I want to delete one of the tools of my toolbar and the instuctions taking me to 'add ons' is a non-starter, so what's the simple way to do this?

I fell once trial-error on how easy peasy to do this. All my research I continue to take in complex 'solutions' which are not cut.

I do not know if you have a right-click of the mouse, but using either make a right or Mac, Ctrl click (on-click) on a toolbar button or the command should give you short a context menu with the option to remove from the toolbar.

WARNING: Cannot delete the elements incorporated into the address bar without removing the entire address bar.

If something is wrong:

  • Some add-ons keep forcing their buttons on the bar. Annoying, but I don't know of a way to block to do.

Success?

Tags: Firefox

Similar Questions

  • Now, I have two connections to a single site and want to delete one of them. I don't see where I have an opportunity to do.

    Now, I have two login for a site name and want to delete one of them. I don't see where I have an option to perform this task.

    This has happened

    Each time Firefox opened

    Is when I created the new connection

    Delete a saved here password: Tools > Options > Security: passwords: "saved passwords" > "show passwords".

    See:
    Password Manager - don't forget, delete, modify and import passwords saved in Firefox

    http://KB.mozillazine.org/Deleting_autocomplete_entries

  • Windows 7 and install/recognize the problems of printer HP LaserJet P2015 error - USB Device not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

    Title: Windows 7 and install/recognize printer HP LaserJet P2015 teething problems...

    I have a dell inspiron that was originally windows Vista and I changed to windows7.  I have a LaserJet where I work, a HP LaserJet P2015 printer and when I plug in the USB, it says (peripheral USB not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

    How and what should I do to get the printer going or to get the computer to recognize.  Installation CD will not work and I looked online and downloaded drivers but still the same thing.

    Hi LOliver,

    Method 1: Run the hardware and peripheral troubleshooting tool and check if it makes a difference.

    Open the hardware and devices Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2: Disconnect all USB (Universal Serial Bus) devices connected to the computer (unless your mouse and keyboard). Connect the printer and check to see if the problem persists.

    Method 3: Connect the printer to a different USB port and check.

    Method 4: Reinstall the USB (Universal Serial Bus) controllers.

     First of all, please disconnect all USB devices and then perform the following steps:

    (a) click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

    (b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

    (c) repeat step 2 to uninstall all items under 'USB Bus controllers'.

     

    Then, restart your computer and windows will automatically reinstall all USB controllers.

     

    HP printer drivers- ensure that you download the driver appropriate for your device model package.

     

    Thanks and greetings

    Ajay K

    Microsoft Answers Support Engineer
    ***************************************************************************
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. The location is the root (2 ports) USB hub: 1-unknown device and Port 2-not used

    Original title: USB device not recognized

    Over the last 2 weeks, I get a message on a USB device.  The message said that one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  The location is the root (2 ports) USB hub: 1-unknown device and 2-unused Port.  I have no idea what it means.  I hesitated to first click the icon (it does not last very long) thinking it could be a scam.  Can someone help me?  Thank you.

    Hello

    (1) is the specific question of specific USB devices?
    (2) did you of recent changes to the computer before the show?
    (3) have you tried plugging the USB stick on another computer?

    (4) what is the brand and model of the computer?

    I suggest to refer to the following methods and check if it helps to solve the problem.

    Method 1: Hardware devices do not work or are not detected in Windows

    Run Microsoft Fixit mentioned in the article.

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Method 2: USB Port may stop working after you remove or insert a USB device

    http://support.Microsoft.com/kb/817900

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 How to back up and restore the registry in Windows

    Reference:--

    Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

  • one of the usb devices attached to this computer has malfunctioned and windows does not recognize it

    I get the following message when I join my computr "one of the usb devices attached to this computer has malfunctioned and windows does not recognize," my nokia C3
    kindly help

    Most often when a device is not it's because of a driver.  Try reinstalling your.

    It works for win 7 & 8

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

    http://captaindbg.com/how-to-update-drivers-on-Windows-7/

  • received message one of the usb devices attached to this computer has malfunctioned - help please

    I received the error message one of the usb devices attached to this computer has malfuctioned and windows does not recognize.  I removed the hub and got the same message when using devices directly into the computer.  I tested the devices on another computer and why have been recognized without problems.  I tried all the patches as in Device Manager, looking for the software upgrades etc.  Suspect that this has happened when a member of the family visit charge pictures from a flash drive to update his facebook site - I do not know if all programs have been loaded to remove/uninstall but do not know that it would have been the 26th Dec - please help

    Hello Ann,.

