I updated my computer then everything happened to be small

When I updated my windows everything on my screen is small! The police, averything tabs! I don't know how to fix this help please.

Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

Change the screen resolution

Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • updated computer then error 'WindowsUpdate_80072EFE' always rises, if that had for months now__and the update itself is "WindowsUpdate_dt000".

    updated computer then error 'WindowsUpdate_80072EFE' always comes if it had for months
    and the update itself is "WindowsUpdate_dt000" Please help me! :)

    Which edition of Windows and what level of Service Pack is now on?

    IF it is Vista or Windows 7, open a command prompt
    Click the start ORB, type cmd in the search box
    Under programs, click on cmd.exe and select 'run as administrator '.
    If a password is used to enter it and then click OK. If no p/w is used, click on the button continue
    At the command prompt type the following and press enter

    netsh winhttp see power of Attorney

    If there is a proxy used then it will show slot next to Server Proxy (s)

    Current WinHTTP Proxy settings:
    Server proxy (s):

    To remove the Proxy Server, at the prompt, type in the following and press enter

    netsh winhttp reset proxy

    Now type exit, press ENTER to close the command prompt.
    See if the system can update now.

    Proxy is sometimes used if a suite of security or the 3rd party firewall (not the native firewall on Vista/Win7) is installed or if the installed antivirus is configured to analyze incoming e-mails.

    MowGreen Services consumer safety update

  • When windows update (KB968930) power Shell2.0 and WinRm20 for win Vista tries to install the thugs of the computer then restarts and crashes again and again

    • When windows update (KB968930) power Shell2.0 and WinRm20 for win Vista tries to install the thugs of the computer then restarts and crashes again and again

    Hello LisaQuaranto,

    I suggest that you configure the computer to start in minimum mode, download the update from the Download Center and try to install the update.

    To perform a clean boot on a computer that is running Windows Vista:

    a. Click Start, type msconfig in the search box and press ENTER.

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    b. on the general tab, click Selective startup.

    c. under Selective startup, clear the check box load startup items.

    d. click OK.

    e. When prompted, click on restart.

    f. after the computer starts, check if the problem is resolved.

    If your problem is resolved after the clean boot, and then follow the steps in the following article to narrow down the exact source:

    http://support.Microsoft.com/kb/929135

    In addition, refer to the section on how to restore your computer to a Normal startup mode by following the steps under "Reset the computer to start as usual", after performing the clean boot troubleshooting.

    You can download the update following the link below:

    http://support.Microsoft.com/kb/968930

    Thank you
    Irfan H, Engineer Support Microsoft Answers

  • First PRO CC 2014 closes after the launch, it happens after the selection / creation of a new project, the main interface is displayed for a few seconds, then everything disappears.

    Install the 30 day trial version, but first PRO CC 2014 closes after the launch, it happens after the selection / creation of a new project, the main interface is displayed for a few seconds, then everything disappears. How to fix?

    Hello

    Go to c: program files * 86:common: adobe: sl hide, rename the cache sl

    Go to c: program data: adobe: store sl: rename the store sl sl old store.

    Right click on first pro and run as admin.

    Thank you

    Arjun

  • I can't update my computer .windows updated.i have .and sevice pack 2 32 bit.

    SOMEONE HELP OUT ME... I can not updated my computer.i have have window xp and only 32 bit... and service pack 2.i just keep on getting errors after errors.i windows update cant, I try I get error... everything what I'm trying to download .i get error again.and I can't internet explore 8 .to .i download that.it gives me error for upated my Windows.vous can also send me an e-mail to * E-mail address is removed from Privacy * too.thank you...

    You can download the SP3 directly from here.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

    Once you have upgraded to SP3, then try to get the rest of the required updates (there are MANY).

    I hope this helps.

  • Help a update my computer resembling windows 95 and document issues! :(

    Hi I have not used my computer in about two weeks. I just turned on my computer and configured an update, rebooted and then proceeds to set up. He went to my screen which showed a background image of hello kitty that I placed there connection. But once you ID and waiting for my computer fully load the bottom black screen that must be an image, my startup toolbar looks like windows 95, all my documents does not appear when you click documents early upward (images, word, etc.), when you click on the download folder it gives me an error saying that I need a program , it shows that all my documents (images words, downloads, etc.) when I click on the name of my computer in the start menu up, which is strange, my computer mouse can be an animated hello kitty but now its back to normal, I lost all my favorites and I must now re-implementation to date of what was updated. Anyone have any ideas on how to help me with this? Or is it a new update of all HP computers have? I have a Windows 7 Home Premium HP.

    Thank you!

    P.S. When I say my computer it looks like Windows 95, I mean, fonts, and everything changed. The only thing that miss me is the challenge of chips and chimera, then it wouldn't be so bad lol.

