I try to run the security essentials and it tells me that I'm missing msvcp90.dll

Similar Questions

• Downloaded the file 1 and 2 to reinstall CS5.5 - two files are now in the same folder, but when I try to run the .exe file, it always tells me that ' the party archive file from Adobe CS5.5 Design Standard is missing. You need all parts in the same folder

  I tried moving them to a new folder by themselves, but that did not work or the other. Help would be so appreciated!

  Hi Barbaram37759064,

  Please read the "Instructions of Installation for perpetual products" in the following document: How to download, install and activate Adobe applications

  • Veuileez check also if the size of the file downloaded and shown on the Web site of file size is the same.
  • Disable any software & browser protection security tools installed on your machine with the firewall system.

  Click here to Download Adobe Creative Suite 5.5 products

  Let us know if that helps.

• TypeError: try to run the script compilation and go on a 'mistake' in scope cleared when message returns the transfer through images for each image. Does not affect viewing.

  TypeError: try to run the script compilation and go on a contour

  Above the error message appears when moving between images - back and forth. By clicking on the OK button removes the error message and there is no apparent problem. The window that appears refers to a JAVA Script Application (I guess that FIREFOX is the application?)

  -> Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems

  Check and tell if its working.

• I want to download Live Essentials and it tells me that I need to install KB971644, however I can't find it on my list of available updates

  Hi, I had to re - install after Norton 360 caused several mistakes, I'm under Vista & service Pack2, I want to download Live Essentials and it tells me that I must install KB971644, however I can't find it on my list of available updates

  I solved this problem,

  I installed Microsoft Office and Lo & here KB971644 will now appear in the automatic update,
  Thanks for our help
  Concerning

• I AM RUNNING WINDOWS SECURITY ESSENTIALS AND I SAW THAT IT IS NOT NECESSARY FOR MY RUN DEFENDER. THE PROBLEM IS TRYING TO FIND OUT WHAT PROGRAMS ARE CURRENTLY UNDERWAY.

  DEFENDER OF DOSEN'T WORK. WITH THE HELP OF SECURITY ESSENTIALS. MAY NOT KNOW WHAT PROGRAMS ARE UNDERWAY.

  Hello

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• You try to run the scan mode and mode interface fpga at the same time is causing errors

  I'm reading a 9236 9237 and a 9215 with the scanning engine and read from two 9211 modules with the fpga. It's because I need to acquire to 200 Hz with the 9236 9237 9215 but maximum rate of the scan engine is limited by the slower module in the system, which in this case is the max of 15 hz the 9211.

  So to use both interfaces (scan engine and fpga), I followed the percisely given in this article for instructions.

  1. the project has created and added the peripheral crio using the interface of the scan engine.

  2. Add the target fpga and drag and drop the 9211 inside modules

  3. has created the fpga in interface file with and compiled with no error.

  4. interfaced with the file fpga at almost exactly the way the sample project of "getting started with 9211' by using the engine of analysis in the interface with the other modules.

  5. after the errors to discover that I created a VI that tests for just the portion 9211 code (called "thermocouple FPGA method Test.vi")

  The data returned by the interface fpga was nothing else than zeros on all channels, even if thermocouples were hooked on some of them. (all zeros as entries in the convert temperature vi gives-410, 6160 degrees F, if you happen to have the material to try this.)

  I get the following error from the open fpga vi reference:

  code error-61141
  "Thermocouple method Test.vi FPGA.
  Activities FPGA:
  
  Open FPGA interface reference.
  Reserved outside LabVIEW FPGA:  turns The RIO Scan Interface.  You must set the mode Interface FPGA chassis in order to unlock the FPGA. »
  

  It's extremely frustrating, because as I explained, I've been very attentive not only follow the instructions for concurrent fpga and analysis but also to model my VI by the example of VI, even if only for the moment, just to try to work things out.

  Any help would be appreciated as I need to fix this for the further development and I am somehow in a lack of time. I opened a support ticket (reference #7256226), but the app engineer had no time to answer.

  My system:

  cRIO-9014 controller RT with crio-9104 bottom of basket.

  LabVIEW 2009

  Latest drivers and peripheral software pc and rio (RIO scan 3.2 engine support june2009)

  rex1030 wrote:

  I'm reading a 9236 9237 and a 9215 with the scanning engine and read from two 9211 modules with the fpga. It's because I need to acquire to 200 Hz with the 9236 9237 9215 but maximum rate of the scan engine is limited by the slower module in the system, which in this case is the max of 15 hz the 9211.

