I think my neighbors are using my Wi - Fi

Similar Questions

• How to prevent others to jump out of my computer at home, my computer is not secure. My neighbors are using my internet

  How can I change my private computer to keep other form jump out of my internet

  Hello

  Check with your router manufacturer and their forums because they usually have great information.
  Set up a good password for the router and use WPA/WPA2 security.

  Better to use WPA/WPA2 security if they are available and you can hide the SSID that will help
  help others to see the network (note on some routers more hide the SSID)
  causes of connection problems and if they find out the name he is more useful).

  Wireless network general recommendations of security for individuals
  http://theillustratednetwork.MVPs.org/LAN/SoHoWirelessSecurity.html

  Introduction to wireless network security
  http://netsecurity.about.com/od/Hackertools/a/aa072004b.htm

  10 tips for Wireless Home Network Security
  http://compnetworking.about.com/od/wirelesssecurity/TP/wifisecurity.htm

  Securing your wireless network
  http://www.practicallynetworked.com/support/wireless_secure.htm

  How to secure your router Linksys Wireless - similar can be used for other routers
  http://www.pctipguys.com/index.php?option=com_content&task=view&ID=57&Itemid=36

  What are the different wireless network security methods?
  http://windowshelp.Microsoft.com/Windows/en-us/help/b385cc8a-AF25-489e-a82e-decf6df26b681033.mspx#EZB

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How can I get a security code on my wifi neighbors are tapping into my use

  the neighbors are tappin celine my wifi how can I put the security on my computer setting to stop it.

  \

  Hi Becc,

  Essentially, the procedure is to configure the router for the specific appropriate for your router, and your ISP and your computers and intranet security settings.  You do not block your computers, you encode router transmissions so that others cannot use it without the username and password.  Then you configure your computers (or other devices connected) so that they know the appropriate codes and can communicate with the router.

  When I came across this myself, I discovered that the manufacturer of the router charged; However, I discovered that my ISP supports this particular router and they helped me as well with the router and my computer for free as part of their service - so I'd personally start with your ISP to see if they will help you.

  The following article gives the basic instructions for the router (and a few different), but it only covers the router (and not your connected devices) and it indicates the options to use but sometimes 'the best' is not appropriate or accessible with your ISP or router and the computers (which means that it's OK to learn about it in a general sense (, but you need to communicate with people to get the correct settings).  For example I would use WPA2 but my ISP doesn't support WPA is what I use (and if I tried the other it wouldn't work and I would have had no. clue what I was doing wrong and be stuck and confused). http://www.ehow.com/how_6942409_set-up-wireless-router-security.html.  So think of this as simply a presentation guide but use the following instead.

  In short, to access the router, go to any computer connected and click on start / all programs / accessories / right-click on command prompt, and then click Run as administrator.  Then type IPCONFIG/all.  For your first login, you should see a group of settings as a gateway by default (and possible other inputs) referring to a TCP/IP address (usually 192.168.0.1 or something similar to that).  This is the address of your router.

  Open now IE (or your browser) and in the address field where you can type www.microsoft.com, sometimes rather type the address of the router (for example, 192.168.0.1) and enter.  This should connect to the router where it will ask for a user name and password (almost certainly).  If you know, very well.  If this is not the case, the access provider manufacturer or router can help.  Many use default common (which you should change once get you it, but remember).  Certain combinations of username/password common name include admin/admin, admin/password, administrator/administrator/admin password, simply administrator or with any other admin for the password.

  There must be a security section.  Need you probably to get a security Type (WPA-Personal, WPA2-Personal,...), a Type of encryption (for example, TKIP, AES,...) and a security network (password thinking) key.  The first two depend too much from your ISP and the installation program to help me (and you may have different options or more also)-they need to tell you what to use.  The manufacturer of the router can probably help with this - but the ISP knows and can tell you.  Use a key strong you want it is hard to break.  Here is an article on the creation of strong passwords - for this and especially since you know that you used, I would out max and go even a little further than they suggest: http://www.microsoft.com/security/online-privacy/passwords-create.aspx.  I would choose one with 12 numbers which is a random set of letters lowercase, uppercase, numbers, and symbols - but also one you won't forget but that is anyone's guess (that you don't really want to not have to reset it).

