I use a PC and I used LR3. I'm a newcomer to LR, so patient with me! My problem is related to the import function. I have a photo library on an external hard drive. I slowly imported previews of the photos selected from the library in

Similar Questions

• External HARD drive PX1266E slowly works as USB 1.0 or 1.1

  Hello!

  I have a problem with my external HD PX1266E - 1 25. I have a toshiba laptop Satellite A100 and the hd has worked fine until two or three weeks ago.

  Now when I connect it to the laptop I get the following message "this device could work faster so etc..". I tried to connect the hd to all of my four usb ports, but the message is always the same. I think that it works as a USB 1.0 or 1.1. It's very, very slow. I tried the following steps, but I could not solve the problem.

  1. I uninstalled the usb driver. I rebooted the laptop and reinstalled drivers (automatically). The problem remains.

  2. I replaced the usb cable. I get the same message.

  3. I have connected the PX1266E to another laptop and I still get the same message.

  4. I have connected another external drive (usb 2.0) to my laptop and it works properly at high speed.

  You have some tips to solve my problem?

  Thank you very much. Roberto.

  Hello

  It seems that the problem is you drive HARD PX1266E external and not the book because as you have already said you have connected the HARD drive to another computer and the same problem (message) appeared.

  I think you need to format the external HARD drive and then check if there are positive changes.

  But there may be a hardware malfunction of HARD drive and you can replace it?
  Ask your dealer to HARD drive.

• If I have "Everyone" grant access to an external hard drive, which means that everyone connected to my network?

  I finally understood how to allow those that are related to my network to access my external hard drive, or so I think...

  If I have "Everyone" add to my safety for the external hard drive and I concede that "Everyone" control total, this means that these signed to my correct home network?

  I want to just make sure that the people not connected to my network (which is password protected) cannot access the hard disk.

  Thank you in advanced for your answer!

  Not everyone wants to say exactly that any connection to the drive can access. To restrict access, you must set the account in some way. In a workgroup, there is no definition of the global account for all accounts have access or each user must be explicitly included.

  Even all the computers in a home group have an additional account generated to allow cross access.

• Clean install of windows 7, now I have no permission to copy on external hard drive.

  I have a HP media center 2005 office which originally had XP on it. I bought an upgrade Windows 7 years and installed and never had a problem. Two weeks ago I reformatted my computer to get rid of a redirect virus, and everything seems to work perfectly except for one thing: my C: drive and both of my external hard drives, K:, and M: require administrator privileges to copy/paste/modify anything.
  When I did a clean install it automatically gives me an admin account.

  My question is, what can I do to change the permissions and security settings, while I have a total control over EVERYTHING. I recently tried video file on my external drive and he told me that I needed permissions and click ok to try. But he did nothing.

  I want access to all of my files. Drive C and the two external. I noticed that the security options when I consult my files or directories where showing these accounts:

  SYSTEM
  Josh (Josh-PC\Josh)
  Administrators (Josh-PC\Administrators)
  Everyone

  and I was getting a SID that is long enough

  There are a lot of files, but one in particular that made me on this hunting witch was changing my user profile file in Firefox. I did a clean install and wanted to change the shortcut menu in firefox, but also a few other settings.
  This just happened to reside in C:/documents and settings /

  The recipe is the same as before: take ownership of the problem folder. It make recursive so that you don't need to treat each case separately.

• Bought a new laptop. I want to transfer my Photos with Lightroom to new laptop. I have files of backup on an external hard drive.

  How can I get my old laptop again laptop photos in Lightroom?

  Hi mrwk,

  Please see the link to transfer images from one system to another below.

  http://www.lightroomqueen.com/how-move-Lightroom-to-new-computer/

  How to transfer a Lightroom Catalog and move a photo library to a new computer

  Let us know if that helps.

  Kind regards

  ~ Mohit

• External hard drive and creative cloud

  Okay, so my situation here.  I've been using Lightroom for some time already (the stand-alone version).  I have recently got a new Macbook Pro and have decided to make an Office external hard drive, which will essentially be used only for editing photos and video via Lightroom.  This hard drive will be obviously kept home.  My questions:

  (1) if I am not at home or holiday, can I change the creative cloud photos?  Of course I won't be physically connected hard disk with pictures on them.

