I try to enable Microsoft XP on a laptop and can't access the Internet to activate.

Similar Questions

• can not access the internet even if my wifi connection status is "enabled", I go to another user and am connected, get updates and others and have the ability to nav.

  Windows 32-bit Vista on a HP laptop, wifi is on State is enabled and still on the past of the main user unrelated real, even when the State is supposed to be activated, I went my way, any other user and get the updates to download and other connect ability.  Can someone help me change it's for a 76 year old mother, who gets very nervous sometimes with the laptop that I gave him, help me please... Stevielee

  Hi Stevielee,
   
  1 you get an error message when trying to go online?
  2. what web browser do you use to go online?

  You are able to go online to a different user account. There must be a problem with the settings of the web browser. Try these steps and check the result.

  Step 1: Reset the Internet Explorer settings.
  1. Click Start, type inetcpl.cpl and press to enter.
  2. click on the tab advanced and then click Reset.
  3. click on reset.
  4. When you are finished, click Close, and then click OK.
  5. close Internet Explorer and reopen it before the changes take effect.
  6. check internet connectivity.
   
  NOTE: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
   
  For more information on "Tips for solving problems with Internet Explorer", visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-Internet-Explorer

  Step 2: If the problem persists after you follow step 1, try to correct the user account.
  Difficulty of a corrupt user profile: http://windows.microsoft.com/en-US/windows-vista/Fix-a-corrupted-user-profile
   
  Try the steps and post back with the results, so that we can help you further.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• When I try to open an attachment text I only get the microsoft office Picture Manager icon and can't click on anything

  When I ry to open an attachment, I only get the microsoft office Picture Manager icon and can't click on anything to view the file, which must be a text document.

  When I ry to open an attachment, I only get the microsoft office Picture Manager icon and can't click on anything to view the file, which must be a text document.

  What is the extension of fixing this "text"?
  The last 3 letters of the attachment is the file extension.

  If the last 3 letters... are doc, you need Microsoft Office Word or Microsoft WordViewer.
  Here is the link to MS Word Viewer: this is a free program.
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=3657ce88-7cfa-457a-9aec-f4f827f20cac&displaylang=en

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• internet access - I always get 'pending on the cache' when you try to access the Internet

  Why do I always get 'pending on the cache' when you try to access the internet

  Hi reneamayo,

  1 Windows operating system you are using?

  2. what browser do you use?

  3. If you are using Internet explorer, what version of IE are you using?

  4. When did you start to question?

  If you use IE, then you can try to run the Fixit mentioned in the link below and check:

  Improve performance and security in Internet Explorer

  http://support.Microsoft.com/mats/ie_performance_and_safety/

  You can also check out the following link and try the steps:

  How to remove the contents of the temporary Internet files folder

  http://support.Microsoft.com/kb/260897

  Hope this information is useful.

• Update from Microsoft that I can't access the updated analysis screen.

  Where do you find the page analysis of Microsoft update in the new web page?

  How can I bypass the required internet page explore downloads and automatic updates of mandates be turned on? With this on the first page, that I can't access the analysis coming update screen.
  Thank you
  Gary

  Hi, Gary.

  Disable automatic updates in Windows XP

  http://www.theeldergeek.com/disable_automatic_update.htm

  Windows Update

  http://www.update.Microsoft.com/microsoftupdate/v6/vistadefault.aspx?ln=en-us

• I want to install my office small business 2003 on my new laptop but can't find the installation cd. I have all the license information. Can Microsoft help me to make it work on the new laptop? Thank you.

  I want to install my office small business 2003 on my new laptop but can't find the installation cd.  I have all the license information.  Can Microsoft help me to make it work on the new laptop?  Thank you.

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon. Mick Murphy - Microsoft partner

• I use Windows Live Mail and when I access the contacts screen I get an error message "Not responding" when I try to access anything whatsoever.

  I use Windows Live Mail and when I access the contacts screen I get an error message "Not responding" when I try to access anything whatsoever.

  Hello Brenda,.

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

   

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• You try to run a Site to site VPN and remote VPN from the same IP remotely

  We currently have a site to site VPN configuration between our offices call center and a 3rd party that allows them to access our training to their employees to use environment while being trained on our systems. This tunnel is running between our ASA and their ASA without problem; However, when we have managers come out to the call center, they are unable to use remote VPN to access our office.