    If it is a laptop computer, shut down Windows and remove the battery and the power supply of the PC.

    Wait a few minutes, and then reconnect the battery and start Windows.

    Plugin your device to see if it works, without the hub.

    Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error - "one of the usb devices attached to this computer has malfunctioned and windows does not recognize it

    Original title: USB device not recognized / dysfunction

    "Unrecognized USB device".
    One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. Help for this problem, click this message. »

    This is what I get AFTER that I had to reinstall windows XP because a virus has attacked my computer a little before avg and Microsoft security essentials picked it up and destroyed... I have reinstalled twice... then I changed discs since I have two... well, I get this message from my 2 external Seagate Freeagent and my Phillips mp3 go gear aria... player these devices work on the laptop from my friend and she is under vista. It seems that since then they have worked on my computer before they would always run. My mouse and my cam work fine and my Canon printer gets thus detected... a few readers who have the space that is made... Ive looked everywhere for a solution... even upgraded windows media 11 and is player went to service pack 3. restarted several times... tried dPower Management tab and tried to

    Open recognition of the USB device by using Device Manager.

    .. I am at a loss: P please help thanks!

    isable the power management of the USB hub and I couldn't find the

    Hi LadyDefi,

    You can try to uninstall and reinstall the USB controllers and check:

    To remove and reinstall all USB controllers, follow these steps:

    a. Click Start, click Run, type sysdm.cpl in the Open box and then click OK.

    b. click on the Hardware tab.

    c. click the Device Manager button.

    d. expand Bus USB controllers.

    e. right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

    f. restart the computer and reinstall the USB controllers.

    g. plug in the removable USB storage device and test to make sure that the problem is solved

    For more information, see the following article:

    Advanced troubleshooting tips for General USB for Windows XP problems

    http://support.Microsoft.com/kb/310575

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Error "one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it." when you connect Logitech M225

    Original title:

    My wireless mouse works fine for the last 2 months, now, all of a sudden it doesn't work at all.

    I get a windows notification that says-

    "One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it."

    I have Vista 32 bit OS on my laptop.

    My office has Windows 7 32 bit and I am able to use the mouse on this computer, then the M225 is not defective.

    I tried to look for a download of update on the site of Logitech & only found:

    6.32.20 set - point it did nothing to help.

    I also tried to move the receiver to the other 2 ports USB w / still the same results.

    Are there other downloads or solutions that will help w / this problem?

    You can also try searching for devices strangers (with yellow symbols) in the Manager under the mouse devices and other pointing devices and other devices (if any). Right click and uninstall unknown devices. Then restart.

    Also try the steps below to reset the power of USB:
    (a) the laptop off, unplugged from the wall outlet.
    (b) remove the battery for a few minutes, then reinstall it.
    (c) then restart the laptop.

  • Error USB 'one of the USB devices attached to this computer has malfunctioned'

    Original title: Problem USB on Vista 32 bit.

    I have a 32-bit vista when I pug anything anyone posts USB the same message comes up saying one of the USB devices attached to this computer has malfunctioned and windows does not recognize it. Can someone please advise?

    Hello
     
    Method 1:
    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Method 2:
  • Computer say one of the usb devices attached to this computer has malfunctioned

    Original title: LYNDA CROSKILL

    Why my computer says one of the usb devices attached to this computer has malfunctioned and windows does not recognize it when I try to install a new printer? I use windows 7

    a few suggestions here:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/USB-device-not-recognized-in-Windows-7/8106a712-A13E-4ca5-b82e-c3961cc254b1

  • "One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it." Why it does not recognize my device?

    Some time ago I had a huge problem with my computer (I think that my mother-in-law accidentally downloaded a virus) and I took it to a repair shop where they wiped out completely and replaced the hard drive.  Since I got it back when I try to use my wireless mouse and plug the nano receiver he said 'one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  Why he says this?  And what can I do about it if anything?  I already tried uninstalling the driver and reinstalling, but that did not work because as soon as I plugged it it again once he says the same thing.  So I don't know what is happening or how to fix it.  Please help me!

    Hi Carla,.

    Please go to the Microsoft Community Forums.
    After the description of the question, I understand that you can not use the mouse on the computer wireless.
    Let me go ahead and help you to question
     
    What is the brand and model of the mouse?
     

