I want a new Alienware Aurora ALX to have double EVGA NVIDIA GeForce GTX TITAN graphics cards in SLI config. Is this possible with the latest ALX Aurora motherboard has?

Similar Questions

• HP 120-011 to: attach a new Nvidia Geforce GT 710 graphics card to HP 120-011 in

  Hi, I want to install a new graphics card on my desktop pc HP 120-011 in . My office is currently integrated Intel HD graphics 4400 . I recently bought a Nvidia Geforce GT 710 graphics card, but when I inserted in a PCI-E port, the pc is not able to detect it. So here's my questions-

  1. why this graphics card is not detected by my pc?

  2. then the 180 Watts PSU, which is installed on my system to manage this card? If not, should what power supply I buy?

  Its emergency, quick reply pls. Thanks for the help.

  Hi there @Abhishek_India,

  Welcome to the Forums of HP Support!  I understand that you are having problems with an update of the graphics card.  I'm happy to give you a helping hand with this.

  Looking at the map you want to use: GeForce GT 710 specifications, it shows the following: Minimum System Power requirement (W) 300. This means you want to preferably a power supply in your computer that exceeds this amount, just to be sure.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Alienware X 51 RT2 Nvidia GeForce GTX 960 video card upgrade

  Hello

  I have the Alienware X 51 RT2 with 330 Watt power supply and 8 GB Dual Channel DDR3 at 1600 MHz.
  Currently, I have Nvidia GeForce 760 with 1. 5 G GDDR5 accompanying my Alienware X 51 RT2.

  So, I want to upgrade my GPU GTX 960 (4 GB) if possible if not then of 2GB.

  I don't know if this will work and works perfectly with my office:
  PNY GeForce GTX XLR8 960 4 GB graphics VCGGTX9604XPB

  Need of your recommendation. This is a good option, or there is a better option?

  Thank you in advance.

  Because Alienware has not tested or it has given approval. The same happened with the R1 GTX 670 and X 51. The GTX 670 ends up being a GPU supported for the X 51 R2 after testing. In theory, even a GTX 680 could work at the X 51, but you need a little powerful processor (like an i3 or a processor of T).

  PNY has a GTX 970 you can use. As long as it looks like the PNY GTX 970, you good to go. First and foremost, I suggest you look at the sons of the X 51 + GTX 970 before making a decision. Not only those who have proven it works, but those warning as well. Do this first before answer please.

• HP2310i: New (ASUS GEForce GTX 750Ti) graphics card does not not on HP 2310i

  Hi all

  Help, please! I can't get my new graphix card to work with my HP 2310i :-(

  Basic unit of HP: Pavilion

  Model: p6320uk i5 CPU 3 .2GHz

  RAM: 6 GB

  Screen: HP 2310i

  Windows: 7 (64-bit)

  Card: ASUS GEForce GTX 750Ti

  I swapped the old card and put in the new (I know what I'm doing with this as much before). Connect the plug of the correct video adapter for the graphics card is: DVD-D/VGA. Everything turns on and all I get is...

  DVI: NO SIGNAL

  VGA: NO SIGNAL

  I can't add the new GEForce drivers from the disk because it needs the map in situ.

  What Miss me? What can I do? I am doing something stupid?

  Help! :-D

  Thanks Jowler

  Jowler, welcome to the forum.

  You have shown two different models in your thread.  I used the p6329uk.  The reason that the video card does not work is that it requires UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  Your computer was released on January 15, 2010.  Therefore, the GTX 750ti will not work.  The last series of video cards that does not need UEFI was 640 gt.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Want to 750-124 HP: HP 750-124 power PCI for Geforce GTX 950 video card connection

  I oened my HP Envy 750-124 to add a videocard GeForce GTX 950 and 6 pin PCI power cord to power the card could not be found. There is a PCI Express slot present on the motherboard, but no way to connect the power supply Board. So what don't understand me?  Thank you.

  You're welcome, @DFB2.

  The difference in both models, is that the 700-074 craving came with an installed 460W PSU.  That might be enough to run the GTX 950 correctly.  Even some of these PSU is not additional power adapters.  It depends on a lot of other components that are installed in the computer.  Video card manufacturers give room for all situations.  Normally, I would recommend buying a PSU that is at least 100W above the manufacturer stated minimum requirements.  I hope that explains the situation better.