  Apparently the same IP peer remote that we use for our site to the other tunnel is the same IP that our managers use to access the internet when they are on-site with the customer. When I look at the logs it shows the VPN attempt and then I get treatment Information Exchange has failed. So from what I can understand when our managers are trying to connect to our firewall from the same IP address as the counterpart of site to site it automatically tries to create a tunnel, according to the information of the site to the other tunnel. If our managers are anywhere else, they can connect through remote VPN with no problems.

  My question is if anyone knows of a way to make the firewall allow VPN site to site and remote connections with the same remote IP address.

  Hi John,.

  Basically, in older versions, when you hit a static encryption card and you does not match this static encryption completely map the connection continues until the dynamic encryption card. For this reason, you can connect your IPSec clients before. A bug has been opened on this vulnerability.

  CSCuc75090  Details of bug

  The crypto IPSec Security Association are created by dynamic crypto map to static peers

  Symptom:

  When a static VPN peer adds all traffic to the ACL crypto, a surveillance society is based even if the pair IP is not allowed in the acl to the main façade encryption. Are these SA finally put in correspondence and commissioning the dynamic crypto map instance.

  Conditions:

  It was a planned design since the first day that allowed customers to fall through in the case of static crypto map did not provide a necessary cryptographic services.

  The SA must be made from a peer configured statically and a dynamic crypto map instance must be configured on the receiving end.

  Workaround solution:

  N/A

  Some possible workarounds are:

  Configure a static nat device when you try to use the remote VPN if the firewall remotely will be hit with a different public IP address. It would be a good solution, but it will depend on how many ip addresses public you have available, if you really want one of these ip addresses for that access.

  Also, I thought you could use AnyConnect instead of the IPSec VPN client. I don't know how many users need to connect from your PC to the remote site, but the ASA has 2 licenses SSL available that you could use. Because Anyconnect uses the SSL protocol, it won't have a problem on your environment.

  Below some information:

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa84/configuration/guide/asa_84_cli_config/vpn_anyconnect.html

  Hope this helps,

  Luis.

• I'm currently developing apps on my creative cloud. My account has two subscriptions and I am trying to use one of them, but after that download the message of "no subscription found" apps will appear when you try to license. How can I access the apps? I

  I'm currently developing apps on my creative cloud. My account has two subscriptions and I am trying to use one of them, but after that download the message of "no subscription found" apps will appear when you try to license. How can I access the apps? I use a Mac

  Hello

  Please see connect and disconnect activate Cloud Creative applications

  Advanced solutions for connection with Adobe Creative Cloud and Creative Suite applications errors

  Concerning

• When you try to crop an image in Lightroom develop I get a blue screen of overlay and can not see the image

  When you try to crop an image in Lightroom develop I get a blue screen of overlay and can not see the image. I uninstalled and reinstalled but same result. How can I get this reset to display the selected image and handles of the crop?

  Go to your Lightroom preferences, the performance tab and uncheck the box "use GPU processor."

• Error: 303: unable to load a resource: can not access the resource file (try loosening Flash security)

  Error: 303: unable to load a resource: can not access the resource file (try loosening the Flash security settings): error #204 in shockshare.com and putlocker.com any help please?

  When I was watching a movie... There was a link, I always watched movie shockashre and putlocker.com but today, I saw this problem and don't kno how to solve

• Only when I try to connect to the hotmail Web site, internet explore said that he can not access the Web site?

  I was able to access hotmail account every day except today I tried several times to connect to the site on the Web page, but internet Explorer comes up with the error message that it cannot connect to the Web site.  I tried a diagnostic check on my end, and nothing seems to be wrong.  I can access other Web sites.  I tried the suggested methods to clear my browser which has been online on the microsoft answers site.  Nothing has done so far.

  Status of Hotmail:
  https://status.live.com/detail/Hotmail

  For now, it is said there is a problem:
  "Hotmail is having connection problems. You might see an error message when you try to connect. »

  You can try to check your email at a later date.

  For the taking in charge of Hotmail:

  http://windowslivehelp.com/product.aspx?ProductID=1

• Access to a specific registry key (HKEY_USERS\S-1-5-18\software\Microsoft) causes a BSOD. How can I fix the key?

  Original title: access to a specific registry key generates BSOD. How can I fix the key?

  Scans the registry in XP causes a BSOD. The wrong key is HKEY_USERS\S-1-5-18\software\Microsoft. Access to manually also causes a BSOD so I can't delete or export it. I do not have a restore point from before the problem started. Other than the access to that key or run a search, XP works well.
  Is it possible to fix this?

