I've tried everything recommended to remove the Client Services for NetWare and still not get quick change of the user's screen. Becomes very angry. Rob

Similar Questions

• Cannot uninstall the Client Services for Netware on Win XP sp3.

  Try to restore the screen of welcome on Windows XP sp3. Not connected to the server netware in any way. Client for Netware only qualified auto service and only option is to start. When trying to start the service says that the system cannot find the specified file. Client for Netware is NOT listed under properties of the connection to the Local network either, so it is impossible to uninstall this way. Any suggestions?

  might be interesting to try the following, go to control panel, click internet connections, your internet connection make a right-click, and then click the Properties tab, it should open this connection uses the following items box.

  If you see no client services for netware in this box, lock underneath you should see two tabs (installation) and (uninstall)

  the trick is to reinstall it first and then uninstall it later.    Click the install it should open another box box should be the client services for netware and Songbird for microsoft, highlight the client service for netware, and then click on install let the computer install it and restart the computer, then go back in to the Control Panel on the internet, and click connections right properties, once the box opens again it should now have the client service for netware inside now just uninstall highlight and click on uninstall, let the computer uninstall, then restart your computer again, click on Control Panel and use click on modify use way connect you now the home screen should be on.

• Error Client Services for NetWare has disabled the Welcome screen and fast user, any change by changing the account settings

  Original title: "Client Services for NetWare."

  When I try to change my account settings, I get this message "client for NetWare has disabled the display of welcome and Fast User Switching.

  To restore these features, you must uninstall Client Services for Netware ".»

  I checked and the customer service is not installed on this computer.

  He puts this message up no matter what I try.

  What can I do to remove this problem?

  Hello

  Were there any changes made to the computer before the show?

  Please follow the steps in the link.

  Error message when you try to turn on welcome screen or Fast User Switching

  http://support.Microsoft.com/kb/315347

• How can I close the Client Services for Netware that is me project to use the fast user switching without losing my internet connection

  For NetWeare customer service

  How can I close the Client Services for Netware that is me project to use the fast user switching without losing my internet connection

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in Forum.You IT Pro can follow the link for your question:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

• "Client Services for NetWare has disabled welcome screen and fast user switching" how to uninstall the customer service?

  It is said to uninstall the Client Services for NetWare to use the Welcome screen and the fast user switching. How can I do this?

  Hello

  See the article below that may help you resolve this issue.
  Error message when you try to turn on welcome screen or Fast User Switching
  http://support.Microsoft.com/kb/315347

• How to activate the screen of welcome and fast user switch client services for netware

  How to activate the screen of welcome and fast user switch client Services for NetWare...

  How to restore and step to uninstall client services for netware

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link: http://social.technet.microsoft.com/Forums/en-US/winserverPN

• I am trying to load photos in lightroom 6 on my mac and did not get the option "Copy to DNG, copy, move, add" on the screen, only import.

  Why am I only see an import screen and not the copy as screen? I'm shooting in the first.

  Thanks for your reply, but I found a number of Adobe and talked to a technician.  Looks like I got the update, and they changed the screen, so now I have to find "copy as DNG" on the right side under Advanced.  Thanks for the reply.

• Remove client services for Netware to connect 1394

  How can I remove the Client for Netware a 1394 connection?

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:

  http://social.technet.Microsoft.com/forums/en-us/winserverNIS/threads

• "Client service for Netware has disabled the Welcome screen. To restore these features, you must uninstall the Client for Netware Service". How do we uninstall client services for Netware

  Original title:

  How to uninstall a program that does not appear on my conputer? I need uninstasll for Netware client services so that I can geyt my back to the Welcome screen

  WHENEVER I TRY TO go BACK to MY SREEN WELCOME ORIGINAL SHOWING the USER ACCTS I GET THE MESSAGE THAT I need TO UNINSTALL the NETWARE. BUT AS I SAID I DO NOT HAVE THIS PROGRAM, AND I SEE NO FILE WITH THIS NAME

  Hello

  
  To work on the issue, check the following link.
  
  Error message when you try to turn on welcome screen or Fast User Switching
  
  http://support.Microsoft.com/kb/315347
  
  Check if it helps.
   

• Services the customer has disabled the Welcome screen and the fast user switching it tell me to uninstall client services for netware, I can't locate this uninstall need help!

  I don't know exactly what the Client services program is named for uninstall.

  Hi BethGivens,

  ·         Have you made changes on the computer before this problem?

  I suggest you follow the steps in the article.

  Error message when you try to turn on welcome screen or Fast User Switching

  http://support.Microsoft.com/kb/315347

• I tried everything and still not get my firefox to respond

  I can get my browser to open, but then he said: it does not. I tried to start in safe mode, to reset, and even reinstalled Firefox and it still does not work. I have also conducted an audit of malware and restore my computer. I went through the troubleshooting and am unable to solve the problem. I can get online via the Explorer, but I love and miss my Firefox. What can I do else?
  I just tried to add troubleshooting information and it says that it cannot find the program to open it. Ugh, I'm really getting fed up! I'm not a computer expert, I'm the equivalent of about a student of 5th when it comes to computer skills. Help, please! Thanks in advance for any help.

