I want to divide the partion primary/basic C in 2 small, a C (primary with the OS) and G (extended-for everything else).

Similar Questions

• I want to restore the size of normal printing for everything on my computer. I tried using the page (text size) and it did nothing, can you help me?

  text size problem

  I'm not sure what means 'normal' - I assume that means you had recently but has changed.  Do a system restore to a point at the time the text was the right size and format you want - BEFORE it changed to what you don't want.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days worth of restore points.  If this does not work at first, try a previous restore point or two.  NOTE: You will need to re - install any software or updates installed between now and the point of restoration - but you can make updates through Windows Update.

  As an alternative, you can go to start / Control Panel / customization / display settings / and set the resolution to a different setting.  Click on apply, and it will ask you if you really want to change based on what you see now.  Click on your answer and either output or try another setting.  It is a more difficult way to do a system restore because it is difficult to choose the same size you had before.

  Good luck and I hope this helps. Lorien - a - MCSE/MCSA/network + / A +.

• How to change Windows Sync dividing the folders and files in alphabetical order

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  • Windows Sync has divided the folders and subfolders in alphabetical ranking. I want my old transparent back and stopped synchronization partnerships. The only way that I can temporarily return the old display windows is to change the name of the folder. How can I stop Windows automatically it? Recent changes to your computer. I work towards a date limit and cannot stop windows from doing this and can not find an answer.
  • I have tried going to the Sync Center, but impossible to find a solution. Even tried Sync delete but Windows does not allow this.

  Try turning off the center of synchronization to run at startup as follows: http://www.vista4beginners.com/Disable-Sync-Center.  In my opinion, who will take care of the problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why my ipod touch 5 turn on she used that happened last night I went on netflix for like 20 minutes then I closed it and then I'm gone on it again 5 minutes later, he worked later I hung on it and then I just wanted to check the time and it dint work

  I went to netflix for like 20 minutes, and then I closed and then I'm gone on it again 5 minutes later, he worked later I hung up it and then I just wanted to check the time and it dint work I can't see the screen I have tried pressing the home button and the stopcock one its does not work how to fix it

  Try:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• I want to control the speed and direction of a motor continuous using labview with pwm

  I want to control the speed and direction of a motor (essentially a toy motor) continuous generating a PWM signal in labview. I'm using L293d motor and exit DAQ-9472. Can I do this without the help of any microcontroller but only a simple labview code and the DAQ 9472 output

  There are many examples on how to generate a PWM on one in the buffer, or on a counter, but that does not support this card.  A 8 a cDAQ chassis also a BNC connector that can be used as a counter as well.  These examples can be found in help > example Finder in LabVIEW.

  Also be aware of your current limiting.  This card can drive a decent amount of current, but it has its limits.  You'll want to put an inline meter to see what is current and see how far you get to it.

• Want to rip the cd audio books "s for pc.

  Want to rip the cd audio books "s for pc. How do I use media player, or should I go for another software

  Hi WilliamHillZX,

  Try the following to see if it helps.

  a. open Windows Media Player.

  b. click on 'Tools' at the top of the Windows Media Player window and select 'Options' in the menu dropdown.

  c. click the "Rip Music" tab and click on the menu under "Format". Select 'MP3' in the menu, and then select the check box next to "Rip CD automatically." Select "apply then 'OK' to save the changes.

  d. press the button to open the drawer of CD or DVD from the computer, insert the CD in the tray and press the status bar. Windows Media Player will automatically rip the audio book in the 'Library' of the program section.

• My pcg-7a2l is very slow. I want to spend the cpu and ram. What is the cpu socket and the ram need me it?

  My pcg-7a2l is very slow. I want to spend the cpu and ram. What is the cpu socket and the ram need me it?

