I tried to look at my device manager and go this message MMC cannot create a snap

Similar Questions

• Empty Device Manager and for error message "cannot create the enumerated device root need to install Parallels paravirtualization pilot".

  Original title: Device Manager empty

  I have Windows XP Service Pack 3 installed in a Bootcamp partition on my Intel iMac. I can detect and install new hardware such as USB keys. However, the Device Manager window is blank - how can I get the window to display the devices connected to the computer? I am also unable to install Parallels tools when I use Bootcamp as a virtual machine. The error message "cannot create the 'root-enumerated device' necessary to install Parallels Paravirualization driver.

  Hey Harcjk,

  For your first question, go through this article.

  None of the items appear in the device list manager when you open
  http://support.Microsoft.com/kb/311504

  For the second question, here are some suggestions:

  Method 1: Uninstall & install Parallels tools

   

  NOTE: we highly recommend you make a backup of the virtual machine before you continue.

  a. start your virtual machine and cancel the installation of Parallels Tools Wizard.

  b. Click Start--> Panel--> Add / Remove programs and remove the Parallels tools in the list of applications.

  c. restart Windows.

  d. install the Parallels tools by clicking on the Virtual Machine--> install the Parallels Tools.

  Method 2: Uninstall antivirus software

  If the problem persists, try the following:

  Temporarily uninstall all the antivirus software to the virtual machine and repeat steps of the "Uninstall & install Parallels Tools" section above.

  Note: Don't forget to install the back antivirus software, once the problem is resolved.

   

  Method 3: Uninstall, clean & install Parallels tools

   

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

   

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  a. If the problem persists, try the following:

  b. start Windows.

  c. go to "Start" > "Control Panel" > "Add/Remove Programs" and uninstall theParallels Tools if it is present.

  d. go to 'my computer' > 'C' drive > "Program Files" > "Parallels" folder and delete the "Parallels Tools" folder, if present.

  e. click the Windows 'Start' menu-> 'run' and type 'regedit'. Click OK.

  f. in the registry editor, go to "My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Parallels" and delete the heading "Parallels Tools" and go to "My Computer\HKEY_CURRENT_USER\SOFTWARE\Parallels" and remove the 'Tools' section.

  g. restart Windows.

  h. now install Parallels tools in the 'VM' menu on the Parallels Desktop menu bar, while Windows is running.

  I hope this helps.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blue indicator of Win 7 circle network ALSO hang Device Manager and MSE does not

  I have a strange problem since the recent windows updates.

  Indicator of network in the bar tasks displays a blue circle for about 20 minutes after I start the computer. During this time I can't run regedit, I can't open the Device Manager, and I can't seem to activate the protection in real time to Microsoft Security databases. However all the time I have internet and network access.
  After about 20 minutes the light will come back normal (sometimes it goes through a Red Cross first), date at which the computer then runs everything normally, if I have my phone on, I get the auto run screen, Device Manager works and I can also start MSE.
  It's as if the computer is waiting for something to happen. Device problem? However, all devices appear to work normally.
  The latest updates, I made were optional for monitor HP and Microsoft mouse and a keyboard, both of which work well in the era of 'blue circle '.
  I also tried updating the adapter software.
  It is not important, but it's annoying!

  Hi Carmen,.

  The blue circle on the network icon indicates that the system is looking for a network connection.

  If it appears at the start, then start the modem and the router before you start the computer.

  Method 1:

  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Step 1:

  Check if the problem persists in safe mode with network.

  Check out the link:

  Startup options (including safe mode)

  http://Windows.Microsoft.com/is-is/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  If the issue is not still in safe mode, and then start the clean boot computer to determine if a third-party program is causing the problem. To configure your computer to clean boot see the following link.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start as usual after a clean boot troubleshooting" under more information to prepare the computer to start as usual after a repair.

