I've updated for picture with the captain and when I plug in my iPhone it loads the same pictures twice each time how it stop loading the same things every day?

I've updated for picture with the captain and when I plug in my iPhone it loads the same pictures twice each time how it stop loading the same things every day?  I tried to make the old default iphoto but picture still open when I plug in my iPhone?

Advertisement

I tried to make the old default iphoto but picture still open when I plug in my iPhone?

When the iPhone is connected and Photos opens, select iPhone in sideba of the windowr of Photos. Then, uncheck the option 'Open for this iPhone Photos' below the toolbar.  Do this for all your iPhones. The hook should be unmarked for each device individually.

Tags: iLife

Similar Questions

  • USB not recognized problem, it worked fine before, then update iOS to 6 is out, and when I plugged it in iPad after update, started having error shortly after.

    I conducted an audit of file, the disk check, you click on uninstall the driver in Device Manager and went as far as reinstalling Windows (I sell the laptop) and still have the error! Someone help me please correct.

    It was working fine before, then update iOS to 6 came out, and when I plugged it in iPad after update, started having error shortly after. I tried to install and unistaling software from apple, and as I said, I even reinstalled windows. always error.

    Hello

    Method 1:

    I suggest you to run the fixit from the link.

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems

    Method 2:

    Step 1:

    In Device Manager, check whether the USB controller appears as working properly or have a yellow on her exclamation when the device is connected. Look for error codes as well.

    http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

    Step 2:

    Check if the device is recognized on another computer.

    Hope this information is useful.

  • Will there be a CS6 PP was updated for compatibility with the Sony XAVC-S codec

    Hi, well it's all in the title,

    Should I wait for this update? I just noticed there is not since August 2013 and some new HD cam, hybrid DSLR use this new codec.

    so it would be great not to forget the CS6 users, upgrade to CC is not a solution for me, I would prefer to swith to FCP X cc.

    I have Sony FDR-AX100 where pulling 4K video in Sony XVAC S codec, and I have two Adobe Premiere Pro CC and CS6.  Don't have import problems, reading or editing images in this format.  XVAC S is really simply a high-level h.264 format. I use these two programs on one end of 2013 Mac Pro with 64 GB RAM and 12 hearts 10.9.3 OS.

    Tom

  • Just downloaded latest updates Camera Raw update for use with my new Sony RX100 M3 but still impossible to get the RAW files to open it. Any suggestions?

    Just downloaded latest updates Camera Raw update for use with my new Sony RX100 M3 but still impossible to get the RAW files to open it. Any suggestions?

    Nevermind, I finally got it to work, thanks!

  • SVN: #155021. You cannot update this file with the help of Dreamweaver Subversion integration because a new Subversion client application on your machine has made updates to the file Subversion meta data. For more information on this problem

    Can Hello anyone help?

    After you configure Subversion in Dreamweaver, I get this error again!

    SVN: 155021 #. You cannot update this file with the help of Dreamweaver Subversion integration because a new Subversion client application on your machine has made updates to the file Subversion meta data. For more information about this issue, see http://www.adobe.com/go/dw_svn_en.

    even after following the instructions http://www.Adobe.com/go/dw_svn_en Download the extension, python change the var in windows to say «;» C:\Python26'

    with & without quotes, with or without; before C

    command > comparability of Subversion to get the following error "the Conversion process has failed. Please make sure you have Python installed and you check Python PATH parameter'

    I managed to get all the files after the installation, I locked, unlocked and commit a file to test fact so that was all works well, the only part I'm not retrieves the latest version, this is because Subversion is 1.6.2 and dreamweaver must revert to the version 1.4.5 on local to work, the compile someone at - it an idea what to try next in order to make it work?

    Just a reminder!

    1. I configure Subversion through guidelines on http://help.Adobe.com/en_US/Dreamweaver/10.0_Using/WS80FE60AC-15F8-45a2-842E-52D29F540FED. html
    2. I managed to get the latest SVN version
    3. Lock, unlock and commit a file
    4. Installed Python in C:\Python26 change the path in windows system properties > advanced > Environment Variables > system variables > New > Python =; C:\Python26 also C:\Python26
    5. I also tried the same thing in the User Variables
    6. Installed the extension DW Subversion compatibility

    7. Tried to run the compatibly with the command > Subversion comparability in DW

    Welcome any suggestion to solve this?

    Hello

    There has been a lot of problems using svn with dw, and I know many people who have stopped trying to operate correctly.

    As much as I know dw will not work with newer versions of svn (over 1.5), and even then, there are a lot of problems, a possible solution is to try subweaver (at- http://code.google.com/p/subweaver/ ), as this has solved some of the problems associated with the use of tsvn dw environment.

    PZ

  • Why do an update with the same name every day to security update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2467175)

    I installed this point at least 6 times. is there a change in one update to another with the same name?

