I want to connect to a computer laptop win 7 with a xp pc, but she keep asking for user and pass?

I want to connect to a computer laptop win 7 with a xp pc, but she keep asking for user and pass?

Hi Maysambagheri,

The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would really appreciate if you could answer the following questions:

1. how you try to connect with two computers?

2. What is the error message that is accurate or complete?

3. do not connect you to your Windows 7 laptop as administrator?

4. have you made any recent hardware or exchange of software on your computer before the show?

Please provide us with more information on the specific question to help you to fix as soon as possible.

For reference:

Networking of computers running different versions of Windows:

http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

Tags: Windows

Similar Questions

  • Restore the computer with windows media center, but I am asked for a second disk. I don't have this drive.

    I had a big problem with my computer. It came with windows xp professional installed and it has windows media center. I wanted to restore my computer to its original state. I put in the first disc of the Media Center and it worked very well. He told me to delete disk1 when he did and install service pack 1 disc. There is no such disk included. AM I also supposed to have a disk of windows xp professional too, cause I don't have. Need help restoring my computer. Right now I can't really do anything with it. (Use another computer to write it).

    Install Service Pack 3.

  • Keep asking proxy username and password when you try to connect to the internet at the University.

    Original title: keeps asking for password and user name for proxy...

    Hello

    If I connect to the internet at the University that requires a user name and password to use their internet. As a result, this box appears as such:
    http://www.SevenForums.com/attachments/system-security/41870d1260699450-login-pop-up-Windows-security-Inloggen.PNG
    (my box is in English, I found this picture on another forum that seems to have the same problem). The problem is that this Tin can that appear whether or not I am still connected to the uniwide network! How can I fix this annoying box so boring, all 5 minutes, a little hard to watch an upcoming movie...
    I tried to look at proxy Internet explore and that did not solve it.

    See you soon

    Hello

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:
    http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  • I want to connect to a network printer hp cp1518ni with different versions of windows (win7 & winxp)

    I want to connect to a network printer hp cp1518ni with different versions of windows (win7 & winxp). My pc with win 7 work ok, but the pc with win xp not 'see' the printer on the network. What is the additional driver should I install?

    Thank you

    Hi @OHIMATAS,

    I see by your post that you are unable to network that is connected the printer to the Windows XP computer, but Windows 7 computer. I can help you with this.

    Make sure that the Windows XP computer is connected to the correct network name, not a guest or the other network.

    Print a configuration page to get the IP address of the printer.

    Print a Configuration Page.

    Try and access the printer on the Windows XP Embedded Web server.

    Type the IP address in the address bar of your web browser. (Internet Explorer)

    It loads the page Web has?

    If you are unable to access SAP of the printer, check the IP address on the computer to see if the first 3 sets of numbers match the printer IP. They must match to be on the same network.

    Go to start, type executer run in the start search box, type cmd, and then type ipconfig.
    Check the IPV4 address.
    Now, check the IPV4 address for the printer.
    Do the first 3 sets of numbers match?

    Try and ping the printer.

    In the same window, type ping printers (space between ping and IP address) IP address
    What are the results?

    Run the Wizard add printer in printers and faxes, if you were able to access EWS of the printer.

    Please provide detailed results if you're still having problems.

    Good day!
    Thank you.

  • How can I change the default Google search engine in Firefox 8 Google.com to google.co.uk? Yes, I live in France with a French ISP, but English is my mother tongue and I want responses based in the United Kingdom.

    How can I change the default Google search engine in Firefox 8 Google.com to google.co.uk? Yes, I live in France with a French ISP, but English is my mother tongue and I want responses based in the United Kingdom.

    I use XP Pro.

    You can find on the site of Mycroft Project search engines.

  • I forgot my restriction password on my iPad Air and I want to change some settings in this topic, how can I do this but still keep my original content on it?

    I forgot my restriction password on my iPad Air and I want to change some settings in this topic, how can I do this but still keep my original content on it?

    Sorry, but you can't. If you have forgotten your password for the restriction, you must restore the device to a backup made before the restriction code on the device, or restore it as new.

    Sorry,

    GB

  • my computer keeps asking for my activation key

    my computer keeps asking for my activation key while I installed all the programs that came with my new motherboard - R2.0 P8H61-MLX3 I don't know what my product key even though I looked everywhere directed. looking forward to your help

    Have you tried to restart by phone?

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

    Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
    http://go.Microsoft.com/fwlink/?LinkId=52012

  • DVI tv connects to the computer laptop hdmi.

    Hey guys,.

