I try to get an update of the software update, but he kept saying ' this phone (Iphone 5 s) is not onger connected to the internet while I am using internet.» Please help me understand why.

Similar Questions

• my laptop stops when I connect to the internet, please help

  whenever I turn on the internet my laptop stops and it does not matter if I use it wireless or cable, stop it anyway please help

  Hello

  1. Do you receive messages before you close them?
  2. The problem occurs when the laptop connects to the network, or an Internet connection is established?
  3. What is the brand and model of the router?
  4. Who is the ISP (Internet Service provider)?
  5. What is the brand and model of the laptop?

  Method 1: Try to reset the router and see if that helps.

  Note: help on resetting the router, please consult the manual that came with the router or router contact manufacturer.

  Also the updated firmware for the router on the router manufacturer's website.

  You can also refer to:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Method 2:

  I might suggest to run a full scan with your anti-virus/anti-malware software installed on the computer and see if you find something. If necessary you can also use the Microsoft Safety Scanner:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please post with the State of the question.

• My laptop with Windows Xp does not connect to the internet, please help me!

  Then my laptop, as indicates it works on Windows Xp, but even if I'm supposed to be connected to my home network, when I run Internet Explorer, it can not connect to internet. Any help and insight will help. Please help me!

  I'm sorry that had to retype all of this, but in essence, that everything indicates that things work correctly with your Internet connection.

  To translate, the first bit tells us that your router assigned your computer 192.168.0.12 IP address.  The own IP address of the router is 192.168.0.1

  The result of ping 127.0.0.1 indicates that your computer can communicate with itself (the adapter is OK)

  The 192.168.0.12 ping result indicates that your computer can communicate with your router (that we already knew because otherwise your computer don't would not have been assigned an IP address).  It also means that you are connected to your local network.

  The result of the ping 192.168.0.1 is similar to the 127.0.0.1 test.

  And finally, the ping Google result shows that you are able to access the Internet.

  Knowing all this, you probably need to reset TCP/IP or Winsock, or both.

  Manually:

  Open a command prompt window and type

  netsh winsock reset {enter}
  netsh int ip reset c:\resetlog.txt

  Or see these two articles from Microsoft, include the two "FixIt" links
  How to reset Internet Protocol KB99357 How to determine and recover from Winsock corruption 811259 KB 2

• can not get on Skype has tried to login, but it kept saying cant connect

  cant get on to Skype attempted to connect, but kept saying unable to connect

  Could be your firewall, malicious software or a system configuration problem.  Can we get your system specs and you get the error messages?

• Please help me understand why these links to internal pages do not work!

  Help, please!  I feel pretty clueless why the internal links do not work on this page in question: http://pclake.com/banquets/info/accomodations.html

  I inserted a few JS to highlight the tags < h2 > which works fine on these pages...

  http://pclake.com/banquets/Info/FAQ.html

  http://pclake.com/banquets/info/vendors.html

  Any help would be greatly appreciated!

  You have used html ID more than once on the page.

  When you link to an id (essentially an anchor), it will go to the first on the page, that is, the buttons themselves.

  You need to set your credentials, either remove the links IDS, or change the IDS used in the elements later in the page.

  EDIT: You need to run your page through the validator to http://validator.w3.org to clear all errors in your HTML (42 errors 5 warnings).

• Need help to understand why my downloaded PDF doc displays "Please wait...". If this message is not finally replaced with the appropriate content... "after that I have already downloaded the version update for windows 10

  Need help to understand why my downloaded PDF doc displays "Please wait...". If this message is not finally replaced with the appropriate content... "after that I have already downloaded the version update for windows 10

  This is because the PDF file is not be open in Acrobat or Reader, but by the browser which is unable to handle the specific PDF content.

  If you use Firefox or Chrome, follow these steps: https://helpx.adobe.com/livecycle/kb/xfa-forms-firefox-chrome.html

• Please help me understand how to install updates with the following error updated Message__The following have not been installed: __Security update for Microsoft XP KB 2289162

  Please help me understand how to install updates with the following error Message

  The following updates were not installed:

  Security for Microsoft XP KB 2289162 update

  See the section "How to get help" of http://support.microsoft.com/kb/2289162

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance: https://consumersecuritysupport.microsoft.com/

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Whenever I try to download a file from the internet it get the same message everytime "he could not open the Internet Explorer Web site.

  Loading of the Internet

  Whenever I try to download a file from the internet it get the same message everytime "he could not open the Internet Explorer Web site.  The site requested is either not available or cannot be found.  "Please try again later ' this happens for all sites, I try to download from... Please help.