    Hi I have not used my computer in about two weeks. I just turned on my computer and configured an update, rebooted and then proceeds to set up. He went to my screen which showed a background image of hello kitty that I placed there connection. But once you ID and waiting for my computer fully load the bottom black screen that must be an image, my startup toolbar looks like windows 95, all my documents does not appear when you click documents early upward (images, word, etc.), when you click on the download folder it gives me an error saying that I need a program , it shows that all my documents (images words, downloads, etc.) when I click on the name of my computer in the start menu up, which is strange, my computer mouse can be an animated hello kitty but now its back to normal, I lost all my favorites and I must now re-implementation to date of what was updated. Anyone have any ideas on how to help me with this? Or is it a new update of all HP computers have? I have a Windows 7 Home Premium HP.

    Thank you!

    P.S. When I say my computer it looks like Windows 95, I mean, fonts, and everything changed. The only thing that miss me is the challenge of chips and chimera, then it wouldn't be so bad lol.

    Hello

    Are you sure it is an update of Windows and not an update of HP?

    If an HP update, you will need to contact them.

    _____________________________________________________

    Do a Safe Mode if necessary system restore to prior problems.

    "In Windows 7 system restore:

    http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

    'Advanced options boot (including safe mode).

    http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

    "The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before starting Windows (press F8 at the rate of about once per second)"

    _____________________________________________________

    If graphics problems persist after that:

    Go to the website of your computer manufacturer > drivers download Section > then key in your computer model number > find your operating system > find two graphics / video or from the Chipset drivers and download and install.

    ______________________________________________________

    Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

    You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

    But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

    You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

    'Remove an update'

    http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

    'Remove an update - Windows 7'

    http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7

    When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

    "How to hide or show an update of Windows Vista"

    http://www.Vistax64.com/tutorials/72491-Windows-Update.html

    "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

    http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

    _____________________________________________

    Here's how to chanage update settings, if you think it is necessary to:

    "Understanding Windows Update and Extras in Windows Vista and Windows 7.

    http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

    Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

    Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

    Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

    But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

    See you soon.

  • Unable to connect wireless, said authenticate then nothing happens

    I have a windows 7, my problem is that my computer is connected to a wifi network in any place except my home network. I don't know that there is nothing wrong with the router, the modem, or the password to all other computers that operate normally. So when I try to log in, it say authentication then nothing happens.

    Original title: problem connecting WiFi,.

    Hello

    1 did you changes to the computer before the show?

    2. What is the full error message?

    This behavior can occur if the Enable IEEE 802. 1 X authentication for this network check box is selected. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.
    Please follow the methods and check with the question:

    Method 1:

    Disable authentication IEEE 802. 1 X

    To disable authentication IEEE 802. 1 X, follow these steps:

    a. Click Start, type ncpa.cpland then click on Enter.
    b. right click on your Wireless network connection and then click Properties.
    c. click the wireless networks tab.
    d. under preferred networks, click your Wireless network, and then clickProperties.
    e. click on the authentication tab, click to clear the Enable IEEE 802. 1 Xauthentication for this network check box and then click OK twice.

    Method 2:

    To remove and re-create the wireless network connection, follow these steps:

    a. Click Start, type ncpa.cpl, and then press ENTER.
    b. right click on your wireless network connectionand then click Properties.
    c. click the wireless networks tab.
    d. under networks Favorites, click on your Wireless network and then click on remove.
    e. click on view wireless networks.
    f. under management of the network, click refresh the network list.
    g. under Choose a Wireless network, click the wireless network to which you want to connect, and then click on connect.

    Also I recommend you to update the NIC drivers and check.

    Method 3:
    Put the computer to boot and search for the issue.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.
    Method 4:
    Uninstall and reinstall the NIC drivers and check with the question.
    a. click on Start menu, in the Search tab type devmgmt.msc and press ENTER.
    b. right click on network adapters, and then click on uninstall and restart the computer.
    c. after rebooting, install network cards and check with the question.
     
    For reference:
     
     
    Wi - Fi and in Windows network connection issues:
     
     
    I hope this helps.
  • I just updated my computer on windows 7 and I can't find my old favorites from before the update help?

    k so I just updated my computer and I can't find my favorites yet ive tried it before google search and the entire solution did nothing, I even tried the tasks of file that didn't work because I don't know what they would be under. Please help a lot of important things lost...

    First of all the set Windows 7 to show hidden files and folders, for details of how to proceed, see http://www.bleepingcomputer.com/tutorials/tutorial151.html

    Now set your computer look for a file called places.sqlite, you will find at least one copy in your current profile folder (the location where user data is stored). For more information on how to access your profile folder, see the article of profiles - where Firefox stores your bookmarks, passwords and other user data .

    If there is a second copy of this file also can contain your old favorites. With Firefox closed, rename the version in your current profile in places.sqlite.old folder, and then copy the other file in your profile folder. Restart Firefox to see if your old favorites are back.