  (2) if I'm vacation/far from home and have new photos, it is possible to download these and change them via Lightroom (version Macbook or iPad) and then add them to the external hard drive at a later date?  Some how merge the two catalogs (reception and vacation)?  It would be nice to be able to do alterations Rapids/pics on the iPad and then further edits once at home.  I'm not sure how would load a value of photos to the iPad's SD card and then also the hard drive at home.

  Please help us on this beginner creative cloud.

  Jordan

  Hi there, if you transfer your photos to creative cloud, you can edit files directly from the cloud, or you can select using the Adobe Photoshop Lightroom lightroom web

• How to move the hard drive to external hard drive backup and how to make the backup automatically and regularly

  Original title: EVOLUTION of BACKUP

  I SAVED IT ON THE HARD DRIVE TO PUT IN PLACE TO ENSURE THE GUARD. NOW, I HAVE A LIL BOX IS AN EXTERNAL HARD DRIVE, I GUESS. I GOT IT FOR THE MEMORY, LIKE A BIG THUMB. SAYS ITS NEED F HOW TO BACKUP IT (MY LAPTOP) THIS AUTOMATICALLY AND REGULARLY. HELP PLEASE, THANK YOU?

  Hello

  You can try the following methods and check if it helps.

  Method 1: Change where you back up your files
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-where-you-back-up-your-files

  Method 2: Set up or change automatic backup settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-or-change-automatic-backup-settings

  Reference:
  Back up and restore: frequently asked questions: http://windows.microsoft.com/en-US/windows-vista/Back-up-and-restore-frequently-asked-questions

  Backup your files: http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files
  

• Toshiba 320 GB external HARD drive make my very slow computer

  Hello.

  I bought this product a few weeks ago now, and every time I use it, it makes my computer go tp so slow to the point where I can't actually do something on this subject, due to the fact that everything becomes inadmissible. Also, the rate at which I transfer files to it is also very slow. Any ideas why and what I can do to speed things up a bit?

  Thank you.

  Hello

  You suggested that the laptop becomes slowly during the use of the external HARD drive.
  I guess that transfer you a data from the HARD drive internal to the external USB HDD.
  I think that it s not very rare, that the laptop runs slowly during the transmission of the data.
  It depands on the program that runs in the context of the operating system.

  I put t know which interface you use USB2 or USB only, but data transfer depends on the interface.

• External hard drive will not mount after the update of the Sierra

  Hi, I have an a Segate 1 TB external hard drive that I have with my MacBook Air. After upgrading to Mac OS Sierra, he refused to climb and is therefore invisible in the Finder. Disk utility detects the drive in NTFS initialized and said that all the space has been used. I tried to mount it first through disk utility, but it did nothing. Then I tried via terminal, but he returns "failed to mount. It worked fine before and also works very well on a MacBook Pro running Yosemite. It may be nothing to do with the player, as all files are intact when it is connected to the other Mac. Also, I restarted in Mac utilities and run from there disk utility, and it detected the drive, mounted and fully initialized, with the right amount of space being exhausted.

  I am looking for a solution that does not copy the files off and reformatting if possible, but I'll give it a go, if it comes to that. Thank you very much.

  Most likely your Seagate drivers are not updated.

  NTFS is most likely the culprit here.

  Go to the Seagate site and download and install the latest drivers for your drive and NTFS.

  You can start here... http://knowledge.seagate.com/articles/en_US/FAQ/007770en?language=en_US & key = ka03 A000000tzbeQAA & k = n & wwwlocale = en - us

  Hope this helps, Greg

• Moving iMovie on an external hard drive

  I use iMovie 10.1.1 with my projects, that it takes too much space.  I want to move it to an external hard drive.  What is the best way to do it?  Thanks for your help

  To move items in iMovie on an external drive, create an iMovie new library on this drive and then move the items in this library.

  See this help page: http://help.apple.com/imovie/mac/10.1/#/mov3fa25bae7

  Create a new library

  • Choose file > open library > new.
  • In the Save dialog box appears, type a name for the new library and navigate to the location where you want to save it. The default location is the movies folder in your home folder.
  • Enregistrer.une click New library is created in the location you have chosen, and an empty event with the current date is created.

