I try to install a file on my computer and I am getting "setup.exe has stopped working".
all I can see on a google search is more than 3 years old and all the proposed solutions do not work
I tried a right click and as an administrator, I tried to run in compatibility mode and I tried to disable the startup programs and services - and I'm still having this problem
is there a more recent fix for the problem?
Hello
always check the compatibility of vista programs on the link below
http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx
Tags: Windows
Similar Questions
-
Setup.exe has stopped working, try to install Allods Online, the new MMO
I'm having a problem with my setup.exe Allods... I can't seem to run. It is said that setup.exe has stopped working
a problem causing the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
I tried to change the compatibility settings, I tried to run as administrator (Yes it's Vista! surprise...) and I tried the Msconfig.exe to fix.
I'm desperate... It's the signature of the problem below. Signature of the problem
Problem event name: APPCRASH
Application name: setup.exe_unknown
Application version: 0.0.0.0
Application timestamp: 4a2ae2a2
Fault Module name: RichEd20.dll
Fault Module Version: 5.31.23.1228
Timestamp of Module error: 4791 has 775
Exception code: c0000005
Exception offset: 0001e469
OS version: 6.0.6001.2.1.0.768.2
Locale ID: 1033
Additional information 1: fd00
More information 2: ea6f5fe8924aaa756324d57f87834160
Additional information 3: fd00
Additional information 4: ea6f5fe8924aaa756324d57f87834160Additional information about the problem
Bucket ID: 1718522889Please just ask for more information.
Check it again. http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx
Windows Vista Compatibility Center
First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/
If this is not Vista compatible, read the info on the link above.
It works for some programs, but not all.This applies to software programs, NOT hardware drivers.
If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe
Run as Admin
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the above does not fix it:
It comes with Vista, upgrade install and activate Forum.
http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads
They will help you with your question in Forum Vista programs at the above address.
See you soon.
Mick Murphy - Microsoft partner
-
When you try to install labview 2011 or 2012 on a windows machine 7, I get a message "setup.exe has stopped working". I tried to run setup.exe as an administrator with the same results. I have Microsoft .NET Framework installed on the affected machine 4.5.1. Could be the cause of this problem? Or does anyone know the root cause of this error?
Hi - are you getting it at the beginning of installation, during or after 100% progression ended?
Is it fair to LabVIEW you install, or is it drivers too, in this case, what was the last big package that has been installed at the time?
This can be caused by the NVIDIA chipset driver:
https://decibel.NI.com/content/message/46299?TSTART=-130
Thank you
Sacha -
I'm trying to uninstall a printer, but only part of it was uninstalled, there are 2 parts more than the necessary printer uninstalled and I get the message setup.exe has stopped working
Hello
· Faced with this problem specific to uninstalling the application with the printer, or with another application?
· What is the brand and model of the printer?
You can follow the method below and check if it helps.
Method 1:
I would say as you put your computer in a clean boot state and check if it works.
How to troubleshoot a problem by performing a clean boot in Windows
http://support.Microsoft.com/kb/929135
Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 on top of the kb article.
Method 2:
I suggest to install the application printer again and then try to uninstall it, if only the problem is specific to the printer.
http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program
Hope this helps,
-
Error 'setup.exe has stopped working' when installing Quicken.
Original title: setup.exe has stopped working
I have read through the related forums and don't think I've seen a solid answer to this problem. I'm trying to reinstall Quicken on my Dell Inspiron 530 Vista with service pack 2. (Long and ugly tells how he got deleted at first - thank you, Intuit).
When I try to install Quicken, I get the above error message. I tried the clean boot solution; I tried to enter the installation and execution of the exe directly from there; I tried to do a right click to open/run as administrator... etc.
I have NOT run BigFix.com or other third-party software to solve this problem - I'm very comfortable with another piece of software download and throw into the equation. What is a corrupted registry and I have TO run third to fix? Is it a bug of Vista - is there a fix of bug for her?
I really don't like that to 'guilty' at this point, I just want to repair and recover my electronic payments! Help, please!
Hey, Keenon,.
Please, remove all existing components of Quicken from the computer and do a fresh install.
Step 1: use QcleanUI uninstall Quicken
Follow the instructions in the article below for more information on how to use this tool.
The use of QcleanUI to uninstall Quicken
Step 2: Install QuickenRefer to this article for installation help.
Installation of Quicken on Microsoft Windows 7 or Vista
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Hello, I recently bought torchlight 1 for my pc, Windows 7/Vista. Ive had my pc stop repeatedly. I contacted technical support of Torchlight, sent files Dxdiag and msinfo, after reviewing, the suggested running in safe mode, but, after having tried 2 times, each time, got a dialog box stating "" torchlight exe has stopped working '. " When I send a tech, their eval was as follows:
Looks like it's a question of system rather than a question of the torchlight. I say this because, as the game has been started in SafeMode only the windows system files are loaded into memory. So, when Torchlight.exe attempts to access these files with torches can not due to a problem with your file system. At this point, the only options are the following:
(1) create a new user profile and attempt to play the torches of this new profile.
(2) depending on how long it's been since your last windows installation costs, you can try to repair windows to resolve any system problems of files or reformat your PC
(3) contact the Support technology Windows to help your application for stay of troubleshooting problems.
Using technicians on site for your comments, is their a problem with my Windows 7?As torchlight works perfectly on my Windows 7 x 64 laptop, I suppose that "it is a question of system rather than a question of the torchlight", too. Especially when your system shuts down instead of simply display a message on a program "stopped working", brings us to this conclusion.
The most common causes for a corrupt Windows are "optimizers" of sorts (registry cleaners, etc.), the over-zealous antivirus programs and incomplete software installations. This can affect your overall performance of the system, not only the proper functioning of a game, so reformatting/reinstall or restore an unchanged system image from backup may be the safest advice.
-
All files .exe has stopped working
Whenever I try to open a program I get the * *.exe has stopped working. This is on firefox, windows media, nero, games player, etc.. The only way for me to open anything it must be run as an administrator will search for virus with spyware doctor™, malicious software with malwarebytes' Anti-malware and registry with Regcure errors. but nothing works any help.
Here's what werFault.exe said on some programs.
Signature of the problem:
Problem event name: APPCRASH
Application name: Hoyle Puzzle Games.exe
Application version: 0.0.0.0
Application timestamp: 562b029a
Fault Module name: StackHash_6bc7
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception code: c0000005
Exception offset: 04554e40
OS version: 6.0.6001.2.1.0.768.2
Locale ID: 1033
Additional information 1: 6bc7
More information 2: f3f6a1403802118ada460cd45530935b
Information additional 3:6477
Additional information 4: d34edb9b57aa7d1aac3252e1a9591198Signature of the problem:
Problem event name: BEX
Application name: FreeCell.exe
Application version: 6.0.6001.18000
Application timestamp: 47919e59
Fault Module name: StackHash_6bc7
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception offset: 04554e40
Exception code: c0000005
Exception data: 00000008
OS version: 6.0.6001.2.1.0.768.2
Locale ID: 1033
Additional information 1: 6bc7
More information 2: f3f6a1403802118ada460cd45530935b
Information additional 3:6477
Additional information 4: d34edb9b57aa7d1aac3252e1a9591198Problem signature:Signature of the problem
Problem event name: APPCRASH
Application name: NeroExpress.exe
Application version: 9.0.9.100
Application timestamp: 48d36d6b
Fault Module name: StackHash_6bc7
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception code: c0000005
Exception offset: 04554e40
OS version: 6.0.6001.2.1.0.768.2
Locale ID: 1033
Additional information 1: 6bc7
More information 2: f3f6a1403802118ada460cd45530935b
Information additional 3:6477
Additional information 4: d34edb9b57aa7d1aac3252e1a9591198Exception code: c0000005
Check please the RAM to find errors. Please download memtest86 + [1] write a new bootable CD (use a CD - RW if possible) of ISO (download and use ImgBurn [2] for this), restart your PC and scan your RAM 4-5 h to find errors.
André
[1] http://www.memtest.org/download/4.10/memtest86+-4.10.iso.zip
[2] http://www.imgburn.com/index.php?act=download
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/ -
Development in error "Installer.exe has stopped working" while installing the new modem. I try to install the ZTE AC8710 modem on my 32-bit windows vista (home edition) system, but whenever the facility is subject to the full I get the error 'Installer.exe has stopped working' and complete Setup doen't. The same error is hit when I try to uninstall the ZTE modem that is installed intestinal. The installation file has CD/install drivers for windows vista. Information below is displayed in the application event viewer for this error log. Help, please
Log name: Application
Source: Application error
Date: 2010-01-03 02:04:50
Event ID: 1000
Task category: (100)
Level: error
Keywords: Classic
User: n/a
Computer: Monica-PC
Description:
Application Installer.exe, version 0.0.0.0, time stamp 0x4b208462, Installer.exe module, version 0.0.0.0, time stamp 0x4b208462, exception code 0 x 40000015, offset error 0x0002efec, 0xadc process id, failed failed application start 0x01cab8b5797299e1.