  Also check the link for more information:

  Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/en-in/athome/Setup/optimize.aspx#fBid=_dBb8lcqecd

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Treo 800w not found in Device Manager and does not connect to ActiveSync

  I just got my Treo 800w and I have ActiveSync it once.  After that, I had a lot of trouble trying to get activesync to say that it was connected to the computer.  After doing some research on Google and help forums looking around, I discovered that the Treo should appear in my device manager when you are connected to the computer.  I went to my device manager and of course, it wasn't there.  After a lot of time trying to make it work, I found that the best thing to do is remove the battery and plug it in again.  Then the computer will find again.

  However, I also learned what was causing my problem and I don't know if it's a windows or a problem of palm, but it is a question.  If you connect a Treo 800w on a WinXP (I don't have Vista so I don't know if this problem exists) and even if you touch it connected the power button on all Windows POPs a message saying a USB device has malfunctioned and will cease to recognize the device.  I then told my wife (the main user of the Treo) to never touch the power button and even less the Treo at all while it is plugged into the computer.

  If this question has already been posted... I'm sorry that I'm not looking for it...

  If you read my entire post it says I already found the solution.  Try all the things you listed didn't work for my problem.  I write only because I believe that it is a bug/problem with palm or windows and the device.  Take the battery, put the battery back in, and reconnect the unit is the only thing that works.

  I also tried to uninstall ActiveSync, reboot, install ActiveSync and the battery... it works too, but it's much faster to just remove the battery then put it back and reconnect the device.

  To answer your other question on ActiveSync Yes, I've got 4.5.

  Message is about: Treo 800w (Sprint)

• Satellite Pro L300: WLAN isn't in Device Manager and is missing

  Hello

  I have a Toshiba L300 which I've downgraded from Vista to months ago WXP. So I decided to stay with Vista and when I installed Vista the WLAN was missing in Device Manager and it didn't work. I tried to download drivers Toshiba download drivers adapters and don't always work. Only my Ethernet is showing in Manager device... btw, I have a Realtek WLAN

  Also, my VGA graphics card didn't seem to update driver and when it does it is said that the system is below minimum specifications.
  It's so weird in Windows XP Home edition, it was working fine... All solutions?

  > I tried to download drivers Toshiba download drivers adapters and don't always work.
  Does that mean exactly? Have you installed driver WLAN or not? Wireless network adapter correctly installed and listed in device as a card Realtek WLAN Manager?
  How do understand you?
  You have problems to install the wireless network adapter or configure the WIFI connection?

  If the wireless network adapter is installed correctly activate the card with the WLAN switch and then use the FN + F8 key combination and make sure card is set on IT.

  Which driver to install display? What version?

• Download "Bluetooth device driver not installed." with my mobile phone in Lenovo laptop. I could also see a yellow mark on this device in the Device Manager and a code 28 error

  I have a very serious problem about Bluetooth. And it's really frustrating. I don't know exactly what the problem with it, but my problem is as follows

  When I connect my mobile phone via Bluetooth for laptop (win 7 ultimate), my system shows the connection. Also, I see my mobile phone listed in the device window. Earlier, when I brought the computer laptop, everything seemed good, at this time, when I use it to open the device (IE to control ); a window would show the option for playing music (there was a lot of option as a 1 ' headset and speaker") and other services supported by the device. but now, suddenly somehow window appears but with in a 2 sec to disappear again. Whenever I try to open the device I get this error. I must say that it is very very frustrating as you try to move your cursor to click on audio playback on this portable display option, the window disappears. Help, please. Now, let me tell you what I tried to solve this problem.

  I have laptop Lenovo, which has something like that for bluetooth

  Broadcom Bluetooth 4.0 USB

  Microsoft Bluetooth enumerator. I have 32 bits of the system, processor i3, win 7 ultimate, one port wifi

  In the center of troubleshooting, I tried for the material of scanning that show this Bluetooth device driver not installed (I could see a yellow mark on this device in the Device Manager and a code 28 error).

  But windows cannot fix it.  I have tried multiple devices but nothing turned up. also I tried the same devices on different laptops and all of them worked very well.  I checked online trouble - shooting.but not very useful. Please don't tell me about recovery. I don't know when it happened.

