I tried running sfc/scannow and it does not - it keeps asking me for a CD and my CD in the CD tray

Similar Questions

• Problems with windows update, run sfc/scannow and boot into safe mode. (Vista Home Premium)

  Hi all

  Please bear with me here that I try to explain all the questions I have with my computer right now. I'll try to explain everything that self-organization as possible, but if you need more information or file papers to provide a solution more precise, do it me know.

  To start, I use a HP Pavilion dv6000 series (dv6748us to be exact) with Windows Vista Home Premium (32 bit) installed. (Service pack 2). About 6 months ago I got this laptop from what I believe was the conflicker virus (kept forwarding pages, arrested updates and antivirus programs, etc.) and I managed to get Windows Update works again. My help and Support did not work well, it only worked in Mode without failure, so I did some research and tried a bunch of suggested corrections (update the registry, etc.) and got it work yet once again. I don't know if one of the tools that I used all by setting the Help & Support could have caused problems that I now (as I literally tried everything under the Sun until I got to work), but my Windows Update does not work properly again.

  A few weeks ago, I installed some updates and restarted the computer, but updates did not finish install on reboot. He said the usual "Configuring Updates, do not turn off your computer", but never showed percentage complete or whatever it is. It restarted, and when I open Windows Update, he said the last time I checked the updates has never been (obviously not true), and when I tried to check the updates, it jumped right to the message telling me I have to restart my computer to complete the installation of updates. She continues to do everytime I open Windows Update. From time to time, I try to restart it, just to see if it will work, and he never does.

  I spent hours trying all the solutions I could find in Google. I tried to run system update readiness tool, which seemed to run correctly (but does not solve the problem). I then tried the difficulty it for Windows Update, and it does not solve the problem. (It might be important for me to mention that I also have problems with the difficulty It Center itself, too. Individual tools like that for Windows Update is running, but the difficulty It Center program keeps giving me the error message that "a problem is preventing the troubleshooting tool to start.") I also tried to rename the pending.xml file, and then later I deleted it, after reading in another forum that you rename the file could cause system instabillity or something like that.

  Unfortunately, I can't use system restore to solve all my problems, because all my previous restore points have disappeared (I don't know if the virus wiped out them, or if the computer removed on its own) but restore points only I checked are those that have been created recently, during the time I had these problems.

  I tried running sfc/scannow nothing helped, as he continues to tell me that there is a pending repair, but repair pending never ends. I tried to use the command of /revertpendingactions of dism.exe/image:C\/cleanup-image in the command prompt of recovery center to stop it pending repairs, and that has not worked because it claims that dism.exe that does not exist / is not a valid command. No matter what I try, I can't have this pending repair or my updates to complete pending.

  I tried to boot mode safe several times as well and he hung up on crcdisk.sys when starting every time.

  Being that I can't use sfc/scannow, System Restore, or get into Safe Mode, I'm really lost as to what I should do next. I'm honestly not sure if the problems are related, but I just thought it would make sense to list them all in one place.

  Please note that I don't want to re - install Windows Vista, or don't I think I need, because the computer works very well for most. (I use it for typing this right now). I had much rather bring all the features on mine, which I believe can be achieved with the help of the right person.

  If someone could provide me with suggestions/solutions, it would be greatly appreciated! Certainly, it would relieve a lot of stress for me!

  DISM is a thing of Windows 7. First test the hardware.

  Standard hardware troubleshooting
   
   
  First to test we can the material. Material defects can appear as many software defects, that's why we need to test the material first...

   

  Follow these steps in order. Defects of memory can cause disk corruption, disk failures can cause corruption of the disk. Damaged disc causes corrupted files (which SFC may be able to fix). If you get a stop error and after return. Do not run chkdsk with faulty memory.

   
  Diagnosis of memory

  If you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.

   

  S.M.A.R.T
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
  Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)
   
  WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason List

   

  If it is on will be true, otherwise on enable in the BIOS of the computer.

   

  Predict the failure must be False if everything is ok.

