ATI Mobility Radeon 3650 with 256 MB.

    I really need to upgrade the RAM to work with SharePoint 2010 and Windows Server 2008 R2. and my big question is:

    * How many memory locations that I have in my Lenovo ThinkPad T500?

    I read on (http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-55644#t) that the maximum memory size for T500 is 8 GB.

    Yes, in case if my Lenovo ThinkPad T500 laptop has only two memory slots, so, I'll have to buy 2 memory cards of ThinkPad 4 GB PC3-8500 DDR3 Low-halogen SO-DIMM, in order to get the 8 GB... and I have to throw my current memory cards...

    My other question is:

    * Is easy to install/remove RAM in Lenovo ThinkPad T500?

    Sorry to ask the second question, but I have never dealt with before material.

    I would appreciate your inputs.

    Thank you for your consideration of my request and I look forward to hearing from you soon!

    The T500 has only two slots of RAM, so the upgrade to 8 GB would mean that your two existing 2 GB modules would need to be removed.

    Replacement of the RAM is simple; Remove the four screws for the Palm and the locations of memory will be under the palm rest.

    See the HMM for more detailed instructions: http://www-307.ibm.com/pc/support/site.wss/MIGR-70068.html

  • I've updated to 2015.2 in September and started having problems with freezing while working on the photos. I upgraded my memory from 4 GB to 8 GB and it has disappeared (in most cases); However, I always feel a lot of questions of export of JPEGs (gel) bu

    I've updated to 2015.2 in September and started having problems with freezing while working on the photos. I upgraded my memory from 4 GB to 8 GB and it has disappeared (in most cases); However, I always feel a lot of questions of export of JPEGs (gel) but not tif files? Very frustrating. Tried to install the new updates but my creative cloud is just a blank page?


    I think you are referring to the white empty window of CC desktop application.

    Please refer to the threads below where this issue has been addressed:

    Creative cloud is empty window why?

    Cloud Desktop App is empty?

    New application Cloud Creative unusable: it is empty!

    Re: Empty opening creative cloud app

    Kind regards


  • I use an analog input on a PCI-6224 and are having problems with the clock source

    I use an analog input on a PCI-6224 and are having problems with the clock source. I'm trying samples of 16 different analog inputs very quickly. I have the sample mode: Timed Single Point material. The rate, that I am running is the maximum (250 kHz (15625Hz per channel)). I left the default clock source and trying to taste several times. The analogue input works for a short time (2-3 seconds) and then everything stops. I'm doing something wrong or is there something I'm missing? Any advice would be great.

    That's how you samples using the sample clock clock. If you see a delay then something is wrong with how you track/data visualization.

    Single point NI the hardware is for PID control with a real-time operating system.

  • having problems with the pop-up windows of analytical Google all of a sudden and now the pages are crashing or being redirected

    original title: google analytics popups

    Ive been having problems with the Google analytic pop-up windows all of a sudden now pages break or redirected, I've ran Malware, Windows Defender, a direct care, Avira, Avast and F-secure, and nothing seems to have read on other forums to help, that his may be a Trojan horse: Trojan.osx.Dnschanger.B... ive also rebooted my router as suggested in some forums , but nothing seems to help?

    Hi NicolaaTC,

    See the links below and check if it works.

    What is the browser hijacking?



    Difficulty of your web browser hijacked


  • anyone having problems with the junk e-mail filter in hotmail or msn Explorer

    anyone having problems with the junk e-mail filter in hotmail or msn Explorer


    1. The issue is only with MSN mail?
    2. Have you tried using another web browser and check if you are faced with a similar question?

    Given that the problem is related to MSN I suggest you to contact MSN support for assistance.

    How to contact MSN customer service


    Check also:




    Hope this information is useful.

  • Is anyone having problems with the last lR? I can't do to apply effects to develop at all. I have to force to leave whenever I try to use it.

    Is anyone having problems with the last LR?

    I can't do the effects to apply to develop and I have to force to leave whenever I try to use it.

    I have absolutely nothing accomplished recently - it has worked so well.

    I created enough space on my hard drive thinking that this might be a cause of slow operation but he has not made the difference...

    Hi GKVsiuals,

    suggest make you in Lightroom preferences > performance > uncheck 'use graphics processor' and restart Lightroom to check again.

  • Is anyone else having problems with the crop tool in LR6.

    Is anyone else having problems with the crop tool in LR6.
    My PC crashes sometimes when I use the crop tool in LR6. It seems fairly random, and I never had this problem in LR5.

    Have you tried to disable the GPU acceleration in Lightroom preferences?