  I finally thought to it! I was about to take my laptop behind the barn when my daughter called. I told him that I had worked on my cell phone and she says: oh did you check your java? She said that when its Firefox is upward, its usually to java. I went and downloaded java, restarted my laptop and back!
  Thanks to ideato for your help!
  And I hope this will help others with the same problem in the future!

• How can I remove the user name and the image of Windows XP new Start Menu

  Two questions:

  1. How can I delete the user name and the image of Windows XP new start; and

  2. my computer keeps asking me to press the F1 key to start Windows.  How to skip this part?

  Thank you.

  Hello

  The image of user account can be removed by disabling the Welcome screen. Or, by opting for the classic Windows theme. Follow the method described in this article, if you want to remove the user name and the picture in the Start Menu, without disabling the Welcome screen and Windows XP theme.

  For those who want to delete the user name and the image of user account from the Start Menu, in order to have a blue white Panel at the top, try this:

  Registry warning
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Step 1:

  a. start Windows Explorer and go to this folder:
   
  C:\Documents and Settings\All Users\Application Data\Microsoft account images

  b. in this folder, rename the BMP file that corresponds to your user account.
   
  (For example, if your user name is Robert, rename Robert.bmp to old_Robert.bmp)

  c. then rename the following folder:

  C:\Documents and Settings\All Users\Application Data\Microsoft account Pictures\Default pictures
   
  to something else, for example,.
   
  C:\Documents and Settings\All Users\Application Data\Microsoft account Pictures\No_Default images.

  Step 2:
   
  To remove the user name, follow these steps

  a. Click Start, click "RUN" and type "regedit.exe" and navigate to this key:
   
  HKEY_CURRENT_USER-Software-Windows Microsoft\------CurrentVersion-policies-Explorer

  b. in the right pane, the value NoUserNameInStartMenu-value data 1.

  c. close Regedit.exe and restart Windows.

  You'll find yourself with a blue area at the top of the Start Menu.

  Regarding the pressing 'F1' to start Windows, you have made no changes or was there a system crash after which the problem started?

  You may need to change the boot sequence in the BIOS to the default settings. I recommend you contact your PC vendor for this.

  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• I bought my computer from someone else. Change user accounts did not name of each file in the computer. How can I change or remove the user/name (my name) /document? __

  I bought my computer from someone else. Change user accounts did not take their name off of each (or more) file in the computer. How can I change or remove the user/name/document
  I have looked everywhere and changed user information and the name of the administrator. What can I do else?

  Hello flashgordonjxn,

  Who has ever done the installation of Windows, the installation program asks you to enter your name and optionally, the name of the organization. These registration information appears under recommended for in the general tab of the System when you click Start, click Control Panel, click performance and Maintenanceand then click System.

  To change see instructions below:

  1. Click Startand then click run.
  2. In the Open box, type regedit, and then click OK.
  3. Look for the following registry key:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion
  4. To change the name of the company, follow these steps:

     In the right pane, double-click RegisteredOrganization. Under value data, type the name that you want, and then click OK.

  5. To change the name of the registered owner, follow these steps:

     In the right pane, double-click RegisteredOwner. Under value data, type the name that you want, and then click OK.

  6. Click Exit on the file menu to exit the registry editor.

  Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• my windows vista starts normally until I have pass the user coice screene. After that, I see the cursor but everything is black. What should I do? Thank you very much!

  my windows vista starts normally until I have pass the user coice screene. After that, I see the cursor but everything is black. What should I do?

  It was probably caused by the removal of any file system as I was scaning the pc for malware and probably deleted some important file. only safe mode works now
  and I need my computer quite urgent for the University.
  Thank you very much!

  Hello

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to remove the user from the IOM by using Trusted Recon

  We trust Sun to IOM LDAP Recon. We delete usually old Sun LDAP users periodically. According to the requirement, these users should also be eliminated from IOM as well as all its databases that are put into service.
  
  Looks like that, the behavior by default of 'iPlanet Trusted remove user Recon Task' is to set the user status to 'Deleted' and 'Revoked' about the users corresponding IOM and resources put into service. How can I remove users from the IOM as well as the database placed in service in the case of user removed from Sun's LDAP?
  
  Thank you!
  Kabi

  Once a user is created in the IOM, you cannot remove it. As you said, the default behavior for the removal of the recon user approved is that the user will be disabled in IOM and revoked from all target applications. Revoke the user will remove the user from the target applications.

  This is done for the purpose of audit so that later we can determine which users have been removed or terminated.

  But as a you can manually delete the records of user database directly which is not recommended.