  Not having no not this error in my notes (in other words, I've not seen at least 2 times), I Googled it and first fell on a MS KB article:

  http://support.Microsoft.com/kb/810558

  This article includes this statement:

  Contact Microsoft Technical Support to help heal the corruption in the registry.

  I think that is where you are right now, so let's see what is the response of the Microsoft Support Engineer, now that there is more information.  I always love to see what they have to offer first.

  Why and how did you change the system restore to create restore Points 3 a day for 30 days (FYI - that is not the same as a backup).

  If you were to solve some problem at the time, what was the question?

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  In the meantime, I would run a chkdsk /r on your volume XP since XP Recovery Console.

  If you are not sure of the SP2 CD you have is an XP bootable installation CD authentic and not some kind of restore CD for the Dell system to 100%, I would recommend this (that I've seen more than 2 times):

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Unable to connect to the main DNS server when you try to access the internet

  Computer has worked fine for the year last until 2 weeks ago and now unable to connect to the internet.

  Windows Vista on broadband and services connected directly to the modem by ethernet.  Provider Internet has run tests and confirmed modem is fine and it's like my laptop runs very well on it.

  Re-initialization of the modem, internet works and you can type in a few places and it seems OK, but you can't do anything on a site, it is, enter the details and even if you try and enter anything, you can usually view 2 sites and then it goes again.  However, the network icon shows that on and connected to the internet.

  The diagnosis, it is said that he cannot access the primary DNS server.

  Do you have any idea how I can fix this or should I just completely re - install windows from the original disk set?

  A few things you can try...  [This will be the Windows to try to automatically fix your connection]

  Open 'Network and sharing Center' (you can search for it in the Vista Start menu)

  Under tasks, click on "diagnose and repair".

  If this fails, you can try...  [This will use the NETSHell utility to RESET your network interface (removes all static configurations and sets DHCP)]

  Open a command prompt (you can also search for it on the start menu in Vista, if you have this OPTION enabled, you need to start as administrator)
  The type of command line: NETSH INTERFACE IP RESET. JOURNAL

  If you still have problems, try to post your IPCONFIG/all, file HOSTS and ROUTE PRINT on this forum.

  How to:

  IPCONFIG/ALL
  Open the command prompt and type: IPCONFIG/all
  To save the output to a file simply type at the command prompt: IPCONFIG/all > filename.txt

  Your HOSTS file is located in the following path (the HOSTS file does not have an extension, it is simply named "HOSTS"):
  %windir%\system32\drivers\etc\HOSTS
  or
  C:\Windows\System32\Drivers\ETC\HOSTS

  ROUTE PRINT
  Open the command prompt and type: ROUTE PRINT
  To save the output to a file simply type at the command prompt: ROUTE PRINT > filename.txt

  PS: If it becomes really hairy, you can provide NETSH DUMP (this provides virtually all network configurations)... You certainly shouldn't need to re - install Windows.  There is probably a setting of network configuration problem that causes this problem.  Good luck!

  -Rob

• Error: "DNS server not found" when you try to access the internet.

  original title: network WIFI DNS connection issues

  Hi all

  This is my weirdest experience with WIFI connections so far. So let me explain.
  I have several WIFI connection to my modem/router that work very well, 2 phones and 2 laptops work just great, wirelessly.
  Now I have this new ASUS wireless adapter to my PC and it gives me a headache, and the ASUS support... Well, what kind of support?
  When I turn on my pc, my pc connects to the router with full connection bars. But there is no internet, I'm getting DNS SERVER NOT FOUND, this happens every time when starting of the pc. But when my pc has already started and then I reset the router, I get internet with good working DNS and then everything works. But of course, when then restart my pc again, it loses DNS and I can restart the router once more...
  I have tried everything I know, manual setting of DNS does not work, renewing the ip and dns cmd of hot flashes do not work either.
  My setup
  ------
  Windows 7 Professional x 64
  ASUS PCE - N15 11n Wireless card
  DHCP enabled
  Dns and ip automatic (ip4/ip6) parameters
  ------
  I really hope that you guys can help me, it drives me crazy and the problem continues to exist for a month now.

  Hello Serellyn,

  Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the internet connection:

  Take a look at step 6 in this article. He further explains this problem as possible:

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx

  If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider.