I try to install Microsoft Windows Phone Developer Tools on my PC under Windows XP.
An error message keeps coming up saying "Setup could not install the following component: Microsoft .NET Framework 4.» I tried manuely installation of this infrastructure and then retry the Windows Phone Developer Tools installation again, but it still gives me the same error message. What should I do?
Restart the computer after installing .net framework plus this software is not compatible with Windows XP
Tags: Windows
Similar Questions
-
When I try to install Microsoft Update (as opposed to using Windows Update), I get the error number: 0 x 80070002
Hello
Look in Control Panel - updates of Windows to see what is the KB and post it here. It can indeed not necessary it and
be able to make a right click on it and HIDE. Let us know what the update is so we can help advise.Also, if you don't need it you can try to download it here.
Microsoft Download Center - research on KBxxxxxx the number of update for anchor xxxxxx
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to the place where your put it - click on - RUN as ADMINISTRATOR
If you need to fix the error:
Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
http://support.Microsoft.com/kb/956698Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH
Fix Error 80070002 when using Windows Update in Vista
http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
http://support.Microsoft.com/kb/910336Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
http://support.Microsoft.com/kb/956698I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Get the below error when try to install Microsoft Visual C++ 2008 Redistributable Setup on my new laptop Windows 7. Have been trolling forums and sites of assistance for hours without success. Most info seems to relate to Vista or previous versions. The few posts that I found that are relevant to Windows 7 suggest UN/reinstall .NET framework... but no this framework is visible in Add/Remove programs or anywhere where I can find. Any thoughts? Just got a new laptop and I'm looking forward to really dive in... but not with this weird error pending.
Error full text:
Error 1935.An error occurred during the installation of assembly "Microsoft.VC90.ATL, version ="9.0.30729.1", publicKeyToken =" 1fc8b3b9a1e18e3b","
processorArchitecture = "amd64", type = "win32" '. See Help and Support for more information. HRESULT: 0X8007054F.Please see the thread below for a possible solution:
http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/6cb25b30-f2ab-4e86-81c4-5c9b4c891c7d
Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP
-
original title: pinball arcade problem
When you try to install Microsoft Pinball Arcade in Windows 7 Home, I try to run setup.exe and the message that is missing a dll. Help, please. Thank you.
This file is missing?
Since it is an old game, it is possible that it will simply not work.
Try to use the compatibility options to run the installation - the game is designed for Windows 98, but try different options and if that does not work:
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows -
every time I try to install something windows tells me I can't install it because I install another prgm, but don't want to install anything...
Hi MatthewMessmer,
- Did you the latest changes on the computer?
- You receive the error message when you try to install a program on the computer?
- You have security software installed on the computer?
Method 1
First restart the computer and try to install programs on the computer.
I suggest that you restart the Windows Installer service and check if it helps.
Refer to the article below and try the steps listed in the section Windows installation problems, check to see if it helps.
How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
http://support.Microsoft.com/kb/2438651
Method 2
If the previous step fails, then temporary disable the security software on the computer and check if that helps.
Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
-
Hi, the trial of 8.1 windows installed on my PC laptop HP 14-d003tx expired already so I installed a new windows 8.1 Pro 64 - bit OS. I went here: http://support.hp.com/us-en/drivers/selfservice/HP-14-Notebook-PC-series/6529958/model/6753958 to check the drivers to install but I was confused because I don't know who's who or what drivers I need to install in my laptop. For example, for drivers bluetooth and wlan, there are 2 choice, MediaTek (Ralink) 802.11 Wireless LAN (WLAN) adapter and Mediatek 802.11 Wireless LAN driver card, same thing for the bluetooth and other drivers. Can you please help me that driver is compatible or drivers that I need to install in my laptop? Or how will I know that I need to install drivers. Thank you!
Hello:
Please see my response to your other post on the link below...
-
"a need to rise"?
Try to install microsoft software titles and when run download or download registered site get the pop-up 'needs elevation' does that mean?Hello
Right-click on the setup.exe and run as administrator
-
Error Code D59. -When you try to install Microsoft SQL Server 2005 KB2463332
I get D59 error Code when you try to install Microsoft SQL Server 2005 KB2463332. Any suggestions?
Hello
Try to download and install manually and check:
For more information, see this:
http://support.Microsoft.com/kb/822798
It will be useful.
-
I try to install the windows easy transfer and I get the error.
I try to install the windows easy transfer and I get the error, "the version of windows you have installed does not match the update you are trying to install. I download and install the 32 and 64-bit version for XP. I also downloaded and tried both 32 and 64-bit version for windows 7.
On which version of Windows 7 you are trying to install Easy Transfer? Easy transfer seems to be automatically installed on Windows 7. You run Easy Transfer on Windows 7 to 'prepare' the copy, you need to be running on the 'old' PC.
-
Original title: pc restart continually saying met windows critical problem after installing microsoft security databases
Had problems with windows firewall and Defender does not. Removed protector virus blank media like this firewall did not work either. Tried the Fix 4 her. Still would not work. Then tried to install Microsoft Security Essentials. Rang scan and it restarted the pc and I am now in a loop that says "Windows has encountered a critical problem and will restart automaticlaly in one minute. Please save your work now. "Then, it closed its doors, restarts and the same message appears. A also say-connected on the internet also. Help please...