  Copy or move clips between libraries and storage devices

  • Connect a storage device that contains the library target to your Mac, or copy the library target on your Mac.
  • Choose file > open library, and then choose an option from the submenu. You can choose from libraries recently open, locate an existing library on your Mac, or create a new library. The selected library opens in the list of libraries, with the first selected event and its content is displayed in the browser.
  • In the libraries list, select the event that contains the clips you want to move or copy.
  • In the browser, select the items you want to move or copy. Tip: To select multiple clips in the same library, hold down the command key when you click on the clips that you want to select or drag a marquee around clips.
  • Do one of the following:
    • Move clips between events or libraries: Drag the clips to another event or a library.
    • Copy clips between events or libraries: Option-do drag the clip or clips to another event or library first slipping and then by pressing the Option key when you drag.

  Copy or move events between libraries or storage devices

  • Connect a storage device that contains the library target to your Mac, or copy the library target on your Mac.
  • Choose file > open library, and then choose an option from the submenu. You can choose from libraries recently open, locate an existing library on your Mac, or create a new library. The selected library opens in the list of libraries, with the first selected event and its content is displayed in the browser.
  • In the libraries list, select the event you want to move or copy.
  • Do one of the following:
    • Move events between libraries: Drag the event to another library.
    • Copy events between libraries: Option-do drag the event to another library of everything first slipping and then by pressing the Option key when you drag.

  Copy or move projects between libraries

  • Connect a storage device that contains the library target to your Mac, or copy the library target on your Mac.
  • Choose file > open library, and then choose an option from the submenu. You can choose from libraries recently open, locate an existing library on your Mac, or create a new library
  . The selected library opens in the list of libraries, with the first selected event and its content is displayed in the browser.
• Click the projects button in the toolbar.
• Select the project that you want to move or copy.
• Click on the button to the right of the project name, and then do one of the following:
  • Copy the project to another library: Click on copier copy in the library, then choose a library from the submenu.
  • Move the project to another library: Click on move to the library, then choose a library from the submenu.

• External hard drive USB

  Primarily for backup purposes, I have connected via USB, a new external hard drive to my Compaq Presario (using Windows 7) but I don't see how to access or use. Removal and replacement of the plug USB produce noise sound from the PC that I expect.  Start/computer shows no signs of the element. Start/devices and printers displays an icon for the item, but clicking on it gives no response.   Where should I go from here?

  BrianJoyce wrote:
  

  AHA!   I think you're right about that!   The power, I mean.   It ran OK on laptop from a friend and I tried all the USB ports on my PC but with no joy there.   I think the answer will return for an Exchange or a refund and get a different model.

  I return it for an Exchange/refund and get a USB 2.0 in this case.

  Best regards

  ERICO

• After the upgrade to El Capitan I can't write on the external hard drive to NTFS format more

  I have an external hard drive formatted in NTFS, I used some Mavericks and could read and write on it without problem, after I installed El Capitan today I can't do more, not this external hard drive is read-only. The problem is that it is full of my data and I can't just format as journaled. What I can do and why it worked fine before?

  You need to upgrade or replace the software you used to write on NTFS volumes and should put a copy of your data to a second drive in case one you have fails for any reason unrelated.

  (140448)

• Satellite 2450 (XP) does not recognize my external hard drive

  I recently purchased a Hitachi USB 2.0 external hard drive. When I plug it into my computer (from Toshiba Satellite with Windows XP) it 'Bing' to let me know its been recognized and appears in the options of 'Remove hardware safely', but not in 'my computer '.

  I looked on other sites to help tech & they suggested to go to him & records management assigning a drive letter, but I can't do because it does not appear in disk management. It appears in Device Manager, disk & it says that the camera seems to work fine.

  don't really know what to do! Help!
  Have all the latest windows/microsoft updates/Service packs etc...

  works fine on another PC and we tried to disconnect/reconnect (there is no external power supply required)

  through directly to the laptop via a usb cable

  Any help/advice would be greatly appreciated!

  It's very strange. I use two external hard drives connected to the USB ports and two of them are recognized correctly. I checked it with my old 1900 satellite also.

  I put t really know what can be the problem. The HARD drive is connected with two USB cables (as in my case)?

  Try to remove the USB ports on the Device Manager, restart the device and plug it in again. For me, it is known that HARD drive is not recognized correctly when the HARD drive is removed without using Safely Remove Hardware and reconnected. Also try different USB ports on your device.

