I use 1023TX dm4, and I install the windows 8, it have problem ATI display driver
I use 1023TX dm4, and I install the windows 8, there is an ATI driver problem, I have two screen, one intel, and one is ATI. but ati driver does not, I need to turn off, can you help me?
Hi Tomiko094,
More than likely HP won't to material support for W8 on any system purchased before October 1, 2011. Most of the W7 drivers will work W8.
Have a look here http://goo.gl/hmPRB for a document official on the update of drivers and software
This document here http://goo.gl/CO6uV provides information on the upgrade to Windows 8
I hope this helps.
Tags: Notebooks
Similar Questions
-
Cannot install the Windows Server 2012, hard disk not found driver DC
during the installation of the windows server Datacenter edition 2012 on HP desktop using a USB flash drive I do not get the list of the hard drive for formatting and install an operating system on it. Help, please.
Server issues are better managed to the:
http://social.technet.Microsoft.com/forums/en-us/home
So please post your request there.
-
My laptop has been infected with a virus and I did a ghost to restore the system. Unfortunately, I chose the wrong disc hard Ghost in so packed in the computer Windows Vista laptop has been erased. So I want to know how to download and install again.
Please see: How to request a backup Dell drive
-
Can I install PS elements 13 and PS Cc on my PC? I want to be able to use my skills and according to the needs of the image function.
Different, different programs installed in different folders
-
I use Photoshop Cs5 on a PC that has been installed by the manufacturer of my PC in 2011, I tried to use it yesterday, and I get an error message saying to re - install the program. I have no knowledge on how to help.
Hello
Please access "' programs and features'" and uninstall the Photoshop CS5 and access the link as follows to download the program installation of Photoshop CS5 and re - install and activate it with the serial key you have.
Download Adobe Creative Suite 5 products
Thank you.
-
Hi, I am Ganesh, I tried to installed the application using creative cloud. But seems it's taking too long to install the application and it is hit. After the installation of 42%. Still, I tried to restart my computer and re-install the application. But it is keep taking so long time and struck at the end of the installation of 42%.
If the installation process is stalled at 42 percent with no possibility of error, there is a problem with the zipped file to Extraction of downloaded in the Temp folder.
As a fundamental step. Leave the creative Cloud desktop application.
Delete the contents of the Temp folder:
Optional: it will be ideal to install software like Winrar, WinZip or 7-zip,., etc.
Please press Windows + R and you will get a command window run, get hit and type %temp%.
Delete all the content inside the temp folder.
Then try again to install application InDesign CC again.Just in case, if you are still having the same issue.
Creative application cloud thus released, do not close it.
Open the Temp folder, then search for the CC InDesign installation file and copy it to the desktop computer.
Then leave Creative Cloud application and try to install.
-
I have a request that I wrote and have been use and distribute for awhile. The installer I created for this application is an additional installer to install a driver for the USB connection. The USB connection is actually a virtual COM Port. The problem is that the people who drafted modified driver setup the installation program itself. They used to have an installer that would check for 32-bit or 64-bit OS and then install the appropriate driver.
Now, they have two distinct installation programs: one for the other for 32-bit and 64-bit. They let the user know their OS and install the appropriate driver. I'd rather not have to rely on my users to do. From what I've seen the creater Installer provides that an executable to be run after the application installs.
Is it possible to have the installer of the application, check the type of OS and then run the correct executable file after installing my application? I think that I could write an Installer 'wrapper' that checks the type of operating system then executes the correct Installer. But I expect a better solution.
Thank you
JoeSo, I make it work!
The trick is to find a way to determine what type of OS you are using. The method I used was, indeed, read the environment variable. A buddy of mine sent me this link:
http://StackOverflow.com/questions/2401756/how-to-find-if-the-machine-is-32bit-or-64bit One of the phrases he bibliography the Processor_Architecture environment variable.
