I've just updated for Firefox 6.0.2 and now two fingers to scroll on my touchpad does not work.

Similar Questions

• I've just updated for Firefox 6.0.2 and it freezes again intermitantly. It lasts 30 to 60 seconds. Before the update, it froze intermitantly for more than 60 seconds. Help me unlock firefox!

  Firefox will crash and say don't ANSWER DO NOT randomly. It happened when I updated to 6. I don't want to break into my system to make it work when Firefox 5 and less worked well.

  change fix found! You can downgrade, but it is recommended that you switch to Firefox 3.6, which is still supported, while Firefox 5 and 6 are not.

  • See install an older version of Firefox

  Any problem is quite likely to be plugins or add-ons that you use instead of Firefox itself. These problems are often very specific to installation and combinations of extensions of the software used, so if you have not a problem with Firefox does not it may help to start your own thread with all the details of your own configuration.

  If you receive a message saying it does not then probably nothing crashes actually.

  If you are not an accident, it could be (in order of severity)

  • your OS: Windows that blocks,.
  • the browser Firefox itself,
  • or the execution of a process of Firefox as a plugin container.

  Firefox itself is generally quite stable and responsive. (You seem to use a 64-bit computer, if problems are unlikely to relate to the machine doesn't meet does not Firefox minimum specifications)

  First try in Firefox to solve the issues in firefox Safe Mode , but not to make changes when you get the checklist simply click on continue. Then, if that fails to help, try disabling or uninstalling plugins and themes. See troubleshooting questions with plugins like Flash or Java to solve common Firefox problems.

  If all else fails fold on the guide

  • Troubleshoot and diagnose problems of Firefox < - blue clickable link -

  Update
  possible cause and solution

• Healthcare avordable MNSURE site is optimized for Firefox 24, how do I download it as my download on 12/18 does not work for my application?

  I am fill in online forms. Under a form 'your income of State', the site does not recognize the entry as with or without the dollar sign $. Tech MNSURE messages saying that this kind of problems is probably browser issues. The site MNSURE says it works well with Firefox 17, 22 and 24.

  I can't think of a change in 26 of Firefox that affect how a Web site interprets numbers. I suggest you enter only numbers and decimal point, in other words, let the comma of a number like 10,000.00.

  If you run Firefox 24 just for a Web site, you can use the "Portable" version It is a non-official Firefox package that you can run on a folder or a USB flash drive. It does not change your existing settings. You can choose your language from this page:

  Mozilla Firefox, Portable Edition 24.0 on SourceForge.net

• I've just updated to Firefox 17.0.1 and now I can't click a bookmark to open it or open new tab when you click New tab.

  I have several bugs mentioned in FF 17.0.1. I'm only able to open bookmarks by clicking on them and selecting open in a new tab in the menu dropdown. I can't open a new tab by clicking the new tab or by clicking Open a new tab in the menu at the top of the browser drop-FF. In addition, no buttons work in FF, such as home, previous, next or update. It is so aggravating!

  Once I posted this, I restarted with Add ons disabled and it worked... deleted a cpl of addons for the verification of the compatibility and fixed it.

• I did the larger window and now cannot get back the tabs. Escape does not work. I downloaded again, but still just a white screen. Help

  Escape does not work.

  Did you try F11?

  Double Post.

• Scrolling on the touchpad does not work after update. All advice?

  Hello I have a problem with my touchpad. After upgrade yesterday I can't scroll with it and I can not change the resolution. All advice?

  I have win8

  OK found:

  SVP1321L1EBI

• I've just updated for Premiere Pro CC 2014 and it does not start

  I've just updated for Premiere Pro CC 2014, and now I see an error message saying: he cannot find capable games modules. I updated the driver for my graphics (over-pants) card and tried running as Administrator without change. I'm under fire amd control center pro, which does not have the parameters of speed that is suggested for this problem. For some reason, the original first Pro CC can still open (thankfully). I looked at this problem the support page and it's listed, but when I click the link it redirects me to the beginning of the troubleshooting questions. I hope that there is an answer for letting me use the latest version of first!

  [go to Premiere Pro... JTS]

  

  Same thing here! Screen attached. I'm running the latest MBP with plug max. Anyone it @ Adobe...?

  UPDATE *-it's pretty easy to fix yourself. Just follow these instructions on Creative Cow: Re: problems starting CC 2014: Adobe Premiere Pro

• Having just updated for Firefox 4, when connecting to secure padlock GIS Web pages, n doesn't seem anymore. If anyone else has noticed this?

  Having just updated for Firefox 4, by connecting to a Web page that is secure, the lock sign does not appear. Any body noticed it?

