I use a Belgian keyboard and the CAPS of SHIFT or alt + tilde do not work for me

Hi I have a similar problem: I use a Belgian keyboard and the CAPS of SHIFT or alt + tilde do not work for me. I can configure default Hiragana in the locale, but it is not honored - lights in romaji and I have to click the icon pon :-(

I feel bad: I bought the expensive 'Ultimate' version of Windows to use it for the Japanese language, then I discovered that Microsoft IME is unusable. I can't click an icon all five words, I need the default to work as configured and shortcuts too (and I'm not the only one, a lot of people write Japanese under Windows I guess)

Research in other forums, this seems to be a known gene since Windows XPand still not been resolved in Windows 7? I hope it's in Windows 8.

I'm ready to upgrade to 8 or modify registry settings, install additional DLLs or something else, but I feel it too bad if I install a linux to be able to do what I bought Ultimate for :-(((

Split from here:
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/changing-Microsoft-IME-language-input-default-it/a63cf759-d665-48b1-93fb-90d4a2d6cb72?page=2#footer

Hello

I suggest you to send your comments to the following Web site.

Give us your comments for Windows 7

Tags: Windows

Similar Questions

  • my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

    my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    Once iTunes to work properly, you should be able to fix your device.

    TT2

  • The button create a new paragraph style does not work for me, is this a bug or something stupid I did?

    The button create a new paragraph style does not work for me, is this a bug or something stupid I did?

    Pages on El Capitan 10.11.1 v5.6.1.

    I just created a quote indented using ITC Garamond Book Italic with left and right margins altered. Well selected, I clicked on the + symbol in the paragraph, named the new Styles pop-up style Indented quote and you press return.

    Always selected in the body of the document, I applied the body paragraph Style to restore the normal formatting and then with the text again, the paragraph of citation Style indented - who worked as expected.

    If you want that your new Style of paragraph to survive across documents, you will need to save it in a model. You can also have two different Pages, documents open in Pages v5.6.1, and copy/paste the custom styles between the selected text in these documents by using the Format menu.

  • wireless multimedia keyboard Microsoft 1.1 on my desktop using Vista home premium and the keys are coming all wrong

    I have a multimedia keyboard 1.1 microsoft wireless on my desktop using Vista Home premium, and the keys are all coming up badly, when I type 'k' for example I get 'a' or if I type 'p' I get 'v' and give me space '9' someone can tell me how to solve this problem?

    Hi Winchesterdream,

    Welcome to the Microsoft answers community site.

    I suggest you try the following steps

    Step 1: Connect the keyboard to a different computer. If the keyboard works correctly on another computer, the port to which the keyboard was connected on the original computer may be damaged. If this is the case, contact your computer manufacturer to find out how to repair or replace the damaged port.

    Step 2: Download and install the latest keyboard software

    To download the latest drivers for the keyboard that you use, see the following Microsoft hardware Web site:

    http://www.Microsoft.com/hardware/download/download.aspx?category=MK

    Step 3: Press the SHIFT key to turn five times keys Stick On or Off and check if the problem persists.

    Let me know if it works. Good luck!

    Hope it will be useful.

    Thank you and best regards,

    KKS Vijay

  • I want to hang the Tower up to my big screen and instead of using a keyboard, I bind a tablet that I can use as a keyboard and to manipulate objects on the screen in real time

    I am in the middle of do a remodeling and think about a furture upgrade my PC at home, I want to hang the Tower up to my big screen and instead of using a keyboard, I want to connect a tablet that I can use as a keyboard and to manipulate objects on the screen in real time. Is there a way to do this?

    (1) before the PC upgrade, please read the complete technical documents for all devices

    you want to go to upgrade

    (2) it is the first thing to do to make complete lists of materials you want to change.

    Compare specifications detaily, note important diference between many of the same features

    (3) for more information on some devices and materials, see link below

    http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-us

  • Problem starting el capitan (sierra) - built-in keyboard and the mouse do not respond

    Hello

    I have a 2015 macbook pro (SSD 256, 16 GB of RAM last el capitan updated) with a wired problem.

    I use it mainly to a cinema monitor and I use wireless keyboard and mouse (office installation program), and of course as a stand-alone laptop when I'm not at my desk.

    When I put the laptop to sleep, everything works fine when I wake up.

    but, if I'm away from the office and I have to restart my laptop, here is the problem.

    The boot process is very very slow, there is no edge, and when I finally have the screen to unlock the safe, the keyboard and the touchpad do not react. Actually, that's not exactly true, they are so slow that they are unusable and get caught quickly, all gel. So I can't unlock and complete the boot. My laptop is unusable ;-(

    At this point, I get a message that if I forgot my password I just need to reboot by pressing the power button, and I'll be able to reset it.