  Hello

  PCG-7A2L is the configuration of the equipment donated by Sony code. Try to find the model # begins with "VGNFS6". Check the following link to locate the model #:

  http://eSupport.Sony.com/us/p/support-info.pl?info_id=264

  The option to upgrade the processor is not available. However, you can check if the RAM can be improved. Enter the model # below for specifications of Marketing:

  http://eSupport.Sony.com/us/p/select-System.pl?Director=docs

  Try the procedure described on the following link to resolve problems when the computer is running slowly:

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/39709/c/65, kw/66/39709

  If my post answered your question, please mark it as an "accepted Solution".

• I want to congratulate the subscription and delete the auto-renewal, how do?

  I want to congratulate the subscription and delete the auto-renewal, how do?

  To cancel the https://helpx.adobe.com/creative-cloud/help/cancel-membership.html

  - or answer #1 in https://forums.adobe.com/thread/2023066 - includes a link to Chat from Monday to Friday

• I just make the payment for the license, after using the month trial. and when I want to use the programs and said that I must pay. and received e-mail confirmation of payment, that is not what I do

  I just make the payment for the license, after using the month trial. and when I want to use the programs and said that I must pay. and received e-mail confirmation of payment, that is not what I do

  
  

  Please see the links below.

  • Creative Cloud applications unexpectedly back in the test mode. CCM, CS6
  • Applications creative Cloud back in test mode after an update until 2015 for CC

  Also, make sure you use the right adobe ID to log in.

  Hope this will help you.

  Kind regards

  Hervé Khare

• How to edit a .ai (converted to a smart object) in photoshop.  I want to change the text and changed the text and graphics

  In photoshop, how to change a file .ai (converted to a smart object)?  I want to change the text and changed the text and graphics.

  Total beginner, so need help.

  Thank you very much.

  That must be edited in Illustrator.

• Hello! I have download CC and paid $69.99 but I want to use the programs that I pay for, why, if I pay $69.99, I have to use the test programs? you want to know what I pay and how I can get the services of programs I want to use.

  Hello! I have download CC and paid $69.99 but I want to use the programs that I pay for, why, if I pay $69.99, I have to use the test programs? you want to know what I pay and how I can get the services of programs I want to use.

  Miguelo28272279 for more information on how to solve the connection error preventing your membership to authorize please see sign, activation or connection errors. CS5.5 and later, Acrobat DC.  We invite you to update this discussion if you have any questions about the steps listed in the document.

• If I want to change the body and face what do I need

  Hello

  If I want to change the face and the body what program should I? PL; helps ease

  Photoshop

• Our office has 10 licenses for Adobe Acrobat Pro.  One of our computers crashed so we want to deactivate the license and reinstall on a new computer.  How can we check the serial number on Acrobat Pro installed on each computer to determine which series

  Our office has 10 licenses for Adobe Acrobat Pro.  One of our computers crashed so we want to deactivate the license and reinstall on a new computer.  How can we check the serial number on Acrobat Pro installed on each computer to determine what serial number is now unused?  I don't want to die with the computer software

  Hi John,.

  It is not possible to disable the license from one computer crashed or possible to check which serial number has been used on computer because they are encrypted.

  A retail license is good to be installed on 2 machines. I checked your account and found 4 different serial numbers of Acrobat registered for your account.

  It is always suggested to buy a volume license, if you have more than 2 machines instead of buy 4 different serial numbers.

  I checked all the serial numbers entered and you have sufficient activation count remaining to cover all your machines.

  Kind regards

  Rave

• I want to change the size and color of the text in the call boxes and text boxes. How can I do this? Jack

  I want to change the size and color of the text in the call boxes and text boxes. How can I do this? Jack

  Highlite the text inside the text box and press Ctrl + E.

• I just want to start the program and photo editor. [was: lost]

  I just want to start the program and photo editor. Why am I so lost?

  Exactly my point of view. With all the 'training' and 'introduction' and promotion

  hype about the CC platform, I couldn't even find a way to LAUNCH photoshop.

  Finally I just downloaded Photoshop Elements. Problem solved.

  Your partner in development

  Robert Ott PMP

  Earth Energy Exchange, Ltd.

  631-371-6842.