I tried to sync with the new firefox Sync and I get an error "unknown error."

Similar Questions

• Don t work under El Capitan and I don't get an update/upgrade? I've used until yesterday an old MacBook pro and Lion, everything was perfect with an opening. Now, with the new element (iMac) and El Capitan, I have problems.

  Don t work under El Capitan and I don't get an update/upgrade? I've used until yesterday an old MacBook pro and Lion, everything was perfect with an opening. Now, with the new element (iMac) and El Capitan, I have problems.

  It is not possible to update the version of Aperture is 3.4.5

  What can I do?

  You can only update if you have a version of the AppStore of Aperture - if your version of Aperture appears in the history of your purchases on the App Store. Update and then reinstalling.   See this tip of the user for more details:

  Update to Aperture 3.6 after the publication of Photos

• How to maintain the availability of the data store after the upgrade to ESXi 5.1 with the new IP address and the naming convention?

  How can we maintain access to the presented LUNS and VMFS data store after we improve the ESX in ESXi with the new naming convention and the new model of IP addressing?

  My back-end SAN EMC Clariion is VNX

  Thanks in advance.

  How are the hosts connected to storage systems. With FC HBA for example, there is basically nothing you need to do since the WWN will remain the same and so LUN presentation of the zoning on the switch and storage system does not need to be reconfigured.

  André

• I'm trying to send some pictures of my photos and I get this error message

  I'm trying to send some pictures of my photos and I get this error "host 'SMTP' could not be found. Please check that you have entered the server name correctly. "Account: 'POP3', server: 'SMTP', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0D" can someone help me

  What email program are you using? Unless you use an e-mail client, start a new message, and then attach the photos.

• I try to go to the website of tomtom and I get an error message DNS-cannot find server.

  I try to go to the website of tomtom and I get an error message DNS-cannot find server.  I tried the computer desktop and laptop and do not know what the problem is. I thought it was the Web site, but I could put my internet work top. Help, please.

  How your internet connection are connected, if you use Proxy, then try to uncheck bypass for local addresses...

  If you use a direct connection without proxy, even try to open in another browser, firefox IE, if its opening try to update the browser to your desktop computer.

  Thank you & best regards

  Alex k

• Make a right click on the folder responds slowly and sometimes get an error "windows does not.

  original title: pc maintenance

  Make a right click on the folder responds slowly and sometimes get an error "windows does not.

  Make a right click on the folder responds slowly and sometimes get an error "windows does not.

  This could be due to so many things. Malware, applications in resources, solutions anti-virus, hard drives damaged, damaged file system, processor ram capacity limitation...

  can't tell what your problem exactly, you can use the reliability monitor, event viewer to discover additional problems...

  What does it mean when a program is not responding? http://Windows.Microsoft.com/en-us/Windows-Vista/what-does-it-mean-when-a-program-is-not-responding

• What Yahoo Toolbar is compatible with the new firefox 12

  I can't find a yahoo toolbar that is compatible with the new Mozilla Firefox 12 I downloaded on my laptop. Firefox continues to advise me not to prosecute each download I try. Thank you

  This post has a button "Allow" on this subject?

  You should be able to press this button and install the toolbar.

  The message is that you install an add-on that is not the official firefox add-ons site. That's fine, but firefox is just warn you that it happens. Without that WARNING malicious websites would be able to install the modules without your knowledge. It's just a check to ensure that you had intended to install an add-on.

  I hope this helps. Let me know if the button allow does not work.

• Qosmio G10 with the new graphics card and pcb - CD update tools do not work

  Hello world

  I hope you can help me. Before a few weeks, I received my Toshiba Qosmio G10 return of aid, because the laptop no longer works. So I get it back with a new graphics card and a new PCB. With my laptop I have a CD called the update tool CD and a sheet of instructions, where it says to start with this tool CD-Rom update after you have installed the Windows with the reovery CD.

  So I did, but when I know the update tool CD to put in and I start with it, the computer installs something, but after a short then it is a message that it is a different model and that I have to put a button to close Notepad. So I did it, but Windows does not start.

  Why is it so? I had done everything that has been said on the instruction sheet.

  Please help me

  Hello

  It will be interesting to find more information on this CD-Rom tool update. Are there tags Toshiba? Can you please write what is described here?

• My windows 8.1 does not work with the new Firefox update. It worked before the upgrade. How can I fix it?

  After Firefox updated itself automatically, Firefox would not work. I couldn't go online on Firefox because it doesn't open at all. The old Firefox worked.

  You may have seen this article during the process to submit your question, but just in case:

  • Difficulty of problems connecting to websites after Firefox update

  Are you familiar with Windows Task Manager? It allows to determine whether Firefox is present in memory and to cease so that you can try to start again.

  To access the Task Manager, press Ctrl + Shift + Esc. You will need to approve the program to make changes to your system. The 'Applications' tab usually has an entry for every visible window. I guess that Firefox will not be there, but if it is and you do not see the window, it's a different problem.

  The "Process" tab will list firefox.exe if Firefox is running in memory, or if it has started and stalled. If it is just sitting there, click it, and then use it button end process to kill him.

  Then, try to start Firefox in Safe Mode. It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  Hold down the SHIFT key when you start Firefox.

  A small dialog box should appear. In the dialog box, click on 'Start mode safe' (not reset).

  Does it work?

• Losing the history with the new Firefox Ver 10

  I'm angry that FF seems to update versions without any warning, that is to say I have no word to say as to when I have to spend extra to deal with a new 'look' / version. It is inconsiderate to the users as we do not always have free time at a time that suits to the FF.
  How can Q: I:
  (a) ensure that the FF does not give me a new version unless I ask you?
  (b) when he gives me a new version, always my complete history with her? (I regularly use 'history' as a memory audit trail.