    I need help because my TV display my laptop.  My laptop is a HP Pavilion dv4 Entertainment PC 64-bit and has a hdmi port (no vga or dvi port).  It is partitioned into Windows 7 (which is my primary OS) and Windows Vista 64-bit (what can I say, retro gaming).  My TV actually by JVC and a dvi port (but no hdmi or vga port).  I also have a hdmi cable to dvi to connect my two devices.

    I tried everything imaginable:

    I've updated my display drivers.

    I made sure that my TV was on the plug-in software component Digitial parameter (tried all other inputs too and those who does not either).

    I tried all the settings in the "Display" section in the Contral Panel.

    I tried all the settings in my 'Intel Graphics and Media Control Panel '.

    My Fn + F4 options also don't make my TV display my laptop.

    I even had my motherboard replaced this year (for a problem of differnet of course).

    I tried every resolution of the screen to find one that is compatiable with my TV.

    I changed the order in which I turn on my two devices, including when I plug my cable to my laptop.

    However, I discover that my Windows Update does not update my windows for some reason any (the update was for a problem with Internet Explorer 9, so it's unrelated)

    But here's the strange thing: my TV can display my laptop when Windows starts up.  My TV will show the start screen where I decide what OS I want (I usually choose Windows 7) and it will display the Windows loading screen after that.  But then it becomes empty when screen dsiplays users.  The only thing I can think is that something is leading to the digital output of my laptop once windows loads.  I don't know what would make this, so if anyone has any ideas I could really use the help.

    Hello

    When you connect a new monitor or TV to Windows 7, it should ask you what you want to do with it in a group called "New display detected." It is an opportunity to adjust the settings as you please and turn on mirroring. If you want to adjust these settings later, you just need to go to the start menu and select Control Panel. When the load control panel, click display. On the left side, you will see a few options. Click "Edit settings." From there, you will be able to make changes as needed.

    Connect your computer to a TV

    http://Windows.Microsoft.com/is-is/Windows7/connect-your-computer-to-a-TV

    Run this Microsoft fixit tools and check if it helps.

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

  • C6380 - computer laptop xp prints with connection by usb cable but not wireless

    Hello

    I have a c6380, which is about two weeks old. Setup worked fine when I put it on the wireless network and everything is ok.

    I installed the software on a vista pc which is connected by cable to my router from sky. This shows very well.

    I installed the software on a computer vista laptop that is wireless and prints well.

    I also have a computer laptop xp. It is also wireless. The software installed without problem. See the printer etc. However, when I try and print, the printer makes noise and pulls the paper, then the screen says it's printing and then nothing happens. The printer stays like that and eventually the laptop shows a failure to print the message. The document remains in the print queue before deletion, and I have to press Cancel on the printer. If I plug the printer with a usb cable for this laptopit prints without problem.

    I ping the printer wireless froom the laptop xp and access the admin screen. It also shows as a network drive in my computer.

    I uninstalled the software that came with the printer, downloaded the hp software to ensure that it is up-to-date and re installed.

    I put the printer with a static ip address.

    I restarted the router as well.

    The router uses a channel 11 broadcast key, wpa - psk and is set to g & b modes.

    Now, it's really really frustrating because the computer laptop xp my wife, is the main reason why we bought a wirelsss printer because she is a teacher and done loads of printing.

    I'm pretty good with pc / networks etc but have now run out of ideas.

    Can someone help me please?

    Thanks in advance.

    Steve

    Hello

    I've actually solved myself, but I'll keep this post here anyway.

    The answer has been upgraded from SP2 to SP3.

    Probably should have thought about that a little bit earlier!

  • 'no signal' when connecting TV to computer laptop presario 900

    Original title: using a television to show the DVD screen is played on a computer laptop presario 900,.

    How can I use my TV screen to show a DVD is played on a presario 900, I connected both with a VGA cable, but the display shows "no signal".

    What do you mean, "I connected the two with a VGA cable. You have more than one TV, you have tried?

    Have you ensured that the laptop is out the signal from the VGA connector? Usually, you press a key (or key combination) to switch the signal between the built-in screen, external monitor, or both.

    It is possible, that you need to go to the display settings on the computer and turn on the external screen, but first check material method.

  • How can I remotely connect to a computer laptop win7 desktop Vista?

