I use XP Pro, after the installation of the SP3 I lost all audio monitor
except the occasional beep in my internal speaker, I can also install windows or framework updates...? What gives things have been well before SP3
Do you have all the preparatory steps before the try to install SP3? If this isn't the case, please do.
Blog of Microsoft MVP Windows XP SP3 - read all the prerequisites for a successful installation - Harry Waldron-
Steps to take before you install Windows XP Service Pack 3
In addition, there is a forum dedicated to the Win XP SP3:
Forums TechNet - Windows XP Service Pack 3 (SP3) MowGreen Services consumer safety update
Tags: Windows
Similar Questions
-
After the installation of El Capitan, I lost all audio, I have no input or output
I tried to reset the computer with no luck. I have a microphone at the entrance, I see the meeter but no audio output and no input line
Try this:
Start the computer in Safe Mode, and then restart normally. It will be slower than a normal startup.
MacIntel: Reset of the controller (SMC) system management
Reset the PRAM and NVRAM on your Mac.
Repair the hard drive and permissions - El Capitan
HD recovery start:
Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.
Repair
When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left. Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.
Now, download and reinstall OS X El Capitan 10.11.3 Combo Update.
-
Cannot use windows update after the new installation of xp sp2
Cannot use windows update after the new installation of xp sp2
How to reset the Windows Update settings?
http://support.Microsoft.com/kb/971058Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
-
Ive been using Premiere Pro, After Effects and Photoshop for a while now with creative cloud, but since I've updated the 2015 After effects version, it is said that it is a trail version? But when I go on the creative menu cloud and look at apps it just said up to date, any ideas on this?
Hello Cam,
Please check the help below document:
Applications creative Cloud back in test mode after an update until 2015 for CC
Kind regards
Sheena
-
Cannot update Windows XP Pro after the reinstallation of the Message, the website has encountered a problem and cannot display the page you are trying to view. The error number is 0x8024400A.
Should I turn off my Anti virus software is what could be stopping my updates? some sites would sugest that I use Kaspersky 2012, if that's the case, then why do all my other programs that are installed to date OK?
Hello
Check your level of service current pack...
- Hold down the Windows (between Ctrl and Alt) key and press Pause break
- Examine what is listed in the system: section
If there is no service pack designated first level you must download SP2 from...
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28
.. .and then run the downloaded program to install SP2.
Once you have done this, or if you were already in service pack 1, 1a or 2, then install SP3 by downloading and running from...
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24
For both of the above, you can ignore the text that says it's for network installations and also ignore the text advising windows/microsoft update if a single update of a PC.
So try and get up-to-date with the Windows updates.
Tricky
-
Hi, I have 0xc0000142 error when I start the first pro after the last update, before that I had no problem playing first pro...!
Hello Gene,
You may need to check this: Re: Premiere Pro 2015 won't open after the recent update
Kind regards
Navdeep Pandey
-
I just downloaded Acrobat Pro after the trial and now I can't open any files...
I just downloaded Acrobat Pro after the trial and now I can't open any files, when I click on the icon I get this message: the last time you've opened Acrobat, he unexpectedly while the reopening of windows. You want to try to reopen his window again? If you choose not to reopen Windows, you may need to open and position the window. There are 2 options: not to reopen or Reopen either choice leads to a window that appears upend says please wait while we are launching Acrobat and then window closes just quickly.
I was able to successfully uninstall and reinstall to fix the problem. Thanks for your help Tariq. Excellent help and a quick response from you corrected my problem within minutes.
Ward
-
After the update, I lost a large number of documents that I had edited and saved in my tablet. No possibility to recover them? Now I can access only the documents of the cloud.
I found an easier way to recover the files: I connected the tablet to the computer and then open the download-> Adobe Reader folder. There, I found all my files.
After this boring experience, any recommended rather than Acrobat Reader PDF player?
-
Satellite Pro U400-12y: how to use HDD recovery after the new installation of the OS
Dear Sir
I have the Satellite Pro U400-12y and give tem my friend use it when he gets back, the laptops it do format c: and reinstalled new windows.
I try to do the recovery only by pressing f8 without answering.How can I recover my laptop to its state of origin as drive HARD recovery again in d:
Thanks in advHello
You will not be able to restore the factory settings because another operating system has been installed on the first partition.
Usually by pressing F8 immediately after the laptop has been powered should allow the advanced on-screen menu. Here, you should choose option called repair my computer and Toshiba Recovery HARD drive.But if this doesn t work then you will not be able to use HARD drive recovery.
In this case, you will need to order the new CD from here:https://backupmedia.Toshiba.EU/landing.aspx
Good bye
-
In the meantime media in Premiere Pro after the use of Speedgrade
I recently finished color grading a sequence that I imported from Premiere pro using directlink. Everything went well in Speedgrade - I asked a LUT Cinestyle all my clips and made a few corrections using primary and secondary layers.