  Here are the Product Specifications for the power supply in the 700-074:

  Form factor: ATX internal
  Total wattage: 460W
  Nominal input voltage range:
  100-127V/3A (50-60 Hz)
  200-240 v/2A (50-60 Hz)
  Dimensions: 150 x 140 x 86 mm (5.9 x 5.5 x 3.4 inches)
  * This power supply has an LED to indicate a possible failure condition when the light is off and the power is connected.

• OptiPlex 3020 - want to install sc evga NVIDIA GeForce GTX 760

  IM wondering if I can not install sc evga gtx on dell 760 3020

  James8349

  IM wondering if I can not install sc evga gtx on dell 760 3020

  James8349

  The EVGA GTX 760 graphics card, is not compatible with the Mini OptiPlex 3020 Tower.

  The EVGA GTX 760 4 GB 256 - Bit GDDR5 PCI Express 3.0 Support SLI SC 4 GB video card requires 500w or more power.

  The OptiPlex 3020 MT supports a power electric Dell exclusive 290w that cannot be upgraded, as there are has no detail compatible power supplies available.

  See pages 19-20 of the operating instructions here:

  http://www.Dell.com/support/manuals/us/en/19/topic/OptiPlex-3020-desktop/OPT3020MTOM-v1/en-us/GUID-9CCD6D90-C1D1-427F-9E77-D4F83F3AD2B6

  Bev.

• New Alienware Aurora R4 freezes every time in 50 minutes

  I just got my new Alienware Aurora and oh joy, my first time owning this beautiful Monster - looking for a machine.  I have owned it now for five 5 days; but the experience so far has been frustration, to put it lightly.

  The machine never stays more than 60 minutes at a time.  It crashes.  When it crashes, I hear the fans always roll the led still under the display theme AlienFX I put and it seems that everything is fine, but:

  1. the SCREEN turns off

  2. the keyboard does not work, systems is not responding to strikes again... as the keyboard is dead.

  3 mouse works now.

  4. nothing works, except the DVD tray that always comes out and in.

  5 only the resolution is to force close it down and then turning it back on, via the power button.

  I just installed MS Office, my keyboard and my mouse.  Nothing complicated.  I've now adjusted the power management to ensure that the disc hard system, display, etc. NEVER goes to SLEEP.  Yet, the machine still crashes as usual.  I'm not even games.  Simply creating a document, or watching a training video.  I even decided to just share my training on the Alienware video file and watch the video from another computer; accidents still Alienware and my video stops.  I decided to disable Windows Update, still problem persists.

  I checked EventViewer for clues, NOTHING.  No log entry for when the system unresponsive.  What kind of a computer is what the hell?  I thought that with Alienware, I won't have any hassles, but this has been an exercise in troubleshooting non-stop for me since I got this computer; It became a distraction, as whenever I sit down to work, I find myself troubleshoot the computer each time.  I'm now trying to force me to forget everything and just use my old laptop; that I supposedly replaced when I upgraded to this Alienware machine.

  It's Sunday today, I intend to call technical support for Dell tomorrow to start the support process.  But to give up some lines here just to get feedback / if there are similar experiences that can shed some light on this problem.

  Please any response that can point me in the right direction will be appreciated.

  Hello

  Yes.  A quick update from my post.  I called Dell technical support on Monday 20 October 2014 and the guys were fantastic.  I spoke with a guy named Bogdan; He spent almost 3 hours working with me on the problem over the phone.

  I'll give you a detailed below:

  At the time that I called him, the computer was no longer able to boot the system.  This is because the previous night, I have run AlienRespawn default factory reset, but the shutdown of PC in the process and then was not start over; and instead showed the blue screen.

  So on the phone with Technical Support, we used AlienRespawn USB backup I had created the first day to reset the computer back to factory default.  And then I connected and put things up so that he can have the remote connection to the computer.  As soon as he connected, the computer decided to die just so :).  So we decided to do the Reboot usual cold.  And once again, as soon as it is connected and looking to run some test, the computer exploded again.

  On the third attempt, the computer remained.

