I upgrades the operating system of my mac to OSX 10.9.4 and now my Dreamweaver CS5 does not work, it just that closes unexpectedly.  Help, please.

I upgrades the operating system of my mac to OSX 10.9.4 and now my Dreamweaver CS5 does not work, it just that closes unexpectedly.  Help, please.

It turns out that my video card is the cause. I removed the accidents stopped and he

Tags: Dreamweaver

Similar Questions

  • I downloaded the new software recently and now my Epsom printer does not work

    iMac late 2009. Processor 3.06 GHz

    Hi, I downloaded the new software recently and now my Epsom printer does not work and my Wi - Fi on the computer keeps dropping out.

    I spoke with Epsom and they recommended to remove the drivers and reinstall them. Now, I can not install the ad pilots Wi - Fi does not work correctly. The research on this forum I see there have been many problems with the new version of the software. Can someone help me?

    < re-titled by host >

    Try a reboot.

    Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

    Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

    Isolate a problem by using a different user account

    If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

    Safe mode - on El Capitan

    Start Mode without failure-El Capitan.

  • I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate.

    I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate how can I solve this
    I have an acer

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->
    Validation status: invalid license
    Validation code: 50
    Validation caching Code online: n/a, hr = 0xc004f012
    Windows product key: *-* - XY9X3 - JDXYP-6CJ97
    The Windows Product Key hash: xFQJU8srKsovk6p1Lk1yW93in4E =
    Windows product ID: 89583-OEM-7332157-00211
    Windows product ID type: 2
    Windows license Type: OEM SLP
    The Windows OS version: 6.0.6002.2.00010300.2.0.003
    ID: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF} (1)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows Vista (TM) Home Premium
    Architecture: 0 x 00000009
    Build lab: 6002.vistasp2_gdr.110617 - 0336
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 109 n/a
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->

    Other data-->
    Office details: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF}1.9.0027.06.0.6002.2.00010300.2.0.003x 64*-*-*-*-6CJ9789583-OEM-7332157-002112S-1-5-21-923204104-223683984-168055983Acer Extensa 5630 Phoenix Technologies LTD.V1.30 20090319000000.000000 + 00070333507018400FA04090409US Mountain Standard Time(GMT-07:00)03ACRSYSACRPRDCT109

    Content Spsys.log: 0 x 80070002

    License data-->
    The software licensing service version: 6.0.6002.18005
    Name: Windows Vista, HomePremium edition
    Description: operating system Windows - Vista, channel OEM_SLP
    Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 89583-00146-321-500211-02-1033-6002.0000-0042012
    Installation ID: 004511331255365043724851364501374781338933223323713385
    Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
    The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
    Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
    Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
    Partial product key: 6CJ97
    License status: Notification
    Notification reason: 0xC004F063.

    Windows Activation Technologies-->
    N/A

    --> HWID data
    Current HWID of Hash: OgAAAAEAAgABAAIAAwACAAAAAwABAAEAeqjWy6pVxGJ6f0DXhgfkNoBBsJzy9ErM1F/eG4QdrFYqhQ is

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes
    Windows marker version: 0 x 20000
    OEMID and OEMTableID consistent: Yes
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    APIC APIC PTLTD
    FACP INTEL CRESTLNE
    HPET INTEL CRESTLNE
    START PTLTD $SBFTBL$
    MCFG INTEL CRESTLNE
    SLIC ACRSYS ACRPRDCT
    ASF!            OEMID OEMTBL
    SSDT BrtRef DD01BRT
    SSDT BrtRef DD01BRT

    Ah! -in this case, it is not necessary.

    I see from my records that a similar case has been solved by uninstalling and reinstalling the update WAT - KB971033

    Open the Windows Update - click the link view updates installed on the left of the page

    in the list, find the WAT update KB971033, and then uninstall it.

