I use a 27 "lcd screen and I can not change the resolution, the slider will not slip off, also windows is a generic monitor, I need to change for aero to work

Similar Questions

• An e-mail message is constantly on the screen and I can not remove or change.

  original title: E-mail

  an e-mail message is always on the screen and I can not remove or change

  Hello

  1. What mail client do you use?

  2. what happens when you try to delete the e-mail?

  3. you receive an error message when you try to delete the e-mail?

  4. where did you receive this email?

  You can try the following and see if it helps.

  Method 1

  You can try to delete the e-mail in a clean boot state, and check if the problem still persists.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  1. Click Startand then click run.
  2. Type msconfigand click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Check whether the problem is resolved.

  Method 2

  I suggest that you run an anti-virus from the link below.

  Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-AU/default.aspx

  Hope this information helps.

• Since then went black download firefox 4 top and bottom of my screen and I can barely see the button/arrow to the left

  Question
  Since then went black download firefox 4 top and bottom of my screen and I can barely see the back/arrow button, if I can not go back to 3.6 and you'd have to show me how, step by step without computer talk if it is not possible for you that I return to internet explore... cordially chris williams

  You are welcome. I'm glad that you were able to find a solution with the information provided by the contributors here.

  So that other users can find solutions to Firefox previously asked take charge of issues, please take a few minutes to come back on the forum, log in, then click 'resolved' next to the answer above you helped more to find a solution. Thank you.

• I used my two licenses and I can not turn off dreamweaver from my old pc. When I try to open dreamweaver from my old computer, it is said the license is no more valuable. What can I do?

  I used my two licenses and I can not turn off dreamweaver from my old pc. When I try to open dreamweaver from my old computer, it is said the license is no more valuable. What can I do? Is there a place I can call for assistance?

  Contact customer service and ask them to help you.

  Scroll down to still need help?  Click on Contact us.

  Learn how to enable or disable Adobe applications

  Nancy O.

• Hard drive crashed and I can not turn off Lightroom

  Hard drive crashed and I can not turn off Lightroom in order to to use on another computer.

  Hi johnr.

  What version of Lightroom do you use?

  If you use the CC version, you can simply install it on any computer (if exceeds the number of activations, you'll be prompted to disable)

  If you are using the standalone version, let us know what version do you use?

  You can also contact us to contact customer service

  Kind regards

  Assani

• Switched laptop (same model) with the HDD same, 13 items said again it is already enabled on the previous computer and I can not turn off now.

  Hello. My 13 elements license allows installation on 2 computers. I use a PC and a laptop. I changed laptops (which was broken, new laptop is 100% same model laptop) and put the hard drive of the computer laptop old in the new. Elements says now, it is already activated on 2 computers when I enter the serial number. There is no way (except the cat from adobe, which is not available on weekends) to turn off the old (or all) computers to activate again the two computers?

  If you must turn off and you can not disable, you must contact adobe via chat.

• the Windows installation (repair) does not work on a normal mode due to the error on blue screen and I can not access a SafeMode more due to the installation of windows

  Hi everyone, my dell inspiron 6400 does not work in normal mode due to a blue screen error 0x0000007E, 0xB8D4278E, 0XBA4CF038 and 0XBA4CED34. It also shows an error igxpmp32.sys. Unfortunately, I complicated issues when I tried to fix it by using a windows installation disc. Now, windows setup wont run on normal mode the blue screen still exists and I can't use safe mode again as custom configuration windows running on safe mode. Help, please

  Hello

  -Don't you make changes to your computer because of which the question began?

  I would recommend that you disconnect all external devices and third-party drivers such as mentioned in this article and check if the problem persists.

  How to troubleshoot a Stop error 0x0000007E in Windows XP

• trying to open up to gamesmith/freeverse game in full screen, not able to do. I want to welcome on gamesmith/freeverse games. The screenshot is of about 1/3 of the screen and I can not open any more wide, so unalbe to reach the controls in order to host a

  card games screens do not open mode full-screen. I get about 1/3 of the screen on my computer 15 "laptop and it opens any more, no cursor to move either. the games are Freeverse's gamesmith. any suggestions? Windows vista 64-bit

  Hi Normand1953,

  1. how do you try to host the game?
  2 is using any application or using Internet Explorer?
  3 are you able to browse websites successfully?
  4 you can also visit the Gamesmith help support Web site.
  http://www.GameSmith.biz/support.html

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I use CS3 design premium and can no longer use the license. It does not start and I can not turn off.

  I got an error saying that Licensing has stopped working. We downloaded a small .exe (LicenseRecover) file, but it didn't work.

  We started again to the computer and we had another error, saying that he had to uninstall and reinstall. But if we uninstall, we uninstall without disabling, so this isn't an option.

  This is the error we get when CS3 starting now: you may not use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contact your COMPUTER administrator or Adobe customer support for assistance.