  This should not be the case.  9211 data will not update with each sweep, but you should be able to run the scan faster than 15 Hz without problem.  Do you have specific issues with this?

  So to use both interfaces (scan engine and fpga), I followed the percisely given in this article for instructions.

  1. the project has created and added the peripheral crio using the interface of the scan engine.

  2. Add the target fpga and drag and drop the 9211 inside modules

  3. has created the fpga in interface file with and compiled with no error.

  4. interfaced with the file fpga at almost exactly the way the sample project of "getting started with 9211' by using the engine of analysis in the interface with the other modules.

  5. after the errors to discover that I created a VI that tests for just the portion 9211 code (called "thermocouple FPGA method Test.vi")

  You can try making sure that the chassis is set to mode Interface FPGA and the setting is deployed.  I wrote that article that you referenced says will select the deploy option later and not explicitly speak to deploy the chassis later.  Run a VI with a reference open FPGA vi not automatically deploy chassis settings if you need to do it explicitly.  Try the following steps.

  1. right click on the frame element and select Properties.  Make sure that the Interface FPGA option button is selected. \

  2. right click on the frame element and select deploy.

  3. repeat your VI.

  The data returned by the interface fpga was nothing else than zeros on all channels, even if thermocouples were hooked on some of them. (all zeros as entries in the convert temperature vi gives-410, 6160 degrees F, if you happen to have the material to try this.)

  I get the following error from the open fpga vi reference:

  code error-61141

  
  "Thermocouple method Test.vi FPGA.
  Activities FPGA:

  Open FPGA interface reference.
  Reserved for LabVIEW FPGA outside: The RIO Scan Interface is running. You must set the mode Interface FPGA chassis in order to unlock the FPGA. »

  The likely cause of this error is that the setting of the FPGA Interface on the chassis has not been deployed.  If the chassis is still Mode Scan fixed personality bitfile will be loaded on startup and the FPGA will be locked.

  It's extremely frustrating, because as I explained, I've been very attentive not only follow the instructions for concurrent fpga and analysis but also to model my VI by the example of VI, even if only for the moment, just to try to work things out.

  I'm sorry that you have had difficulties.  Assuming that I'm wrong about the source of your problem, it seems we have to update less than Ko to include the deployment step.

  Any help would be appreciated as I need to fix this for the further development and I am somehow in a lack of time. I opened a support ticket (reference #7256226), but the app engineer had no time to answer.

  My system:

  cRIO-9014 controller RT with crio-9104 bottom of basket.

  LabVIEW 2009

  Latest drivers and peripheral software pc and rio (RIO scan 3.2 engine support june2009)

• You try to run the system restore and get this error__unexpected error filename directory or volume label syntax incorrect (0x8007007B) __What can do?

  Try to run system restore and get this error
  error unexpected filename directory or volume label syntax incorrect (0x8007007B)
  What can I do?

  Hi Larry Bogie.

  1. you receive error message when creating point system or performing system restore?

  2. did you of recent changes on the computer?

  Usually, this would happen if there is any place in doubles in the system restore properties.

  To set the path of the appropriate Windows Vista restore point as follows:

  (a) click on the Start Menu.

  (b) type sysdm.cpl in the start search box and press .
  The user account control window will prompt you for permission to run the program.

  (c) click continue.
  The System Properties window appears.

  (d) click the System Protection tab.

  (e) to the automatic restore points, uncheck the any location invalid or duplicate

  (f) click to check drive C: with the Windows Logo.

  (g) click on apply, and then click Ok.

  (h) restart the computer and check if it works.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message in another language when you try to run the perfect world and Forsaken World

  Hello everyone I have a problem that I've been up to this unable to solve, and I hope someone here can...
  in the last month or more I tried to run the following games perfect world and abandoned managed both by entertainment world perfect but continue to receive the error message, http://i187.photobucket.com/albums/x7/steven2601/fw.jpg

  and seems to be able to resolve the question pls help

  the game is the English version, but apparently it was based on the Chinese version, when they converted or something I don't know about this in any case I installed all the Japanese and Korean language Chinese packs and the message is always out the same... However, I took a radical and simply implemented measure to upgrade to windows 7 now here's the funny thing I didn't redownload the game then I copied the installed folder of vista on my new installation of windows 7 and he ran right away I would have thought with it being installed on 1 OS, then copied to another , one that would give an error message... anyway problem solved but thnx for answer and enjoy my little story :)

• I try to run real player and it tells me that I'm missing msvcp0.dll___i have win xp home edition__

  I can reinstall it on my computer so I need to find the file msvcp90.dll

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCP90-DLL-not-found-missing-error.htm

• I installed Security Essentials and it causes Defender to stop the run.