    Hi all.  My in-laws just got a new laptop with Windows 7, and I'm stuck doing technical support by phone two hours away.  A lot of problems with that.  First of all, I have Vista and it has win7, so I'm not sure of all the configs, etc.  Secondly, I must have read the screen for me and then try to understand what is happening.  I'd like to just be able to distance in, see the screen and tell them what to do, or simply to take control and staring at me.  Don't know how to do this, however.  Near as I can tell I have remote access enabled on my computer. the laptop is probably not yet.  I have my firewall to get through, and I know that I need to understand their intellectual property.  I will make a trip to their home soon and want to have everything ready for what I put it up so that I'm here.  So, what I'm looking for?  User account, the network permissions, etc.  Any help appreciated.  Thank you!

    Windows Remote Assistance FAQ, here http://windows.microsoft.com/en-us/windows-vista/Windows-Remote-Assistance-frequently-asked-questions

  • Unable to connect to my computer laptop im adminastrator

    Hello cannot log on to my computer laptop im the adminastrator main but im message says unable to connect, when I put the password in?

    Hi erniecoppell,

    Thanks for posting your question in the Microsoft Community!

    I understand that you are unable to connect to the administrator account. I will try to help you with this.

    (1) did you make any changes before the show?

    Method 1: You can check if the same problem occurs in safe mode.

    Please follow the link on how to start the computer in SafeMode below.

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Method 2: I would like that go you through the items below:

    Microsoft's strategy concerning lost or forgotten passwords

    http://support.Microsoft.com/kb/189126

    You can also turn on the built in admin account and check.

    HOW to: Enable the build-in the administrator account in Windows Vista

    http://support.Microsoft.com/kb/555910

    (Applicable to Windows 7)

    Answer us with more information, and I will be happy to provide you with the additional options that you can use to get the problem resolved.

  • I can not connect to my computer laptop bios password said diagnosis is illegal LENGTH

    I have a dell inspiron 1501 and cannot start, computer laptop in any mode, which can make, bed illegal length of password of bios error code.

    Hello

    your question has been answered in your other thread in the link below

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/i-cant-log-on-to-my-Dell-Inspiron-1501-error-code/53b7ebed-21b2-43BD-B8DF-e96fe3a5675c

    Here is the content of the response;

    I'm sorry, but the strategy of microsoft in these forums is that without assistance will be given about lost or forgotten passwords

    read the policy at the link below

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

    _______________________________________________________

    Contact Dell technical support on BIOS passwords

    http://support.Dell.com/

    or ask in the Forums of Dell Support

    http://en.community.Dell.com/support-forums/default.aspx

  • I want to connect to my computer for ethernet and my time capsule

    Is there a way to connect my iMac directly to Ether and also use my time capsule for backup and wifi?

    I have my to my Time Capsule ranging cable modem ethernet and ethernet connecting my Time Capsule to my iMac.

  • I'm unable to change the video settings on my TV connected to my computer laptop nv55s Gateway via HDMI.

    I have a laptop Gateway nv55s and I used a Slyvania 32 '' lcd Tv and my secondary monitor via a Hdmi cable. I was out of my house and when I came back the video has not been more appearing on my TV. I went to change my video settings and it detects my TV, but it does not reproduce the image? What could be my problem?

    P.S. I'm not very tech Savy.

    Original title: gateway HDMI NV55S detects the TV but not photo duplicate

    I tried all 3 ports on my tv, but nothing has worked. I started messing around with my wireless keyboard and the keys of my laptop keyboard. Also twirling some cords on the back on my TV and then it worked. Don't know what I was doing, or how I did, but now he works once more. Thank you very much for your help.

Maybe you are looking for

  • 1000 - 1140TU Notebook: replacement laptop compatible battery

    Hello I want to replace my laptop battery HP 1000 but don't know what battery is compatible so I need help with this, if someone could tell me what battery is compatible?

  • PXE - E61: media test failure on 3500 Portgege but can't get into the BIOS

    I canoe get into my BIOS menu.I tried all the keys (ESC, F1, F2, delete, etc), but then I get the message: "PXE - E61: media test failure, check cable for."PXE - M0F: PXE ROM of output. I tried everything, but I can not even access the BIOS menu.

  • Container

    I use variable containers to dynamically discover the c series modules that are installed in the cRIO. I have a problem when I install only a single module. Even if there is only a single module installed in the children property node brings a module

  • HP probook 4530 s Intel core i5

    I'm old enough (bought new in 2011) hp probook 4530 s with intel core i3 - 2310 m processor and I would like to replace in intel core i5 or i7 even if LC. I saw on the internet that some stores sell hp probook 4530 s with processors intel core i5 - 2

  • Android 3.1 updated to version based only on the Xoom (Wi - Fi).

    I know that the update is available for owners of Verizon Xoom, but when it will hold for release on the wi - fi only version? I would appreciate any information about this.