  Once set, so even if not recommended by the router or the people of the ISP because if you forgot your password again, they will not be able to help the router becomes a paperweight (but it prevents a person to reset the router using the same stuff, I suggested above to find one that works - if they were not working and you don't need help to identify it) I would consider changing the default user name and password reset so no one can use this method ignores everything and get (even if you notice that and eventually be locked out yourself - and quite well, they will have to have physical access to the router to reset it because I don't think that this can be done remotely).  I did it with mine.  Others choose not to bother because they assume that nobody's going to such extremes and it would make things easier if you needed help more later and I forgot the password.  It's your choice.  I did it because I'm a little paranoid and know that I forget - but for the most part, I suggest they leave alone that can be a bit going overboard.

  Then go to all devices connected wireless or another for the router and configuration, security codes to enable this device (your computers and perhaps a printer or other devices) to access the router and don't not blocked everything as your neighbors now will be.  Go to network connections and sharing, then the list of wireless connections and select the connection of your router and right click and click Properties.  Click Security and three above options should appear.  Change them to match what you used for the router and save the settings.  Now close the connection to the router (if it doesn't what shouldn't be) and re-establish a connection and you may in.  Do same for all devices (printers and other devices probably have special methods to change these settings and you may need help with these providers to find a way to review the security settings to connect to the router - but usually it's really not hard and you can probably work yourself or using self-help on the Web site of the device or the manual if you still have it).

  That's all.  You have now completed and you are sure.  Again, you will need help from the ISP with the parameters (and they can also help you with everything if you ask and you need), but with this exception, most of the time I think that you can usually do it on your own.  Go into the router manufacturer only if absolutely necessary and the ISP will not or can not help and you can't find try it yourself since many of them charge for this kind of thing (unless it is brand new and some even then) and you need information from the ISP in any case as the router manufacturer probably does not know the right settings for each provider (even if they do for many is not reasonable to assume that they know not just less likely to the ISP).

  I hope this helps.  Assuming that this has not already been moved on Windows Networking Forum, and if that didn't do the trick and you need more assistance, please repost it here: http://answers.microsoft.com/en-us/windows/forum/windows_other-networking?page=1&tab=all&tm=1300700638376.

  Good luck!

• Toshiba tools are useful?

  I just bought a new Toshiba Satellite computer and I want to know if the utilities are useful or simply a waste.

  Monitor PCheath
  Eco utility

  Are some of the software installed on the computer and I want to know should just get rid of them to save space and CPU?

  Thank you

  Hey Buddy,

  In General, you can remove all the Toshiba tools you want. It s your laptop and your decision what you install it or not.

  Description of the integrity of PC monitor:
  The software monitors computer system functions such as power consumption, cooling system and sensor of fall of the HARD drive. It alerts users via pop-up messages specific system conditions. It also allows the use of the computer and devices, connecting the relevant service information on the hard drive of the computer.

  Description of the Eco utility:
  Helps you monitor your energy savings by showing real-time approximate energy consumption. In addition, it shows cumulative approximate consumption and approximate when accumulated energy saving ecomode daily, weekly and monthly. You can track energy savings using the eco permanently.

  As you can read them as useful tools that do you think?

• Running game - this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program

  I'm having the same problem that is described in this topic: http://social.answers.microsoft.com/Forums/en-US/vistagaming/thread/f15edea1-f88f-492e-bb42-4db2b06fdf05

  My error message is: "this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program and then contact the software publisher. »

  I tried to run the program in question (Castle of the winds) in each mode of compatibility that is on the list and it is giving me this error message every time. Other people have managed to get the program to work, so I don't know, it does not work on Windows 7, but I can't make it work for me.

  Help?

