I upgraded to El Capitan and some apps are missing.

MacBook Air (13 inch, mid 2011)

MacBook Air 4,2

Intel Core i5 at 1.7 GHz

4 GB memory

I upgraded to El Capitan (10.11.3) and now the calendar and Contact applications are missing. I was not iCloud used for backup or restore.

Before the upgrade, I was running 10.6.8. I had a Time Machine backup on an external USB drive.

I went to Time Machine to restore the applications, but they are missing in the Applications folder. Strangely, the address book more older (v9.0) and iCal (v5.0.3) apps are here. I copied them to the computer and I can run them. My contacts reappear in somehow, but not my calendars.

I had the calendar and Contacts before the backup, and they worked normally.

I can't find a way to download the latest calendar and contacts applications. Any help would be greatly appreciated.

I would like to reinstall OS X from your recovery disk. I do not know what effect (if any) installation of older applications will have...

Barry

Tags: Mac OS & System Software

Similar Questions

  • Upgrade to el capitan and hoping to drive DVD would work properly but no, still do not play some of my DVDs. Is there an upgrade available? my library of playable DVD shrinks

    Upgrade to el capitan and hoping to drive DVD would work properly but no, still do not play some of my DVDs. Is there an upgrade available? my library of playable DVD shrinks. IMac originally purchased in 2010. DVD 5.9.5

    I'm having no problem with my DVD.

    Could you give more details about those who are out of work?

  • I've been upgraded to El Capitan and electricity went off and stopped the session.  I don't have time to continue for 12 hours.  It is the CV.  How can I cancel until I have more time?

    I've been upgraded to El Capitan and electricity went off and stopped the session.  I don't have time to continue for 12 hours.  It is the CV.  How can I cancel until I have more time?

    Hello nancy milano,.

    Thanks for this info and choosing the communities Support from Apple. I know how important is able to complete your update to El Capitan at a later date! The good news is that you can simply delete the "install Mac OS X" install app in the Applications folder on your Mac. Then you can open the Mac App Store when you're ready to update and restart the download from the tab updates or searching through the Mac App Store for El Capitan. This is a resource that explains the process of update more:

    Update of OS X El Capitan

    See you soon!

  • Upgrade to El Capitan and Win10

    Hello

    I have an iMac that has Yosemite and Windows 7. I use Parallels desktop 9. (But the windows partition is loaded through bootcamp)

    I get the message that windows free 10 ends soon.

    So I think upgrade to El Capitan and Windows 10.

    So I had to buy Parallels 11 to use the two new operating systems. (because 9 does not work with either)

    Here are the steps I take to do all three upgrades? I want to assure you that I am not missing something (steps):

    1. put on level 9 to 11 parallels

    2. upgrade to El Capitan

    3. connect via bootcamp and upgrade to Windows 7 to 10

    4. restart Windows mac and link 10 partition in parallels.

    Upgrades of the OS are big and not easily reversed, so I don't want to make a mistake.

    Any help is greatly appreciated!

    Thank you

    Avoid errors or problems with the updates of the first execution of a bootable backup of what you have that works. I suggest the following:

    Restart the computer after the ring, press in and hold the Command and R keys until appears the Menu Utility.

    1. Select utility disk in the main menu and then press the continue button.

    2. Select the destination volume in the list on the left.

    3. click on the tab restore in the main window of disk utility.

    4. Select the destination volume in the left list and then drag it to the Destination field.

    5. Select the volume of the source of the list on the left and drag it to the Source input field.

    6. check understood you, and then click Restore.

    Destination designates the external backup drive. Source means that the boot disk internal.

    Regarding the Parallels just upgrade the software and verify that your Windows system still works. You cannot proceed with the upgrade of OS X. Look this first: basic steps for the OS X upgrade.

    You can update Windows from Parallels. It is useless to try to boot from the installation of Boot Camp. In addition, you must first remove some components of Parallels on your Windows system to start independently.

  • Just upgraded to El Capitan and cannot access the calendar. It opens with a "Shift schedules to the server" message Can only Force Quit

    Just upgraded to El Capitan and cannot access the calendar. It opens with a message 'Moving calendars to the server.

    I cannot access all features and can be closed only by using force quit.

    Please stop calendar and also the application of reminders, runs. Force quit if necessary.

    Back up all data.

    If you synchronize some of your calendars, or reminders with iCloud, then in the iCloud preferences window, uncheck that marked calendars and reminders. You will be prompted to confirm that you want to remove your iCloud calendars and reminders of the computer. They will always be in iCloud. Re-check the boxes.

    If you synchronize agendas or reminders with another network such as Google service, please open the preferences panel Internet accounts. Make a note of the settings for calendar accounts, then delete and recreate.

    Launch schedule and see if there is an improvement.

  • M/S using wireless keyboard 800 and some characters are not displayed correctly

    Have just connected a new wireless keyboard M/S 800, and some characters are not displayed correctly. For example, I get "when @ (update 2) is pressed on the keyboard and the £ runs it shift 3.» Am currently using XP SP3.