  * Original title: Security Essentials

  I installed Security Essentials and it causes Defender to stop the run. The only way I can turn the Defender needs to restore my computer to before Security Essentials. I tried twice and got the same result.

  Security Essentials replaces the Defender?

  I am running Vista.

  Thanks Len H

  You are right.  MSE (Microsoft Security Essentials) in Windows XP, Vista and 7 can be used instead of Windows Defender.  They can not be activated at the same time.

  https://blogs.Microsoft.com/Cybertrust/2013/11/14/Windows-Defender-and-Microsoft-security-essentials-which-one-do-i-need/

• I Virus: Win32 / Alureon.H I run full scans of the malicious software removal tool, Microsoft security essentials, and care.

  It is the only virus I have it please help I am so close to fixing my computer I managed comprehensive analyses on all programs that they detect this virus but I always eventually have and redirected to Web sites randomly please tell me if possible how do I manually remove this

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• You can run Microsoft Security Essentials along the coast with Verizon internet suite? Or will they be in conflict?

  You can run Microsoft Security Essentials along the coast with Verizon internet suite? Or will they come into conflict.

  Hello

  You should be able to use the free version of Prevx with Verizon and Firefox.
  You may need to stop the function of safe online but you can try it. If it is
  are problems collate Prevx, Verizon and the Support of FireFox.

  Verizon Internet Security is just McAfee re-packaged.

• If running Microsoft Security Essentials do I need run Windows Defender? Is the reason why I can't start the Defender-Essentials?

  I use Microsoft Security Essentials on Vista x 32.  Security Center tells me to start Windows Defender.  I click to start, but he tells me that I have to restart my computer or manually start Defender myself.  I go to services, and it does not advocate.  It basically tells me that my system has no need currently the program or there is another reason, it does not start.  Responses tells me that for the error code of course, I met error 0x800106ba later Code it tells me to try to start it manually if it doesn't work I have uninstall Defender and need to reinstall it.  Yet when I go to uninstall programs, Defender is not listed.  I tried to install it again because it is not listed, I thought I could.  When I went to install it, it-error telling me that I have already as it came pre-installed with Vista.

  Now, my question.  Do I really need Defender since I use Microsoft Security Essentials?  Is in fact an older version almost essential?  Why it tells me to start it if it is not needed? And if necessary, why it won't start

  Hello

  Be sure to check in the MSE Forums.

  Answers - MSE Forums
  http://answers.Microsoft.com/en-us/protect/default.aspx

  ------------------------------------------

  Windows Defender features are included in MSE, defender of loading would be redundant.

  Windows Defender antispyware =

  MSE is antivirus + antispyware.

  Then think about MSE as Windows Defender with more added (which is).

  Check this box:

  Start - type in search-> find MSCONFIG in top - click right on - RUN AS ADMIN

  Startup tab - disable Windows Defender (if the list) and APPLY / OK - REBOOT

  This should stop loading Defender.

  ==========================================================

  If necessary after the foregoing:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Check the default services and dependencies to ensure that they are running.
  http://www.blackviper.com/WinVista/services/Security_Center.htm

  ============================================

  Security Center incorrectly reports, or try Windows Defender
  Start incorrectly, or both.

  Security Center not related anti-virus or firewall State correctlyhttp://www.winhelponline.com/blog/security-center-not-reporting-anti-virus-or-firewall-status-correctly/

  How to fix Vista Reporting incorrect information Security Center
  http://www.Vistax64.com/tutorials/195736-Security-Center-not-reporting-correct-information.html

  How to disable or enable the Security Center in Vista
  http://www.Vistax64.com/tutorials/67737-Security-Center.html

  This thread might help as it might be a permissions problem.
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3d2049ae-4581-439b-8E15-3f603f5c60f0/

  =====================================

  Troubleshooting of Windows Defender
  http://support.Microsoft.com/kb/555957

  "%ProgramFiles%\Windows Defender\MsAsCui.exe" is the folder of the default Defender

  Start - type in the search box-> Windows Defender - find top - make a right click on it.
  RUN AS ADMIN

  If no joy using Start - computer or Windows Explorer to access this folder and create a
  Shortcut to put on the desktop and the Start Menu. You can also right click on a shortcut this and
  see if they point to here.