   

  In Vista and later if SMART failure predicted Windows prompts the user to run the backup.
   
  Run chkdsk

  In computer all your drives right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.

   

  SFC

  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   

  sfc/scannow

   

  Heat

  Heat can lead to problems of this kind, and sudden restarts without crashing. Make sure that your fans are not clogged with dust.

   

  For memory diagnostic results

  Click on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools and then Event Viewer , and then look in the event (Local) - Applications and Services - Microsoft - Windows - MemoryDiagnostic-results Viewer entered.

   

  Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-results

   

  Double-click the entry for more details on this entry.

  For results of Chkdsk

  Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.

   

  Look for EventID is 7 and Source disk
  Look for EventID is 11 and the Source disk
  Look for EventID is 50 , and the Source is disk
  Look for EventID is 51 and Source disk
  
  Look for EventID is 52 and Source disk
  Look for EventID 55 and Source is NTFS
  Look for EventID is 130 and Source is NTFS
  Look for EventID is 134 and Source is NTFS
  Look for EventID is 137 and Source is NTFS
  Look for EventID 1001 and Source is Autochk
  Look for EventID 1001 and Source is Winlogon
  Look for EventID 1001 and Source is WinInit
  Look for EventID 1001 and Source is Chkdsk
  Look for EventID is 26212 and Source is Chkdsk
  Look for EventID 26213 and Source is Chkdsk
  Look for EventID 26214 and Source is Chkdsk
  Double-click the entry for more details on this entry.
   
  PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.
   
  For the results of the SFC
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

   

  It will be able to see which files are corrupted.

   

  To see if there

   

  findstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|more

   

  There are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Ignore these.

• Adobe Photoshop Elements 12 for Mac does not in Applications. Tutorial for editing in iPhoto shows by selecting the Adobe software in Applications. Am I missing a step in product registration?

  Adobe Photoshop Elements 12 for Mac does not in Applications. Tutorial for editing in iPhoto shows by selecting the Adobe software in Applications. Am I missing a step in product registration?

  I answered my own question: there is a difference between "Download"and 'install'." Hunting the 'install' (1.5 hrs in my case) and align your passwords, Adobe ID, etc., then install. 15 min. The right choice appears in the Applications. However it is to understand why photo selected for editing in iPhoto does not display in the elements.

• Illustrator does not work, keeps asking to purchase the application.

  Hello, I just purchased Illustrator for a month, but when I go on my creative cloud, I can't use it. He repeated to me that I still need to buy it.

  I closed the application and reopened, but still, it doesn't seem to help.

  Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

• Folio does not load, keeps asking to install the update

  

  Hello

  I can't open the Folio Builder and access or update my folios more.

  Everytime I open the Folio Builder I'm stuck - it asks me to install the updates. I did it (several times), but I keep getting the same MOUSSOKI. By clicking on the link is going nowhere.

  Thanks a lot for your help

  Fabio annovazzi

  If you install the new Folio Builder Panel and continue to receive this error message, there could be a problem with your temporary files. Try to clear your cache folios. To do this on a Mac, exit InDesign and go to [user] > Library > Preferences > StageManager. [channel] > host Local, then delete the subfolders in the folder to the Local host. (If you're in Leo, your file system is hidden by default, but you can hold down the Option key and choose go > library.) Then restart InDesign.

• running sfc/scannow

  Running Windows XP SP3 after you updated through Windows Update of XP of origin.  Tried running sfc/scannow and messages received some files had to be replaced, asking for the XP SP3 installation disc.  I downloaded an ISO of XP SP3 file, it burned on a CD and supplied when prompted.  The disc is a compilation of updates and has not solved the problem.  In another forum (WindowsClub), I was directed to provide a CD of XP SP3 (installation media).  Can anyone provide information on how to solve this problem / get a proper CD?