    Then restart and reinstall the update from here - http://support.microsoft.com/kb/971033

    redemarrer restart again, then try to change your product key to the one on the sticker - what is happening this time?

  • I upgraded to ois9.3.3 and now my voice command does not work

    Yesterday, I did the upgrade of the ois 9.3.3 and since my voice command will not work.  I searched the internet for advice on how to fix but nothing that they suggest work.  How can I get rid of this upgrade and go back to what I had which works or solve this problem.  I need voice control for I can be hands-free while driving.

    Have you tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo come back? You won't lose data by doing this, but he cn cure some problems after installing new software or applications.

    Have you tried to downgrade from iOS?

  • I downloaded the latest update and now my internet explore does not work as it did before. I use a laptop with windows 7 ultimate with 32 bits.

    Windows 7 ultimate 32 bit

    There is no connection between Firefox and Internet Explorer from Windows.
    What exactly is the problem you are having?

    Perform a file system check to repair the corrupted system files
    Win 7, 8, 10, Vista: https://support.microsoft.com/en-us/kb/929833

  • The cursor does not work correctly, difficult to control! Help, please!

    Cursor is not working correctly, difficult to control!

    Help, please!

    Thank you!

    Hello Rudolf Jr,.

    If it's on a laptop, then it might be the sensitivity of the touchpad. Depending on the manufacturer of your computer, you can download a driver for the touchpad which may help. Or go to control panel, mouse-click and change the sensitivity of the touchpad settings.

    If it is a Synaptic touchpad, you can download the driver from the following location:
    www.Synaptics.com/resources/drivers

    Let us know if that helps.

    Marilyn

  • Mac Book Air has been Up dated at 10.8.5 and now Skype Video Chat does not work.

    Hey please help.

    I understand that Skype is trying to solve the problem, but I hope that I can work in the meantime. I have read the recent Post and nothing works. I can't find time machine or the Coremedialo file in my files to work with Skype. So please let me know if Skyp working on something and if I could download something in the meantime.

    Thank you

    Managed to do work! I must have typed in something wrong.

  • From my computer [windows xp] crashed and had his memory is erased and now my Ethernet controller does not work. The multimedia Audio Controller does not work either.

    Title says it all, I have had all the serv pack 3 so

    If you format your hard drive and reinstall Windows, then if possible put in all day and if not because of the ethernet connection, and then try to search for devices that has problem and download their drivers.

  • I move my file and now my slide show does not work? I think that something is wrong with the links here:

    < title > A sample HTML5 < /title > two-column layout

    < name meta = "description" content = "don't forget to add a 1-2 sentences describing here." >

    < name meta = "keywords" content = "don't forget to add 20 to 30 keywords important here." >

    < name meta = "viewport" content = "initial scale = 1.0, width = device-width" / > "

    < link href = "css/reset.css" rel = "stylesheet" type = "text/css" > "

    < link href = "css/style.css" rel = "stylesheet" type = "text/css" > "

    < link href = "css/slicknav.css" rel = "stylesheet" type = "text/css" / > "

    < link rel = "stylesheet" href = "css/nivo - slider.css" type = "text/css" / >

    "< link rel ="stylesheet"href="themes/default/default.css "type =" text/css"/ >

    < style type = "text/css" >

    {#apDiv1}

    position: absolute;

    left: 18px;

    top: 504px;

    Width: 909px;

    height: 96px;

    z-index: 1;

    background-color: #FFCC33;

    }

    < / style >

    " < script src =" http://cdnjs.cloudflare.com/AJAX/libs/Modernizr/2.6.2/Modernizr.min.js "> < / script > .

    " < script src =" http://AJAX.googleapis.com/AJAX/libs/jQuery/1/jQuery.min.js "> < / script > .