The event XML:
1000 2 100 0 x 80000000000000 309 Application Monica-PC Installer.exe
0.0.0.0
4b 208462
Installer.exe
0.0.0.0
4b 208462
40000015
0002efec
ADC
01cab8b5797299e1
Hi Tonio saini,.
Navigate to the location of the programs .exe file and right click on the .exe file, and then select run as administrator to install the modem.
You can also check the following link, try the suggestions and check if that helps:
http://social.answers.Microsoft.com/forums/en/w7hardware/thread/4ce21286-3a77-4A06-923c-889d657f8e33
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
How to install a driver for f4500? Error dot4_plugin.exe has stopped working
I had this printer HP Desk Jet F4500 connected to my computer laptop operating system windows 7 64 bit for months now, the printer has no drivers and I can't get them. I went on HP website and downloaded the base and the recommended full downloads and still the same error Stops the installation. dot4_plugin.exe has stopped working the extent of attributes are inconsisitent.
Help I am more than two hours in this and don't know where yet.
I did some additional research on this issue, more specifically the error 'extended attributes are inconsisitent' and found that this seems to be a Windows problem. Here are a few things you can try to solve the problem:
Method 1: Perform a scan of the file system (CFS) checker on your computer
Steps to use the SFC/SCANNOW command:
1. click on start-> click on all programs-> click Accessories-> right click on command prompt-> Select run administrator-> click on continue
2. at the command prompt-> Type "sfc/scannow"-> press enter
3. follow on-screen messages to start the analysis of the system (this process can take a long time)
The following will happen:
Start of the phase of verification of the scanning system of-> % of full audit.
4. once the analysis is complete, you will see a message with one of the following:
a. not found any breach of integrity
b. find corruption but repaired
c. corruption that he couldn't fixMethod 2: System Restore will take your PC to a previous state when the PC worked.
To restore the operating system to an earlier point in time, follow these steps:
1. Click Start-> Type "System Restore" in the box start search-> click System Restore listed programs.
Type your password-> click continue (if you have one)
2. in the dialog box the system restore-> click on a different restore point-> click Next.
3. in the list of restore points-> click a restore point created before you started having problems-> click Next-> click Finish. -
Reference Dell 946 AIO windows 7 64 bit, after installing AIOC.exe has stopped working
I was extremely upset with this problem and it seems that there are tons of discussions but none of the solutions work for me.
I have a Dell AIO 946.
Windows 7 64-BIT fully updated
I installed win 7 64 driver (5 or 6 times now)
Prints perfectly fine, when I want to Dells Aioc.exe I get the AIOC has stopped working.
I tried the new installation after using the same thing Cleanup utility.
usb ports modified, usb ports set to not go to sleep to save power
The player is R145441 on dell site.
Here is the log for when the error Stops Working:
Signature of the problem:
Problem event name: APPCRASH
Application name: dlciaiox.exe
Application version: 3.57.0.10
Application timestamp: 4549c5c0
Fault Module name: ntdll.dll
Fault Module Version: 6.1.7601.17725
Timestamp of Module error: 4ec49b8f
Exception code: c0000005
Exception offset: 0002e41b
OS version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional information 1: 0a9e
More information 2: 0a9e372d3b4ad19135b953a78882e789
Additional information 3: 0a9e
Additional information 4: 0a9e372d3b4ad19135b953a78882e789I want to scan to PDF and cannot do with this defect of AIOC program!
I never had so many problems with my HP they did it is super simple! Help, please!
Yes, all updates are performed.
Here's what fixed it in case someone needs to know
Right click on my computer
Go to the properties
on the left side, click on advanced system settings
Under performance, click settings
On the Data Execution Prevention tab
Select turn on DEP for all programs and services except those I select
Then add
Then navigate to the folder c:\program Dell AIO printer 946\ printer Dell
Add all of the files that are displayed
There was some prob 8 of them... then it worked perfectly.
-
Unable to play NFS MW as a file speed.exe has stopped working.
Original title: the program compatibility
Hello
Here, I installed a program called NFS MW but when I used to open this program it shows "speed.exe has stopped working".
Hi Slim,
There could be a chance that there is a file system corruption. So, I suggest you to run SFC scan and check if it helps you to repair the file system corruption, if there.