  • Am having problems with my new mouse Microsoft Wireless Optical 2000

    I received it with new batteries and it seemed a bit so twitchy.  So I replaced the batteries - the same brand, also the new batteries... and it seemed to fix.  He runs so much better and moving more enjoyable.  But it seems that I need to replace the batteries every day.  It is already to be tense again and I have replaced the batteries and it fixed again.

    So is there some kind of special battery I need?  Or is it simply ridiculous?


    Any way the mouse should require the batteries every two days so I suspect something is
    problem with the mouse itself.

    Wireless Optical Mouse 2000 - 3 years warranty

    Microsoft Hardware warranties

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Anyone having problems with the GENERATED_KEY in CF8 lately?

    Anyone else have problems with the GENERATED_KEY value returned by a cfquery when using ColdFusion 8 and MySQL?

    I'm inserting records in a MySQL 5.0 DB and then enter the result. GENERATED_KEY and assigning my ID of objects field. Nothing spectacular here.

    In my test harness, everything works fine but when I download files to my host I get this error;
    An error has occurred at the request:
    Error code: Server.Processing
    Details of the fault:
    Error string: cannot call CFC - element GENERATED_KEY is undefined in QCREATERESULT.

    I thought that there must be a bug I introduced so I check my code and ensured that it worked on my system and Uploaded the cfc again just to be sure there was nothing broken in transit.

    Always had problems.

    So, I checked the Web and found that the MySQL Connector/J version 5.1.5 has a problem with that. I contacted my provide my Site host and has asked to check the environment that I was for me.

    I was told it is ColdFusion 8 (as it should be.)

    At the beginning when I asked what version of Connector/J server on that I had used on me version 3.51. This is not a version of connector for all those of you who did not have to deal with it. (At least one that would have shipped with CF8.) That sounded more like the version of the MySQL server, but I was supposed to be on a 5.0 Server and my account information specify also the same, so I let this drop for now.

    After having to explain how to find a way to know what the version of the connector was attached their support they told me that it was 5.05 (has happened to the version that I already told him was the version I thought comes with CF8, if I'm wrong.)

    And I asked him to confirm that the DB was version 5.0.

    So assuming that told me the truth. I can't find a reason why the GENERATED_KEY are not returned.

    My CFQuery insert code looks like this;

    < cffunction name = "crΘer" output = "false" access = "private" returntype = 'Cancel' >
    < cfset var qCreate = "" >

    < cfset var local1 = Field1 () >
    < cfset var local2 = Field2 () >
    < cfset var local3 = Field3 () >
    < cfset var local4 = Field4 () >
    < cfset var local5 = Field5 () >
    < cfset var local6 = Field6 () >
    < cfset var local7 = Field7 () >
    < cfset var local8 = Field8 () >

    < cftransaction isolation = "read_committed" >
    < cfquery name = "qCreate" datasource = "datasource" username = "userName" password = "password" result = "qCreateResult" >
    Insert into myTable (Field1, Field2, Field3, Field4, sphere5, case Field6, Field7, Field8)
    < cfqueryparam value = "" #local1 # "cfsqltype ="CF_SQL_VARCHAR"/ >,"
    < cfqueryparam value = "" #local2 # "cfsqltype ="CF_SQL_VARCHAR"/ >,"
    < cfqueryparam value = "" #local3 # "cfsqltype ="CF_SQL_VARCHAR"/ >,"
    "< cfqueryparam value =" "#local4 #" cfsqltype = "CF_SQL_INTEGER" = null "#iif ((local4 eq""), ("yes"), ("No.")) #" / >.
    < cfqueryparam value = "" # locale5 # "cfsqltype ="cf_sql_integer"/ >,"
    < cfqueryparam value = "" #local6 # "cfsqltype ="cf_sql_integer"/ >,"
    < cfqueryparam value = "" #local7 # "cfsqltype ="cf_sql_varchar"/ >,"
    < cfqueryparam value = "" # locale8 # "cfsqltype ="cf_sql_integer"/ >"
    < / cfquery >
    < / cftransaction >
    < cfset variables.objectID = qCreateResult.GENERATED_KEY >
    < / cffunction >

    [No I am not really using Field1, 2, 3 in my code and my password is not actually password, but you get the point].

    Again, this works in my lab. (CF8, MySQL 5.0, Apache, standard Connector/j) That is what it is?

    Personally, I think that my environment is not what it was supposed to be regardless of what I was told. The rep that I was talking doesn't seem to know much about ColdFusion and at the end of the conversation, he said as well and opened a ticket. Not very useful, but at least not rude.

    However, I want to be fair and check all the possibilities. If you see something wrong with my Code let me know that I'm rather crazy eyes will then return to writing queries to get the id.

    Thanks in advance!