  Goal
  "%ProgramFiles%\Windows Defender\MsAsCui.exe".

  Start in
  "%ProgramFiles%\Windows defender.

  How to enable or disable the Windows Defender
  http://www.Vistax64.com/tutorials/93118-Windows-Defender-off.html

  --------------------------------------

  Maybe something here if necessary:

  What is display / causing the error message? Some anitvirus/security/antispyware products can
  cause this error. On those who use you, including those that your never had even those
  uninstalled (the remnants can cause problems). McAfee is just an example of what many can do.

  Start - type in the search box - Services - find top - Right Click - Run as Admin

  Windows Defender - value STARTED and AUTOMATIC

  or set MANUAL and STOPPED if necessary

  Fix for the problem of 800106ba.
  http://support.Microsoft.com/kb/931849

  Error (an example) of McAfee report.
  http://service.McAfee.com/faqdocument.aspx?ID=TS100610&lang=en_US&prior_tid=2&AnswerID=16777216&Turl==http://KB.McAfee.com/InfoCenter/index?page%3Dcontent%26id%3DTS100610%26actp%3Dsearch

  Check also:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/574fb871-034C-4B42-B800-328af16a9177

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• When I run Microsoft Fix it, it says I have no firewall; so I see Security Essentials and everything is GREEN. Why is this?

  When I run Microsoft Fix it, it says I have no firewall; so I see Security Essentials and everything is GREEN. Why is this?

  * original title - I have Microsoft Security Essentials? *

  Good news is THAT MSE is showing protection is enabled and given that you do not receive notification of Security Center advising the firewall is not enabled it can be assumed that it is enabled. Bad news is that I don't have an answer. You have any other real time protection(Avast, AVG, etc.) currently installed? What, if any, previous protection in real time of programs have been installed and they did include a firewall? You made using tools and methods to remove properly uninstall completely?

  Since it is a problem Microsoft Fix it I suggest you consider posting your question in the fix it Center Forum.

  Microsoft Fix it Center Forum
  http://social.Microsoft.com/forums/en-us/fixitcenter/threads

  You can also consider opening a Support box.

  Support-contact us
  http://support.Microsoft.com/contactus#TAB0

  Attach to e-mail
  E-mail address is removed from the privacy *.

  I hope this helps.

• After I downloaded beta Security Essentials, my computer say suddenly that he was not a genuine copy of Windows running and locked up.

  original title: the customer service is horrible

  After I downloaded beta Security Essentials, my computer say suddenly that he was not a genuine copy of Windows running and locked up.

  I called last night and got a foreign person has attempted to resolve the issues and could not, so he told me that I had to call back after 06:00 to speak to someone in the United States.
  So I called back today at 06:00 and got one of those who are running around things voice control that didn't fix my problem at all. After much effort, I got a live person. Again, it was a foreign person (why make me wait all night and get up early to call?!?!)
  This woman told me to restart. I told her that I had rebooted about 10 times since the day before and each time he took forever to load back up the box that tells me that I need to activate windows. She has reiterated, "I ask you to restart." I knew he wouldn't do ANYTHING, but I did and after the session it forever (as I told him it would be) she told me that I had to remind once I got up the box again. I called after that I got the box AND HAD TO START OVER again ONCE with someone new. Of course, she was trying to pass me to someone else.
  Of course, after all this trouble, no MS sells a product key for Vista, it is abandoned. So I need to go buy Windows 7 and she told me that I'll LOSE EVERYTHING when I install it - all my documents and family photos are gone forever. Why not take my money and sell me a product key instead of let me in trouble?
  The worst ever undertaken. Of course, MS doesn't care because they have a monopoly.

  You should not need to buy anything except the recovery disc for your machine (if the built-in recovery partition does not work), unless you really need Win 7 for some reason any.

  That being said - the COA sticker on your machine is readable? If Yes, then you should have no problem with a Windows 7 upgrade version - but you will need to either use activation by phone, or installation methods described here...

  http://www.winsupersite.com/article/Windows-7/clean-install-Windows-7-with-upgrade-media