I've updated my explore since the MSN site and then restarted it said I was running a version of Windows.

Similar Questions

• I recently bought a Macbook Pro model of basic (January 2016) from the Apple site and found once it arrived it was a 2012 model. Should I have a leg flying to complain?

  I recently bought a base model Macbook Pro 13 "(29 janvier 2016) of the Apple site and found once it arrived it was a model 2012." Should I have a leg flying to complain? I expected to have been a model of 2015 at least. There is no indication on the site it is a 2012 model that I see.

  Because the MacBook Pro with the DVD has not been updated since 2012, there is no 2015 version of this model. I think Apple has this MBP autour, for those who really need an optical drive on the road. Otherwise the MacBook Air or rMBP is a better computer (and the 2015 MacBook Air is faster than the MBP of base)

• This is the message I get this morning cannot launch Adobe InDesign that you do not have sufficient permissions to access the preferences folders. Make sure that you have the appropriate permissions and then restart Adobe InDesign.

  need help this is the message that I have this morning cannot launch Adobe InDesign that you do not have sufficient permissions to access the preferences folders. Make sure that you have the appropriate permissions and then restart Adobe InDesign.

  Hi amyturnkey,

  What operating system do you use? (Windows / Mac?) What version number?)

  This thread pourrait be useful: error starting InDesign CC: '... ". lack of sufficient permissions to access the folders preferences'

  Kind regards
  Maurice

• error: could not launch Adobe InDesign that you do not have sufficient permissions to access the preferences folders. Make sure that you have the appropriate permissions and then restart Adobe InDesign.

  A new installation of indesign CC 2014 - I got this error message:

  Cannot launch Adobe InDesign that you do not have sufficient permissions to access the preferences folders. Make sure that you have the appropriate permissions and then restart Adobe InDesign.

  
  

  I tried to uninstall the application and reinstall it, still get the error

  
  

  I tried to install a previous version - indesign 9; also get the error

  
  

  I tried logging out CC and return, still does not work

  
  

  I tried restart my desktop computer, still does not work.

  
  

  went to the disk utility to verify and repair permissions. repaired all of an existing, still does not work
  

  
  

  Apparently, a permissions problem, I don't know what to do to fix this
  

  See does not start under new inDesign CC | Adobe Community

• Cannot launch Adobe InDesign that you do not have sufficient permissions to access the preferences folders. Make sure that you have the appropriate permissions and then restart Adobe InDesign.

  I'm unable to launch InDesign CC2015 and I get the above message. A little history: my daughter (college House) had already installed CC2015 on our computer at home for little work. It has access through his school. I decided to sign for my subscription to the CC and were able to open Photoshop, Illustrator and other apps that I downloaded, simply not InDesign. I deleted his old copy and re-installed InDesign, but still no luck.

  I am connected to creative cloud through my account, not his. Any suggestions? Thank you.

  She motioned to his account of cloud so the computer would be 'open' and waiting for you to sign IN?

  You use an account that has ADMINISTRATOR-level permissions?

  Do run as Administrator http://forums.adobe.com/thread/969395 [says again and also to Adobe all emissions] will sometimes fix errors "weird" or "authorization".

• Sometimes a web page is displayed with only text and no picures. It is not always the same site and is not always the case. If I'm going to explore for the same website that always works

  Sometimes a web page is displayed with only text and no picures. It is not always the same site and is not always the case. If I'm going to explore for the same website that always works

  Hello

  Also try a Ctrl + F5 refresh. This allows to bring the content of the page again.

• Since the installation of Firefox 8, when I type anything in the address bar and then press "enter" or click on the arrow for "go to the address in the address bar", nothing happens!

  Since the installation of Firefox 8, when I type anything in the address bar and then press "enter" or click on the arrow for "go to the address in the address bar", nothing happens! Similarly if a place is indicated by the location bar AutoComplete feature. I hit "enter" or click the "go to" and nothing happens. " Keyboard shortcuts to "complete the .com, .net, etc. addresses" doesn't work or the other. The address bar has worked well for entering web addresses before Firefox 8. Help, please.

  Try Firefox SafeMode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the Firefox 4, 5, 6, 7 SafeMode pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  When find you what is causing that, please let us know. It might help others who have this problem.

• I have updated, but how do the awesome bar and the line at home to show?

  Miss me the line having the awesome bar and the Home icon.
  How can I get this crucial line?

  I've updated to the new version and here is the result.

  Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible: "view > toolbars".

  • Is he missing elements then open the window customize via "view > toolbars > customize" or "Firefox > Options > toolbars»
  • If a missing element is located in the toolbar palette and then bring her back in the window customize the toolbar
  • If you don't see an item on a toolbar and in the toolbar palette, then click on the "Restore default" button to restore the default toolbar set up.

  See also:

  • http://KB.mozillazine.org/Toolbar_customization
  • https://support.Mozilla.com/kb/back+and+forward+or+other+toolbar+items+are+missing

• Not able to boot after that windows update, just trying to install the number 3 setting 3, and then restart the computer. With the help of Windows Vista SP2

  Friday morning I wasn't able to boot my computer more. When I start my computer it won't seek to set a parameter nr 3 of 3. And then it restarts again. My computer tried to install some windows update settings the day before with no success. I Don t remember what it was. I got Vista SP2

  The same problem happends to my computer from friends four days, after she start a windows update installation. But it has solved its problem by using the Windows installation CD and use the repair tool.

  For me, my Windows installation CD I got from Dell does not work. Not the tool repair or startreparation. And I have no reference system to return.

  What should I do? I don't want to reinstall windows again, I have a lot of information on the computer I need to.

  All the world has noticed this problem?