  Bogdan then via a remote connection session, several controls and ran several stress-tests on virtually everything (RAM, CPU, graphics, etc.).  All tests came out, as adopted.  And then we installed software to monitor temperature and other stats like stress tests were running; all readings were really good.  Source of the problem was not yet clear.  We have been jointly shrink on two possible culprits, the graphics card or motherboard (or both in the worst case).

  As we are still brainstorming and then try the AlienFX theme colors, the computer decided that it was time to STOP, once again.  And this time it faced a 6 six sound beeps sound sequence several times.  He did this once before, the previous week.

  The machine had a mind of your own.  It was very random behaviors all the time.  He gave beeps when he wanted to.  He has changed the settings of the BIOS on its own; change the default settings, mode strives / EUFI, etc at random :).

  So we turned and technical support preserved in tests.  He also uninstalled and reinstalled the updated version of the Alienware Command Center.  Even after that, all the readings and the results were perfect, but then Switched OFF the machine once again.

  Makes technical support a call to change the four main components: motherboard, graphics card, MasterBoard and Water-Cooling system for the next day.   So I was expecting an engineer for the next day.  That evening, I decided to install all my software and turn on the computer to a State that is useful for my work and play.

  The morning next day (Tuesday), I decided to continue to use the computer and just keep restarting it out every time.  And then, at some point given around 10:00, he remained THERE for nearly two hours (first time he stayed on this long), I was pretty sure that the problem had gone for an unknown reason.  And to share the joy with my Mrs, the machine went OFF :).

  And this time it's completely DEAD.  It was not turn on anymore.  The LEDs and fan are turning on, but not to life on the screen, the keyboard or the mouse.  It remained so until the Dell technician came.

  To my delight, a Dell technician was at my door at about 14:00, with all the necessary parts.  He was also very friendly and empathetic.  He quickly set to work and replaced all suspect parts.  We went ON and, oh joy :).  The machine came back running.

  He made all necessary BIOS settings and my machine was fully operational.

  I used it for almost 2 days now and no problems at all so far.  It's been great, even if sometimes it's like the trauma remains... I still fear that he might simply turn off on me anytime.  But so far so good.

  So I can say at this moment, the issue is resolved and my device is fully operational.  Thanks for the support.  I hope that my very long story somehow help others who have a similar experience with their machine.

• Upgrade to an Nvidia geforce gtx 1080 on an Alienware Aurora R3

  I was wondering if someone could answer the question of would be upgraded to a Nvidia Geforce Gtx 1080 on an Alienware Aurora R3 or if there is no problem of compatibility or even if someone tried it and it works made me know thank you.

  Hello

  Is not officially supported, but unofficially it should adapt and work (SINGLE CARD).

• I have a Mac Book Pro with a CD/DVD drive.  I want to copy a home made DVD.  Is this possible with iMovie or another application?

  I have a Mac Book Pro with a CD/DVD drive.  I want to copy a home made DVD.  Is this possible with iMovie or another application?

  Look for the hand brake.

  It is a free application which can convert your DVD to QuickTime formats.

• On the new Apple TV 4th generation, can I turn off bluetooth as possible with the 3rd generation?

  Hi, on the new Apple TV 4th generation, can I turn off bluetooth as possible with the 3rd generation?

  I don't think it is necessary for the remote control of Siri.

• I'm told my iPod classic is not compatible with the latest version of iTunes and I need to buy a new iPod

  I have an iPod classic, 160GB, 2009 (I think that I bought in 2011, but they say it's a 2009 version).  I took good care of her, and it worked wonderfully for me.  Recently, with the latest updates of my OS, iTunes, etc. on my MacBook, I got the iPod synchronization problems.  This last time I tried, the iPod has not been recognized by iTunes, or it would be recognized and switch between connected and synchronization, but never go further.  Finally, if I left it long enough that, it would eventually be sync, but then he would go back and forth between sync synchronization, connected and finishing.  After leaving he did that for a while, he would finally come with an error message saying that the iPod could not be synchronized.  Then my iPod was erased at all to this subject (everything is always on my iTunes at least library).  I tried to restore my iPod, which she did, and then synchronize everything again.  He went through the process of synchronization, only to say in the end could not be synchronized.  Sometimes my iPod not even be recognized by iTunes.

