I use the ethernet

Similar Questions

• Dynadock U3.0 - cannot use the Ethernet port after update 8.1 Win

  Hello world

  I use a u3.0 dock Dynadock with my Vaio PCS 13.
  I'm not able to use the Ethernet port on the Dynadock since I updated my Windows 8.1 device update 1.
  Before that everything worked well.

  I'm not able to re-install the drivers correctly (tried 7.6m0, 7.5m2). While the game driver tries to start, I get an error message, Setup is not able to put a bunch of registry (SYSTEM\CurrentControlSet\Services\DisplayLinkGA\D evice1) keys (up to 0). (Image 1)

  If I ignore these messages and do not install the driver, the Ethernet port will not installed in Device Manager. (Image 2)

  If I try to install the driver manually (DisplayLink network adapter NCM), I'll get an error message that a driver has been found but that access has been denied. (Image 3)
  I started the safe mode and could install the driver. But if I reboot in normal mode, the machine could not be started.

  I also tried to disable UAC and I am logged on as administrator 'real '.

  Please find the attached messaged (in German) error:

  [picture 1]: http://picload.org/image/lcalwop/toshiba.png
  [Picture 2]: http://picload.org/image/lcalwoc/toshiba2.png
  [Picture 3]: http://picload.org/image/lcalwlg/toshiba3.png

  BTW: If I unzip the Installer (7.6m0) and install * inf for the good Fri & dev (4503) it still does not work...

  I put t know what to do anymore...

  Hello

  After upgrade to 8.1 Windows, you should also update the software/driver Display Link
  This is very important!

  The latest version of the driver can be downloaded here:
  http://www.DisplayLink.com/support/downloads.php

  Note: the old version must be removed!

• How can I load updates from pilot to another pc using the ethernet cable?

  How can I load updates from pilot to another pc using the ethernet cable?

  You would be better to use a flashdrive rather than an Ethernet cable. To connect using an Ethernet cable you need a crossover cable and then configure the network cards.

  I hope this helps.

• Use the ethernet port to connect a pc

  Hello

  I intend to use my raspberry pi to do some projects, but is not close to the router (needs thought Ethernet connection - and before anyone asks I'm not able to use a wifi dongle to connect because of the requirements of the project size wise), but near my officejet 6700, can I use the Ethernet port on the printer to connect my raspberry pi to the network from that the printer is connected. I have to play with settings?

  Can anyone help

  Thanks in advance

  Martin

  No you can not use the Ethernet port on the printer.  It is only to connect the printer to a wired network.

• Can workstation make me use the ethernet port on the remote computer?

  Ideal solution would be:

  I have specialized software on my computer I want to use without installing it on the remote computer.

  For now, I have to because the software uses the ethernet computer port to do a job, the software is used to.
  

  
  

  (1) is there a solution out there for everything just to connect to a remote computer and make use of its ethernet port remotely?
  

  
  

  Someone told me that VMWare Workstation last night. Maybe it's completely off-base.

  
  

  If this remote computer is connected to another computer via an Ethernet cable, but not for the internet, only data.

  For me to be able to connect to it, the remote computer must maintain a simultaneous Wifi connection as well.
  

  I use Teamviewer to fight against it.

  
  

  (2) if 1) above is not possible, I'm back to my current setup which is to the software me, I need on that remote computer. But my problem is that it does not seem possible to have WiFi and Ethernet connections at the same time.

  Please correct me / explain how if I'm wrong.

  How can be useful to me in these scenarios Workstation?

  Thanks in advance for your help. I'm looking everywhere for more than a week.

  I read that you wrote in your OP several times and no offense not expected however it is not well presented and I find I have to ask the many requests for clarification, however, I will say this...  A Virtual Machine is presented only a wired Ethernet adapter no matter how the host connects to the LAN/WAN and if you need to wired Ethernet and WiFi Ethernet in the Virtual Machine, and then in addition to the default wired Ethernet you can also provide your own card Ethernet Wi - Fi USB to connect to the virtual machine as well as the two available to the virtual machine at the same time.

  Others while I won't waste time asking a bunch of questions and if you want to take an another stab as describing in explicit and specific in detail what you have and are trying to accomplish, then I add more to the discussion.

• Problem connecting Xbox using the ethernet cable.

  Original title: xbox

  My ethernet cable is pluged in my xbox and my router but itd read do not and it says its offline

  Hello

  Thanks for posting your question in the Microsoft Community Forums.

  According the information, you are facing problems to connect with Xbox using the connection Ethernet.

  If the problem is only related to the Xbox connection problem, you receive contact Xbox support for help.

  For more information, see the Xbox support article:

  Connect your Xbox to Xbox LIVE by using a wired connection

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Using the Ethernet Port on a remote Express

  I have just moved into a new House and has Verizon FiOS installed.  Verizon provided a router modem combination like my main wireless service.

  I have an IP phone that I need to use in my office located in another room and the Verizon tech said that it would be very expensive to run a separate line in this room.

  I have a generation current Airport Express.  I would like to use the Express to join/expand the wireless network in the office, but my question is, the LAN on the Express port will be active so that I can connect the IP phone to the LAN port and use the phone via wireless Express?

  If possible, can you give us some guidance on how to configure the Express?

  Thank you

  David

  I would use the Express to join the network wireless Office

  The AirPort Express, expected to be able to 'join' the wireless network that is provided by the modem/FIOS router, assuming that the device uses wireless standard... parameters and... He Express is located where it can receive a strong signal of the FIOS router/modem wireless.