  Hello

  To work around this problem, follow these steps:

  1. start Internet Explorer.
  2. on the view menu, click Internet Options.
  3. on the Advanced tab, clear the do not save encrypted pages on the
  disk check box.
  4. go to the page where you received the error.
  5. right click on the file link, click on save target under, select one
  destination and then click Save.
  Good luck!

• Help me get on the internet please

  I recently upgraded to windows7, but when I updated the stored file my internet information disappeared.  Now I can't get my computer on the internet.  The information is stored on my other computer (via the internet connection wizard) but not in a readable file.  How can I check my internet connection on my computer that accesses the internet, so I can use the computer has been upgraded, without resetting the router.

  Hi johnnyshea

   

  1. exactly the information are you referring to?
  2. are - that you talk to the service provider information broadband?
  3 have you tried to contact the suppliers of internet services for the connection works correctly?
   
  You can refer to the links below and check if the information provided allows-

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  I hope this helps.

• When I try to get HP support assistance it won't let me and says that I need to change username, but I'm the user, very confused!

  When I try to get HP support assistance it won't let me and says that I need to change username, but I'm the user, very confused!

  Hey Dorf,

  To provide the proper resolution, I would need more information on your side.

  1. How did you try to contact the HP Support?

  2. What is the exact error message?

  You can check the link for more information about how to contact HP technical support.

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.

• Whenever I try to download a file, I get a message that the internet explore has encountered a problem and need to close. Can someone explain why this is?

  Whenever I try to download a file, I get a message that the internet explore has encountered a problem and need to close. Can someone explain why this is?

  What Service Pack for XP are you running?  You use Internet Explorer 7 or 8?   If so, you can try this article to see if it solves your problem:

  "How to reset Internet Explorer settings"
    <>http://support.Microsoft.com/kb/923737 >

  HTH,
  JW

• I lost some of the folders in the library.  They exist in the Explorer solutions, but somehow got removed from the library.  I can bring them back in but I'm afraid it will happen again in LR.  Please help me understand what happened and how can I prevent

  I lost some of the folders in the library.  They exist in the Explorer solutions, but somehow got removed from the library.  I can bring them back in but I'm afraid it will happen again in LR.  Please help me understand what happened and how can I prevent the recurrence. I use Win7.

  A few possibilities:

  1 > you click with the right button on the files and chose to remove them from Lightroom.

  2 > you have created a new catalog, and records that are not part of another catalog.

  Each of these scenarios seem like they could be a possibility?

• I really need someone to help me. I tried to figure out how to select a PDF to convert a Word doc. When I go to select a PDF file, all that comes is the WORD documents. doesn't show ANY of my PDF files... Please help me understand wh

  I really need someone to help me. I tried to figure out how to select a PDF to convert a Word doc. When I go to select a PDF file, all that comes is the WORD documents. doesn't show ANY of my PDF files... Please help me understand what is happening? We put it on automatic renewal so I know it's not that we have not renewed this subscription, because we pay automatically.

  Hi olivias,.

  Looks like there may be some confusion on your system which application should be associated with PDF files. You can reset the file name associations by following the steps described in these articles (depending on your operating system):

  How to change the default application for a file type. Macworld

  http://Windows.Microsoft.com/en-us/Windows/change-default-programs#1TC=Windows-7

  Please let us know if you have any additional questions.

  Best,

  Sara

• I tried to open my creative cloud and he said, it has been updated, but there was no progress. Then I tried singing and signing in and there is still no progress. Can someone help me please?

  I tried to open my creative cloud and he said, it has been updated, but there was no progress. Then I tried singing and signing in and there is still no progress. Can someone help me please?

  After the closure of these processes you can restart your machine and try to install creative cloud.

  Waiting for your response.

• SQL * MORE using command START - please help me understand

  Hello dear friends,
  
  I encountered a problem that I don't understand. Could you please explain to me what wrong with my logic.
  
  I created the file called DUMMY.sql sql
  the file context is:
  
  SELECT a model
  OF dummy_tbl
  WHERE dummy_col = & dummy_var;
  
  I'm going to SQL * Plus DB version (10.2.0.4.0).
  
  I command promt: MODEL of STARTING 1
  and waits * & dummy_var * must be replaced by * 1 * and query executed as described in Oracle SQL * MORE reference ([http://download-west.oracle.com/docs/cd/B12037_01/server.101/b12170/ch6.htm#sthref1058 | http://download-west.oracle.com/docs/cd/B12037_01/server.101/b12170/ch6.htm#sthref1058]).
  
  But instead, I'm getting enter the value for dummy_var:
  
  Please help me understand
  
  Thanks in advance.

  You must use 1 & instead of & dummy_var.

  The number refers to the position of the parameter to use; 1 is the first parameter & 2 would be a second parameter and so on.

  SELECT dummy
  FROM dummy_tbl
  WHERE dummy_col=&1;