  The lock is no longer a part of Firefox; It can give users a sense that a site is secure by not providing all the information related to a site. Familiarize yourself with the Site identity button in Firefox:

  • https://support.Mozilla.com/en-us/KB/site+identity+button
  • http://www.dria.org/WordPress/archives/2008/05/06/635/

  You can install an add-on to display a padlock in the URL/address bar:

  • https://addons.Mozilla.org/en-us/Firefox/addon/padlock-icon/

  You need to update the following. The Plugin version (s) below has / have been submitted with your question and is obsolete. You need to update in order to avoid the known security issues with the version (s) you have installed. Click on 'more system info... '. "to the right of your question to see what was included with your question.

  • Adobe Shockwave for Director Netscape plug-in, version 11.0
  • Adobe PDF plugin for Firefox and Netscape
  • Shockwave Flash 10.0 r42
  1. Check your plugin versions on one of the following links:
     • http://www.Mozilla.com/en-us/pluginCheck/
     • https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
     • Note: plugin check page lacks information about all versions of the plugin
     • There are links to tests specific plugin available on this page:
       • http://KB.mozillazine.org/Testing_plugins
  2. Update to Shockwave for Director
     • NOTE: this is not the same thing as Shockwave Flash; This installs the Shockwave Player.
     • Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place, so you can find it).
     • When the download is complete, exit Firefox (file > exit)
     • Locate and double-click it in the installer that you just downloaded, let the complete installation.
     • Restart Firefox, and look at your plugins.
     • Download link and more information: http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
  3. Update of Adobe Reader (PDF plugin):
     • Within your existing Adobe (If you have already installed) drive:
  • Open the Adobe Reader program in your list of programs
  • Click Help > check for updates
  • Follow the instructions to update
  • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
• Download the full installer (If you have NOT installed Adobe Reader):
  • SAVE the installer to your hard drive (save to your desktop so that you can find it after downloading). Exit/close Firefox
. Run the Setup program that you have just downloaded.
• Use one of the links below:
  • https://support.Mozilla.com/en-us/KB/using+the+Adobe+Reader+plugin+with+Firefox (click on "Install and update of Adobe Reader")
  • See also the download link': http://get.adobe.com/reader/otherversions/
• After installation, launch Firefox and recheck your version.
• Update the Flash plugin to the latest version.
  • Download and SAVE to your desktop, so you can find the Setup program later
  • If you do not have the current version, click on the "Player Download Center" link on the 'download and information' or 'Download manual installers' below
  • Once the download is complete, exit Firefox
  • Click on the installer, you just download and install
    • Windows 7 and Vista: will need to right click on the installer and choose 'run as administrator '.
  • Launch Firefox and recheck your version or up to the download link below to test the installation
  • Download and information: http://www.adobe.com/software/flash/about/
    • Use Firefox to go to the site above to update the Firefox plugin (will also install the plugin for most other browsers, except IE)
    • Use IE to go to the site above to update the ActiveX to IE
  • Download manual installers.
    • http://kb2.Adobe.com/CPS/191/tn_19166.html#main_ManualInstaller
    • Note the separate links for:
      • Plugin for Firefox and most other browsers
      • ActiveX for IE

• I've just updated to version 4 of ADE and now I'm having problems to open the books of examination of NetGalley

  I've just updated to version 4 of ADE and now I'm having problems to open the books of NetGalley review on it. I didn't have this problem before and now I get a message that says "permit to make mistake. "License Server Communication problem: E_AUTH_BAD_DEVICE_KEY_OR_PKCS12 ' I really need this resolved as soon as POSSIBLE that my comments have a date limit.

  

  For this problem, you must Deauthorize and reauthorize the ADAM.

  Follow the steps below: (note you must know your current permission user id and password)

  Windows:

  Click Start > run.

  Open, type regedit in the text box and press ENTER. The Registry Editor opens.

  In the left pane of the registry editor, find the following registry key:

  HKEY_CURRENT_USER\Software\Adobe\Adept

  Right click on the key to the follower, and then choose Remove.

  In the dialog box confirm the key deletion, click OK.

  Your permission is removed.

  ADE will be cancelled now.

  Now allow ADE new.

• I've just updated to LR 6.2.1 and now I cant access the subfolders during import subfolder, hope that they address

  I've just updated to LR 6.2.1 and now I cant access the subfolders during import subfolder, hope that they address

  Hi Crobadus,

  Yes, this will be fixed in the next update.

  Until then, you can go back to Lightroom 6.1.1 if you need to have the same workflow

  Instructions to restore an earlier version of update

  Kind regards

  Claes

• Firefox does not (Cup) of the lower edge and the right edge of the graph. IE10 does not work.