  Running Windows XP SP3 after you updated through Windows Update of XP of origin.  Tried running sfc/scannow and messages received some files had to be replaced, asking for the XP SP3 installation disc.  I downloaded an ISO of XP SP3 file, it burned on a CD and supplied when prompted.  The disc is a compilation of updates and has not solved the problem.  In another forum (WindowsClub), I was directed to provide a CD of XP SP3 (installation media).  Can anyone provide information on how to solve this problem / get a proper CD?

  CD looking for the file system (CFS) checker is the Windows XP installation CD.  If you need a CD with service pack 3, you must combine sp3 with a CD of full installation that includes sp1, 1a or 2.  If your XP CD is 'original' (i.e. pre-service pack 1), you will need to integrate sp2 (or sp1a) first, then the sp3.  Seehttp://support.microsoft.com/kb/322389

  There are many websites that describe the procedure to be followed.  Here are a few:

  http://www.winsupersite.com/showcase/xpsp3_slipstream.asp

  http://www.theeldergeek.com/slipstreamed_xpsp3_cd.htm

  http://www.ZDNet.com/blog/hardware/creating-an-XP-SP3-slipstreamed-ISO-file/1848

  http://www.webtree.ca/WindowsXP/slipstream.htm

  The two most popular utilities for "slipstreaming" are

  NLite http://www.nliteos.com/nlite.html

  Autostreamer http://www.neowin.net/forum/topic/223562-autostreamer-1033/

• SFC.exe find corrupted system file and confirms the determination of repair at the next startup. but are still present after running sfc scannow new windows 8

  I run sfc/scannow;  results. resource protection finds files corrupted and managed to fix it. System file repair changes will take effect after the next reboot. but after the restart without change, I run sfc/scannow and files are always corrupt

  system not finish booting and stuck at halfway. Also the programs would not open. I had installed some drivers from the Asus download site. before it began. so I uninstalled it, but no help, then I ran the SFC scan who gave me the message about corrupted files, I ran a system restore and everything works although now I have same re installed all the updates except some Akami download which was also offered on the Asus downloads thanks. for your quick response

• HP Pavilion Slimline 400: Cannot run SFC/scannow

  I have a PC with Windows 8.1 x 64 which does not run the "sfc/scannow" command of HP Pavilion Slimline 400 desktop. When run from a CMD prompt window ("run as Administrator") the result returned is:

  "Windows resource protection could not start the repair service."

  I restored Windows 8.1 at the factory of HP with the same result.

  I tried using 'Online Dism/Cleanup-Image /RestoreHealth' and get:

  Maintenance of the images of deployment and management tool
  Version: 6.3.9600.17031
  Error: 11
  You cannot service a 64 bit OS with a 32-bit version of DISM.
  Please use the version of DISK that corresponds to the architecture of your computer.

  Anyone can get an idea as to why ' sfc/scannow' and the DISM command does not work?

  Thank you.

  I suspect that the recovery partition is corrupt and that it would have to use HP recovery discs.

  If you want to order and if you live in the USA/Canada, call this number 1-800-334-5144 HP and see if you can still get a set of recovery disks.

  I have another solution that doesn't cost anything.  You can download and burn an ISO of Windows 8.1 from the following site.  He won't get the HP software or bloatware, is a commercial version.  Have on hand your license key:

  http://www.eightforums.com/tutorials/18309-Windows-8-Windows-8-1-ISO-download-create.html

  If you can, back up your data.

• I have a problem with the running SFC/scannow?

  My computer is Windows XP Pro SP3. I want to run sfc/scannow, but was prompted to insert the CD of the operating system; my installation CD original authentic is Windows XP Pro SP1, which I've updated online to SP3. Does this mean that I can never run sfc utility because the two service packs are different? If you cannot run the sfc, is there a way to bypass the request for the installation CD? Is it possible for sfc replace the corrupted files or folders with a good the INF, I386 or Swsetup folder (forgive my ignorance)? I would be grateful to anyone offering a solution.

  You will need to open regedit and navigate to-
  EntVersion entVersion\Setup

  Double click on the "ServicePackSourcePath" key and change the value to read-
  %windir%\ServicePackFiles

  You may also change the SourcePath to C:\

  I can't double check what I slipstreamed sp3 in my installation cd.