  But, the Express can not "extend" or "repetition" of the FIOS wireless network, given that "expand" function requires the Express receive a wireless signal from another Apple wireless router.

  .. .my question is, the LAN on the Express port will be active so that I can connect the IP phone to the LAN port and use the phone via wireless Express?

  Yes.  In fact, you can use the LAN or WAN port, or both at the same time... because both ports behave as LAN ports when the AirPort Express "joins" a wireless network.

  can you give us some guidance on how to configure the Express?

  What camera... Mac, PC, iPhone / iPad... will you use for this?  What operating system is that it uses?

• How to extend the network and using the Ethernet port to connect an older computer without wifi capability

  I have a wireless network with my Time Capsule, but also I have an old computer without wifi capability. Is it possible to share the connection to this computer that connects an airport express (model A1264) to extend it and the computer thought that the ethernet port on the Airport express?

  Thank you.

  Yes

• my computer will connect to the internet normally using the ethernet connection.

  my computer will normally connect to the internet via the ethernet connection.

  However when I try to connect by wireless only Skype will work. Explorer or firefox can not connect.
  can someone help please.

  Hello

  From your problem description, I understand that you are not able to connect wirelessly. Please let me know if you do not experience this problem.

  I suggest you try the steps from the following link:

  Solve problems, find wireless networks
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Also refer to links: Wireless and wired network problems
  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.

• Using the EtherNet/IP for industrial Communication driver

  I downloaded this driver EtherNet/IP for industrial work with Allen Bradley PLC Communication. It works fine except one thing. I don't see a way to approach a long data type. Does anyone do this? I tried a lot of different things and had no luck. I added a comment on the bottem of the page to download as well.

  http://decibel.NI.com/content/docs/doc-4065

  Since it is a NI Labs product, you should probably post the question on the Support page of the industrial EtherNet/IP protocol.  Developers and users of the pilot are looking at this page for support purposes.

• chromebook rj11 can use the ethernet

  I think of buying a RJ11 Chromebook. Would I be able to connect to Ethernet?

  No, because it is not a method of using other drivers what Google offers you cannot easily connect a device such as a USB ethernet.

• No internet when you use the Ethernet on WRT54G port

  Router worked OK in hours, but in / op later that day. Ethernet light works when it is plugged in it, but not of the internet on the desktop computer. Get free WiFi on laptop. Unplugged Ethernet port to #2 and can get internet. The parameters seem to be the same, but I'm not an expert, so who knows what happened. Tried rebooting, turning all power off and went to brouser 192.168.1.1 page to see if something has changed. Also, the USB connected to my Tivo shows a signal but is more connected to the network. Any ideas? I have Windows XP. Also I have updated drivers WRT54G after that was the problem.

  The computer has an active PPPoE connection. Connect directly to the internet without going through the WRT via ethernet or because connection that your modem has a USB port added through which your computer connects to the internet, effectively blocking any other connection.

  You must cancel the PPPoE connection. Select "Internet Options" in the control panel. Tab connections make sure you select "do not establish connection" (below the list of configured connections). OK the change. Then, disconnect your connection PPPoE ("Centurynet") in the network connections Panel.

  After you have disconnected the PPPoE connection, you should be able to connect again to http://192.168.1.1/. Your router must also be able to connect with PPPoE now. Check on the status page. If necessary, press Connect. It should if you have correctly configured your router to your PPPoE connection.

• Can I use the lan Ethernet port on the airport express to the release of music?

  Can I use the Ethernet connections on airport express at the exit of music over wifi to a set of speakers? I would use an Ethernet connector at one end a DIN 5 pin to a pair of speakers beolab 2500/2300. I don't want to use the PIN audio output on the Airport express, as it is analog. Possible music out through one of the Ethernet connections at the back of the Airport express? Thank you

  Can I use the Ethernet connections on airport express at the exit of music over wifi to a set of speakers?

  Sorry, but no.

  I don't want to use the PIN audio output on the Airport express, as it is analog

  Perhaps you weren't aware that audio port on the AirPort Express audio book Terminal analog or digital, according to the type of connector used. See this link on the AirPort Express specifications to confirm... http://www.Apple.com/Airport-Express/specs/

  In other words, for the Express deliver audio analog, connect a standard stereo mini plug with connectors appropriate to the other end.  To ensure that the Express deliver audio digital, plug a mini Toslink cable to the audio port on Terminal AirPort Express.  An example is in this link... Airport Express Toslink - Amazon.com

• How to transfer and share files using the cable ethernet on hp probook 4540

  Please using the ethernet cable I connect two laptops with windows OS 8, but can not set up to share files and folders. Please help me, it keeps bombarding me with animals of the AUTHORIZATION.

  Hello Abekah,

  I understand that you need assistance, sharing of files between computers.

  Here is a link to a video that will guide you through the steps.

  I would like to know how everything goes.

• [SRP527w] Use the 4 Ethernet Port as a WAN Port?

  English:

  Hello world

  I just can't understand how to use the ethernet port 4 as a WAN port.

  I think it's possible because it labeled LAN/WAN at the rear of the unit... If someone can, please let me know how!

  Thank you for your help,

  Gaultier.

  English:

  Hi all

  I can't configure the 4 en world WAN ethernet port.

  It seems to me that this is possible since the port is called LAN/WAN on the device... If someone did it, thanks for that comment!

  Thank you for your help,

  Gaultier.

  Hi Gauliter,

  Please use the Administration > menu of switch setting.  Set the option Interface DSL for disable use 4 Port LAN instead of the ADSL interface.

  Note, this setting will factory reset the router and completely disable this ADSL interface.

  

  I hope this helps.

  Andy