    Here are some ways you can follow to resolve the problem:

    Method 1:
    Try to connect to other USB port and verify.
     
    Method 2:
    I suggest for the link and follow the steps in the article:
    Troubleshoot a wireless mouse that does not correctly
     
    Method 3:
    Remove and reinstall all USB controllers
    Follow these steps:

    a. click Start, click run, type sysdm.cpl in the Open box and then click OK.

    b. click on the hardware tab.

    c. click the Device Manager button.

    d. expand Bus USB controllers.

    e. right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

    f. restart the computer and reinstall the USB controllers.

    g. plug in the removable USB storage device and perform a test to ensure that the problem is solved.


    I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.
  • I have an After Effects project and I want to re-do edge animate. What is the best way work for this?

    I have an After Effects project and I want to re-do edge animate. What is the best way work for this?

    Hello

    Sorry, but you will probably need to rebuild everything in Animate. Although their timelines are similar in some ways, there is no interoperability between After Effects and animate dashboard.

    Kind regards

    Joe

  • VMware Workstation is unable to open one of the virtual disks required by this virtual machine because it is larger than the maximum file size supported by the host file system.

    I'm transitioning from Windows XP (64-bit) on a new computer with Windows 7 installed.  I undertook to VMWare Workstation 6 7.0.1 in the process.  The problem is with a very large RAID 5 volume on the new system.  It's a score of 5.45 TB (TPG and NTFS).

    When I try to start a virtual machine on this volume, I get the message "VMware Workstation cannot open one of the virtual disks required by this virtual machine because it is larger than the maximum size of the files supported by the host file system.".  This is obviously not true.  If I copy the virtual machine to another drive on the system, it starts without a problem.

    Anyone have any ideas on how to work around this problem?

    try to add this line in the vmx file:

    diskLib.sparseMaxFileSizeCheck = "false".

    Maybe it helps.

    VMDK-type do you use?

    monolithicSparse? -C' is the only part type more?

    ___________________________________

    VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

  • need the simple way to set the computer back to factory settings, and already saved safe data

    need the simple way to set the computer back to factory settings, and already saved safe data

    Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

    They will tell you how to do this.

    Every computer manufacturer has their own way of making recovery disk/s.

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/default.aspx/KB/326246

    'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

    See you soon.

    Mick Murphy - Microsoft partner

  • What is the best way to read this binary file?

    I wrote a program that acquires data from a card DAQmx and he writes on a binary file (attached file and photo). The data I'm acquisition comes 2.5ms, 8-channel / s for at least 5 seconds. What is the best way to read this binary file, knowing that:

    -I'll need it also on the graphic (after acquisition)

    -J' I need also to see these values and use them later in Matlab.

    I tried the 'chain of array to worksheet', but LabView goes out of memory (even if I don't use all 8 channels, but only 1).

    LabView 8.6

    I think that access to data is just as fast, what happens to a TDMS file which is an index generated in the TDMS file that says 'the byte positions xxxx data written yyyy' which is the only overload for TDMS files as far as I know.

    We never had issues with data storage. Data acquisition, analysis and storage with > 500 kech. / s, the questions you get are normally most of the time a result of bad programming styles.

    Tone

Maybe you are looking for

  • HP officejet pro 8500 has 910 with windows vista to abnormal termination that don't resolve

    My printer was given to me and will loop continuously: it starts and displays the progress bar, operates the head printer port. poster 'abnormal termination' and stops and resumes the same loop again and again. I tried both the soft reset and hard re

  • How to handle shared extension webworks reference library

    My webworks extension uses a shared reference library.  The library module is deployed with an agent java application on the device already. In case of native java application, other applications that use this library shared do not overload the libra

  • Using the two RAM slots

    I have 2 RAM slots. I have 1 GB installed on one of these locations. A few months before that I installed a 1 GB of RAM on another location (I gave my CPU to the shop actually to install) and it worked very well. I had some problems with my PC so I f

  • IProcurement Director of catalog schema tab

    HelloWe use R12 iProcurement for 5 years.Just realized that there is a schema tab in iProcurement catalog administrator.How this helps, what is the purpose of this?There are sub-tabs like Upload, the Base descriptors, categories of elements, the hier

  • Export function in SQL Developer

    Hi guys,.I wonder what SQL Developer Library now uses for the export to excel function. What's the jxl.jar, please?Thank you.