  Please help me. Please give me link if there is no download needed

  Original title: bluetooth

  Hi Roger,

  You encounter the error code 28 in the device to any device manager if the driver for this device is not completely installed on your computer. I suggest you to update the bluetooth adapter driver and check if it helps.

  Refer following article which contains steps of troubleshooting for bluetooth related questions and see if the problem is resolved:

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

  Note: Ignore the title of the article and also to find additional troubleshooting steps under the "more information" section.

  Please come back if you face problems related to Windows and we will be happy to help you.

• I have hp laptop with built in webcam I went to Device Manager and it not on a day it is next day it not

  I have hp laptop with built in webcam I went to Device Manager and it not on a day it is next day it not

  Hello

  ·         What is the brand and model of your laptop?

  Method 1:

  Try running the fixit from the link next and if it helps: http://support.microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Try to update the drivers for your webcam and check if it helps: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

• DVD drive icon has disappeared from the Device Manager and my computer

  DVD drive icon disappeared from the Device Manager and my computer. I m using window 7. How can I get it back.

  Ashwani Hello,

  Thanks for posting on Microsoft Community.

  There are various reasons why a CD or DVD drive may not be detected. I would like to ask all of the steps in the Microsoft Article describes a troubleshooting and check if they help to resolve the issue.

  Your CD-ROM or DVD drive is not recognized by Windows or other programs

  Note:

  Before editing a registry key or subkey, we recommend that you export, or make a backup copy of the key or the subkey. You can save the backup copy to a location that you specify, for example, a folder on your hard drive or a removable storage device. If you make changes that you want to cancel, you can import the backup copy. For more information about backing up the registry, please see the link below.

  How to back up and restore the registry in Windows

  Hope that advice is useful. Let us know the State of the question, so that we can guide you further.

• I suddenly have a problem when you try to download I get this message. "Cannot transfer to Internet Download manager." 0x8002801D error

  Error of the IDM

  I suddenly have a problem when you try to download I get this message. "Cannot transfer to Internet Download manager." Error 0x8002801D in windows XP. Pleasw help to y for remedy.
  Thank you

  Hello

  (1) what you're trying to download?

  (2) how you try to download?

  (3) what browser you are using to download?

  (4) don't you make changes to the computer until the problem occurred?

  Step 1: This error occurs when your browser and IDM are set to run under different privileges.

  Maybe you have set to run IDM with administrator rights. This is not correct. IDM Ouvrezledossier if please, right-click on 'IDMan.exe', select the 'Properties' menu item, switch to the "Compatibility" tab and uncheck the checkbox "Run this program as Administrator" (arrow 2 on the image). In addition, you must remove the compatibility with previous versions of Windows if there is none activated (arrow 1 in the picture).

  

  If this does not help, try to do the same for the executable file of your browser. In addition, turn off the feature with older versions of Windows and "Run this program as Administrator" checkbox.

  Step 2: You may need to run IDM with administrator once rights to register its DLL files. Exit IDM using "Tasks-> output" of the main menu. Then right click on IDM launch icon in the Windows (arrow 1 in picture) programs launch menu and select "Run as Administrator" (arrow 2 on the image).

  

  Then exit IDM again and run normally.

  Hope this information is useful.

• I tried to set the parental control and received this message: because this computer is connected to a domain, Parental controls are not available.

  I have the internet Charter.  I am a home user.  I tried to set the parental control and received this message: because this computer is connected to a domain, Parental controls are not available.  Again, I am a home user.  What does that mean?

  Hello

  1. which user account you are using for Parental control (Please note that you cannot apply parental controls on a user admin account? It can be applied to standard user only accounts)?

  2 have you made changes on the computer before this problem?

  I ask through the following article to find out how to set up Parental controls:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/parental-controls

  http://Windows.Microsoft.com/en-us/Windows7/set-up-parental-controls

  After completing the above links persist issue please fallow the mentioned below of the methods.