  So I tried to support the customer online. Seems that there are no online support more for CS3!

  How can I make it work again? I really need the software for my work.

  If you only installed and active software once before, you still have an extra activation to your disposal.  So if this is the case you can uninstall and reinstall and reactivate using your serial number.

  You can also get Adobe support by chat to reset your activations - they are likely not available until after the end of the week.  Do not ask for more than that but or they will tell you that they do not support for older software installation problems.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• The right edge is off the screen and I can't adjust the width.

  Somehow, I have the column on the right side of the screen and now it can not reach to reduce the column width, so I can see the part of the message.

  On the toolbar > Options (mouse hover on a menu appears, do not click on options) > Presentation > vertical display

• BlackBerry 10 functions and features can not turn off my Blackberry Protect z10 after changing the password ID.

  My wife's phone was last updated the operating system more recent 10.3.2. I then tried to access a service and found when he asked for the Blackberry ID, we had forgotten the issue of password and user. Then I deleted the ID and set up a new. I can connect to the new identification, but he cannot confirm on the z10. Then I thought to wipe the z10 back to factory setting. However; the z10 shows that BB Protect is enabled and we cannot turn it off using the passwords that we try.

  I have logged on to the site of BB Protect and found there is no device associated with this Userid. Also, I find the screen for the current user ID name using our existing email address differs from the one showing on the screen z10 Blackberry ID. name I tried to change the screen name and password on the ID to be similar to the z10 site but it will not accept it.

  So now I'm unable to wipe the z10, or change the ID info to make it usable when required. I also noticed, online, there are instructions for the new OS 10.3.2 informing us that no wiping ability to Protect is disabled. There is no instructions on how to so that when a problem arises like mine.

  Help, please.

  I searched for a solution and I finally found one that works. It was posted by asokhay about a week ago and is as follows:

  "I found the solution!

  I connected my passport for Blackberry link and clicked on "back up and restore" in the left navigation tab. Then I clicked on Factory Reset. He asked me to unplug the unit and when I did the wipe of security has started to happen. "

  This works, however when I wipe the phone it took about 30 minutes. By reading this forum I found that some wipes can take several hours to complete depending on the amount of material is on the cell phone.  As I could not ' t register anything before this wipe I have to start over from the beginning. " Fortunately my wife added very little to the phone, such as applications or photos.

• Both sides of the Firefox are away from the screen and I can not restore initial sizing. Help!

  I tried to reset the toolbars, etc. in safe mode. I tried ALT-SPACE not plus size without success.

  Backmark,
  What OS?

  You are able to reduce the size of the Firefox window low enough to move it around or not?

  You have DoubleClicked on the top of the Firefox window? or click F11 if full screen? After that you get full-screen, if this is the problem, double-click the window frame on top and your window must be resized down a bit, and then enter the same window Frame, slide, he left, until you can reach the lower corner on the right, take the corner and drag it to the desired size.

  Let us know if it works or not.

• When I download apps, someones are dissappeared on the main screen and I can not find.

  How can I solve this problem?

  Hello!

  Try to slide all the way to the right on the home menu to see if applications have been moved to a new page.

  If this isn't the case, you can get to them In Firefox OS Adaptive Search Appusing.

  I hope that helped! Feel free to post back with more questions.

• My phone locked and I can not turn off now

  This may sound silly, but how in the battery on this phone. My phone is locked and I want to turn it off, but it won't. Help!

  @Jeanno69

  Press and hold the power & volume for 10 seconds

• When I open a tab/icon on my computer is much too large for my screen and I can't use my computer; 3 boxes in the upper right corner.

  When I open a tab/icon on my computer is much too large for my screen and I can't use my computer; 3 boxes at the top right corner with the-, square and X are too far to the right to do anything. How can I fit on my screen, so I can use my computer?

  Hello

  Please contact Microsoft Community.

  This problem is limited to any icon or it happens with all?

  Did you change to the computer?

  I suggest to refer to the following methods and check to see if it helps:

  Method 1:

  Install the latest display driver and check

  Uninstall the driver from Device Manager display.

  a. close all programs. This will ensure that the programs do not interfere with the update of the driver.
  b. right-click on my computer, and then click Properties. This will bring you from the System Properties menu.

  c. click Device Manager
  d. expand the display column of cards by clicking on them. This will show the graphical current map that is using your computer.
  e. right click on the adapter, then select Properties.
  f. click on the driver tab. This tab displays information about the current driver, as well as options to update, delete, uninstall, and back the driver.
  g. click on uninstall
  h. restart the computer

  You can install the latest display driver for download on the site of computer manufacturing, same driver will reinstall automatically after the restart, if the computer is connected to the Internet.

  Method 2:

  I suggest you try the system restore. Restore the system to a restore point when your computer was working fine

  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  You can also check the Device Manager to see if the video card has a yellow exclamation on it with an error any:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/device-management

  I hope this helps.

  Kind regards
  Anusha