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the ISP above Mathods to solve your problems, save your data using one of the methods below, and then reinstall Windows:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  I got an error message in step 2 of configuring updates - "updates were not correctly configured.  Returning from changes' anyone can help solve this problem?

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

• I bought a LR 6 update. I received the order number and the serial number by email from Digital River. However when I try to activate the product I get a message error "we cannot validate this serial number.

  I bought a LR 6 update. I received the order number and the serial number by email from Digital River. However when I try to activate the product I get a message error "we cannot validate this serial number.

  Hi avijitm,

  You are using a Mac or Windows computer?

  Make sure there is no hosts blocking Lightroom entry onto the Adobe servers.

  Follow solution 3 referred to in article Solutions to connect, activation and errors in connection with creative cloud and Creative Suite applications

  See Error failed to validate the serial number | CS6

  Let us know if that helps.

  Kind regards

  Assani

• Just updated for first elements 13 took a film and tried to apply instant film. I get a dialog box called "Adobe first Elements.exe - no disc. I have not all discs, because I downloaded this update. A ran the same film and feature on Eleme

  Just updated for first elements 13 took a film and tried to apply instant film. I get a dialog box called "Adobe first Elements.exe - no disc. I have not all discs, because I downloaded this update. A ran the same film and function on 12 items, it has worked well. I reinstalled the 13 items that was no help. Note it is very difficult to get rid of this box, it crashes the program elements sometimes

  mnicolett4

  What operating system is involved? Assuming that Windows 7, 8 or 8.1 64-bit for now.

  There is a known No Disc error associated with the elements first 13/13.1. The Adobe fix is the removal or disabling of the OldFilm.AEX file. Let us determine if this applies to your situation.

  The file OldFilm.AEX that you remove or disable renaming in OldFIlm.AEXOLD is located in the path of 64-bit Windows 7, 8 or 8.1 of

  Local disk C

  Program Files

  Adobe

  Adobe Premiere Elements 13

  Plug-ins

  Commune

  NewBlue

  and in NewBlue folder is the file OldFilm.AEX that you remove or disable renaming in OldFilm.AEXOLD.

  Please let us know if it works for you.

  Thank you.

  RTA

  Add on... Have you updated 13 to 13.1 still using Help Menu/updates to date of an open project? If this isn't the case, please do.

• Completely updated my BC hosted the MUSE site.

  Hello.

  I had my MUSE site site works now for several years (www.thinksmartresumes.com.au). I published this through BC as one of my five free hosting sites.

  I have now created a new MUSE site (http://pauldean.businesscatalyst.com). I want to completely replace the old site with the new site.

  Now, this might be a stupid question, but simply select (site direct current) reality in the ' publish on ' drop down on the dialog box "publish"? Complete BC will delete the old site and replace it with the new.

  I fear that all this seems too easy? Are there other steps I have to take?

  Thanks in advance. Paul.

  

  Hi Paul,.

  The easiest solution for this is to create a 'new Site' of the menu drop down. Once the site is published, you can redeem as your site for free and add your custom domain.

  Another way is,

  Select the site, as the screenshot above, in the "Upload" field, select "All Files" and click on publish. Muse will now replace the old content on the site with new content.

  Let me know if you have any question.

• Windows Explorer has stopped working... then restart... only when I try to delete something!

  I'm running Windows Vista Business 2007.  I have not had problems with my computer until my computer has been infected with the Malware last week.  The malware has been removed.  The problem I have is when I try to delete a file, the shortcut on the desktop or do anything, I get a display box that appears and says "Windows Explorer has stopped working... Windows is looking for a solution to a problem." Then another presentation box appears and says "Windows Explorer restarts... "and it restarts.  The file will not be deleted. I tried to delete files in multiple places and using several methods of deletion (button Delete, right click and delete, move, delete, etc.)

  I tried many actions listed on the support forums and nothing has worked yet.  When I first upgraded to windows I had to turn off user account control because it was originally the System unstable and would not allow updates to install. I made on and off again, but it does nothing to help with that.

  ANY INFO on my problem would be greatly appreciated!

  Search for malware that were missed, as suggests.

  Many times when someone experiences this problem, it may be due to add-ons explore or shell extensions. Consider using Sysinternals Autoruns or ShellExView. Disable Add-ons and non Microsoft shell extensions and verify the behavior.  If he went, reactivate the disabled extensions/add-ons, one at a time and see if you can identify who may be liable.

  Try a clean boot, or boot into safe mode.  The behavior persists?

  Another option could be to consider the establishment of the hierarchy of the following registry keys in the registry:
  HKLM\Software\Microsoft\Windows\Windows error Reporting\LocalDumps\explorer.exe\
  In the explorer.exe key, create a REG_EXPAND_SZ value named DumpFolder and set the value to%systemdrive%\localdumpsdata.  Ensure that the %systemdrive%\localdumps file exists, and then cause the crash to happen.  It must be a dump file in %systemdrive%\localdumps. Download the dump on your SkyDrive file and provide a link.
  (Letter is an environment variable that represents the system drive, usually C:.)

• Microsoft is convinced that I'm Thai and instructs all links to thai-language MSN sites and sends me emails in thai.

  Original title: the thai language at Microsoft

  I'm British.

  My email is @hotmail. Co.UK.

  I bought my laptop in England.

  Microsoft is convinced that I'm Thai and instructs all links to thai-language MSN sites and sends me emails in thai.

  How can I fix?

  Hello

  Thank you for the update.

  1. What are those Microsoft e-mails that you receive?

  2. have you contacted any Support Microsoft before?

  You can try to change the language setting on the MSN (MSN selection worldwide) site in the United Kingdom and check if it helps.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.