  • Click on the computer then go to downloads, I can't scroll down, as seems to have shortened

    When I click on computer, then go to downloads that I can't scroll down as seems to have shortened what should I do to make the longer bar so I can scroll through the entire length of the screen

    Hello

    ·          When did you start to notice this problem?

    ·          The problem happens only when you browse downloads folder?

    ·          What is the version of the operating system running on your computer?

    ·          The window is maximized?

    Please provide more information to help you.

  • XP - continuous update from computer to restart / shutdown

    Automatic update is enabled, and apparently the same updates are entirely successful before each stop. This was repeated for several weeks now.

    Hi fox1929,

    This can occur if updates are not installed properly, the computer shuts down.

    Method 1

    Uninstall the updates failed, and then restart the computer.

    1 open Windows Update by clicking theStart button, and then click Windows Update.

    2. in the left pane, click view update history.

    3. to view more information about an update, double-click it.

    4. take note of the update failed, then uninstall the update failed.

    Use the Add / Remove programs in the control panel

     

    1. click onpie S, click run, type appwiz.cpl in the Open box, and then click OK.

    2. Click to select the Show updates check box.

    3. click on the update failedand then click Remove.

    4. follow the on-screen instructions to remove the update.

    Method 2

    Manually download and install the update failed from the Microsoft Download Center.

    http://www.Microsoft.com/downloads/en/default.aspx

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I cannot update my computer (error 0x80072ee7)

    original title: I'm unable to update my computer

    I tried to update my xp professional - when I do I get the error number: 0x80072EE7. When I click on the link http://www.update.microsoft.com/microsoftupdate/v6/troubleshoot.aspx?err=0x80072EE7&ln=en there is no support offered for this error

    When I go on the fixit site, IE tells me that it cannot find download.microsoft.com

    Hi Brent,

    Have you tried the steps here KB is listed as Windows Vista, however, it will also apply to Windows XP.

    In case you are unable to access the page:

    If Windows Update error 80072ee7 during updates, maybe you have to change or remove static IP addresses for the Windows Update service. The addresses are stored in an operating system file, called the Hosts file.

    The IP address for the Windows Update service can change each time you check for updates, but some programs Add on for Windows Add static address entries to the Hosts file. A static IP address for Windows Update prevents your computer from getting updates.

    To remove static IP addresses for the Windows Update Web site

    1. Open the computer by clicking on the button start , and then clicking computer.

    2. Double-click the hard disk where is installed Windows, typically the C drive.

    3. Double-click the Windows folder, and then double-click the System32 folder.

    4. Double-click the drivers folder, and then double-click the etc folder

    5. In the etc, right click on hosts file, click Open, and then, when you are prompted to choose a program to open the file, click Notepad.

    6. In the hosts file, check if the sign # appears next to each address and IP update of Windows host name entry. If this isn't the case, add the sign # or delete the entire entry.

    7. Click on the file menu, click on save and then try to check for updates again.

  • I always get the error massage 0 x 80070424 when I try to update my computer.

    I can't open any file and when I try to update my computer, I just get a massage of the error which is 0 x 80070424, what can I do to fix'it?

    Suggest that you first spread malware as the cause of the problem by following these steps:

    (1) have your system scanned by the antivirus/security suite installed.

    (2) run this tool from Kaspersky: how to remove malware belonging to the family Rootkit.Win32.TDSS

    http://support.Kaspersky.com/viruses/solutions?QID=208280684>

    (3) download, install, update and run full scans with two of these tools free anti-malware:

    MalwareBytes AntiMalware

    http://www.Malwarebytes.org/products/malwarebytes_free>

    SUPERAntiSpyware

    http://SUPERAntiSpyware.com/superantispywarefreevspro.html>

    (4) run the Windows XP and Windows Server 2003 System File Checker (Sfc.exe) tool:

    http://support.Microsoft.com/kb/310747>

    `~`

    If no malware has been detected, there's a Fixit on this page which will reset the Windows Update components:

    How to reset Windows Update http://support.microsoft.com/kb/971058components >

    Suggest you download and Save it. Then, close all the open programs and web browsers.
    Run Microsoft Fixit 50202.msi and choose its default mode.
    After that he finished the race, see if the return code is displayed again when looking for updates.

    If not, then run the Fixit once more and choose his Aggressive mode.
    Restart once it is finished and see if the return code always appears when the updates.

    IF malware is detected, then please post if it has been removed and that the specific name of what has been detected.

    07/23 / 1107:56:32

  • I come to me on my computer and everything was gone. All my files, shortcuts and backround have simply disappeared. It's like I've never been on my computer before. I have nothing! How to get everything back?

    I come to me on my computer and everything was gone. All my files, shortcuts and backround have simply disappeared. It's like I've never been on my computer before. I have nothing! How to get everything back?