    No problems with my original keyboard, Wired.

    Hi simoncd.

    What is your location.  The reason why I ask this is that your keyboard is set to the standard UK layout.  Looks like you have the keyboard for the U.S. keyboard layout.  Shift + 2 is the "on the UK keyboard, @ on the U.S. keyboard."

    To change the keyboard settings you must go to "Control Panel", then "regional and language options".  The first page allows you to set the number format and character relative to your location and also set the location.  Check these and modify accordingly so badly.  You want to then go to the second 'languages' tab and click on the button "Details".  Here you can set the default keyboard.  This changes if necessary.  This should, hopefully restore your keyboard to the presentation that you want.

  • I don't have a windows recovery disk and my computer is affected by virus now, I am also not able to downloat antivirus because some files are missing please advise__

    I don't have a windows recovery disk and my computer is affected by virus now, I am also not able to downloat antivirus because some files are missing please notify

    Please see: How to replace the lack of software Microsoft Carey Frisch

  • have 5 LR and CC. The folders are different, some are missing in the CC. And some complete are not available in CC. I'm looking forward to use CC rather than LR5 so how can I make the folders and collections even on each?

    have 5 LR and CC. The folders are different, some are missing in the CC. And some Collections are not available in CC. I'm looking forward to use CC rather than LR5 so how can I make the folders and collections even on each?

    Hi cjohnm,

    You can use the 5 Lightroom Catalog and improve it in Lightroom 6, therefor all folders and collections will be identical in both version.

    Open the Lightroom all holding the key Alt/Opt and select only the 5 Lightroom Catalog and it will switch to it.

    Let us know if that helps.

    Kind regards

    Mohit

  • Satellite A100: some files are missing when copying DVD on the desktop

    Hello

    Suppose I have 1000 files on a DVD.
    I drag all these files in the desktop, all of a sudden I see this is 920 files.
    If some files are missing.

    What this may be?
    There are no errors. I don't think that something is wrong.
    I initially thought maybe hidden files are counted in the DVD, but not on the desktop?
    Maybe something on the desktop?

    Anyone have any ideas? I tried to put it on 'To see the hidden files' - it's a Toshiba A100.

    I just ran a scan antivirus on this file and it let's say 1500 files analyzed.
    Haha. Antivirus but probably scanned all etc. desktop.ini and Thumbs.db.
    .. And maybe Windows Vista now have those when you want to display the number of files?

  • Satellite P300D-130 - some drivers are missing on Vista 64-bit

    Hello, I own a Toshiba Satellite P300D-130, model serial PSPDCE-000009FR, 78055027.

    I installed Windows Vista Edition (letters) Home premium 64-bit.

    Since this installation, no network adapter is detected, nothing appears in the administrator of ring road (ring road) of the NIC (map).

    In addition, there is a category in the ring road (peripheral) administrator the other roads (peripherals) of the ring "with ring 4 roads (peripherals) pilots (drivers) who are not installed (code 28):"
    -Mass storage controller, identification of hardware (equipment) N: PCI\VEN_1217 * DEV_7130 * SUBSYS_F F501179 * REV_01
    -Ethernet controller, N to identify material: PCI\VEN_11AB * DEV_4355 * SUBSYS_FF501179 * R EV_12
    -ring unknown road (peripheral), N to identify material: HDAUDIO\FUNC_02 * VEN_14F1 * DEV_5051 * SUBSY S_1179FF50 * REV_1000
    -ring unknown road (peripheral), N to identify material: USB\VID_0BDA * PID_8197 * REV_0200
    Finally, the graphics card is reported:
    -Standard VGA graphics card, identification of material PCI\VEN_1002 aboard N * DEV_9591 * SUBSYS_FF501179 * R EV_00 with a code 10 indicating that it cannot start.

    I downloaded the update to the BIOS for Vista 64 on the Toshiba site, but nothing has changed.

    Thanks for votrre help.

    Hello

    It seems that some drivers are missing on your laptop. ;)

    To solve the problems, you must download and install the drivers on the Toshiba site. You will find all the drivers for your Satellite P300D:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    If you have any other questions, please let us know!

    Welcome them

  • some files are missing (like network, Control Panel, systems, windows components) under administrative group policy template kindly help me on this

    some files are missing (like network, Control Panel, systems, windows components) under administrative group policy template kindly help me on this

    In the Group Policy Editor, right-click on administrative templates, add/remove templates.

    Usually, you would see:

    CONF
    Inetres
    System
    Wmplayer
    sooper

    If some are missing, add them as follows:

    Click Add and it will open a folder where you can add the missing elements to match the list back in, or to match the list on a system that works correctly.

    Restart to make sure that the changes stick.

    Each component has a history, you can Google for more information.