  Firefox does not (Cup) of the lower edge and the right edge of the graph. IE10 does not work.
  Office Windows 7 2009 service pack 1 Firefox 26 Internet Explorer 10
  Flash player version 11.9.900.170 plugin 11.9.900.170 activex version used by Firefox

  Problem began late November when Miniclip.com forced updated flash player to version above
  -C' was when they started to play a video advertising in the game box before you could start.

  Have screen shots of IE10 and Firefox26 side-by-side clearly showing the problem - how these can be downloaded for see you? E-mail? Web site? This place seems to be text only?

  In the meanwhile the grandchildren and self have learned to use IE10 instead of Firefox that we prefer.
  Their House of Windows XP has same Flash Player in Firefox and it works fine.

  Downloaded two screenshots on Media Gallery.

  You can not attach a screenshot in the first row who starts a thread, but you can do it in subsequent responses.

  Try disabling hardware acceleration in Firefox (you will need to close and restart Firefox).

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  See also:

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Reset the zoom of page on pages that are causing problems.

  • View > Zoom > reset (Ctrl + 0 (zero); 0 + Command on Mac)
  • http://KB.mozillazine.org/Zoom_text_of_web_pages

• Satellite S50T-B950 - touchpad does not work after update of Windows 10

  Hello "Toshiba."

  After the update for Windows 10 I have a problem with the touchpad does not work and became come boiling Forum and found that the solution is to uninstall "MOMENTUM Input Device" to "Device Manager", finally worked the touchpad, but alas multi touch properties such as: "zoom/minimize gestures of scrolling and two-finger" no longer work

  Please help me solve this company of Toshiba problem

  The same theme has been already discussed and resolved in this thread:
  https://Forum.Toshiba.EU/showthread.php?83885

  Then please follow the proceedings in the other thread to avoid misunderstandings

  by the way: here is the link to pilot site Toshiba win 10:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

• try to do an update and it gives me an error code 80240016 and when i run Microsoft solve this trobuleshooter it does not work and tells me an occure\red error.

  try to do an update and it gives me an error code 80240016 and when i run Microsoft solve this trobuleshooter it does not work and tells me an occure\red error. How can I fix it?

  Hello

  1. what patch did you try?
  2. update you are trying to install?

  Method 1:
  You can follow the steps in troubleshooting this article and check:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:
  You can also try the steps from the link:
  Windows Update, error 80240016
  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.
  http://support.Microsoft.com/kb/957307

  Method 3:
  You can also perform a clean boot, and then try to install and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

• Updated for first 2015.3 CC and now Audio dropped from stuttering frame-type questions...

  I've just updated for first CC 2015.3 on my system running on Windows 7, 32 GB of RAM, quad-xeons double...

  Seemed like a good idea...  Now, the sound stutters and drop frames.

  I have a multi-boot system, so I just loaded Adobe CC on my boot Windows 10.
  Always first 2015.3 does not play correctly and stutters.
  Has created a new project-sequence and placed an MP3 on the timeline without any video. Looks a sort of boat engine during playback and the visuals on the counters still indicate stuttering as well.

  Anyone else having this problem after the update?
  How can I get my 2015.2 or whatever I had on my system?  There is no menu drop down more on install to install an older version [other sites showed a fall to the bottom of the box where you can install the CC 2014 version but I have yet to see it]

  Major project I want to do and now the first is completely useless after this upgrade.

  If 100% fresh install go on Windows 10 Virgin operating system still has flaws that had my configuration of Windows 7 operating system, I'm not clear how 2015.3 playback can be rectified?

  After some troubleshooting I've narrowed the issue until this CC first 2015.3 don't like my graphics card, a SoundBlaster Z and its parameters.  2015.2 worked fine, but now the sound stutters and playback is extremely agitated turn upgrade.

  For this project, I am just finishing, I'll use, of all things, the HDMI sound goes to my computer screen.  The Nvidia graphics card I do not mind reading.  I'll tinker later and see if I can find a permanent solution...

• HP just update the bios on my computer and now I have no sound.

  I have a HP Pavilion 1d67cl g6, the windows operating system 7. HP just updated bios and now I have NO SOUND. In system devices, it says everything is working normally. Nothing is cut, just NOT of HIS. Help

  Hello:

  Go back to the BIOS and the BIOS to its default values and restart.  See if get you your audio files.

  Try reinstalling the audio driver, if it does not work.

  Try a hard reset of the laptop.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en & CC = US & objectid = c01684768 & prodTypeId = 321957 & prodSeriesId = 3688868

  Last resort, back up your files and perform a recovery of the system back to the form of the plant.

  Paul