I use FrostWire and the other asked me to update, so I did and came up with this message, 'FrostWire can damage your computer. You must eject the disk image.

Similar Questions

• D:/autorun.exe is not a valid win32 application he came up with this error when I try to install a program on a disk and it is really buggin me

  It is in these exact words and it's annoying me like crazy can help pleae somone

  Hello

  Thank you for joining Microsoft Community!

  According to the description, it looks like you get the autorun.exe when installing a program on a disk.

  However, we need more information to help you better.

  Please help me answer this question.

  1. is the particular problem with a particular program?

  2. is the specific issue when installing a program on a particular CD?

  3. what program are you trying to install?

  4. What antivirus do you use?

  The probable cause for this error 'not a 32-bit application valid' can have several causes:

  I have listed some of them below.

  The file is corrupted, bad or missing.

  a. If the hard drive is damaged or badly it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.

  b. If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:
  

  a. If you try to run a program that is not designed for your version of Windows, you can get this error.

  b. Although numerous older programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.

  c. If the program is an MS-DOS program more former start program or Windows, you get this error.
  d. If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.
  

  a. this error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.

  (b) if the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program, start the computer in

  Safe mode will ensure that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.

  a. If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.

  b. download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Provide us with more information on the issue to provide a better solution.

• Registry issues, if I deleted the registry stuff can damage my computer?

  Hi everyone, thanks for reading.

  I was wondering if removing stuff from HKEY_LOCAL_MACHINE-> part SOFTWARE in the registry can damage your computer - if it is a software that you have installed. For example google chrome.

  Thanks in advance,
  Joshua

  Who can say what it's going to ruin?  There are things that you can remove which will not really hurt much, there are things that you can delete that will screw up a whole program or software suite, and there are things that you can remove that will transform your computer into a pretty, but pretty useless, brick.  I stick to my previous advice.  Do not.  Just don't.  Unless you do it for a good reason and have a clear idea of what you are doing - just don't.

• Make the disk image using disk utility and the message "Apple_HFS: 0" is displayed

  I'm doing a disk image to try to work on that later. This is an image of a failed disk drive. Some areas can only be read, I know and the process takes a long time because of this, so I'm willing to be patient.

  I get messages in the disk utility window that says "Apple_HFS: 0" and "Creation of image xxxx.dmg.

  The disc has about 700 GB. I started it about 20 hours ago, and the blue bar is about 5% of the way, so not much happened.

  I fear that the message "Apple_HFS: 0" means that the disk image is not made. I am concerned about the part "0". I don't know what that means.

  I don't want to do it for days and days and find that there not to make a disc image all this time.

  I realize that the fact that the external drive is damaged (probably damage) means that this process will take longer than normal. I am willing to leave it for a week so that he can make a disk image. But not more than a week because then it is not worth my time.

  So my question is: does the message ' Apple_HFS: 0 "means something bad, or that the message normally during this procedure?

  Apart from this message and the message "Xxxx.dmg imaging", there is no other message.

  I think I'm making progress because the bar has moved since I started the process. For a long time I couldn't see a bar at all. And today, after spending the night, there is a small bar, as I said, about 5% complete. But it's very slow. It would take at least a week for the disk image to be made. I just want to know if the messages that I see are normal or not.

• whenever I try to use the windows fax and scan, I have this message:

  whenever I try to use windows fax and scan, I have this message: Windows fax and scan cannot access your documents folder. Please, make sure that windows fax and scan can access this folder. How I do that?

  Hi Mohamed

  Thanks for your posting in the Microsoft community

  You can check if you have my documents in C:\Users\ (username) \My documents correct location.
  If the problem persists, you can deactivate and then activate Windows Fax and consolidated expansion of print and Document services from the windows on or off check and option features if this solves the problem.

  You will need to disable the function, and then click OK. Now open Windows Fax and Scanand check. Yet once activate the Windows Fax and Scan and check if you experience the same problem.

  See the link below to display the window for the deactivation and activation windows fax and scan under Print and Document services and check option.
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  OR

  Just find a hidden file called 'fax' at c:\users\rich\Documents\. I have
  delete the file and create a directory named "Fax" to
  c:\users\rich\Documents\ with subfolders called "Drafts", "Inbox", and
  "Personal cover pages. You click Windows Fax and Scan

  It will work

• I bought a Xbox 360 for Windows gamepad, as well as a Play and Charge kit. If I want the charge with this kit controller, can I use a USB/power Apple to the charge controller plug?

  I bought a Xbox 360 for Windows gamepad, as well as a Play and Charge kit. If I want the charge with this kit controller, can I use a USB/power Apple to the charge controller plug?

  Hi Arvin,

  The question you posted would be better suited in the Xbox Forums. I would recommend posting your query in the Xbox Forums.

   

  Welcome to the Xbox support

  http://support.Xbox.com/en-us/

  Hope this information helps.

• 1001 error code in the registry when you try to remove an old program using programs and features in Control Panel. How can I fix?

  1001 error code in the registry when you try to remove an old program using programs and features in Control Panel.  How can I fix?

  Computer Windows 7

  Tried to reinstall the older version, she received error 1001 something again with the registry.   Does not remove old software.

  Hi Carol,

  1. what program or software you are trying to delete?

  2. What is the code or an exact error message?

  Please provide us with more information on the specific question, to find a solution as soon as possible.

  Follow the link below and check them with the question:

  Solve problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

   

  I hope this helps.

• 'Install' is corrupted and cannot be opened. You must eject the disk image.