The file system check is a utility built into the operating system that will check for the corruption of system files. The sfc/scannow command. (System File Check) analyzes the integrity of all protected operating system files and replaces incorrect versions, damaged, altered, or damaged with correct versions where possible.
How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows 8.
1. press the Windows key and X at the same time.
2. choose (Admin) command line in the shortcut menu.
3. in the command prompt, type sfc/scannow and press ENTER.
4. exit the command prompt.
For more information, refer to this link:
Use the System File Checker tool to repair missing or corrupted system files
http://support.Microsoft.com/kb/929833/en-us
Keep us.
Kind regards
-
Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen. can someone help us?
Hi Andy,.
I checked the reported compatibility list, and the game is listed as compatible. Work in 64-bit or 32-bit Windows 7? I will try to reinstall the game, if you did an upgrade from Vista to Windows 7 recently. If it is a new installation and does not, please visit the EA's Web site to get the latest patch for the game to see if that helps address your problem. Let me know if you've done all that and you still have questions, and we can try something else.
Kevin
-
original title: r installshield Setup Launcher has stopped working.
Have all the answers to this question, he just happen to me.
Dear Debbi,
Thought you might like to know I finally solved my computer problems. The saga begins, rank Techbubbi we spent seven hours trying to solve the problems without result.
Looking through my papers of computer I found that I had purchased an extended warranty with Hewlett-Packard on my computer, rang them told them I had used Techbubbi, they began to look at my system and try things varius does ot fix the problem. It was decided that a full erase of the hard drive has been the only answer and restore the computer to its factory settings. I had done a backup a few days before. After the reset, I'm on the Epson/Vista webb page and downloaded Easy Photo printing more Creativity Suite I found that I also need to download the print Module easy all these are on the software page of Epson creativity. The new version is slightly different to the former, but I have finally it come back and have got rid of the Installshield R Setup and Setup.Exe problems. I hope this helps others out there with the same flaws. Thanks again for your help. Colin
-
I tried to install this program, run it and it indicates automatically adobe lightroom has stopped working and I have to close the program. I tried to uninstall and reinstall the program and the same error occurs.
Thus, it seems that the graphics cards drivers must be updated.
I suggest you to visit the site of graphics card manufacturer and update the drivers for the graphics card.
-
The error occurs when I insert the game black & white 2 or command and conquer the first decade and click install on a automotive screens popping up, I am sure that these two errors are almost identical and sure if one is fixed so will the other be.
The error that says "Setup.exe has encountered a problem and needs to close. We are sorry for the inconvenience. »
To try to fix it already I found a page here which tells me how to install drivers different installshield, and I installed everything that have been listed. My operating system is Windows Xp home edition
Hello
Were you able to install these games without any problem before?Step 1: Install all updates of windows on your computer and check the number.
Reference: http://support.microsoft.com/kb/306525
Step 2: Copy the game on your computer, then check the issue.Step 3: Perform the clean boot your computer.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135Note: To restore your computer to a Normal startup mode, follow these steps:
1. click on start in the box start the search.
2. type msconfig and press ENTER.If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
4. When prompted, click on restart.Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
Maybe you are looking for
-
HP Touchsmart PC Envy 15-j178ca laptop
I want to run Train Simulator on the computer from 8.1 to win, but it will not install (old program). I have partitioned the hard drive and now want to install Windows 7 Professional on it from a 128 GB flash drive. I copied the cd in the drive, but
-
Windows 8 on Windows 7 drivers
I want to downgrade by Hp Envy DV6-7211TX of Windows 8 for Windows 7. But the HP driver support page does not list the specific drivers of windows 7. Is it possible to use the Windows 8 drivers and install it on Windows 7
-
Hello I want to defrag my computer so that it runs faster. I know how to do this, but whenever I go to the program he said: he can't defragment it because C:\$Mft file is corrupt, run Chkdsk utility \f. Well, I think I found the Chkdsk utility. I ru
-
Sansa Fuze is not recognized by my computer.
All of a sudden my computer does not recognize my Sansa Fuze. I tried automatic switching to other formats on the "rocket". What can I do else?
-
"The speed of the CPU 0 in group 0 is restricted by the system firmware."
Hello! My computer has recently been very slow. I tried to format and reinstall, but it did not help. When I checked the system event log, I saw this warning message repeatedly: Microsoft-Windows-Kernel-Processor-Power 37 Warning! The speed of proces