I've updated windows and now my computer does not connect to the wireless network.

Similar Questions

• My computer does not connect to the wireless network

  My computer does not connect to a wireless network. It's almost like there is no WiFi. I go into the settings and nothing is. I know that the networks are there because the other computers connect to it. He says always "no connection available. When I try to pull of boredom he tells me to plug an Ethernet cable, which is the thing that I try to avoid. I want to connect to WiFi.

  Based on this information, your laptop isn't wifi, it is turned off, or it is broken.  A wifi used to work?  If so, what happened to your system, just as the problem started?

  Type "Device Manager" in the search box and press ENTER.

  • Look in the Device Manager to the network adapter section.
  • What devices are listed?
  • Are there warning icons?
  • It appears to be a wireless adapter, what's his name? Double-click it and to report to what is shown for "State of the device.

  You can also provide additional diagnostic information:

  • Type 'Information system' in the search box and press ENTER.
  • Click in the system information window and select all (CTRL + A) and copy (CTRL + C)
  • Paste (CTRL + V) the data in your response here
  • Return to system information window and click on the + next to "Components", then click on the + next to "Network", then click on 'map '.
  • Select all (CTRL + A) and then copy (CTRL + C)
  • Paste (CTRL + V) the data in your answer below, other data Information System

• CQ60-210US reformatted for Windows XP Prof, but it does not connect to the wireless network...

  Long story short, I tried recently to "downgrade" my husband computer CQ60-210US laptop from Vista to XP.  I followed the very detailed guide posted here and everything seems to work great but my computer does NOT connect to my home network.  It comes as an available network, but when I try to connect it goes on to say that the network is no longer available - is yet to ask security key.  I tried to click on the connection to a neighbor to see what would happen and it seems to go further (it asks me the security key).  I can connect directly using the ethernet to the modem cable.

  This laptop was initially working on my network wirelessly with Vista.  I use a CLEAR 4 G wireless modem.  The signal from the modem is good.

  Can anyone help me identify the problem and propose a solution?  Everything else seems to work well.

  Thank you very much!

  Try to uninstall the Atheros driver, you have now and install another:

  FTP://ftp.HP.com/pub/SoftPaq/sp52001-52500/sp52131.exe

• I recently changed my ISP sky broadband and now my computer does not connect. Why is this?

  I tried all possible ways to connect this computer again to wide band wireless, but it does not connect. All other computers in the House connected without problem.

  Hi Joesafe,

  What exactly happens when you try to connect? You receive messages or error codes?

  You can read the article and try the steps to solve the problem:

  Windows wireless and wired network connection problems

  You can also get in touch with the broadband provider for help on the issue:

  http://helpforum.sky.com/

• I just installed a new router and now my desktop running Windows XP computer does not connect to the internet.

  Hello

  I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.
  Any suggestions?
  original title: connectivity Limeted

  The zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.

  Your messages are a bit terse, but if I understand correctly

  • You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
  • All but one of these computers can reach successfully from the Internet via the router.
  • A computer that can't browse the Internet is connected to the router via an Ethernet cable.
  • You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
  • You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
  • You have installed Windows XP Service Pack 3 (or at least Service Pack 2)

  Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type the following lines and press ENTER after each line

  Netsh reset winsock catalog
  netsh int ip reset c:\resetlog.txt

  Close the command prompt window and restart the computer.

• I worked on the Web site of our Church and all of a sudden my computer does not connect to the site. I get a message saying that the connection to the server was reset while the page is loading. Can anyone has any ideas on how I fix?

  I worked on the Web site of our Church and all of a sudden this week, my computer does not connect to the site. I get a message saying that the connection to the server was reset while the page is loading. Can anyone has any ideas on how I fix?

  The error message "the connection was reset" can be caused by a bug for the attack of the BEAST fix (browser exploit against SSL/TLS) that the server does not support.

  • [918127/questions/918127]
  • [918028/questions/918028]

• Motorola Milestone does not connect to the corporate network after updating to Froyo...

  I've updated my Milestone that is the version of Froyo UNITED Arab Emirates yesterday after a long delay, was really excited all night until I've discovered two problems with my wifi.

  The device does not connect to the corporate network, as my office uses EAP 802.1 x and there is no place to enter proxy where my friends using samsung galaxy s (Froyo 2.2) connect to the network and navigate using the wifi settings advanced to enter the proxy in their device.

  Any help? Please, I beg you.

  Hey Ronald, I've updated by upper about the update saying that UNITED Arab Emirates and EGYPT got last week. Don't know if the Saudi version has achieved, you have the Saudi Version or is it the same in the UNITED Arab Emirates. If his UNITED Arab Emirates you can do it via the PC using Software updater by Motorola...

• Start the virtual machine and wait for WF, does not connect to the computer virtual for Vds (Windows 2008 R2)

  Hello

  See a strange problem with only a Windows 2008 R2 model. When you use the built-in function "Start VM and wait" workflow to start a virtual machine (after conversion from a template either manually, or through workflow) NIC of the virtual machine (I tried VMXNET3 and e1000 times) does not connect to the problem. Vds can be replicated in a different VCenter, so spreading the vds. I also created several models of Windows 2008 r2 and all have this problem.

  If the model is converted and started outside VRO, it gets an IP from and is connected to the VDS immediately

  Tried add/remove the NIC of the model

  Tried to move the comments on different hosts

  Tried to create a new template from scratch

  NOTE: Windows 2012 R2 doesn't have this problem in the same circles, the only constant is the Windows 2008 R2 being started by VRO.

  Anyone seen this before?

