I uninstalled MSE and installed norton, now I can't access the web. any help? Vista Home premium

Similar Questions

• Apple support has been unable to solve my problem with iTunes not responding do not. He started all of a sudden. A few weeks after I've upgraded to Windows 10. Reinstalles/uninstalled iTunes and nothing. Now, I can't even Apple support for help.

  All the sudden, iTunes has stopped responding. I click top and nothing. I spent over an hour with a Senior Engineer at Apple's Support, which does not give me a ticket number so now Apple can't even find the person I talked to. This person had to remember and it's been 2 weeks. I called Apple back Support and since they can't find a ticket number they told me that I have to wait until this person reminds me. This engineer had me remove and reinstall iTunes with all the other components that go with it, I run it as administrator, pretty much did all the troubleshooting I had done on my own. I have now to sit and wait, hoping that this senior engineer at Apple called me back. It's poor and poor support for iTunes. If anyone has any advice, please share.

  Thank you

  These can be things that you've already tried. Despite this, it might be interesting to try again. As another poster has said recently, though for another problem, "20th try was the charm.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Upgrading to 4 Fusion and now I can't access the web server on my Mac host

  I am running OS x 10.6.8 and I'm hosting a virtual machine running windows XP, using NAT Networking. I have a web server running on the mac I need to access from the hosted virtual machine. I used to be able to just use the IP address of the gateway in the virtual machine for the web server, but it doesn't seem to work. If I set the external IP address of the mac it seems to work, but I don't have a static IP address, so it is a pain to update every hour.
  
  Any help would be appreciated!
  
  Thank you

  Although in some cases, the IP address of the gateway works, nevertheless IMO that is a misuse and should use the address IP of VMware NAT Virtual Ethernet adapter IP address the host not IP address of gateway.

  If in a Terminal, run the following command:

  ifconfig | grep -A 3 vmnet8
  

  Then use the address after "inet" IP said at the exit.

  Example on my system:

  Last login: Mon Jan 16 12:43:00 on ttys000
  Computer:~ WKZ$ ifconfig | grep -A 3 vmnet8
  vmnet8: flags=8863 mtu 1500
      ether 00:50:56:c0:00:08
      inet 172.16.198.1 netmask 0xffffff00 broadcast 172.16.198.255
  Computer:~ WKZ$
  

  So I use 172.16.198.1 of the prompt or use the host name of the Mac (without the .local) after the addition of 172.16.198.1 and the hostname of the Mac to the guest hosts file.

  Post edited by: WoodyZ - posted: January 16, 2012 12:52

• I had to do a factory reset on my W7 64 bit PC and reload my software. Now I can't access the CR2 files. Help!

  I had to do a factory reset on my W7 64 bit PC and reload my software. Now I can't access the CR2 files. Help!

  These are the files that I have consulted before the reset and come from my Canon 550 d.

  Do I need another plugin?

  I think the key is that the updates failed.

  I suggest try to update manually via the packets 'Camera Raw 6.7 Update' and 'Adobe Photoshop 12.0.4 updated for Adobe Photoshop CS5' found here: Adobe - Photoshop: for Windows

  -Christmas

• If I have windows vista Home Premium 32 bit genuien instalation in my laptop after how I can to update or upgrade in Windows Vista Home Premium 64-bit

  If I have windows vista Home Premium 32 bit genuien instalation in my laptop after how I can to update or upgrade in Windows Vista Home Premium 64-bit

  If I install windows vista Home premium genuine in my laptop after how I can to update or update 64-bit of Windows Vista Home premium 32 bit

  If I install windows vista Home premium genuine in my laptop after how I can to update or update 64-bit of Windows Vista Home premium 32 bit

  Hello

  You are unable to update or upgrade Vista 32 bit to 64 bit of Vista.

  32-bit to 64-bit, or 64 bit to 32 bit is done by a new installation using a full version of the operating system.

  32-bit and 64-bit are different operating systems.

  See you soon.

• Can I use the product key to my Home Premium pre installed windows 7 64-bit OS that are in my label of windows laptop back?

  I downloaded the iso file of windows 7 Home premium 64-bit. can I use the product key to my Home Premium pre installed windows 7 64-bit OS that are in my label of windows laptop back...