    You have been discharged into a temporary user account. It may be a glitch, or your user account may be damaged. First try a system restore when things worked. If it suits it, fine. If it is not then your account is damaged and the best thing to do is to create a new user account and copy your data from the old to the new. I would also like to do a Chkdsk and then some hardware diagnostics on the hard drive and RAM to make sure that the material is solid.

    CHKDSK - click here to open the computer. Right click on the hard drive you want to check, and then click Properties. Click on the Tools tab and then, under error-checking, click check now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

    To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

    To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

    Click Start.

    Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

    Note: If you select automatically errors in file system of fix for a disc that is used (for example, the partition that contains Windows), you will be prompted, see the disk check for the next time you restart your computer.

    Hardware tests - http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

    Corrupt user account - if your single administrative user account is damaged (and therefore have what one user account is A Bad Thing), you must log on to the built-in Administrator (disabled by default in Vista) account. From there, you can create a new user account for yourself. In these cases, I prefer not to copy the whole profile to a new way to do not copy the bits corrupt. I prefer a new user account to copy the data (documents, photos, emails, etc.). Here are the instructions to do this. I assumed that you had only an administrative account, then you might want to take a look at the "general recommendations for setting Up user accounts in Vista" at the end of this post.

    All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

    Activation of the built-in administrator.

    Method 1. If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

    NET user administrator / Active: Yes [Enter]

    If you do not have a Vista installation DVD, you can either make a bootable DVD of Vista repair in the file at this link:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD.

    After net user, remove the bootable CD and restart the computer. You will now see an icon for administrator on the Welcome screen. Connect to this account.

    Method 2. Or you can use NTpassword to enable the built-in administrator. In both methods, you need third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the .iso image image file, not in the form of data.

    http://home.eunet.no/pnordahl/ntpasswd/

    B. create a new user account for yourself and by copying data from your damaged to her user account

    1. you are now connected to the built-in Administrator account. Go to control panel > user accounts and create a new Standard user for your daily work. Let's call it "Sheldon" for this example. Also create an administrator user, called 'CompAdmin' (or 'Tech' or similar).

    4 Ouvrezunesession 'Sheldon' once for profile files are created. Now log off 'Sheldon' and 'CompAdmin '. In "CompAdmin", disable the built-in security administrator. Do this from a command prompt:

    Start > Search > type: cmd
    When cmd appears in the above results, right-click and choose "Run as Administrator". Provide the password/OK to the UAC prompt. Now, you will get the command prompt. Type:

    NET user administrator / active: No. [Enter] and exit the command prompt.

    5. always in 'CompAdmin', you want to open two windows explore side by side. Open computer and navigate to C:\Users\old-corrupted-account. Now, do that again, but navigate to C:\Users\Sheldon. Copy the data from 'old-corrupted-account' on records in 'Sheldon '. Remember your Favorites, bookmarks (if you use Firefox) and by e-mail if you use an email like Windows Mail client.

    6. When you are finished, log in to "Sheldon. All your stuff should be there. When you are sure to have what you need, you can remove the old man-corrupted-account control panel > user accounts.

    General C. recommendations for creating users in Vista:

    You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is an OS multi-user with system built-in accounts such as administrator, by default, all users and guest. These accounts should be left alone because they are part of the structure of the operating system.

    In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

    The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

    If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

    Start Orb > Search box > type: netplwiz [Enter]
    Click continue (or provide an administrator password) when you are prompted by UAC

    Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

  • I need help to update my computer (error code: 80070424)

    original title: I need help to update my computer

    I could not update my computer for more than a year. I searched for the cause of this and have been unsuccessful. Whenever I click search for updates, it gives me errors, and then I click on get help with errors and tried troubleshooting but have not been able to solve my problem. Lately, he has been interfering with the update or install new programs. Now I can't update my Itunes or Ipod. I can't upgrade to Windows 7. I can ' t use microsft word because everytime I try to install or update these things, it won't let me. I've been putting off not to worry so much about the updates, but they have reached a limit, when my computer became difficult to use. The error code is 80070424.

    Restore the system to factory settings.  Install applications from their media keys/serial numbers and product, that you put aside.  Restore your data from backup.

  • I can't update my computer, the error code 670, I have vista, please help me...

    I tried to update my computer for several months and I get an error code showing 670.  When I click on help with the error, I do not see the error of 670, can someone help me please?

    Linda

    Hi Linda,.

    ·         Who is the update of the origin of this problem?

    Follow the suggestions below for a possible solution:

    Method 1: See the article below that may help you.

    Problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Method 2: If the problem is related to the update of Silverlight so I suggest you to uninstall all

    Silverlight, then try again, put it back.

    Visit the link below to install Silverlight:

    http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

    I hope this helps.

Maybe you are looking for