I've lost the ability in pages of copy and paste graphics

Similar Questions

• Copy and paste graphic w/shadow in indesign - loses the transparency

  

  See the image above... I did a version vector of our company in illustrator logo (all referenced programs are cs5 btw) and it looks great, but when I copy and paste from Illustrator into InDesign, it loses the transparency around the logo. If I place the logo instead, it works fine. The problem is there are about 16 variants of the logo and its MUCH easier to copy and paste from a global file rather than have several files of different logos to be placed.

  General information on how the logo was created: the inner circle is several layers degraded (some with both transparency masks). The white line around the outside edge is a stroke extended, and he had a shadow applied effect (menu aesthetics), that I developed for it would scale correctly when scaling the logo from top to bottom. Here is a link to download the logo: download the logo

  Q: is there any way make InDesign preserve transparency when I copy and paste?

  You would be eternally grateful if someone has a solution that allows me to copy and paste!

  You have to put each version on its own layer in Illustrator and place the file I. Choose display options, cultures of the bounding box and select the appropriate layer.

  You going to have successful copy/paste with shadows that would be better applied in the ID anyway.

  Bob

• 4 computers on a local network, lost the ability to access cd players and DVDs on all stations

  I replaced the discs, drivers, resettled, still no access, but if the disk inserted in the CD the computer accesses when turned on. All are dell Windows XP computers.  All react the same and as near as I can tell they have all had this problem at the same time.  I have Microsoft Office 7 on a computer, it was Id'ed as not valid, I got the program to a computer repairman, who when questioned said that the keys were valid, he contacted Microsoft and they were in an oral discussion on the keys, and he gave me a new program still in its original packaging with the keys , but I can't load because of the readers of cd is inaccessible. I get a code 41 trying to find records

  My tech computer repair understood that there are double entries in the registry for the cd dvd players, which occurred since an update of the microsoft driver.  Computer Dell motherboards have been loaded with a different driver than most DVD cd and the update does not remove the old of the registry.  As soon as it has been deleted all computers were able to access cd dvd players.  One would think if Microsoft caused the problem they could send an update to fix or put an alert for us who have problems on how to solve this problem.

  I know a company that had the same problems, and they bought 4 new computers because their technology could not find the problem.  Quite expensive on the site on the part of Microsoft.  Bill could have made as much profit if they fix their mistakes and do it just with those who have lost money.  I turned down several jobs due to no cd dvd access myself, but at least I didn't panic and buy new computers.

  Hello Don1943,

  Thank you for visiting the Microsoft answers community.

  Try this:

  To resolve this problem on Windows XP automatically, click the fix this problem link. Then, click run in the file download dialog box and follow the steps in this wizard.

  Solve this problem
  Microsoft Fix it 50027

  Note this wizard may be in English only; However, the automatic fix also works for other language versions of Windows.

  Note If you are not on the computer that has the problem, you can save the automatic fix to a flash drive or to a CD, and then you can run it on the computer with the problem.

  If this does not resolve the problem, please consider the rest of the KB to: http://support.microsoft.com/kb/314060#diditfix

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lost the ability to save files jpeg and gif on my system!

  All the images that I record on my computer suddenly changed to a "jpeg" to "png" and it wouldn't even give me the option to save in any other format different from that of "png" or "bitmap". How can I get this option because I can't save the formats 'gif' no more? Is there maybe a program I downloaded has changed the format? I already tried the 'auto play' settings and other options but I am out of ideas now. I know how to change the format of single images that I use "irfan view" or painting to do, but I would like to know how to change the format of all my pictures files. Thank you.

  It may be interesting to try to delete your temporary Internet files:

  Windows Vista - temporary Internet files to Delete
  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-temporary-Internet-files How to view the temporary Internet files of Internet Explorer and settings in Vista
  http://www.Vistax64.com/tutorials/94239-Internet-Explorer-temporary-Internet-files-settings.html

  IrfanView allows to convert photos in a batch... There are a lot of
  parameters to be set, but the following steps should help you get started...
  (Once you're set up the conversion goes very fast)

  Open IrfanView and go... File / Batch Conversion...