    PS: Just before posting this I tried to add < cfset var qCreateQuery = "" / > to the list of the variables just to see if it would change what anyone and it doesn't work. " Still works on my system, but not on them.

    Found the problem.
    The environment has been set up correctly, but the DSN apparently obtained the value a MySQL 3.51 Driver to the administrator.
    It's something that my hosting service, I have no control on however I also don't even think about asking them to check for me either. I forgot that CF has even a version 3 driver for MySQL.

    So my hats off to HostMySite technicians who concluded that, for me and for anyone having the same problem, I suggest you also check the same.

  • Anyone having problems with the new iPhone LTE connection 7 on Verizon?

    I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

    (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

    (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

  • Siri having problems with the connection.


    I have an iPhone 6 Plus, 64 GB with IOS version 9.3.3 (G 13, 34) and the carrier is Vodafone.

    I have problems with Siri, feel when I asked her a task (research or appeal), after a few seconds of waiting, the answer is always "sorry, I have a problem with the connection. Please try again in a moment. »

    I have the right connection with Internet with WIFI and 4G data stream.

    I did reset network settinjg, but I don't see any improvement.

    Please indicate what I can do and if it's a common problem with the iphone 6.

    Thank you!


    After the reset of the iPhone ("home" button and close button for 10 seconds, with the iPhone connected to the computer), Siri works!

    I am concern I have to do this reset every 2-3 weeks if I need services of Siri...

    Good luck to all of you who have the same problems with their iPhone of hares!


  • having problems with the trash icon - documents are not deleted when deleting

    original title: problems with the trash icon



    How to restore the Recycle Bin on the desktop under Vista

    Hope this helps

  • Problem with my wireless printer and a PC.

    I don't know anything about computers so to speak to me like I'm a fool. Here's my problem I have a C4580 All in one printer and an HP Pavilion Slimline s3700y PC. It was a package deal with the upgrade of the wireless printer. Here's the problem "it seems every time I need to print something to the screen on the printer is black. I can not even put the printer off as the symbol of the power stays on. The only way for me to print something is to unplug the printer wait a few seconds, plug it in the screen lights up and back in and I can print. "It happens all the time. No idea of what the problem is? Please help before I throw this thing out the window. Thank you Richard a. Capano

    It is a common problem with the C4580. HP is working on a patch to fix it, and it should be out in mid-March. Hang in there.

  • Problem with a wireless mouse when laptop computer HDMI is connected to a TV

    I have a HP Pavilion G series laptop PC, when I connect to the TV using the VGA interface I have no problem, when I connect to the TV via the HDMI so I have the problem. I use a Microsoft 2.4 ghz wireless mouse, laptop connected to an electrical outlet, new batteries in the mouse, if I move the mouse more than 1 foot of the tower top it becomes useless, erratic, moves 6 inches at a time, or not at all, totally out of control. The laptop is about 2 feet from the TV due to the length of the HDMI cable, and I am sitting about 12 feet out in front of the TV with the mouse. Like I said, no problem if I find the mouse in 1 foot from the laptop and no problems even 12 feet away using the VGA interface. Production of mouse says that the mouse has a range of more than 20 feet. Someone has an idea of what might happen? Last note, I also looked at the use of the processor at the time and it is only 8%. The mouse model number is 3500

    I got it fixed. I replaced the HDMI cable, no change, I tried another TV, no change, I moved the feet 12 laptop away from the TV, no change, bought a Logictech M315 mouse, same technology as the MS3500 and everything's fine. Does a lot for the MS3500 mouse.

Maybe you are looking for

  • Why what can I do about alerts (red triangles) on the photos in photo book?

    Alerts (red triangles) are appearing on many photos - they weren't there when I worked on it a couple of days. "Missing or invalid photo: the full version of the resolution of this photo cannot be located or is corrupt." Please remove from your choic

  • retrieve the missing dll files in Vista

    After starting, I get the messsage App Data\Roaming\new not found next.me\nengine.dll. As a result, the system blocks whenever it accesses a new screen after an early upward. How to restore this software? I have a recovery disc I made when I bought t

  • Installation of Windows Edge 11

    Hello I just bought the 11 Edge with AMD K325 without BONES. Now, I am trying to install Windows 7 Pro via a USB Flash drive. It starts on the USB but when I click Start the installation, there is an error ' CD/DVD driver missing ". I really have not

  • installation of scan on officejet 6500

    I installed this printer printer/scanner/fax combination but when I go to use the scanner it tells me that my computer is not connected.  Can you help me to get it connected? Thank you! Rnutts

  • The risks of the use of registry cleaners

    Let me start by saying from the beginning using registry cleaners is a bad idea, and it is not recommended for the average user. Let's get into the details as to why you don't want to use a registry cleaner. Your computer registry is the brain. It is