  Original title: the Windows 7 product key

  Yes you can. To learn more:

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

  If your computer is pre-installed with Windows 7 Home Premium, you should have a recovery if partition:

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

  ------------------------

  If the recovery partition is damaged or does not, you can then use the downloaded Home Premium as an alternative.

• Reinstalled XP, but now I can't access the internet

  Hello

  I recently reinstalled Win XP on the same computer on which this copy has been installed.  The computer will have access to our home WiFi network, although he does not always see other computers on the network.  Worse, is that when I run IE6 Service Pak 2 (the version that is installed on the original disc), I can pull up the MSM homepage which will remain for about 15 seconds, then I get an error that IE has to close.  I think it boils down to "I can't access the Internet."  Tried everything that I can think and followed a number of suggestions on this forum.  I've seen comments that I need the update to Windows Service Pak 3 here, but, of course, I can't that without access to the internet.

  Any ideas?  Thank you, Susan

  A few thoughts...
  -from another computer...
  -Make sure you get all the drivers for your computer from the manufacturers Web site
  -Download a form any anti-virus (MSE for example)
  -Download SP3 from here: http://www.microsoft.com/en-us/download/details.aspx?id=24

  Once you have done this, I hope you can get on the Internet. Once there, get all your updates.

  I hope this helps.

• Windows XP sp3 can not access the network shares on vista after installing sp2

  I have a xp sp3 computer and another currently running vista Home premium sp2. Previously, I was able to access the network share on the xp computer before vista computer I installed sp1. Both computers were able to ping between them without problem.

  I've upgraded to sp2 because I had problems with windows media center, missing records. Upgrade of these issues fixed, but this means that roll back to sp1 is not an option for me to get operational network.

  Please do not post a standard answer on the network configuration. I am familiar with the standards requirements to share files between xp and vista and everything is set up correctly.  Like I said everything was working fine before the installation of sp2.

  If it is a known problem that is still not resolved, I'd appreciate knowing that information as well.

  Edit: Firewall been disabled during my troubleshooting

  After more work, I was able to solve my problem.  Update zone alarm solved my problem and helped my windows xp machine to access my Vista network shares.  As I pointed out in the original post, zone alarm firewall has been disabled during my troubleshooting.  Apparently, when disabled, the old version of zone alarm has always been the origin of the problem.

• Change sharing permissions, now I can't access the local disk

  Hello all, I have two computers, both running windows 7 (one is 64-bit and the other is 32-bit) connected via LAN and WiFi. One of them has all of the local disk shared with full compensation for everyone (full control). I decided to remove these permissions and control to "deny". Then I had to cancel the task and decided to resume later. HURT, now I've lost access to this drive, even though I can access some files. When I try to enter in the drive, an error message appears saying "C: is not accessible. Access is denied. I did some research and it seems to be a common problem, but I followed all the steps did not work. It shows as 0 bytes and security options does not show anything, but "you don't have permission to view or change the permissions of the object settings. I tried to adapt, even in safe mode and as administrator, do not to prevail. It keeps saying 'access denied' I also tried to set a hidden administrator account, but the account manager is 'not available for my system' when I made these unfortunate changes, it was not this computer but on the other, I think it might be the reason. Now, I can not access my local disk or change anything. Please, help me, I can't find a solution to this mess!
  Thank you

  Hello

  I suggest you to follow the steps in the link given below and check if it helps.

  How to open a file if I get an access denied message?

  http://Windows.Microsoft.com/en-CA/Windows7/how-do-i-open-a-file-if-i-get-an-access-denied-message

  Let us know the status of the issue.

• Can someone help me with printing. My settings have been changed. I have a printer Epson Stylus and pse 13. I can't access the configuration screens that they show that I need to access.

  I can't access the configuration screens that they show that I need to access.

  What is a forum. I don't understand. I'm 63 and they will not access my computer at ADobe

  I can't access the configuration screens that they show that I need to access.

  What do you need access? When you encounter a problem?

  What is a forum. I don't understand.

  A forum is a place which provides for exchanges between users.