  Tick... Batch conversion...

  Choose a file format...

  On the left, click on the Options button and choose 100% / OK...
  (If 'Save transparent color' is checked, uncheck)

  Choose an output directory...

  In: Watch in... Select the files you want to convert...

  Click left on the add all... button you can add additional files
  and don't forget to click on the button Add new...

  Left click of the... Start batch... button...

• Sometimes, I use Firefox as my browser to access my Yahoo mail. If I put a link in my email, no one can open the link because the link to appear in the text. They must copy and paste the link.

  I have Windows Vista.

  Just above the text box that allows you to enter the text of the message on the "new message New Mail page" there is usually a bar of buttons with buttons to add text formatting like bold and italic.
  
  This toolbar can also have a button to activate a clickable hyperlink text link (look for a string like button).
  
  You can select the text and click on this button to activate the link into a clickable hyperlink.
  
  If you can not find the button, and then move all the to check the ToolTip of each (for example to insert a hyperlink).

  • Link - https://addons.mozilla.org/firefox/addon/make-link/

• I lost several editing tools!  Cut, copy, and paste are all grey and inactive. How to make a comeback?

  

  When DW starts acting weird, the first thing to try is delete the Cache of corrupt in DW.  Be sure to show files and folders hidden on your operating system.

  http://forums.Adobe.com/thread/494811

  If this does not help, try to restore preferences

  http://helpx.Adobe.com/Dreamweaver/KB/restore-preferences-Dreamweaver-CS4-CS5.html

  Nancy O.

• Change the default copy and paste file or folder name to FileName (n)

  Hello

  I'm not sue if there is a correction that relates to windows or office other programs.

  I was wondering if there is an easy way, I could set up the default naming for files or the folders that I have copy and paste then. By example, if I copy a file called "Filename" and paste the copy in the same location, the name of the default copy is now given a name 'copy file name. Is it possible to change the default "FileName (n)" value, where n is 1 or 2 or... .depends on the question of whether or not a file with that number already exists.

  I use windows 7 and office 2010. I have a 'SuperCopier22beta' program that I think is the copy/paste?

  Thanks for the help.

  Hello

  There is not a way to change the default behavior of copy file name. There may be a 3rd party program, but common way is by design.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to copy and paste the touchpad on a Toshiba portable computer Satellite C655 S5505 windows 7?

  OT:touchpad.

  Hello, can you please suggest how to copy and paste the touchpad on a Toshiba portable computer Satellite C655 S5505 windows 7.

  It worked a few days ago... I don't know what I did so that it does not work right. I like to copy and paste when right or click with the left button of the touchpad... They have a key on the Panel of key with copy and paste and cancel and cut options next to the bar area to the right of the ALT key with lines and an arrow on the key... Always like the old mode right click and copy and paste from the touchpad... Thank you

  Hello

  Check with the manufacturer of system support, documentation in line, or forums as there probably
  are shortcut keys that enable and disable the touchpad functions.

  Toshiba has also map of keys which allow easy adjustment of the TouchPad. See support for Toshiba
  and Forums. The key shortcut for the TouchPad, if they are responsible in the Fn + F9 or see the key card
  So usually loaded at the top of the screen.

  There is also usually a TouchPad control utility that loads in the Notification area next to the clock
  at the bottom right.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad
  entries) and some have a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  This utility also allows to control the TouchPad:

  TouchFreeze
  http://code.Google.com/p/TouchFreeze/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Copy and paste Illustrator does not erase the Clipboard

  I am running OSX Yosemite and the latest version of Illustrator.

  I have a file that has multiple plans of work and symbols.

  When I copy text and paste in another space reserved for text, it sticks the text previously copied to the Clipboard. So, first copy and paste works fine, but every time after that include a lot of text from previous attempts to block. Looks like, Illustrator is not clear the Clipboard when copying text in there.