It seemed like a reasonable idea. So I started to research how read LV it environment variables turns out, you do it by reading a registry key. There is an example of LV on how to read a registry key. But I did not know where they are in the registry. So, I searched the Processor_Architecture registry. I found it in HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Session Manager\Environment.
According to the article in the link, this value will already be x 86 for a 32 bit OS, or something with 64 inside. I just check the response for x 86 string. If it is, I just run the x 86 version of the driver Installer. Otherwise, I run the x 64 version.
It turned out to be as simple as that.
I hope this helps someone.
Joe
-
Original title: Activation of Windows 7
Hello
I have windows 7 Home premium dvd I bought from microsoft. When I tried to install the app in my new laption it displays the error "the product key you entered cannot be used to active windows on this computer".
Please help me with this.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - 8DTXM - 6FQ2H-BKDY9
The Windows Product Key hash: tyrxnn4SwD4/dXymV2RGA4cQPHY =
Windows product ID: 00359-OEM-9801782-52192
Windows product ID type: 8
Windows license type: COA SLP
The Windows OS version: 6.1.7600.2.00010300.0.0.003
ID: {1BCBE11C-A21C-46C6-99B2-41DA76B3FEFE} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Home Premium
Architecture: 0 x 00000009
Build lab: 7600.win7_rtm. 090713 1255
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
[File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]Other data-->
Office details:{1BCBE11C-A21C-46C6-99B2-41DA76B3FEFE} 1.9.0027.0 6.1.7600.2.00010300.0.0.003 x 64 *-*-*-*-BKDY9 00359-OEM-9801782-52192 8 S-1-5-21-1079193163-3130481270-3640039680 Dell Inc.. Vostro 3558 Dell Inc.. A01 20150209000000.000000 + 000E9BB3607018400FC 0409 0409 India Standard Time(GMT+05:30) 0 3 109 Content Spsys.log: 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002The following files are available for download from the Microsoft Download Center:
For a 32-bit version of the Windows Installer update for Windows 7 for x 86 based systems (KB971033)
http://go.Microsoft.com/fwlink/?LinkId=150841
or if you have a 64-bit version of Windows
Install update for Windows 7 for x 64-based systems (KB971033)
http://go.Microsoft.com/fwlink/?LinkId=152411
Source: http://support.microsoft.com/kb/971033
Please, run again in normal mode and copy Microsoft Genuine Advantage diagnostic tool and paste the results into a response for further analysis:
-
Have a Dell system, caught a virus and it has really messed up the PC. Recently, it got worse so I tried to reinstall the operating system with the Dell disks. It wouldn't work. So I bought for Windows 7 Professional, it will not be installed. My first question when installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system? Because this does the same as the Dell disks, is to take what is on the hard drive and put it in a folder called windows old, is not formatting the HD. When I boot the disk, it shows the installation of files then open windows and start the installation. Before he could finish I get an error missing or corrupted files. Tried several times now, windows will still not open. Any suggestions? Once while trying to install the pc crashed with a blue screen which is one of the reasons why I have reinstall the OS, he started to plant a few times. I don't remember all the details on my PC, but its 4 years, triple core coprocessors, ram 8 GB, 500 GB HD. At the same time just after all this started in Jan. I had also improved my 3 GB to 8 GB memory. I bought the Dell memory for my system. Since the crash, could there be a problem with these new memory chips? Last night I tried to disassemble each and reinstalling it, but that doesn't seem to make a difference. Before I tried to reinstall the operating system, the pc was see the concert 8.
Original title: used to install Windows 7
Disconnect any other (additional) internal hard drives and external USB devices.
Look for any loose hard drive power or cables SATA, graphics card or other power cables.First run Memtest86 +:
It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
sticks are bad or the values of the SPD in the BIOS are correct.
Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
http://www.memtest.org/
Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
http://www.overclockers.com/forums/showthread.php?t=409152Hard drive test:
If you do not know your readers of the brand and model, try "Speccy",.
It provides information from the computer/system in detail:
OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
Note: Option RAM indicates number of slots, DRAM Timing.