  Make sure you have backed up the first key in regedit, go to file, choose export, choose office, once it is saved on the desktop, then you can change to test CFS.

• When running sfc/scannow, it says: error system3_.exe

  Original title: error system3_.exe

  When running sfc/scannow, it is said

  Microsoft Windows XP [Version 5.1.2600]
  Copyright (C) 1985-2001 Microsoft Corp.

  C:\Documents and Settings\Administrateur > cd\

  C:\>sfc/scannow
  Windows file protection could not initiate a scan of protected system files.

  The specific error code is 0x000006ba [the RPC server is unavailable.
  ].

  any suggestion?

  Thank you

  We need to back up a bit and get more information...

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

  What is the problem you are experiencing that you think that sfc/scannow will correct?

  See if the remote procedure call (RPC) Service is running.   If it is not executed, it should run and many other things will not work if the RPC Service is not running.

  To do this, click Start, run and enter in the box:

  services.msc

  Click OK to launch the Services applet.

  Locate the remote procedure call (RPC) Service and see what he says in the status and Startup Type columns.

  If the RPC Service is not running (it must be), right click, choose Properties and see if you can start and change the type of start to 'automatic '.  If you make adjustments, click the OK button to save your changes, restart and make sure the settings "stick."

• Is it OK to run SFC Scannow several times with days of each other?

  Vista Home Premium 32 bit

  As if you run it and then he ran two days later. Does the operation close the last time things mess up?

  Also does sometimes erronously indicate that the files are not fixed, when in fact they are fixed?

  You have to reboot twice after running SFC/scannow?

  Safe to run.
   
  A common false positive is a text file called settings.ini which stores the settings of the sidebar. If you have added a gadget or even started it the file will change, because it should remember your settings. SFC foolishly think it is corrupted.
   
  Note that false positives are all files small text based content can change. If it points to a binary file (exe, dll, etc) then it is a problem because the binaries do not change.
   
  If these two commands show nothing, then there was nothing wrong.
   
  The newspaper regularly gets deleted because it is mainly used by Windows Update. So, run these commands directly after sfc runs.

• I can't save any file type. I tried a sfc scan, and it tells me that there is a problem in c:windows\Logs\CBS\CBS. Newspapers, but when I tried to look for these files I refused access.

  Original title: cannot save files

  Hi I am unable to record any type of file. Save/open appears and it seems save (all be it very quickly), but when I look for it, he could not be found or I get a message telling me that the shortcut is not found. I tried a sfc scan, and it tells me that there is a problem in c:windows\Logs\CBS\CBS. Newspapers, but when I tried to look for these files I refused access. I use Vista and Explorer 8.

  I hope someone can help x

  You're right, it's too long to post here. I tried to send mine here. No go.

  I only suggest:

  1. use Windows Live Skydrive to transfer the cbs log. Then send us a link in the newspaper.
  But apparently you don't have SkyDrive.

  SkyDrive is free and is part of the Windows Live products. Consider installing it.
  Here is the link:

  http://explore.live.com/SkyDrive

  2. I am a member in Vistax64 Forum. (Don't let the 64 not dissuade you. It does not the 64-bit mesn.)
  http://www.Vistax64.com/#Vista-forums

  I have no problem sticking my cbs newspaper there.
  If you want to sign up and post the log for help.

  3. I am also a member Windows Client Tech Center. You can sign up and post there with the CBS.

  Windows Vista IT Pro: Windows Vista Applications Forum.

  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/threads

• RUN [sfc/scannow] nets-"Insert your Windows XP Pro Svc Pk 3 CD Now"

  HP a1630n stand-alone office / XP SP3 Mrdia Ctr ' 05
  "Insert your Windows XP Pro Svc Pk 3 CD Now" as a result of [RUN: sfc/scannow] evolve from 'operation failed' in a pop - up indicating [files Win needs runs properly have been replaced by unrecognized Versions. Victory should restore the debtor files - insert CD XP Pro SP3 CD now. ]

  Note found in Googling: WARNING: do not attempt to use this guide to integrate your disk of Windows XP Media Center 2005. This version of XP's "Slipstreaming" is not supported by Microsoft. IT IS MY XP... My folder C:\i386 noted aid things to do was EMPTY...