  I found this article and it fixed my problem VMware KB: registration or the deployment of a virtual computer model fails apparently a fix a problem in ESX 5.1, 5.5 (I used the option to get around and things are good)

• Installed at El Capitan and now HP printer does not work via the network

  Installed at El Capitan and now HP printer does not work via wireless network

  Open system preferences > printers and Scanners and select the print tab.

  Then the right or control click on the HP printer on the left then click: reset the printing system

• IE 10 and store say computer is not connected to the internet

  Original title: windows store and internet explore 10

  the windows store and internet explore 10 say not connected to the internet and I am someone can help? !!

  Hi Pop Boy,

  Please come back to us!

   

  You said that the connection is limited.

  This means that the PC is connected to the router, but the PC has not been assigned a valid IP address, so you can not actually in the Internet. It can also indicate that a valid IP address has been assigned, but the PC isn't an Internet connection. If you are connected to a home network, try restarting the router. If the system is connected to a domain or a public network, contact technical support for this network.

  Another reference:

  http://Windows.Microsoft.com/en-us/Windows-8/cant-connect-to-Internet

  http://Windows.Microsoft.com/en-us/Windows-8/cant-connect-to-a-network

  If you have any other questions, get back to us at any time.

  We are happy to help you!

   

  Kind regards

• Windows 7 taking a long time to connect to the wireless network

  When I try to connect to the wireless network, it takes about a minute or two.  I didn't have this problem until I updated my card wireless about a week ago.

  Thank you very much.  I think I solved the problem.  I didn't have this problem until I updated my card with the latest wireless.  But I uninstalled the new and re-installed version, and that seemed to solve the problem.

• I recently got an automatic update of Windows and now my iTunes does not... and neither is NO sound at all. Help, please!

  Windows automatic updates from time to time, and since the last of them, not only my iTunes plays not anything... my sound on my computer does not work for anything.  I can't watch any videos/tv shows/listening to music... NOTHING.  Help, please

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  Uninstall software, remove programs and solve uninstalling problems
  http://www.revouninstaller.com/

  ITunes download (32-bit):
  http://www.Apple.com/iTunes/download/

  Download 64 - bit:
  http://support.Apple.com/kb/DL1037

  If your computer has problems play a sound, try using the Audio playback problems resolution to solve the problem. For measures and additional information, see o ink below.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-troubleshooterOpen

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  You have a fluorescent lamp next to your computer which could be emitting a rf? This could interfere with the microphone.

  In Windows 7

  Click Start > Control Panel

  Click on hardware and sound

  Under sound, click on manage audio devices

  Under playback (tab)

  Choose speakers you have in your output device

  Click Properties >

  Click levels (tab)

  check if the value is 100% >

  GoTo Enhancments > select Loudness balancing

  Apply and OK

  Should be much stronger now...

  For enhancment bit,.

  and if you have HD realtek soundmanager (R2.37) in your control panel

  Try a classic Equalizer setting

• Laptop with Windows XP pro does not connect to the home network. Has been fine with the Linksys router. Updated Netgear router again and now will not work.

  Improved the old Linksys G series to new router Netgear N600 - now can't connect wireless or directly with the ethernet cable. Status shows: "acquiring network address" or "little or no conectivity.  Worked through all the options of repairing typical network with no luck.  Also reset router, I tried direct cable modem & shows 'connected icon' but still does not connect to IE.  Another new computer with Windows 7 works great on this network.  What is my next step to repair?

  Use a static IP address and see what happens.

  How can I configure my static IP address?
  http://ask-Leo.com/how_do_i_configure_my_static_ip_address.html

• I just updated Firefox and now it crashes, does not not tabs or add-ons, and the user interface is all messed up.

  I was power off update of Firefox for a while because I knew some of my modules aren't compatible yet, and the main reason I use firefox is because of the multitude of modules. Finally today I decided to go and let it install. As soon as he returns to the top, it's completely different from the way I had my firefox. The buttons are all moved around, each tab has two Xs to close with the back button does not work, there is no way to scroll more tags do not take on the screen and for some reason the firefox button is not collapse in the main beam.

  My session has not been restored, either, which really annoyed me, because I had a very high volume of open tabs. Right now I just want to come back, because I hate what happened, but I know that's not possible.

  I'm sorry to hear that you have so many questions. What version of Firefox you used before?

  The problem of double title bar has been identified as a problem with the extension of the tax Mix Plus but it does not affect everyone, there is an interaction with something else (not exactly what clear although Norton Toolbar has been mentioned in a thread).

  There is a new version available that you can try. If Firefox is stable enough to do...

  Firefox orange (or the Tools menu) button > Add ons > ' gear' icon > check updates

  If your beta version does not update, you can try to install from the Add-ons site.

  More generally, can I suggest disabling the extensions as much as you can live without for 24 hours and gradually reactivate? This should help isolate the interactions between them. As you know, you can do so here:

  Firefox orange (or the Tools menu) button > addons > Extensions category

  Finally, about your old session, if you have not closed Firefox, you could find a sessionstore.bak file in your profile folder that contains your old session. For easy access to this file, try

  Help > troubleshooting information > "view file" button.

  Grab a copy of this file and save it somewhere outside the folder because it is overwritten when you close Firefox. Had to run, but if find you one with a suitable date, a person can help you to restore.

• I installed microsoft excel viewer and now firefox icon does not appear on the saved web pages. It just display the icon "don't know what to use to open.

  Big mistake! I installed microsoft excel viewer
  Firefox icon does not appear for saved web pages. Or didn't save IE web pages. I just get the icon "I don't know what to do with this."

  This has happened

  Each time Firefox opened

  == I installed microsoft excel viewer

  I re-installed excel viewer and the problem is not to be reproduced.
  Hope that this does not come to the time where I re - start.