    When I do this and aprΦs the dΘmarrage that more slowly than usual but ok, I get another screen with several options of problem solving. One of them is "keyboard not responding do not. When choosing this one, it asks if you want to remove safe. I tried and everything was back to normal.

    later, I delivered safe and I had the same problem again. I did the thing to be able to restart again and improved to sierra in the hope that it would disappear. However, the problem is still there.

    I thought I could try to restart my office to see if my keyboard and wireless mouse would still work. Indeed, even if responsiveness was not normal, I could unlock and fill the chest.

    I have the impression that my laptop always "believe" it is on my desk, linked to my screen (probably the reason why I don't hear the Bell) and to my wireless K & M.

    It's really annoying and I hope someone has a solution.

    Thank you very much

    best,

    Alex

    I'm having a similar problem with macOS Sierra which I didn't have with El Capitan.  I can possibly move the cursor on the power button and turn off (no), but I must be patient because the keyboard and trackpad are only for a fraction of a second, which only allows me to move the mouse slightly.  After he stop and start back up, everything is perfect until I tried another reboot, and then I'm back to the beginning.

    I tried to reinstall the operating system, reset the SMC, resetting the NVRAM, reboot in SafeMode... nothing worked so far.

  • The keyboard and the mouse no longer works to update you Sierra

    Hello, I upgraded to OS Sierra and I began to spend more and suspending Notepad, then I do not recognize their keyboard and mouse notbook. It forces the walk outside and then worked, but after a few days I don't work any more.

    Thank you

    The keyboard and the mouse no longer works to update you Sierra

    Hi gnardone,

    Thanks for posting in the Community Support from Apple. I understand that you are having problems using your mouse and your keyboard after the update for Sierra. View the work of keyboard and mouse are crucial for your Mac, so I can understand how this is a problem for you. I'm happy to offer assistance.

    You are having problems with the keyboard and the trackpad that are part of your MacBook or you are having problems with a keyboard and an external mouse? I recommend taking a look at the article below.

    If your Apple wireless mouse, keyboard or trackpad doesn't work as expected

    If you're still having trouble, let us know what kind of mouse and keyboard that you are having problems with and what you have tried to solve this problem.

    Best regards.

  • Macbook Air using with mouse, keyboard, and external display?

    I want to put in place a more ergonomic work station. Can anyone recommend how I can configure my Macbook Air 13 "to use at home with an external monitor as well as an external keyboard and mouse? What is the easiest and most cost-effective way? Is a necessary dock if I buy a bluetooth mouse and keyboard, then simply plug the monitor each time? Could I use this set up with my macbook screen closed? I bring my Macbook to every day, so it must be easily plugged/unplugged. Thank you.

    A dock is not necessary. If you use a USB keyboard and mouse or a BT, it is up to you. I use a BT Magic Mouse and Apple keyboard in my office. That leaves just two things to plug: monitor and the power cord. When you use an external monitor as primary monitor you can close the lid of the computer and it will not go to sleep.

  • Satellite C850D-11 q - keyboard and the Touchpad does not

    The laptop is a little more than a year and worked ok until recently.

    Symptoms were the keyboard and the touchpad does not not on page 8 of windows logon. Pressing power to put the laptop into sleep and pressing still often got their work.

    He progressed to the keyboard and the touchpad works do not randomly points while the use of the laptop.

    Finally cleared the HARD drive and restored windows 8 alone, the laptop still BSOD quite frequently - refuses to install the updates required for 8.1 and the keyboard and mouse often do not work even in BIOS Setup page. I reinstalled the RAM and HARD drive.

    Short of ideas, the keyboard and the touchpad work and so I guess that their connections are correct - but often they just stop.

    Any ideas appreciated?

    Thank you

    Hello

    > Finally cleared the HARD drive and restored windows 8 only
    I hope that you created before Toshiba recovery disks you have formatted the system.
    Did you?

    The recovery disks will allow you to reset the laptop to factory settings; on the same State as at the first day of the purchase.

    > First symptoms were the keyboard and the touchpad does not not on page 8 of windows logon. Pressing power to put the laptop into sleep and pressing still often got their work.
    Well, usually the keyboard problems are not problems system or software as the keyboard driver is part of the system and an additional installation of some drivers is not really essential and necessary.
    That is why in most of the cases the keyboard problems could be the causes of physical problems.

    However, after using the recovery disc and the parameters of the laptop back to factory State, both parties (keyboard and touchpad) should work perfectly.