    Here is a good starting point:

    http://support.Microsoft.com/default.aspx?scid=kb;en-us;816662

  • When I start thesystem I get 2 errors in netdolst.dll and qWaves32.dll are missing

    When I start thesystem I get 2 errors in netdolst.dll and qWaves32.dll are missing, how and where can I download free others these files, the computer works fine except that when I start the system is very slow, and then displays error messages I tried the system restore, but this does not seem worked either I don't think restore points do not appear to contain everything that I never really use the restore of the system but like I said system works well except that I am living in a retirement home and cannot afford these packages fantasies you can send me an email to * address email is removed from the privacy * I'd highly appreciate your help as soon as possible because I am one of those who dislikes computers I would prefer to give me error messages can you send me instructions instead of put in place on the forum you can do it too if you want to thank you for your help, I am not an expert in computers, so I need a step by step instructions

    qWAVE.dll (without the "s32") is a legitimate file for Vista and Windows 7 but not XP.

    Searches on Google for "qwaves32.dll" and "netdolst.dll" increase only highly questionable links.

    When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.  Given that you know on torrents (and downloaded them?) increases the likelihood that you had (or still have) malicious software on your computer.

    First of all, download, install, update and run both of these free analysis tools:
    MalwareBytes AntiMalware
    SUPERAntiSpyware

    Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

    If the scans does not solve the problem (and they can't, because the actual malware dll file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

    Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.

  • SQL7.0 Enterprise Manager query cannot be executed because some files are missing or is not registered.

    Hello

    We have a VB 6.0 application and MS SQL 7.0 with windows XP operating system.
     
    We get the msg of error as shown below
    SQL7.0 Enterprise Manager query cannot be executed because some files are missing or is not registered.
     
    as well as when we give the impression of application (front-end server as VB 6.0) is not impression (from ast 2 weeks).
    previously, it works fine.
    But all other printed documents are works of MSword to Notepad etc...
    Please help me how to solve this problem.
    Thank you & best regards
    SURESH
      
      

       

    Hi Suresh,

    The issue of Windows XP, you have posted is related to Windows XP in a domain environment. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

    Hope the helps of information.

  • The addition of blackBerry Smartphones release: some files are missing signatures

    I am trying to create a new product for the Playbook. I correctly signed my bar, checked by opening and by trying on two different rules. But when I try to add an exit I get this error: 'some files are missing signatures' in the 'Add files' dialog

    What is going on? How can I solve this problem?

    EDIT:

    Here's a screenshot of the error.

    I now have a signed application verified.

    It was my fault for "CN" fields or the way I packed up the file bar. Compare my current application:

    Archive: ObscuredApp.bar Length Date Time Name--------- ---------- ----- ---- 1304 2012-03-15 23:16 META-INF/MANIFEST.MF 599 2012-03-15 23:16 META-INF/AUTHOR.SF 648 2012-03-15 23:16 META-INF/AUTHOR.EC 599 2012-03-15 23:16 META-INF/RDK.SF 280 2012-03-15 23:16 META-INF/RDK.EC 12329 2012-03-15 22:35 android/ObscuredApp.apk 1359 2012-03-15 23:08 android/res/drawable-hdpi/icon.png--------- ------- 17118 7 files
    

    With that I used:

     Archive: ObscuredApp_v5_properly-signed.bar Length Date Time Name--------- ---------- ----- ---- 1297 2012-03-07 03:01 META-INF/MANIFEST.MF 607 2012-03-07 03:01 META-INF/AUTHOR.SF 602 2012-03-07 03:01 META-INF/AUTHOR.EC 607 2012-03-07 03:01 META-INF/RDK.SF 280 2012-03-07 03:01 META-INF/RDK.EC 0 2012-03-07 02:58 META-INF/ 0 2012-03-07 02:58 android/ 0 2012-03-07 02:58 android/res/ 0 2012-03-07 02:58 android/res/drawable-hdpi/ 1359 2012-03-07 02:58 android/res/drawable-hdpi/icon.png 12329 2012-03-07 02:57 android/ObscuredApp.apk--------- ------- 17081 11 files
    

    In any case, this problem is resolved, with which I had new problems, but that belongs here.

  • ISE is associated with the AD, but some groups are missing

    People,

    In my ISE I already joined my announcement on a Windows 2008 Server. But when I retrieve groups with *, some groups are missing. I mean there is a band like XXX.COM\COMPANY\IDG\HR in my 2008 Server, but I can't get back in my ISE, the group is Global. Is this a bug of ISE or are there special limits in import of my groups in ISE?

    Kind regards

    ISE can retrieve the list of groups max 100 and as you have said that the number did not reach 100, check if the configuration of Active Directory in the user node Administration ISE
    the interface is correct or you can add that the lack of groups directly use that check the following to add groups manually

    http://www.Cisco.com/en/us/docs/security/ISE/1.0/user_guide/ise10_man_id_stores.html#wp1059262

Maybe you are looking for