  Method 1: Disable UAC (User Account Control) and check the result
  See http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-the-behavior-of-user-account-control-by-using-the-slider

  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.

  Important: Enable UAC after you complete the steps.

  Method 2: If the problem persists, try to set the parental control in safe mode and check the result. If you are able to apply settings in safe mode, this means that some program is causing this problem, mainly the security software.
  See http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode  

  Hope the above information is helpful.

• Impossible to install World of Warcraft and the error message "Windows cannot access the specified device, path or file. May not permissions to access you the item.

  Original title: Need help ASAP please

  Hi all

  I am currently running windows 7 and recently I met a problem that has been giving me the error code: 0 x 80070043 and the Error Message: Windows cannot access the specified device, path or file. You can't have appropriate permission to access the item'. When you try to run a Setup.exe for world of warcraft. But the thing is I am the administrator of the computer and have not had this problem in the neck, it is their all settings or something I can do to fix this? any help would be greatly appreicated thanks and God Bless.

  Hello Jay,
  Thanks for posting your question in the Microsoft Community forum.
  The description of the problem, I see that you are unable to install World of Warcraft and error message "Windows cannot access the specified device, path or file. You can not have appropriate permission to access the item".»

  This problem may occur if you do not have permissions for the file or the location of the file, if the file is located on a site that is not accessible at the moment as a network location or an external drive that is not currently connected to the computer or your antivirus software may block the file.

  Don't worry; Let's try a few steps that will help you solve the problem.

  Method 1:
  I suggest you run the fix it and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
  http://support.Microsoft.com/kb/2669244
  You can check the links for more information:

  Install a program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Install programs: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/installing-programs-frequently-asked-questions

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• I tried to update photoshop cc (2015) and received this message: download erro (49)

  I tried to update photoshop cc (2015) and received this message: download erro (49)

  Sure.

  You can Contact Customer Care as technical troubleshooting may be required.

• I've been using Lightroom 5 about 1 & 1/2 years and he lost everything last night, as I install it. I tried to use time machine and I get this message; 'Applications' cannot be modified or deleted because it is required by OS X. Any help or suggestion

  I've been using Lightroom 5 about 1 & 1/2 years and he lost everything last night, as I install it. I tried to use time machine and I get this message; 'Applications' cannot be modified or deleted because it is required by OS X. Any help or suggestion?

  Hey Mohit & John,

  I just restarted since a lightroom 5 top date & he got almost all of my files!

  Linda

• I'm trying to update to CC (2014) and get this message: 'failed to install. Setup has encountered an error. Restart your system and try again. (15) I did the reboot, the same problem.

  I'm trying to update to CC (2014) and get this message: 'failed to install. Setup has encountered an error. Restart your system and try again. (15) I did the reboot, the same problem.

  Help!

  I solved this problem by replacing the applications folder and the Adobe folder in the library - folder of Application support with the files from before the last update of Mavericks using Time machine.

  It worked for me.

• Pavilion 17-g103dx: No. Bluetooth adapter in the Device Manager and parameters

  Hi HP support! Someone can help me please to know if my HP laptop has a bluetooth adapter or not? I want to connect a Bluetooth to my laptop but cannot find 'Bluetooth' under 'Settings' or 'Device Manager '. The model of my laptop is HP Pavilion 17334 (model # 17 - g103dx).

  I ask HP support to confirm please if my laptop has an integrated or not Bluetooth adapter?

  If there so let me know the solution to fix it.

  I am able to see the Bluetooth Service running and also tried to install the Bluetooth driver, but the Bluetooth is nowhere.

  Thanks in advance!

  No bluetooth according to the HP product:

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx/c04929132.PDF

  Suggest a usb bluetooth dongle:

  http://www.Amazon.com/plugable-Bluetooth-adapter-raspberry-compatible/DP/B009ZIILLI/ref=sr_1_3?ie=UTF8&QID=1454851189&SR=8-3&keywords=USB+Bluetooth+dongle

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.