    > the BSOD laptop still quite frequently - refuses to install the updates required for 8.1
    BSOD doesn't look very good. As mentioned above; parameters of the laptop back to factory settings should solve all the problems in the system. In the case where the BSOD appears even if the power has been turned back to factory State, a hardware problem could be the reason for this.

    I had also some problems with the update 8.1 Win. The system to win 8 could not find the Win 8.1.
    But the reason for this was simply. I had to install all updates to Win 8 and had to update the State system before trying to update to the next level following 8.1 Win

    So, what can I say: I will try to put the laptop initial configuration using the recovery disk.
    Then I would try to get automatic updates (a few reboots were essential too). After that, I would check the functionality of the keyboard and the touchpad. In the case where them parts would not work, I would contact the service to check if the two pieces.

  • System Restore with the keyboard and the mouse works do not and do not know admin password

    I recently decided to update my drivers on my 9 year old bridge. Apparently the program that I used to do didn't realize a bad driver when he sees... Sort of my keyboard and mouse not responding while windows was loaded. They work enough for me to access the bios, enter the menu start and also when I hit enter to boot from a windows cd.
    I'm trying to access my restore points to get rid of the driver that has been installed. Unfortunately when I put the windows CD and try the repair option I can't log on to the volume because it requires an administrator password. I tried Admin admin admin admin and leave blank. I even ran a program to reset passwords (I do not use any which way.) still cannot log on to the volume. I also tried to pass in front of the screen to repair and installation of windows to fix this. I can hit escape and pgup and pgdown but not f8 to agree to the agreement.
    When I boot in safe mode with command prompt that it still forces me to click on an account to connect. Which I can't because the keyboard and the mouse do not work when windows is loaded.
    I can't get to the command prompt to display the box to help restore points?

    Hello

    ·         Did you do changes on the computer before the show?

    I suggest you to follow the steps in the article in the Microsoft Knowledge Base and check if it helps.

     

    How do I recover from a corrupted registry that prevents Windows XP startup

    http://support.Microsoft.com/kb/307545

    Regarding the password administrator there are chances that you must have defined and now you don't remember or if the bridge keep some default password. You can also contact the Support Technology Gateway for help on the issue.

    Technical support Gateway

    http://support.gateway.com/us/en/support/default.aspx

    Hope this information helps.

  • Reset computer to factory settings, installed SP1 and lost control of the keyboard and the mouse. Had to do system restore just before the installation of SP1.

    Original title: help

    OK to reset to factory settings to allow hopefully laptop to read CDs again, then downloaded installed sp1 and lost control of the keyboard and the mouse, and still can not play music not forget hadda restart in safe mode to use the system restore to just installing the sp1 b4

    Hi MartyFenwick,

    I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

    To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

    1. What is the brand and model of the computer?

    2. What is the brand and model of the mouse and keyboard?

    3. you receive an error code or message?

    4. is everything works well after running system restore?

    5. what exactly do you mean by "hadda restart in safe mode to use the system restore to just installing the sp1 b4?

    6. what happens when you try to play music CDs?

    7. what program you use to play the CD?

    Please follow the methods and mark the question below:

    Before you install SP1, follow the method 1 and 2.

    Method 1:

    You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

    To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

    Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

    Method 2:

    I suggest you disable the antivirus for temporarily until the installation of SP 1.

    Disable the antivirus software:
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 3:

    Follow the steps in the link for problems with the keyboard and the mouse below.

     
    Mouse, touchpad and keyboard with Windows problems:

    http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

    Method 4:

    Follow the steps in the link below.

    Learn how to install Windows Vista Service Pack 1 (SP1):

    http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

    I hope that the information above helps you.

  • loss of function of the keyboard and the touchpad

    I am a rural small repair shop and received a HP/Compaq Presario CQ60-615DX to repair the loss of function of the keyboard and the touchpad. My first thought was that the Ribbon connectors came loose. However, when I first turned it on, the keyboard worked to enter the Windows password. Once started, the keyboard would not work. My client had a major sale/repair company and their solution was to install a keyboard on the screen and use a wireless mouse. I started my research in this tthinking of problem that perhaps it was caused by malicious software. Fortunately my client gave me the AC adapter while I was looking for input on the laptop voltage. It wasn't on the outer label, so I removed the battery. I reinstalled the battery and was amazed to find that both keynoard and touchpad work now.

    What could have caused this loss of function and why would be to remove and reinstall the battery solve this problem?

    It's probably that the battery actually acted as a hard reset.  A hard reset has the effect to remove remaining current EEPROM and other devices on the motherboard.

    Best regards

    ERICO

  • My keyboard and the touchpad are locked, does not respond to what it is.