    Hi RogerMawdsley,
     
    Follow the steps listed in the article given below to resolve this issue:
  • Updated my iPad with the new OS.

    Updated my iPad with the new OS. Initially it lights, so I have two buttons held together and finally happened. Now it is stuck on the screen with the time and will not move forward, nor is it resets. Is there any solution for this?

    Thank you

    Kat

    Try a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. You won't lose anything.

    If a force restart does not help try recovery Mode:

    https://support.Apple.com/en-us/HT201263

  • Code 80070005 that I tried to install a update for my HP w1907 wide LCD monitor since I got this computer last year, but the installation fails every day.

    I tried to install a udate for my HP w1907 LCD's wide screen since I got this computer last year, but the installation fails every day.

    Thanks for the clarification, jackfrompa. If the monitor works to your satisfaction, then I see no reason to update his driver unless there is a Security problem with the current driver.
    I can't find info list of video drivers of HP being a security risk.
    Is the latest driver display on the site of HP for Vista Premium 32 bit for the HP w1907 19 inch Widescreen LCD Monitor

    Version: 2.00 Rev a.
    October 16, 2008

    There is also a driver for LCD 19 inch HP w1907 screen available for Vista which was released in October 2008 with the same Version, but I don't know if it is the same driver for the HP w1907 19 inch Widescreen LCD Monitor.

    If it helps, here are the steps from HP for a monitor driver installation in Windows 98, Me, XP and Vista .
    MowGreen Services consumer safety update

  • I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work.

    I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work. I can get the led light will stop flashing when I open the door all the way, the machine detects the drive but do not read or close on its own, how can I get this disc surgery? Downloading updates, I installed a software disc, when I ejected the disc, the drive comes of is stopped. The computer still sees the drive, but will not read or even close on its own. I also had been using my computer in mode mute until I tried to increase the volume and now the computer tells me no playback device installed. Device Manager acknowledges the Harmon/Kardon soundsticks connected to it, but nothing does, how it works? The Control Panel also sees the soundsticks, but still when I try to move the volume the computer says there is no playback device installed.

    Hello

    1. do you get any error code or error message?

    2. what day you installed recently?

    It seems to be a problem with the hardware. I suggest you try to uninstall and reinstall the CD/DVD driver and check if it helps.

    Follow the steps to uninstall and re-install the drivers.

    a. click on start toreduce this includes this im and then click Control Panel.

    b. click system and Maintenance, click Systemand then click on Device Manager.
    Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

    Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.

    c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.

    d. When you are prompted to confirm that you want to remove the device, click OK.

    e. restart the computer.

    If the methods mentioned above did not help, then it would be best to contact the manufacturer of the computer/CD/DVD player.

    Hope the information is useful.

  • Hello! Pro iPad comes with a specific set of fonts in Keynote? Or is it possible ad fonts, for example with the font book?

    Hello! Pro iPad comes with a specific set of fonts in Keynote? Or is it possible ad fonts, for example with the font book?

    This is a list of the fonts installed in iOS 7, as far as I know, it has not changed for iOS 9.

    iOS 7: List fonts - Apple Support

    Fonts are embedded in the iOS, a few Apps will bring new fonts when loading the application. Keynote will use those that are pre-loaded with iOS. There are third-party fonts that can be installed, but you will need to check that they are working with the speech of the seller of these fonts.

  • Any camera regardless of the interface is available for use with the LabView interface.

    Hello

    I intend to go for some CMOS camera,

    but I have a huge doubt before buying, the camera of menttioned above is not anywhere in this list. Nor can I see any type being supported USB device.

    The question is

    1. is a camera regardless of the interface is available for use with the LabView interface?
    2. Can I build a VI to communicate with any device image and recording of camera and take the data?

    Any kind of help or advice is greatly appreciated... I have to buy a CMOS camera and begin to run.

    Thank you...

    Hello Virginia,.

    I am pleased that this information has been useful, one thing I wanted to mention is that USB 3.0 has its own standard USB 3.0 Vision which is currently not supported. If this camera is also Direct Show compatible then you will be able to acquire an image using IMAQdx and manipulate all the attributes that are published to the API Live Show.

    I hope that USB 3.0 Vision will be supported in the near future, and we tentatively announced for this standard of communication for the August 2013 Vision Acquisition Softwareupdate.

    See you soon,.

    -Joel

  • Dvd player MediaSmart not working - when a Blu - ray Disc I'm invited to be updated, but even with the update it will not play.

    I have laptop HP Pavilion dv7-1260.  When I put in a blu - ray disc I'm propmted to get an update.  Even with the update, it will not play a blu ray.

     

    Hello

    ·         What is the update message that you receive?

    ·         Do you have an error message when you try to read the Blu - ray Disc?