  Hi autohaptic,

  (a) on the computer what Edition\Version of Windows 7 operating system do you use? What type of system? 32-bit or 64-bit

  If you are running Windows 7 64-bit operating system, you can install the 64-bit computer game program.

  (b) on the computer which the castle of the winds game version are you running?

  I want to clarify, if you try to install the program or trying to run.

  Step 1: Put the computer in a clean boot, and then try to run the game

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  You can consider the right version of the game for your computer relocation program.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• During the installation of Microsoft Flight Simulator 2004, the following error occurs: the version of this file is not compatible with the version of Windows you are using.

  Former title: Microsoft Flight Simulator will not install on Windows 7

  I have Windows 7 Home Premium 64-bit.  I try to install MFS 2004.  The first 3 discs work fine, but when I insert disk 4 to complete the installation, I get the following error message:

  "The version of this file is not compatible with the version of Windows you are using.  Check your computer's system information to see if yo need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  I have a Dell Studio 1558

  Intel i5 - 520 M

  ATI Mobility Radeon HD 5470 graphics card

  8 GB RAM DDR3

  What can I do?

  Hello
  
  1. which edition of Windows are you using? Is - this edition is 32-bit or 64-bit?
   
   
  Given that the game is compatible with Windows 7, I suspect that the conflict can be 32-bit or 64-bit architecture.
  The link below shows the compatibility of this game with Windows 7.
  http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Software&p=Microsoft%20Flight%20Simulator%202004%3A%20A%20Century%20of%20Flight&v=Microsoft&uid=&pf=1&pi=3&c=PC%20Gaming&sc=Simulation%20%26%20Driving&os=64-bit
   
   
  Method 1.
  We must ensure that the edition of the game must correspond with the operating system.
  If you use 64-bit in this game, you need the 64-bit Windows to install it.
  Method 2.
  If the above information matching I you recommend to start the computer in clean condition and then try to install the game.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• If you are using windows it suddenly switches to a blank white screen

  Original title: white screen Syndrome

  If you are using windows, that it suddenly switches to a blank white screen, I can't get except if I use ctrl alt delete very annoying is there a set problem here? help help help

  Hi Yaxleybandit,

  Until solve us the problem I need more information on the issue.

  ·        When exactly do you get the white screen of white?

  ·        This occurs when the computer is idle or while working on this subject?

  ·        It happens when you use a particular program or is it random?

  ·        Did you do with the last changes made to your computer before this problem started?

  Also, you can open check and Event Viewer if there is another error important messages/codes related to the question and after return of the error.

  See the link below for more details:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Post back with the required information.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My neighbor is using my internet. How can I avoid this?

  Original title: internet problem

  My neighbor is using my internet how to stop cela how to remove

  Carrie AnneWhite Hello,

  If your neighbor is using your internet connection and the connection to the router, is not protected by Word. How to password protect it depends on its brand. Another problem lies in the fact that if your router was supplied by your internet service provider they have atendency, well here in the United Kingdom in any case, to put a standard on the router itself password which nobody can see if they pick up and watch. It maybe your neighbor knows someone with the same ISP as you and hads simply connected using the standard ISP password. It's pretty easy to do using a wi - fi connection.

  Contact your ISP and ask them how to change the password for the default security or to consult the manual of the router and manually change yourself. Of course, once you have changed the security password you will need to connect your PC to the router.

  Here are some useful links:

  http://compnetworking.about.com/od/routers/SS/routerpassword.htm

  of past http://en-us-support.Belkin.com/app/Answers/Detail/A_ID/30/~/Setting-the-Router-administrateur-mot

  http://support.NETGEAR.com/app/answers/detail/A_ID/12744/~/how-to-view-or-change-your-wireless-network-password

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer:www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• When installing CD collection national geographic Gets the error, "the version of this file is not compatible with the version of Windows that you are using".

  Original title: the version of this file is not compatible with the version of Windows you are using. Check your computer system information to see if you need a X 86 (32-bit) or X 64 (64-bit) version of the program, and then contact the software publisher.