    My keyboard and the touchpad are locked, do not respond to what it is. I activated the screen keyboard on and it works. It is a G71-340US, Windows 7. I think it happened when the battery died while in a Word doc. computer is turned off. Plugged. Turned, password screen appears, could not type anything in the box. The mouse works. My keyboard and the touchpad are locked, do not respond. Restarted, no help. Pulled the battery, no help. At least I can use the keyboard to the screen!  Thanks for your help.

    Did a restore of the system and all is well! Went back 3 days of the last update of windows. I hope this helps others!

  • Keyboard and the mouse do not work after upgrade to Windows 7.

    The operating system on this computer is Windows 7 Professional (64 bit), and the following updates are available:

    MS Security Essentials:
    Update for Microsoft Security Essentials - 4.7.205.0 (KB2994766) - Important

    Windows 7:
    Cumulative Security Update for Internet Explorer 11 for Windows 7 for systems based on the x 64 (KB3021952) - Important

    Update for Windows 7 security for systems based on the x 64 (KB3004361) - Important

    Update for Windows 7 security for systems based on the x 64 (KB3004375) - Important

    Update for Windows 7 security for systems based on the x 64 (KB3013455) - Important

    Update for Windows 7 security for systems based on the x 64 (KB3023562) - Important

    Update for Windows 7 security for systems based on the x 64 (KB3029944) - Important

    Update for Windows 7 security for systems based on the x 64 (KB3031432) - Important

    Update for Windows 7 for x 64-based systems (KB3004394) - recommended
    Update for Windows 7 for x 64-based systems (KB3020338) - recommended
    Update for Windows 7 for x 64-based systems (KB3021917) - recommended

    X 64-February Windows malicious software removal tool (KB890830) 2015 - Important

    The problems begin after that I installed these updates. After restarting the computer, I can no longer use my (HP SK - 2506 U) keyboard and mouse (Microsoft Wheel Mouse Optical). I have looked around through the forums and tried several suggestions; However, none have them worked, that's why I post here.

    For example, here are the methods that I've tried so far, while using a PS/2 keyboard connected:

    (1) to start the computer in safe mode only to find out that they keyboard and mouse don't always work.

    (2) went in mode Bios and the keyboard works until I leave.

    (3) Microsoft Fix It tool I tried for USB devices and he said that "the changes have been made", but it does not solve the problem.

    (4) I went to the Control Panel, type "Troubleshoot" > find and fix problems > material and audio > configuration of a device, and he says: "material changes may not have been detected."

    (5) download the drivers on their site, but they will not be installed because 'the latest version is already installed. "

    6) going to remove each USB root hub in Device Manager, and then restart the computer to reinstall the drivers. The computer recognizes the 'new' devices,
    but then fails to install. Also, when I check their error on each of the USB status then in Device Manager, I get an error (code 52).

    (7) I also tried to install an update, restart the computer and then install the update next to try to reduce down which one is causing the problem. However, this method does no more work. For example, I installed an update, then restarted the computer, and it would be nice. Then install the next update, and the problem would come back. I would therefore restore to a point earlier, thinking that the second update has been the cause of the problem only discover that the problem came back after first re-installation...

    I also tried to run a backup of my external hard drive, but it does not work. I also tried to create a system repair disc, and it fails too.

    So far, the only way I can "fix" this problem is if I restore my computer to an earlier point in the day and then hide all updates to install automatically.

    Now I'm wondering if anyone knows why these problems are happening or fix them for good?

    Hi Floyd,

    I appreciate the efforts that you have taken to solve the problem in a few important steps. Since it is a problem that occurs when you try to install updates for Windows, the driver may be signed or corrupted.

    Just a few questions in order to get a clear picture of the issue.

    1. make all the windows updates installed successfully?

    2. What is the full error message you see in Device Manager?

    Follow the thread and check them off below if it helps.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-code-52-USB-ports-not-recognizing-connected/2379017c-D513-478C-A184-0d1b7cd408b2?page=1&TM=1424751616733

    I MPORTANT this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows

    http://support.Microsoft.com/kb/322756/

    If the problem is not resolved, you can put the computer in a clean boot and check if it helps.
    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
    How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
    http://support.Microsoft.com/kb/929135
    Note: after the boot minimum troubleshooting steps, see how to reset the computer to start as usual after a clean boot troubleshooting.

    Get back to us if the problem persists.

  • My cat stepped on my laptop keyboard and the screen changed. How can I reverse this?

    My cat stepped on my laptop keyboard and the screen changed. How can I reverse this?

    Press Ctrl & Alt keys and use the arrows to rotate back.
     

    According to the graphics card on your computer, these can be alternatives.
     

    Right click on the desktop | Graphics options | Rotation.
     

    Right click on the desktop | Screen resolution | Orientation.
     
     
     

     

Maybe you are looking for