I use OE 6.0. I get this error 0x800CCC6D when I try and send any message with an attachment (small, only 27kb). I can send messages without attachments without problem. Cox said he is not on their end. Any ideas? ____

Similar Questions

• I get this error 0xc0070652 when you try to install a software

  I get this error 0xc0070652 when you try to install a software, said a facility is underway and should be completed before the new installation is allowed. There is no other facility that I can tell, there may be a stuck somewhere. Please help, thanks in advance...

  You can check the registry key below all pending installs.

  Check the following registry key and clean all entries in the key, you will find:

  Go to the ORB start, type regedit and select access.
  If you receive the user account control dialog box that says, you want the following program to make changes to the computer?, click Yes.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Highlight: HKEY_LOCAL_MACHINE \Software\Microsoft\Windows\CurrentVersion\Installer\InProgress

  Check the following registry key and clean all entries in the key, you will find:

  HKEY_LOCAL_MACHINE \System\CurrentControlSet\Control\Session Manager\PendingFileRenameOperations

  Thank you

  Marilyn

• I get this error code when I try to uninstall it and install Adobe Reader. error1324

  I get this error code when I try to uninstall it and install Adobe Reader. error1324

  See if the Fixit program mentioned in this link he can solve it for you.  It will fix bad enties in your registry for "Shell folders".

  You receive an "Error 1606" error message when you try to install or remove a program from Microsoft
  http://support.Microsoft.com/kb/886549

  Try the Forum of Adobe Reader and the 1324 error type in their search box.
  http://forums.Adobe.com/community/adobe_reader_forums

  http://helpx.Adobe.com/Acrobat/KB/quick-fix-install-download-reader.html

• I get this error ssl_error_rx_malformed_alert when you try to load a Web page

  I was living a pop up by "salus" and trying to get rid of him, I reinstalled Firefox. Since then, I'm unable to open Web pages. Only, I get the above error. I found out a way around it's first open CCleaner and click the button "online help", by doing this, I can access most other Web pages I want to open such as facebook and hotmail and moxilla support. If I close the CCleaner and try to open Firefox, I get the same error ssl.

  Make a check of malware with several malware scanning of programs on the Windows computer.
  Please scan with all programs, because each program detects a different malicious program.
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
  • https://support.Mozilla.org/KB/troubleshoot-Firefox-issues-caused-malware

• Why do I get an error msg when I try t send a msg via windows live

  When I try to years has add on craigslist, I get a msg that mail has failed?

  View all Windows Live questions in the appropriate forum:
  http://windowslivehelp.com/

• I get this error 0x800703EE when you try to see if I need the updates for my computer.

  I have Windows XP Service pack 3, other software installed... Windows Defender, security of Shaw.  I don't remember when the last time that I was able to download the updates.

  caknowles,

  0x800703EE ERROR_FILE_INVALID system could not allocate required space in a registry log;

  the volume of a file has changed on the outside so that the opened file is no longer valid.

  How to get the latest version of windows update [v7.4.7600.226] agent to help manage updates on a computer:http://support.microsoft.com/kb/949104/

  I don't know that someone else will help you if this suggestion does not help.

• 0x945002D, I get this error code when I try to record a movie, help please. The error occurs when it gets to a certain part of the video

  I have a section of the video and when the recording function gets to it, he stops and says I have to remove it, it is saved as .wmv. I try to record on DVD and/or video high definition, but always stop at this one video clip. Help please.

  Just a thought...

  The. Clip WMV in question may be corrupted in some
  as well as Windows Live Movie Maker problems
  This encoding.

  Sometimes import a. Clip WMV in a conversion
  program and convert it to WMV will clear up the question.

  I know it may sound redundant but the conversion process
  creates a new version of the. WMV file that would work
  best in Movie Maker.

  If the. WMV file has previously been converted to another
  format... it may be best to start with the original for file
  This conversion. WMV.

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup290.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag > FFSetup290.exe< out="" of="" the="">
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• Get the error: 0xc00d11d1 when you try to play any media in Windows 8

  I get a problem with 0xc00d11d1.  Tells me I do not have the appropriate, drivers but don't tell me where to get them (or what they are).  Cannot run the media on Windows Media Player, Zune or the built-in app I bought from (video xbox).  Cannot run on an outsourced as Winamp or VLC Player.  Very disappointing to spend money on a product and then hours trying to get the product to work.

  So I found the solution to my problem - not sure whether it will help you.

  1. I had a displaylink driver (look at the programs to see if you have a), which has been the cause

  2 update the driver with one here: http://www.displaylink.com/support/sla.php?fileid=88

  I hope it helps someone.

• If I try and open an email with an attachment I get an error message: this file does not have a program associated with it for performing this action.

  If I try and open an email with an attachment I get an error message: this file does not have a program associated with it for performing this action. create an association in the folders option control panel.  Once there, I don't know where to go

  What is the attachment file extension? If you know what program should open with, just do the following.
   