  I have a large CD collection published by National Geographic. The difficulty lies in the installation of the program that displays the pages. Setup of the program ends. ins.  These Photo CD were produced by mindscape. When you try to contact them, they are based in France, and it is impossible to get support for this product. Is it possible to get the installer on the CD to do its job to provide a way to turn the 'pages '?

  Hello malaglinskom,

  In addition to what Azam offered, you may try the following:

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other software virtualization part 3^rd and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  Hope this information helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• "This version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program.

  Hello

  I seem to be having problems when you try to install a program on my Windows 7 that allows to launch on my Windows XP and Windows Vista. I used the tool to solve compatibility problems and selected these settings in the CONFIGURATION file, but nothing seems to work the error message I get is as follows:

  "This version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program, and then contact the software publisher. »

  Is it possible to set my computer to allow this program to run successfully? Any solution would be greatly useful.

  Hello Rdforbe,

  The problem is a software that was created for Windows 95, 98, and Windows XP has no way to work correctly with an operating system that didn't even exist when the software was written. However, the error message you get normally means that you have a 32-bit software that you are trying to install on a 64-bit system.

  To find out if your computer is running 32-bit Windows or 64-bit, follow these steps:
  System opened by clicking on the button start , by clicking on the Control Panel, click System.
  Under system, you can view the system type. This will describe if you have 32-bit or 64-bit.

  You can also try compatibility mode.

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  Use the following steps:

  (1) right click on the program

  2) click Properties

  3) click on the Compatibility tab

  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other software virtualization part 3^rd and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Where certificates are used on the SAA (8.4)?

  I access a ASA 8.4 running and I need to copy the config to another, she has as a spare.

  All the configuration was coppied well except for this part in the config.

  Crypto ca trustpoint ASDM_TrustPoint0

  registration auto

  name of the object CN = GS2-NT-FIR-01

  Proxy-loc-transmitter

  Configure CRL

  string encryption ca ASDM_TrustPoint0 certificates

  certificate c4999f4f

  308201b 1 30820248 a0030201 020204c 4 999f4f30 0d06092a 864886f7 0d 010105

  05003036 31163014 06035504 03130d 47 53322d4e 542d 4649 522d 3031 311c301a

  ........

  .. lots of HEX

  .......

  quit smoking

  So first of all, I guess that this certificate is for the SSL vpn that is configured on the SAA? Second, it would not copy across (the HEXAGONAL part). But I think that this ASA uses a self cert signed to remedy this I probably have ned to generate a new on this ASA to spare, so how do I do this?

  Thank you very much

  J.

  The cert is self-signed, so you can sign up for one on the second ASA.

  Depending on your config, it might still not be that you are missing relevant parts as many things with the VPN is not in the config a plus. Instead, they are stored in flash.

  To have a backup you can use the ASDM where you have a backup - and restore the features included.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• Hey everyone I think that I've used before, but if I did I forgot how, does anyone know if you can add edge animate in a slideshow or use scrolling text within a slide show effect?

  Hey everyone I think that I've used before, but if I did I forgot how, does anyone know if you can add edge animate in a slideshow or use scrolling text within a slide show effect?

  what I try to do is animate the text on different slides in a slide show, where each slide has different effects and text. If I can't do that, what anyone has any ideas?

  There are several answers to various parts in your question:

  -You can place the edge entertainment in compositions (not in slideshow);

  -Scroll of parts or of the effects of scrolling in a Composition are more difficult;

  (- let slide shows meet your roll is a characteristic third effects Panel).

  The only problem, I expect, is to know how to display 100% width ?

  Slideshows can be presented to the width of the browser, but not of Compositions ...

  And it would be less convenient build all in an animation.

  We overlook something?