  Also, stick to the text of a TextEdit in Mac doesn't seem to work.

  This looks a lot like a bug and really slows me down. Is there some sort of parameters to the Clipboard, or other ways to get rid of this feature?

  drawnworder,

  If none of the brighter solutions appear, try the list.

  The following is a general list of things you can try when the question is not in a specific file (you tried/made some of them already). 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible);

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) uninstall, run the vacuum cleaner tool (if you have CS3/CS4/CS5/CS6/CC), and then reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Having a color changing the question when you copy and paste things into a new document

  Hello, I had a question about copying and pasting in photoshop (something I thought I'd be able to handle).  See the screenshots below:

  First with the move selected tool, I went to command + click on the dark blue model below to highlight and select its layer.  Then, in the following screenshot with the marquee tool, I was trying to copy a square piece of 100 x 100 px of the model.

  

  After hitting the command + c to copy, and then I opened a new document with the following and click settings on ok:

  

  I knocked and then command + v to paste what I had copied the new document that I created.  However, the part gets confused me is that the color of the background pattern that I copied and pasted is now a different color, as shown below:

  

  The glued color is obviously much darker than the original.  Anyone know what is happening here?  Very confused.

  Some how you have copied a composite instead of the layer + styles.

  Try this instead, select the layer as you did

  Create a new document as you did

  Use the move tool and drag the document on the tab of the new document with the mouse still down, drag your document down to the new document.

  Because your new document is set to 100 x 100 is what adapts the layer, so you should be good to go.

  If you still have a question of color or something has not transferred correctly let us know.

• Copy and paste titles wasn't supposed to automatically create a new title since the last update?

  I thought that updates this year for the first includes the smart idea of using headlines in the same way as FCP, copy and paste creates a new title so that when you change the content that will not affect the original title.

  When I change one it is affected other so I just copy and paste and it again using the same active title.

  Please let me know if I'm doing something wrong.

  Try a click + drag.

• I've lost the ability to sync my playlists from my mac to mac iPhone and iPod since the latest updates made!

  I've lost the ability to check what playlists I want to sync between my computer laptop mac and my iPhone and iPod. When I look for my playlist it only shows "all my songs. I can see my playlists in the sidebar on the left, but I don't have a summary page let me choose what songs or lists I want to synchronize with other devices. Anyone know how to go back to the way it was, or should I give up iTunes and lose all the songs that I bought!

  You won't see the playlist on the left sidebar.

  Select the iPhone at the top left of iTunes.

  Click on music.

  

• Inkjet HP 2545: lost the ability to print the text

  I've lost the ability to print the text. Cards print, but without text etc etc.

  In the paper here troubleshooting steps can help solve the black print is not on your Deskjet printer 2545.

• I've lost the ability to view my deleted messages. When I go to the box delete there's nothing here even if I have 500 messages in the file to remove. What is the problem with this folder

  I've lost the ability to view my deleted messages in the folder.  When I select the deleted messages has nothing to do with the record, even though I have 500 messages in the folder.

  Go to view | Current view | Show all messages.  See if they appear then.

  If this is not the case, what email program are you using?

  Steve

• lost the ability to create a "new folder".

  After I closed the Sunday evening I had the "not - or disconnect - 2 updates. Monday, I discovered that I had lost the ability to create a "new folder"!  By clicking on the "new folder" button does nothing.  Do a right click in the box brings up a drop down window that does not list "new folder" in "new...". "No one knows what happened or how to make the"new folder"button to work again?  Thanks for any help.  Abbi

  Hello

  Thanks for the post.

  It seems that you are facing problem with performances of the computer after the installation of Windows updates. We need a few details to help the issue, please answer the following.

  What version of Windows operating system do you use?

  Check out the following link and check the status of the issue.

  You can check the link following, if you use the Windows XP, Windows Vista and Windows 7.

  New command missing in Windows Explorer.

  http://support.Microsoft.com/kb/180257

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows.

  I hope this helps.