  1. download and save the attachment to the office.
  2. right click on the saved file.
  3. Select: Open with on the shortcut menu.
  4. click on: choose [default] program.
  5. Select: The appropriate program.
  6. check: always use the selected program to open this type of file.
  7. click on OK.
   
  This should allow you to open these attachments directly from email address now.

• get this error code when I use windows backup or set a date to restore 0x8007007B

  get the error 0x8007007B when I try to set the resrore or back up files is because I have given dell safe? Inspiron windows 7 64 bit

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You can't use the backup and restore feature of Windows 7 and get error 0x8007007B.

  This can happen due to antivirus programs.

  I suggest you follow the steps mentioned below:

  Method 1:

  a. right-click on computer and choose Properties.

  b. click on the System Protection.

  c. in the list of available drives, see if you have a partition into two (2 times the same partition), one with the missing Word or missing.

  d. If Yes, uncheck this missing partition.

  Method 2: Turn off the antivirus

  See the site:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-in/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Unable to get Windows Mail to send or receive. Get this message error code when you try to send: account: "Windows Mail".

  original title: Windows Mail

  Unable to get windows mail to send or receive.  Get this message error code when you try to send:

  Account: 'Windows Mail', server: 'pop.emailsrvr.com', Protocol: POP3, server response: '.', Port: 110, secure (SSL): no, error number: 0x800CCC18
  0x800cc0E error code received when you configure the ACCT.     POP3 and SMTP servers are: pop3.email.msn.com.  SMTP.email.msn.com.
  To find these server addresses, took some time to locate.  After locating and entering, using authentication
  sign username and password, he kept sign asking repeatedly.
  Any help on these questions would be appreciated.

  POP3 and SMTP servers are: pop3.email.msn.com.  SMTP.email.msn.com.

  To find these server addresses, took some time to locate.

  POP3/SMTP settings for an MSN e-mail account are on this page. That's more than three years, Hotmail includes the MSN e-mail accounts.

  Hotmail has its own support at the Windows Live Solution Centerforums. Please address any other question you may have on one of the forums on the right side of this page.

  Noel

• I can't save Acrobat 8 standard after a hard drive failure and keep getting an error every time I try and use it. Y at - it something I can do.

  I can't save Acrobat 8 standard after a hard drive failure and keep getting an error every time I try and use it. Is that what I can do to get rid of the message. The message reads "a problem has been experienced while trying to send information on the internet.

  Hi philh76405255,

  I'm sorry for the inconvenience caused.

  Please refer to the following solution: -.

  (1) find the file acrobat.exe on your computer. Right-click on the program and click "troubleshoot compatibility". Set the compatibility of the operating system installed on your computer.

  (2) if it asks you to register several times, please refer to this doc. KB: easier to register several times. Acrobat 8 | Windows

  That might solve your problem.

  In case if you have still any question, please let us know. We will be more than happy to help you.

  Kind regards

  Nicos

• I get an error 80070643 when you try to do an update. __

  I get an error 80070643 when you try to do an update. Using Windows 7 Pro. The updates seem to be security patches. Any ideas?

  Hello

  Windows Update error 80070643 can happen for several reasons. The most common cause is a problem with the .NET Framework is installed on the computer. You can also encounter this error when installing updates for Microsoft Office 2003. If you were installing Microsoft Office 2003 updates when you received the error, follow the instructions in the "Microsoft Office 2003" section below. Otherwise, follow the instructions in the "Windows.NET Framework" section in the article below:
  Windows Update error 80070643
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643

  Also see the article below:
  You receive the error 0 x 643, error code 0 x 80070643 or updates may be offered again when you try to install the .NET Framework updates when you use Windows Update or Microsoft Updates
  http://support.Microsoft.com/kb/976982

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• get 80071AA7 error code when you try to install windows vista sp1

  get 80071AA7 error code when you try to install windows vista sp1

  80071AA7 ERROR_FILE_IDENTITY_NOT_PERSISTENT
  The file could not be opened from a transactional point of view, because its identity depends on the result of a unresolved transaction.

  (1) If you have the Vista installation DVD making an 'upgrade on the spot"(aka repair facility)
  How to perform a repair for Vista Installation

  All personal data will be kept. All updates applied previously will need to be reinstalled.

  (2) do a clean reinstall of Vista. All the personal data will NOT be preserved.

  3) click this link to launch a request for assistance from Microsoft by Chat or email: Windows Vista Service Pack 1

• I get Windows Live Mail error ID: 0x800CCC6E when I try and send an email to a group of 100 or more. How can I fix it?

  I get Windows Live Mail error ID: 0x800CCC6E when I try and send an email to a group of 100 or more. How can I fix it?

  Hello

  When you use Windows live mail and the question you have posted is related to Windows Live, so it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

  Windows Live Mail Forum

  http://www.windowslivehelp.com/forums.aspx?ProductID=15