Works your memory speed (frequency). The nominal frequency of your memory.
http://www.Piriform.com/SpeccyTest your player - create a Bootable CD:
Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.Test your drive with the car manufacture utility.
If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
(bootable CD) and check bad sectors.
SeaTools for information: http://www.seagate.com/support/downloads/seatools/
SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
SeaTools for DOS download:
http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en
Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htmHitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilitiesNotice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnosticAlso check Home Edition free Partition Wizard option "Test of disc surface":
http://www.partitionwizard.com/free-partition-manager.htmlJ W Stuart: http://www.pagestart.com
-
Cannot print to installed printers (HP3050A and HP7160) of the Windows 7 laptop
Since the installation of software for HP3050A printer on my laptop (Windows 7 32 bit OS) while "seeing", will not recognize printer when sending to print. Message always reads the printer must be added. Since the installation of HP3050' software were unable to print on any other network or direct printers (HP7160), who had worked. Suspect Windows 7 OS has been damaged. Have reinstalled the HP software several times to nothing does not. All well on 2 other computers with Windows XP
Hi Julie,.
Uninstall the printer from Add/Remove Programs, and then install the full software functionality via the USB port. If you are unable to print, we consider that there is a problem within the operating system on the computer that helps the prints failed to the spooler. Let me know what you find?
-
original title: no camera not connected to this computer.
Today I bought a LifeCam VX-3000 and I installed the software but when I open it it says there is no camera connected to this computer.
Help, please.
Hi Shaykc,
Here's a quick walk to implement this cam:
http://support.Microsoft.com/ph/7746#tab1
Eddie B. -
Equipped with Vista 32-bit, lost sound and cannot install the Realtek-get code 800705 b 4, can anyone help, BB * address email is removed from the privacy *, thank you
How does this relate to the features of Windows Update?
-
tried the Device Manager and add/install the old hardware on the wizard... he finds ADSInstant HTV PC1, but sending the message... Impossible to install correctly the code 10
Restore the system to then it was working properly.
-
I try to install the windows easy transfer and I get the error.
I try to install the windows easy transfer and I get the error, "the version of windows you have installed does not match the update you are trying to install. I download and install the 32 and 64-bit version for XP. I also downloaded and tried both 32 and 64-bit version for windows 7.
On which version of Windows 7 you are trying to install Easy Transfer? Easy transfer seems to be automatically installed on Windows 7. You run Easy Transfer on Windows 7 to 'prepare' the copy, you need to be running on the 'old' PC.
-
When we try to install all applications on the Cloud Office it crashes at 90%. If we run the application it works. If we try to update the application from the desktop cloud it hangs at 50%. We have already reconfigured MAC and re-installed the application of desktop application and cloud several times. The OS is Yosemite.
Hello
Please, try the following steps:
- Log out of the desktop Adobe CC application. (https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html)
- Set the "Read and write" permissions on the files of Adobe for all users in the following locations:
- / Library/Application Support /.
- /Users/ [user name] / Library/Application Support /.
- Restart the computer.
- Connect to the desktop Adobe CC application.
Kind regards
Sheena
Maybe you are looking for
-
My keyboard is write the numbers instead of letters
MY keyboard is write the numbers instead of letters. The firstbletterbiscok, but it converts every letter in a number
-
When I try to scan with my CanoScan N640P ex scanner I receive a message indicating the Port to the printer that is used by another device. How can I work around this problem?
-
This card will suit my Precision 490 workstation?
First of all, I want to thank Hunter for this thread and JMichael (and all) for reactions/answers interesting and very informative! I bought a refurbished Dell Precision 490 work coming arrived today. (yay!) The one I bought has the following specifi
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas:How can I create a group or a list of contacts on Outlook Express. I found the answer in help, but cannot locate elements, on what he ask
-
Hi I have a HP Probook 6470 b. After installation of the latest series of Windows updates my laptop fails to open the common programs such as Word 2010, Adobe Acrobat Pro and Internet Explorer 11. Other programs such as Excel 2010 and Chrome are not