  Downloaded Photoshop CS5 several times and keep getting this warning: 'Install' is corrupted and cannot be opened. You must eject the disk image. Help!

  When you ask a question you will need to provide some basic information

  -Forum quick start https://forums.adobe.com/docs/DOC-5601

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Using a full account of computer administrator with read/write permission?

  IF El Capitan Mac read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• Hi all, I keep is typed in the password at startup box, in bars in safari and firefox coupled with a stuck key noise that stops when you press a key, I scanned with antivirus that seems clear, can anyone help?

  Hi all, I get a storm of +'s typed in the password at startup box upward, in bars in safari and firefox coupled with a stuck key noise that stops when you press a key, I scanned with antivirus that seems clear, can anyone help?

  Clings in the key on the keyboard? Wired or wireless keyboard?

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

  Reset an Apple Bluetooth mouse or Trackpad wireless keyboard (pairings and other common troubleshooting problems)

  Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

  Reset the NVRAM EXTRA memory

• I get a message that says that it is not backup because the backup of the disk image is already in use

  I get a message that says that it is not backup because the backup of the disk image is already in use

  If you have a Time Capsule...

  Make sure that no other Macs back up when

  Pull the power cord to the back of the time Capsule

  Count to ten

  Reconnect the power cord to the back of the time Capsule

  Wait a few minutes and try a backup

  Report on the results

• My computer is stuck in "configuration updates: stage 3 of 3 0% complete.". Do not turn off your computer. It restarts just over and over again with the same message.

  I have a Dell Inspiron 1525 with Windows Vista, and I have tried the following to fix my endless reboot with the "Configuring updates: stage 3 of 3 0% complete.".  Do not turn off your computer. »

  • I inserted the cd 'Réinstallation DVD Windows Vista', but it won't pop up any kind of prompt for me to do something with it.  I tried putting the cd in what was on the computer and tried leaving him in and restart it - but the cd has no EFFECT.
  • I used the F8 key and I tried the following with no luck: safe mode, safe mode with network, safe mode w / command prompt, enable logging, last known good configuration (Advanced) boot and debug mode.  Most of these options make the monitor off (to make you think he will do something), then it just restarts and did the thing reboot loop again and again.
  • I also tried the repair your computer option to the F8 key.  He asks me to log in as an administrator (but my password does not work).  So, I use the menu drop down and choose the name of my computer and then use my password, and I can connect to "restoration of access options '.  Once I'm in the "System Recovery Options".  I tried the following with no luck: Startup Repair tool, restore the system, Windows complete PC Restore, Windows Memory Diagnostic tool and command prompt.  THE only ONE that I HAVE NOT YET TRIED it IS THE "DELL FACTORY IMAGE RESTORE", it's because I want to try to fix it without losing everything on my hard drive.  Here are the details of the I've tried in the "System Recovery Options".
  • The command prompt says: 32 X:\Windows\system > (I have no idea how to use it, but it's what he says)
  • The memory diagnostic tool reboots the computer, but nothing new happening (just reboot over and over again)
  • In the PC restore full Windows: I tried to put the Windows Vista CD in, but it can not find a valid backup location
  • When I click on the system restore: it is said: "no restore points were created on your computer's system disk.  To create a restore open system protection point.  When I click on the system protection, it is said: "your computer is running in a limited diagnostic State.  If you use the system restore in this limited State, you can't undo the restore operation.  Help topics are not available in this State. "  So I press OK, and I'm back to square one.
  • When I click on startup repair: it says "Startup Repair could not detect a problem.
  • I know there are many many posts on this problem, and I think I've tried all the suggestions on how to solve the problem, but they do not work for me.
  • PLEASE HELP ME!  I need my computer for my college work.  I can't borrow laptop my friend forever!

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• "installation is damaged and cannot be opened, you must eject the disk image".

  After you download the master creative suite 5 and then try to install the load down, I got this message and could not install the load downwards;

  "installation is damaged and cannot be opened, you must eject the disk image".

  What does that mean?

  IF El Capitan Mac read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• After downloading CS5 and clicking on install, I get the message that the disk image is damaged and I should egect the Image

  I downloaded CS5 on the site was given to me by Adobe. When I click the button install, a message pops up "The Disk Image is damaged and cannot be installed, eject the disc" what should I do?

  IF El Capitan Mac read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -IF not, Details of the message from the error messages and a person may be able to help

  Maybe it's a fake because of Mac El Capitan and OLD programs error

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but here are some links that CAN help with old programs

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• Mac error: 'install' is corrupted and cannot be opened. You must eject the disk image.

  I'm on a MacBook Pro and after I dl the Suite CS5 Design Standard is what I get: " 'Install' is corrupted and cannot be opened. You must eject the disk image. ". I rebooted my laptop several times and retried several download but it's the same message. What can I do if I can install this new product?

  IF El Capitan Mac read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -IF not, Details of the message from the error messages and a person may be able to help (just not Adobe)

  Maybe it's a fake because of Mac El Capitan and OLD programs error

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but here are some links that CAN help with old programs

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• Hi guys. on the macbook in System Preferences > sharing there is a box at the top that says "computers on your local network can access your computer at:" means that other people can access my computer?

  Hi guys. on the macbook in system preferences > sharing there is a box at the top that says "computers on your local network can access your computer at:" means that other people can access my computer?

  "Your local network" is the computers that are on the same router as you. At home, this is your family.

  to: "computer name" is the name of the computer, they will see.

  Access is provided for items you decide to activate, usually file sharing. For sharing of files, ONLY the items that you specify in the file sharing dialog box details panel is accessible and be only users you EXPLICITLY list by username.