• Is it possible to save your project who keeps only files that are used in the order and get rid of files that you do not use?

  my project is at an advanced stage now, a lot of media loaded up and its got to the point where the project keeps "forgetting" his makes (the line goes to yellow when it should be green)

  I assume that this may be due to the face that I have a lot of media loaded upward there now, including many from the effects of exports which should be large enough

  so, I would like to save the project or export the project in such a way so that it retains only the bare minimum of files that im actually... better still, use if she maintained only the part of the files that are used and stripes out of the rest, but maybe it's wishful thinking?

  I also wonder if I could save the project, bringing files in a separate folder, only the files used in the project

  I'd love to, having someone take the time to clear this up for me.  Thank you

  Project Manager in the file Menu

  Backup first carefully!

• Slide show not repeated after that some buttons are used?

  Hello

  I have this slideshow that I am so close after completing, but there is a problem I'm having with it not repeated after that some buttons are used. I tried to understand what could be the cause, but I can't see what it could be. According to me, that I'm so very close to having this if it wasn't for that matter.

  Slide show buttons '1' and '2' work perfectly, however '3' to '6' buttons do not work completely as it should. During the presentation, as he plays through the slides, if you click on the button "1" or "2", you are taken to the corresponding slide and the slide show resumes automatically, which is correct. However, if you click on one of the buttons "3" to "6" you are always taken to the corresponding slide, the slide show does not resume and remains on this particular slide. I looked at the code for the Action Script 3 several times and I don't see what could be causing this but I'm not too experienced so that there could be an error, no matter how minor, that I'm missing.

  I have attached the file and if anyone has any advice at all or can somehow help I would REALLY appreciate it!

  Thank you

  William

  Is your link to the object or picture.  I ran into this many times, I accidentally select the frame and not the object in the slideshow for the link.

  Although he thinks through the problem only comes when you go directly to the frame and not when you play through.  Maybe action that activates the link lights when the object is revealed onstage on a previous frame.  When you jump on the structure with the object already play in the advances head beyond the line of code providing the link and instructions is therefore missing.

  If the code with the link is on frame 10 and the function to move to the slide rests on frame 15, the film would not only go 10 frame, but also actionscript code that frame so lack the instructions to be a link.  Don't forget that this programming happens on a timeline, if the read head misses the keyframe with the instructions, that he will not return to them to find it for you.  Try to make a keyframe a picture before ordering GOTO AND STOP and put another link it so when the playhead crosses the new keyframe the link code is read correctly.

  That's what I'd do to test the theory,

  Good luck

  Brett

• The difference between them and how they are used by the first?

  I'll buy Adobe CS5 Master Collection. I have a job that has Win 7 Ultimate 64-bit. I have a Nvidia CX card that is installed. The Nvidia card came with fast HD. I will also receive a Matrox MXO2 mini for my junction box.

  My Question is what is the difference between - fast HD, elemental Accelerator, technology Max that you can get with the Matrox junction box, and all this will be of use to me or come into conflict with the Mercury playback engine. I don't think I'll buy the Max technology (no not necessary). But I'm confused on the other 3 being redundant or contradictory.

  Can someone please suggest another option for a junction box? Some companies do not support their products if you are using a Dell workstation.

  Any help would be greatly appreciated.

  Thanks in advance for any advice or suggestions.

  Martin

  Post edited by: Mallady1

  RapiHD is the former name of the elemental accelerator. The EA is a PP plugin that uses your graphics card from nVidia (via CUDA, nVidia GPU programming structure) to speed up encoding h.264/AVC output files. The previous link in this thread is wrong, but here is a link to work for the elemental Accelerator. The product is pretty much dead end, so much that it will be not a CS5 version. There is a stand-alone version called lucky, but it requires you to use Adobe products to encode firstly your timeline to an uncompressed AVI file (or any other format), thus defeating the purpose.

  The Mercury playback engine uses CUDA to accelerate the effects, transitions and insight into the chronology PP. It accelerates only marginally encoding, or not at all. There are a lot of threads on this forum discuss the EMT.

  I have a Blackmagic Design card, so I can't tell you anything about the Matrox card and its software.