  How we create such a XP SP3 CD such as specified? HP has that a Partition D: and no. XP Recovery install disks BUT offered a chance to make 2 DVD double layer is to create BkUp 1 day. Either would be wihthout XP3 to my Nov ' 06 HP a1630n Desktop.

  Repeating the failures of recent installation Office ' 03 Excel security update KB2597086 (18 updates Succeeded) gave rise to the use of MS Fixit, Dial-A-Fix, ComboFix, clean boot attempts my PTSD MS remote control of my office, cleaning many clothes-out membresdans Device Mgr by personnel of the seller PTSD-er, reinstall XPSP3 (314 MB) & IE8 on prior and Office Detect and repair.  Update of security KB2597086 by Manuel Dnload-Install gives error 1402 'cannot open the registry key; Check permissions. The last MS FixIt found and repaired corrupted registry keys BUT no change in the work of installation GOLD [sfc/scannow] security update. Registered CCleaner registry Scans have been merged All Back but didn't ' help-affect anything.

  Any thoughts appreciated!

  Thanks for the reply.

  I resolved to go to Win 7 and a new laptop - and the grief of new and better.

  Short of your Start-from-scratch approach, I am convinced that this update never install with my machine, as it is now, and Error 1402 with the Office repair, re - install and uninstall. ................... All the best!

• When I run "sfc/scannow" he gave the following results; "windows resource protection found corrupt files but was unable to fix some of them

  * O.T. AND NON-RESPONSE ERROR

  Hi, my laptop (Dell vostro) has been very slow lately, when I run "sfc/scannow" he gave the following results; "protection of resources windows found corrupt files but was unable to solve some of them"

  How ca I fix it please help

  Select Start, all programs, accessories, right-click right-click command prompt and click Run as administrator in the menu dropdown. Type or copy / paste: findstr/c: "[SR]" %windir%\Logs\CBS\CBS.log > '% userprofile%\Desktop\sfcdetails.txt' and press the ENTER key. You will find a sfcdetails.txt file on your desktop.

  "Please note there are three spaces in the command: findstr - c/c/c, between [SR]" and%windir% between CBS.log and > ' % userprofile .

  Please download a copy of your file sfcdetails.txt on your OneDrive as a shared file and post a link here. Enter sfcdetails.txt in the search box above the Start button and press the ENTER key to locate the file created.

  Note The Sfcdetails.txt file contains details of every time that the System File Checker tool has been run on the computer. The file contains information about the files that are not repaired by the System File Checker tool. Check the date and time entries to determine the problem files that were found last time that you ran the System File Checker tool.

  For assistance OneDrive see paragraph 9.3:

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• Windows 7 troubleshooting error 0x8E5E0247 after running sfc/scannow

  I'm having this problem of solving the problems of network connection. I ran sfc/scannow, and the results are that Windows Resource Protection finds corrupted files but was unable to fix. What should I do now?

  Hello

  Don't forget to run checkdisk so

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =====================================================

  The errors may not have something to do with the problem you are experiencing:

  Check the Option 2 here:

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Many files that SFC cannot resolve are not important.

  Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

  put the command from below (copy and paste) in this box and her and then press ENTER.

  findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt

  who creates the sfcdetails.txt file in the folder that you are in when you run it.

  So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228 and http://support.microsoft.com/kb/929833

  This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
  here. NOTE: there are probably duplicates so please only post once each section error.

  You can read that the journal/txt files easier if you right click on Notepad or Wordpad and then RUN AS ADMIN-
  then you can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs)
  According to the needs. (You may need to search sfcdetails.txt if it is not created in the default folders.)

  I hope this helps.