  So I called Apple Support and they told me that my iPod software is not compatible with the iTunes software.  Both were up to date, so I think I 2.0.4 on my iPod and 12.3.2.35 on my iTunes.  Apple told me that I can't go back to an earlier version of the iPod software because I have no iPod backups on my iTunes.  Therefore they told me the only solution is to spend $ 400 on a new iPod, which I can't afford to do it, nor have you I feel it's a reasonable solution, since my iPod is perfectly good and I was very careful care of her.

  Is there anything that can be done to make the two compatible?  Can I download an older version of iTunes?  I'll be able to get my most recent iTunes library on the older iTunes?  Should not continue making it compatible, the iPod classic and iTunes since so many people use iPod classic, and they are the only thing like him around?

  I looked in the other forums on the topic, but nothing seems to talk about this compatibility problem and provide a solution.  Someone at - it ideas?  Can you manually manage your music on your iPod, even if the two are not "compatible"?

  Thank you!

  So I called Apple Support and they told me that my iPod software is not compatible with the iTunes software.

  Seriously...?  My 'classic' 3rd gen iPod in 2003 still works fine with the latest version of iTunes and the latest OS X.  Even the original iPod should still work (assuming the iPod itself still works).  Your iPod classic 2009 is certainly consistent.  That support the needs of the person coming back through training...

  When you connect it now, it seems in iTunes?  Are you able to select in iTunes, go to the settings screen, where you see the iPod photo and name in the upper left corner of the window and a box below that?

• I have windows7 64 bit on a computer acer laptop, but I want to change my OS to 32-bit. Is it possible with the same product key?

  Windows 7 64 bit to 32 bit

  I have windows7 64-bit with the computer acer laptop, but I want to change to 32 bit can it is possible with the same product key?

  If you have a retail version of Windows 7, then it is more than likely came with discs both 64-bit and 32-bit. In this case, boot from the 32-bit disk and do a clean install.

  If the 64-bit version has been pre-installed, then you need to contact Acer to see if they have a 32-bit recovery disc.

• Dear Sir, I bought a new computer. I also have Lightroom 6.5 on my old computer. How do I get this on my new computer?

  Dear Sir, I bought a new computer. I also have Lightroom 6.5 on my old computer. How do I get this on my new computer?

  See this link for details:

  http://www.lightroomqueen.com/how-move-Lightroom-to-new-computer/

• Hello. I have a big problem. I have Photoshop, Indesign, Illustrator CS4 and Flash CS5 programs. I bought the programs a few years ago and used on my Mac with version 10.6.8. Now, I have a MacBook with the latest version 10.11. I wanted to copy the pro

  Hello. I have a big problem. I have Photoshop, Indesign, Illustrator CS4 and Flash CS5 programs. I bought the programs a few years ago and used on my Mac with version 10.6.8. Now, I have a MacBook with the latest version 10.11. I wanted to copy the programs on my MacBook to work also on this computer. I copied the folder with the programs 'Programs' and the folder of the "Library / Application Support / Adobe" on my USB key and pulled on the MacBook in the program folder and the folder of Adobe. Then I restarted the computer. When I wanted to start a program, I got with Photoshop, Illustrator, and Flash, the error 6 error message. For Indesign: "Adobe ID missing required files please reinstall missing file / Library / Application Support / Adobe / support /... / ROMAN." TXT ".» But on my old computer I could not find a record of support for the Type in the path to the Library / Application Support / Adobe. And I don't know what I have to do because of error 6. Can someone help me please? Thank you very much.

  Avoid copying files from one computer to the other. It won't work. You run out of hidden files scattered around the hard drive and interrupt the licensing mechanism.

  Uninstall, run the cleanup tool.

  Adobe - Adobe CS5 clean tool

  Reinstall from scratch and enter your serial number.

  Download download install and Installation Help | Download and Installation Help

  They will install under 30 days of testing. Enter your valid serial number to unlock the tests.

• I installed the free trial version of lightroom. For some reason, the develop module is just a blue screen. I tried to uninstall and reinstall. I have a new computer with the latest version of windows etc.

  I installed the free trial version of lightroom. For some reason, the develop module is just a blue screen. I tried to uninstall and reinstall. I have a new computer with the latest version of windows etc.

  Go in Edition > Preferences > Performance and uncheck CPU graph use.