    "< script src="js/jquery.slicknav.min.js "> < / script >

    "< script src="js/jquery.nivo.slider.pack.js "type =" text/javascript"> < / script >

    < script type = "text/javascript" >

    {$(window) .load (function ()}

    $('#slider').nivoSlider ({}

    effect: 'fade ',.

    manualAdvance: true

    });

    });

    < /script >

    You have correctly identified the problem. To resolve this problem, you must set the links according to the new location of the files compared to the moved document.

  • Can someone tell me how to upgrade the operating system on the MacPro?

    I have a MacPro1.1 which works fine, but now I can't use LightroomCC on that because the OS is no longer supported. Can someone tell me how to upgrade the operating system on the MacPro?

    Your Mac Pro 2006 supports only as high as Lion unless you use a hack.

    If you want Lion then order a code to download here:

    http://store.Apple.com/us/product/D6106Z/A/OS-x-lion

    and then use the code in the Mac App Store.

    If you need higher that the Lion then Google for the hack

  • I have reinstalled the operating system on my Mac 10.6.8 &amp; can't print duplex

    DeskJet 6988dt. I had to reinstall the operating system on my Mac 10.6.8. Now, I can not the boxes to select duplex printing. I tried to delete the printer in system preferences, turn off the printer, removing the duplexer, put it back in place, turn on the printer, reinstall the printer in system preferences. Does not help. I still can't get the selections for double-sided printing.

    Any suggestions?

    Marj

    Also, please make sure the accessory of the duplexer enabled in the settings of the print queue:

    1. Open the system preferences
    2. Go to print & fax.
    3. Open the print queue of your printer by double clicking its name.
    4. Click printer setup
    5. Ring the driver tab.
    6. Make sure that the box next to HP printing accessory two-sided (duplex unit) .
  • upgrade the operating system

    I have currently Windows Vista Home Premium 32 bit (not happy with it at all) I am currently in the middle of reformat for the third and final time.  I want to upgrade the operating system to Windows 7 64 bit.  I'll be able to re - download my original purchase of Photoshop and Lightroom since January 2010?

    Direct download links for Adobe software

    And on a more general level, people make this clever trick called ups back-ups...

    Mylenium

  • After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault. Any ideas to fix this?

    After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault.  Any ideas to fix this?

    This was the solution!  The works of vpn as $ 1 million now.  I followed the instructions above to enter the uninstall program and selecting the repair option.  I rebooted the machine, then used the troubleshooting on vpn software compatibility option.  Selected Windows windows xp (service pack 2) as the correct software and cisco vpn client started right up.

    Thanks, Nick!

    Rick

  • I have two versions of the same book on my iphone and ipad.  I want the same book, so I can study on each device.  I tried to remove the books and start again.  It does not work.  Help.

    I have two versions of the same book on my iphone and ipad, which are not synchronized with the other.  I want the same book on each device, so I can study on one or the other.  I tried to remove the books on my phone, ipad & itunes and start again.  It does not work.  Help.

    Hello david.hogan87,

    Thanks for posting about what is happening. If I understand you correctly, you have a book you want on your iPhone and iPad, but neither is synchronizing correctly to have both.

    Have you checked every device to confirm that the same identifier Apple is signed all three?

    iPhone and iPad: head to settings > iTunes and App Store

    iTunes: on a Mac, it's under account or installed depending on the version of iTunes store.  On a PC, it is also under account, and if you don't see the menu bar, click on the triangle in the upper left corner to view the Bar Menu or CTRL + B on the keyboard.

    If all 3 have the same signed Apple ID, post the version of iOS and iTunes for all three devices here, please.

    Best regards.

  • Want a Smart Touch 23-065: I've upgraded to Windows 10 and now my bluetooth devices do not work

    I have a Smart Touch 23-065 envy that I have upgraded to Windows 10 and now my bluetooth devices do not work. They are detected, but not pair

    OK, line background peripheral bluetooth is not supported until the vendor provides a Windows 10 driver which is not yet and my never be available. Suppose if I want to use bluetooth, I'll have to get a usb adapter

Maybe you are looking for