After that, I have opened the sequence first and all the clips that have been classified as being waiting for media. If I turn off the Lumetri effect, media Meanwhile disappears and the images (classified) reappears and plays without problem. I cannot export something due "unknown compilation error.
I use the latest versions of both programs and you encounter the same problem on Mac and PC.
I've never had a problem with Speedgrade before like this. Someone else has a similar problem?
I just solved this problem myself after a lot of headaches and a missed deadline. By my experiences, all used by SG lut must be copied in the folder of LUTs for first for a direct link to the first to work properly. On Windows, it's Program Files-> Adobe-> Adobe first Pro CC 2014-> Lumetri-> LUTs
-Mark
-
Satellite 2450-201: cannot use TV option after the new installation of the OS
Hello
I have a laptop toshiba satellite 2450-201.
I've always had the TV OUT works well with my TV, use the right cable SVIDEO.
I was able to watch divx movies in my TV using my computer.I had to format the laptop and installed windows XP again.
After that, I can't use more TV-OUT option, so that the image of the laptop could be seen on television, I've always had.
After that I updated display drivers, but the problem remains.Can someone help me?
Thank youHello
How do you reinstall the operating system? Have you used the recovery CD?
Usually after the reinstallation of the operating system from the recovery CD, everything should work properly.
It is important that you can switch to the TV. In this case, you can use FN + F5.
If it's not working so I guess that for display devices hotkey utility works or was not installed. Well, the alternative is to pass on the TV via the graphic properties. The TV option, you should find somewhere in the advanced options.However, check it and check if you have installed all the drivers.
-
Satellite A660: Can I use HDD recovery after the C formattg
My A660 comes with windows 7.
I intend to install Win 7 Pro.
I was wondering if I format the C drive leaving 2 partitions (restore) system I'll still be able to use miladi autimatic restoration? - or the start setting will get too erased after the format of C:.According to me, the info partionds and start-up of recovery are all in the system folder and I will not format that?
Thank you guys
Hello
As I know, that you won't be able to use HARD drive recovery option after installing other Windows operating systems
HARD drive recovery would be only available with Toshiba preinstalled image.
The new facility would change the master boot record and boot model will be modified. I guess the recovery of HARD drive option is not available in the menu new.
So create a disk recovery first before you install any other OS! -
Can I still use Windows XP after the end of support?
I've always found XP easier to use and more effective than the two 7 and Vista and for this reason I have currently no intend to update, even after the end of support. However, to make sure it works please.
You can still use it but less and less software will be written for it, also there is no update, and if you have a microsoft problem will not be able to help you.
-
Unable to activate Windows 7 Pro after the upgrade of the system
Old Config: Celeron / 2 GB / 40 GB. -Win7Pro retail trade / retail Office10H & B
New Config: i3 / 2GB / 500GB. -Win7Pro retail trade / retail Office10H & B
Windows worked perfect (but slow). I have updated the comp & installed fresh from the same media. Old hard drive is formatted. Office activated. but windows gives the error "the product key you entered cannot be used to activate windows on this computer". I tried the online activation & the phone activation. for only informed 10 days for activation. Help, please.
Try the phone activation once again:
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-usIf this does not work, try direct telephone activation:
Direct activation number: (888) 725-1047
1-800-936-5700
If the copy of Windows 7 that you installed an upgrade, please note the following:
However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.
15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.
So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.
-
How use Bridge to rename the batch to remove all characters after the 32nd character?
I would like to batch rename to remove all characters after the 32nd character. Is this possible?
Substitution string use with use of regular expressions is selected.
In the use of the search field
^(.{32})(.*)
In the field using replace
$1
Maybe you are looking for
-
Sierra and Photos: unable to load library of pictures located on a NAS
I have a 300 GB photo library located on a NAS. No problem with El Capitan and Yosemite. With Sierra when I opened the Photos I had a spinning wheel and even after a night full, nothing happened (Finally, the NAS disconnected... but I think it's some
-
After installation clean on a new processor, preview before print still crashes FF
Print Preview worked fine on the old computer, but on the new, he always causes Firefox to crash. This happens if I use the 'Print Preview' command separate from the drop file, or use the button print in the toolbar that opens automatically in the pr
-
I ask computer to print & it does'nt printing, printer checked & he said his loan & connected
I wanted to know if its because I installed a 1 TB external hard drive
-
I created a web application bb factory using the web works for Visual Studio plugin. I tried to install the application and got the error cannot access the api blocked. I researched and found that the fact of not having signed app can cause this erro
-
Install signed without App World App?
Is it possible or that it will be possible to install an application signed without App World on a device over the air (OTA). Goal is to be able to send a version of the application that can get our servers, as we do now on handheld devices of beta-t