    ·         This problem occurs only with Blu ray discs or any of the others?

    To play a Blu - ray disc, you must use a non-Microsoft program that supports Blu - ray playback and a device that can play Blu - ray discs.

    See the link below:

    http://Windows.Microsoft.com/en-us/Windows7/MPEG-and-DVD-video-frequently-asked-questions

  • Has anyone found or written a "Win 7 USB driver" for use with the Olympus C-3000Z digital camera?

    Has anyone found or written a "Win 7 USB driver" for use with the Olympus C-3000Z digital camera?

    On Fri, 28 September 2012 18:02:40 + 0000, bertcoy wrote:

    Has anyone found or written a "Win 7 USB driver" for use with the Olympus C-3000Z digital camera?

    Looking at the website of Olympus, it would appear that we do not
    There are.

    But you do not need a driver because you do not need to connect your
    camera to the computer. Just put the memory card in a card reader and
    access like this instead. I prefer to do it with my camera,
    because it is easier, faster and uses no battery in the camera.

    Ken Blake, Microsoft MVP

  • INS-06003: failure of connectivity SSH without password for installation with the following

    Dear all,

    I am in the process of installing Oracle 11 g on Redhat Linux 2 grid Infrastructure.
    I have installed ssh on both RAC nodes and when I run

    SSH - p7547 racnode1 "date; hostname ".
    SSH - p7547 racnode2 "date; hostname ".

    I get the date and the hostname without error on both nodes.

    But during the installation of the grid, I get this error message:

    INS-06003: failure of connectivity SSH without password for installation with the following nodes: [racnode1, racnode2]

    My thought is that it is because of the port has changed 22: 7547 but where them specify this port in the configuration of the CARS?

    I also get this information in the Setup log:

    WARNING: Could not establish a SSH connectivity with node racnode1. Reason: java.net.ConnectException: connection refused

    Kindly help on that.

    Kind regards
    Imran

    misterimran wrote:
    Dear all,

    I am in the process of installing Oracle 11 g on Redhat Linux 2 grid Infrastructure.
    I have installed ssh on both RAC nodes and when I run

    SSH - p7547 racnode1 "date; hostname ".
    SSH - p7547 racnode2 "date; hostname ".

    I get the date and the hostname without error on both nodes.

    But during the installation of the grid, I get this error message:

    INS-06003: failure of connectivity SSH without password for installation with the following nodes: [racnode1, racnode2]

    My thought is that it is because of the port has changed 22: 7547 but where them specify this port in the configuration of the CARS?

    I also get this information in the Setup log:

    WARNING: Could not establish a SSH connectivity with node racnode1. Reason: java.net.ConnectException: connection refused

    Kindly help on that.

    Kind regards
    Imran

    You can have the file/etc/ssh/ssh_config, where the default port is set at 22. Replace with 7547 and try ssh racnode1 "date; hostname". If it works, then it contains the definition, you may need to perform.

    Kind regards
    Julien

  • ORA-01035: ORACLE only available for users with the RESTRICTED SESSION privilege

    Whenever I have to connect as user sys as sysdba, I can connect at ease.

    But every time that I try with a user (one for monitoring tool). I get a message, database is in restricted mode.

    SQL > connect patrol05/patrol $05

    ERROR:
    ORA-01035: ORACLE only available for users with the RESTRICTED SESSION privilege

    WARNING: You are more connected to ORACLE.

    Your database was opened with restricted session.
    As sysdba, run the following command to session restrcited dissable the option:

    alter system disable restricted session;
    

    Best regards
    Norbert

Maybe you are looking for

  • Voicemail problem

    After that I downloaded the iOS 10 update last night I am now unable to listen to my voicemails as the 'play' button is grayed out. How can I fix this? Thank you

  • Stuttery playback in FCPX

    I have the newer model iMac, everything is upgraded, and 64 GB of RAM. All software are the latest versions. I'm running on an issue where I play the timeline in FCPX and after a minute or so, it'll start to stutter and drop images. Same thing happen

  • SBRIO DIO still available with 9693 mezzanine card?

    Hello! I intend to use a SBRIO (9626) and a map of mezzanine 9693 for plugging a 9853E module CAN. However, I would also need interfacing #20 DIO, 4AI and 4AO. The signals will be be wired on J502 and J503 connectors. Using 9693 mezzanine card, alway

  • How can I change my icons for vista file extensions?

    Recently for some reason any I just noticed that my icons for file extensions under the symbol icon mp3 music just normal to an icon with a video symbol and a note of music in the same icon. It really bothers me because I'm starting to confuse some o

  • RemoteScan is not for some users

    I recently installed RemoteScan on a new machine and got all this work in one programs installed on the RDS Server. In the other program requiring analysis, RemoteScan appears only for some users. I tried to recreate the user profile. I tried to copy


HashFlare