  With this worm 10 I lost so much time as:
  (a) he lost my historic trail and Windows I left open specially
  (b) and 'help' suggested I have restart the laptop to see if it could re - finding the story - he could not
  (c) new versions we said this, look how pester on it, sometimes I'm just to busy at this time!
  Wow! -See all troubleshooting information that can be supplied with this question - impressive.

  Fast, comprehensive and very helpful - thank you. The 'advanced update' bit already fact (would have taken me a while to find - and if I knew that these were!), let Xmarks until later... Thanks again

• I'm not able to open a new tab manually. I tried to click on the new tab button and going to file and clicking on new tab. This is the case since 20:00 02/10/2011.

  I have been using Mozilla for about 4 years and never had any problems by opening a new tab manually. But since yesterday, I am not able to do. I even uninstalled Firefox and then re installed. No change.

  Try to disable or uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar, following a security update in Firefox 3.6.13

• Can not find the driver for Deskjet 4180 with the new MacBook Pro and OSX10.9.4

  I can only find 4100 series that does not install.

  Ideas?

  Hi sensho.

  Welcome to the HP Forums!

  I see you are trying to find the driver for your HP Deskjet 4180, with a new MacBook Pro with OS X 10.9.4, and I am happy to help you with this driver issue!

  Please take a look at this website, OS X Mavericks v10.9: installing and using the printer on a Mac.

  Hope this is what you are looking for and have a great day!

• upggrading a windows xp pro service pack 3 with the new card mother and pure install using the original disk of xp with service pack 2

  I have an auto build Windows XP pro with service pack 3 that is upwards and I feel the need to upgrade to a new motherboard and processor causes memory and I know that when I do a clean install with my original disk, I lose service pack 3 that will then lose me the Microsoft support is anyway that I can backup service pack 3 for use with what will be considered a brand new computer

  See you soon

  The site is authentic.  You have two options when you do your relocation:

  Method 1

  1. Download SP3 form the Microsoft site and burn it to a cd or copy it to a flash drive.
  2. Reinstall Windows with your original Windows XP CD.
  3. Use the copy of SP3 that you burned on the CD or copied to the flash drive and update the machine to SP3.  Note that if you have an original CD of 'gold' of Windows XP without service pack that you install SP1a or SP2 before you install SP3, SP2 is available here , download and save it with SP3 before making your relocation.

  Method 2

  1. Download SP3 from the Microsoft site and it wake to your Windows XP CD.
  2. Install Windows XP with your slipstreamed CD and your installation will be in SP3, when installation is complete you will not need to install service packs, you'll just have to do some other updates that have been released after SP3.

  The http://lifehacker.com/386526/slipstream-service-pack-3-into-your-windows-xp-installation-cd is legitimate, it only gives you instructions on how to create and burn a CD of SP3 slipstreamed Windows XP.  If this seems too daunting then use method 1 to install Windows.

  Both methods are very good but method 2 allows a nicer cleaner installation, everything is installed to SP3 level and there are no remnants of previous service packs.  While creating the slipstreamed CD may appear to be a time consuming task, in the end, it will be a time saver and afterwards if you ever have problems with the installation of Windows you may need this cd SP3 slipstreamed to all repairs on the installation.  You can create the SP3 cd now and do it ready and at hand for future needs.

  John

• Problems with the new modem DSL and Linksys BEFSR41

  My Speedstream modem died and I had to buy a new modem.  At this time of year, it is difficult to find exactly what I wanted and I ended up buying a D-Link DSL - 2320-B.  I got the Linksys BEFSR41 (old version 1, I think) for years and it has always worked well.  I have problems to get an internet connection through the router.  With the modem connected directly to the network card, as now I have no connectivity problem.  I had to change the IP address on the Linksys BEFSR41 192.168.2.1, as the modem is 192.168.1.1, 192.168.0.1 as the old Speedstream.  I couldn't see a way to change the IP Address of the new D-Link.  I have my ICS TCP/IP set to auto obtain IP and DNS.  I was previously created for a fixed IP of * provided by the router.  Even with the setting on the router to "Obtain an IP address automatically", I can't to the internet with the router in the middle.

  Any help will be appreciated.

  Your modem is a combination of the modem and the router. The problem occurs when you try to connect another router behind this configuration and end up having 2 servers dhcp and nat 2 (for port forwarding and other issues, creating in some cases where even branded products use ip addresses will clash and devices will not connect at all when him are interconnected).

  To avoid the situation described above, it is recommended that you enable the full Bridge mode on the modem / router that you currently connected to the internet and let your new wireless router controls all the functions within your local network and the internet connection (you must enter all the details in the new router, including Internet service provider username and password).

• Help with the new card mother and Vista problem?

  So yes, I got a new card mother and cpu, it seems to work fine except the loading of windows! I said to reinstall vista, however, my computer never came with a vista CD, it was already installed. all I have is restoring 3 DVD. What I could find on the internet is a: A: I need to spend money for a BONE

  b: use linux

  work of the restore cd to reinstall the OS, so I can use my new motherboard?

  So yes, I got a new card mother and cpu, it seems to work fine except the loading of windows! I said to reinstall vista, however, my computer never came with a vista CD, it was already installed. all I have is restoring 3 DVD. What I could find on the internet is a: A: I need to spend money for a BONE

  b: use linux

  work of the restore cd to reinstall the OS, so I can use my new motherboard?

  Hey icuhavoc

  are recovery disks to reinstall vista with the original hardware installed if I understand you correctly know what records you need to know a set of manufacturer's recovery disks

  If it is pre-installed this is an oem license and does not change unless you did it in consultation with the manufacturer of models of motherboards and processors

  Walter, the time zone traveller