  As I understand your unit As USB2.0 ports and I really don t know why this happen. If there is no possibility try to check some other external HARD disk. It will be interesting to know if it's some kind of common problem or individual cases.

• How can I save my backup external hard drive?

  I have a La Cie 4 to external hard drive to back up my MacBook Pro. How do I backup my external hard drive (just in case ceases to work properly or at all)?

  You use this drive as a backup Time Machine?

  You can connect as a second external hard drive and configure Time Machine to use this drive as well. Then Time Machine are displayed alternating hourly between readers. So when one of those falling down, you will have a backup that is more than an hour old.

• My external hard drive missing from my computer

  Hi everyone is smarter than me... which would include about each of you.  ;-)
  I have a Western Digital 1 TB external hard drive connected to my laptop Dell Inspiron 6000 Intel Pentium clocked at 1.86 GHz proc running Windows XP V2002 Pro 32 bit SP3. Until a few days ago the WD is working fine since I bought it about 3 years ago.

  The problem: the drive is listed in the device as Manager works fine but it does not appear in my computer. I reinstalled the WD software and run the diagnosis that came back with a mistake or two test and repair but not yet in MyComp. I searched the entire computer, but the E: drive is not there. I have studied this thing to the end, including the proposed solutions on Microsoft here, but I am against the wall and do not know what else to do.

  Any suggestions?
  Thanks in advance!
  Mike

  Me = SHOUTING, CHEERING, YELLING, CELEBRATING, essentially going nuts!  :-)

  Guess what, y ' All? I found my Western Digital external hard drive!  I'm so excited!  I was not happy that since my children were born.  Laughing out loud.

  AND I OWE IT ALL TO TECH-GEEK! THANK YOU 1 BILLION, JILLION AND GAZILLION, BILLIONS OF TIMES!

  Your post today mentioning external hard drive to your customer and how you had retrieved all the data using http://www.cgsecurity.org/wiki/TestDisk, it's what saved my life! I spent very little time on their site and very little time running of the programme and BING POW ZOOM! My drive is back, fully intact, not a single missing file!  I think it's all because I was able to give the drive a name (you know, L for logic and so forth). Because as soon as I wrote the files on the disk - which literally seconds - restarted, and BINGO! She's back in my computer!

  I can't begin to even formulate words to properly express how I am grateful to you, TG. I am most grateful. Can I make a donation to your charity in your name?

  A BAJILLION THANKS!
  Mike

• I have just connected my Apple G Drive (external drive) to my Laptop Microsoft - EXTERNAL HARD DRIVE - NOT RECOGNIZED. Help? Mapping drives?

  I just plugged my Apple G Drive (external drive) to my Laptop from Microsoft.

  Driving light - ON

  (It works fine on my MacBookAIR)

  EXTERNAL HARD DRIVE on the laptop computer of Microsoft Vista-

  EXTERNAL - UNRECOGNIZED HARD DRIVE.

  Help?

  I tried the drive mapping?

  No drive letter that appears.

  I tried Microsoft DIFFICULTY IT PROGRAM - it does not detect there is a problem - nor did he fix it.

  I need help/help - thanks

  Hello Campbell,

  I would be grateful if you could answer the following question:

  1. what Microsoft Fix It have you tried?

  2. you receive an error code or message?

  3. have you tried to connect another external hard drive?

  Try to use an external hard drive on another USB port or another computer and check.

  I suggest to follow the steps below and we update on the State of the question.

  Method 1:

  Tips for solving problems of USB devices:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2:

  Install the latest Windows updates

  This method will install the latest drivers for your external hard drive USB device.

  a. click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.

  b. click find updates. When the scan finished, click optional review updates.

  c. click on the check box next to the update, and then click install updates.

  d. If you are prompted, read the license agreement, then click I agree.

  e. follow the instructions on the screen to download and install updates.

  f. If you are prompted, restart your computer.

  If your problem still exists, go to method 3.

  Method 3:

  Reinstall the USB controllers.

  This method addresses the steps where the USB driver currently loaded became unstable or corrupted.

  a. click Start, type device in the area Manager Search , and then click Device Manager.

  b. expand Bus USB controllers. Right click on a device, and then click Uninstall. Repeat for each device.

  c. Once complete, restart your computer. Your USB controllers will automatically install.

  For more information:

  Contact the Apple Support:

  http://www.Apple.com/support/contact/

  I hope that the information above helps you.