Hello
1. who were the fix - it, you've tried?
2. were you able to successfully install other programs on your computer before this problem?
3. What is the error you received when the Windows Firewall and defender did not work on your computer?
4. you have made no changes to the computer before this problem?
First of all, you must disable the auto reboot system error and then we can check if the problem exists in safe mode or not.
Method 1.
Step 1. Disable automatic reboot to avoid unwanted restarts on system failure.
a. when your computer starts up keep press F8 on your keyboard until you get the Advanced Boot Options screen.
b. now, use the arrow keys, select Disable automatic restart in case of system error and press ENTER.Step 2:
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Step 3:
If the computer works properly in safe mode, then you can perform a clean boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
NOTE: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.
Method 2:
You can try to uninstall completely, and then re - install Microsoft Security Essentials and check.
You can run the fix - it from the link next.
Solve problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
Method 3:
I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspxNote: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Note: All data that are infected must be cleaned only by deleting all of the data, which means that there is a risk of data loss.Post back with the results for you help more.
-
Microsoft applocale
I tried to install this microsoft applocale. But I can't install it successfully. It showed "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your supplier of staff or the package of support ".
What can I do to install microsoft applocale?
Thank you.
AppLocale can be installed on WIndows Server 2003 and Windows XP.
See "Important notes" on http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=13209
-
Running XP SP3 tries to install Microsoft.NET Framework 1.1 Service Pack 1 update it still not and I get the error 0x66A code. Could not find an explanation anywhere for this error code.
"enginemanses" wrote in message News: ec6aa35b-f44e-4514-8f56-25c025c76ebd...Running XP SP3 tries to install Microsoft.NET Framework 1.1 Service Pack 1 update it still not and I get the error 0x66A code. Could not find an explanation anywhere for this error code.
http://support.Microsoft.com/kb/923100 can help - even if the error code is different.
--Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers
-
Current operating system is Microsoft Windows XP Media Center Edition Version 2002 Service Pack 3
Office products 2013 32 bits are supported on the Windows OS at the following address:Windows Server 2008 R2
Windows 7 (32-bit or 64-bit)
Windows Server 2012
Windows 8 (32-bit or 64-bit)
Source: http://technet.microsoft.com/en-us/library/ee624351.aspxSystem requirements for Office 2013...
http://Office.Microsoft.com/en-us/support/system-requirements-for-Office-2013-and-Office-365-HA102785958.aspx -
Just installed Windows 7 Ultimate 64 - bit version. I have already installed all the updates without problem, but when I try to install one of the recommended update language packs my computer hangs during the update "facility" progress bar gets about 90% full. I never get an error screen, the computer just hangs, even the mouse becomes unresponsive. I waited for hours in the hope, it was just temporary, but I ended up having to reset the computer. He told me he could not update and restores the changes when it starts. This happens whenever I try to install a language pack.
Hello
I suggest that you follow the steps below and check if the problem persists.
Step 1:
a. click on Start
b. open the Control Panel from the menu display by (up/right) select one of the views of the icon .
c. click Troubleshooting. On the bottom of the screen, under system and security , select fix problems with the Windows Update troubleshooting tool . Follow the instructions.
You can also check the information in the following article.
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updatesStep 2:
If that does not solve the problem, start your computer in a clean boot State and install the update to KB972813 . There could be a software program of third party in conflict with the update. Clean boot helps eliminate conflicts of third party software.
Note: Follow step 7 to restart your computer after you install the update in a clean boot state as usual.
Let us know the results.
Aziz Nadeem - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Hello
Help, please! I automatically get the update above via Windows update, but every time I try to install it, it fails with the WindowsUpdate_00000D56 error code. I searched on through pages and pages or forums, but I do not understand the jargon. How can I get this update to install successfully?
Daniel
Hi Daniel,.
Could you please provide the full error message that you receive for a better understanding of the issue?
Step 1: Manually download the update from the link below and then try to install it
Save the update on the Office
Step 2: Disable security software, follow the steps mentioned below
Disable antivirus software
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Important: Activate security software once everything is done
Now try to install the update that is saved on the desktop
Let me know if it works or you need help
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
I have an iPhone 6 I dropped in the water more than a month. I really took the trouble with it since the 7 came out, so I used an old 5 while I waited for my 7. Now, 5 s wife is listening on and wanted a new iPhone. She is ok with me trying to fix my
-
Why my iphone is required to connect to itunes after updating wireless.
Why my iphone is required to connect to itunes after updating wireless? I don't have itunes and won't. Is there anyway around of this or take it back to the old ios?
-
HP Envy 15 t-j100: processor speed decreases when you play?
Hi, I use a laptop HP Envy 15 t-j100, and I noticed that whenever I play games, my CPU speed drastically decreases of 3.3 gHz to 1.8 gHz. Can someone explain to me if this is normal or if there is any way to solve this problem? My cell phone is alway
-
Disable the menu item in the third party application (such as Photoshop)
Please suggest me to disable the menu item in the third party application (such as Photoshop).
-
Both have the latest upgrades of the operating system. Both are running the same version of MacAfee. He used to work without problems up to several weeks, there may be a problem of automatic update but I don't know. Disabled the two walls of fire, no