• Windows install the latest updates on my phone and now I can't access the internet

  Windows Installer automatically of updates on my computer and now even if the system connects to the wireless network and I have only local access he has no internet access.  I tried both with the wired and wireless options and nor will not work.  Everything worked fine until the update system - do not know if I have to do a system restore to when he installed updates (I tried to restore to a point a few days before the download, but it failed) or if I should try to uninstall updates.  While I am not very confident with the work on the computer would like some advice on the best way to go.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• I had to put my laptop to the original on the parameters of the box and now I can not get all updates for windows vista home preimum

  I have reset my Toshiba laptop for the orginial on the parameters of the box using my recovery disk that came with the laptop when I bought it years ago. Now reinstall and update of windows, I can not service pack 1. He said that the system may reboot several times, blah blah blah, it is said installed. I just want this computer up-to-date with all the updates. Its use will be mainly internet, e-mails and word documents. Help, please

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Diagnose and automatically fix common problems with Windows Update
  http://support.Microsoft.com/mats/windows_update/

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

• I installed a new router. Now, one of the PC will not allow the rest of the pc s are there to connect. He is able to connect to each computer on the network. I can't find the question, any help?

  I have checked the computer name, sharing, turned off the firewall.  Still can't find the question.

  I've corrected in fact accidentally the problem today.  I uninstalled a Malware program and tada!, the other pc on the network were immediately able to access the XP pc.  The 'good' pc was always able to access internet, router, network between them.  The only problem we had was the 'bad' pc was able to connect at all, but the 'good' pc were unable to connect to the computer of 'bad '.

• After you have installed the free updates for Vista Home Premium 64 bit, Windows will not start

  After that I installed the free updates to service pack 1, the system goes through 2 of the 3 steps, while it recharges, then the system does not boot?  To get the computer to work again, I need to run the repairer of Windows, which allows you to restore the system to an earlier point?  Does anyone have an idea how to fix this?

  Do your system restore, then:

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• err3 Err1 on startup. system will not f8 or f11 and says no operating system found? What the? A windows vista family premium, a second ago...?

  I hope someone can help.  I can't fly on the f11 or f8 function keys. I have tried bios updated default did not work.  Says Bios and video are shawdowed.  No TPM or TPM has problem.  Fixed Disk0 and fixed Disk1 - F.2a Phoenix BIOS 4.0 Release 6.1 version.  So can't do the system restore? Where is my operating system?  I lost everything in C and D drives?  System will not start or start at all.  Do I have to re - install the OS Windows Wista?  Work about to go back and fix?

  Hello SteveO_1968,

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:

  1. Put the Windows Vista installation disc in the disc drive, and then start the computer.
  2. Press a key when you are prompted.
  3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  4. Click repair your computer.
  5. Click the operating system you want to repair, and then click Next.
  6. In the System Recovery Options dialog box, click command prompt.
  7. Type Bootrec.exe, and then press ENTER.

  Note To start the computer from the Windows Vista DVD, the computer must be configured to start from the DVD drive. For more information on the configuration of the computer to start from the DVD drive, see the documentation provided with your computer or contact the computer manufacturer.

  Bootrec.exe options

  The Bootrec.exe tool supports the following options. Use the option that suits your situation.

  Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

  • bcdedit/export C:\BCD_Backup
  • c:
  • Boot CD
  • BCD attrib s h - r
  • Ren c:\boot\bcd BCD.old
  • Bootrec /RebuildBcd

  / FixMbr

  The /FixMbr option writes a MBR compatible Windows Vista on the system partition. This option does not overwrite the existing partition table. Use this option when you need to solve problems of corruption of MBR, or when you need to remove the non-standard code from the MBR.

  / FixBoot

  The /FixBoot option writes a new boot sector on the system partition by using a boot sector that is compatible with Windows Vista. Use this option if one of the following conditions is met:

  • The boot sector has been replaced by a non-standard Windows Vista boot sector.
  • The boot sector is damaged.
  • An earlier Windows operating system has been installed after the installation of Windows Vista. In this scenario, the computer starts by using Windows NT Loader (NTLDR) instead of Windows Boot Manager (Bootmgr.exe).

  / ScanOs

  The /ScanOs option scans all disks for installations that are compatible with Windows Vista. In addition, this option displays the entries that are currently not in the BCD store. Use this option when there are installations of Windows Vista which is not in the Boot Manager menu.

  / RebuildBcd

  The /RebuildBcd option scans all disks for installations that are compatible with Windows Vista. In addition, this option allows you to select the facilities you want to add to the BCD store. Use this option when you need to completely rebuild the BCD.

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)