I want to do a clean install of windows xp on a hp compaq nx6125 but do not all disks with the laptop but I still have the original windows sticker on the bottom.

Similar Questions

• I did a clean install of Mavericks and CC restored from a backup, and can not get one of the applications to load at all.

  I did a clean install of Mavericks and CC restored from a backup, and can not get one of the applications to load at all.

  properly install adobe products.

  at this point, just uninstall cc on your computer, clean by use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6 then install the application of office cc, https://creative.adobe.com/products/creative-cloud

  Use the desktop application to install your programs of cc.

• All disks with the new series of satellites A?

  I searched the Forum from A Satellite and have only found information on the creation of recovery disks...

  I am fully aware that Toshiba laptops do not come out with disks of Vista, but I want to just make sure you Toshiba Satellite comes with NO records of any kind (OS, recovery of the manufacturer, etc.).

  The only reason why I ask is that someone mentioned in another forum somewhere that they don't got no disk Vista, but got the manufacturer for their Toshiba laptop recovery disk... She didn't specify a model, but I was always a little worried. Thus, no Satellite an owners, CD-ROM, or none? I'm sure that there are no drives included with this model, but want to be 100%, just in case I'm missing something and need to go back and get it.

  Thank you, Susan

  Hello

  Toshiba laptops are always delivered only with a recovery CD! The original CD of Microsoft is not provided!

  The restore CD contains an operating system Windows, Toshiba drivers, tools and utilities.
  So, using this CD or DVD you will set the laptop to factory settings.
  This means that the whole HARD disk will be erased and the new OS will be installed.

  I hope I could bring a precision!

• HP laptop 15 15-f305dx: where is the certificate of authenticity and clean install of Windows 10

  I bought a new laptop from HP model: 15-f305dx pre installed with Windows 10 (64-bit), but I can't find the certificate of authenticity. I want to do a clean install of Windows 10 via usb/dvd in the future, but since I don't have a product key that I don't know if Windows ask me the product key or the bios will activate windows when it is preinstalled. I have to go the activation process as those who free upgrade to 10 windows and had it active via wifi or internet?

  This link is where I bought my cell phone for more information and support

  http://www.BestBuy.com/site/HP-15-6-laptop-AMD-A6-series-4GB-memory-500GB-hard-drive-black/4221508.p...

  Thank you

  Your product key is in the UEFI bios not as a sticker on the previous Windows 7 and older models. If you perform a clean installation of Windows 10 o/s must match to your using the factory installed o/s you need to use the new Windows 10 product key to install with.

• Clean install of Windows 7 on Satellite L655

  I have a Satellite L655 and replace the HDD with a SSD (2 sheets) system (more small capacity, 1 partition). I also want to do a clean install of Windows 7.

  I'll be able to use the recovery disc for this? If so, will I have to reactivate? Thank you.

  > I'll be able to use the recovery disc for this? If so, will I have to reactivate? Thank you.

  What exactly do you want: clean windows installation or by using the disk Toshiba recover?

  I mean own installation only the Windows operating system using the Microsoft Win 7 disc.
  This installation requires a valid serial key.

  But using the Toshiba recovery disc requires no any key since the BONES of the window is already enabled on this drive.

• Clean install of Windows 8

  I want HP DV6t. There are some informal activities past in my laptop. So I just want to do a clean install of Windows 8. I don't want to delete my other files on the disc. I just want to reinstall windows 8. I have the recovery disk. What are the steps to follow... ? Someone help

  A clean install of Windows 8 will be erase your other files by definition as recovery disks. Fortunately, Windows 8 has a few new options of Maintenance not seen in earlier versions. You can try a BONE 'refresh' that will install the new system of Windows 8 files without disturbing your data or settings.

  http://www.PCMag.com/Article2/0, 2817,2410848,00.asp

  You want to back up your important files before there is a small chance that it can go wrong.

• Can I save passwords saved just like I want to do a clean install of my MAC?

  I want to do a clean install on my MacBook, but I have a lot of information stored on Firefox, such as accounts and passwords, bookmarks, etc. You is a way to backup all this or I write tham on a paper?

  Hi daku323,

  You should take a look at backup and restore Firefox profiles information. This will give you all the information you need to get a full backup of your personal settings.

  Good luck with the pure install!

• Do a clean install of Windows Vista 32 8.1; advice on the new partition formats.

  Hi, I'm going to do my clean install of Windows Vista 32 8.1 today.

  Need advice on the size for my new partition (s).

  Currently defined as the partitions:

  Total: free:

  OS (c                          99.7G          11.9G

  Data (D G 111, 14.5 G)

  HP_Recovery (E 12.0 G 1.97 G)

  I am running:

  Laptop HP Pavilion DV9700 Entertainment

  32 Vista Home Premium, SP1

  Basically I want a suitable partition for the new Windows OS 8.1 (more room for restore points).

  And the rest of the data area, I guess, as if I had originally.

  Does anyone have any other ideas, because I start from scratch.

  Hi davisj-oaktree.

  To remove the Vista partition, I included the following two links http://bit.ly/1dWZLLn, and http://cnet.co/1dWZQii. Please check the information on each of these websites.

  Good luck!

• Impossible to Vista Home Basic to Vista Home Premium. Don't want to do a clean install. How to get around this problem?

  just bought an upgrade to Vista Home Premium with service pack 1.  I'm upgrading to Vista Home Basic.  The program tells me that the upgrade has been disabled and he wants to do me a clean install.  I really don't want to do a clean install.

  If your installed Vista Home Basic has recently installed Service Pack 2 > uninstall Vista Service Pack 2 for him >

  Do your upgrade to Home Premium Service Pack 1 > then redownload/reinstall Vista Service Pack 2 again.

  And make sure your Vista installed and the upgrade of Vista are the versions both either 32-bit or 64-bit, depending on what is your Vista Basic.

  Click Start > right click on computer > properties > Info is if your Vista is 32-bit or 64-bit Vista.

  See you soon. Mick Murphy - Microsoft partner

• How to do a clean install of Windows 7 Professional of a DVD on the ProBook s 4530?

  So I have Windows 7 Home Premium 64 - bit installed on my laptop and I want to get rid of it completely and to do a clean install of Windows 7 Professional 64 bit from a DVD.
  I don't want to use windows anytime upgrade somehow! Because I have a few serious bugs with my current installation and a clean install, I can be sure to get rid of them

  I'd appreciate if someone could tell me how exactly to do this and if all my data will be deleted. If so, will it download all drivers HP and the software again by myself? :/

  roby1324 wrote:

  Bugs are not serious but they affect several programs and it is impossible to use my laptop, I was doing.
  And no, I have no recovery option, I don't have any dvd with my laptop, or something like that and personally I didn't do all the backups. Which was a mistake that I won't repeat.
  In addition, because of my college, I get a free copy of win 7 professional so why not use it?
  I have already burned on a DVD, now I just need to detail how a facility own n_n
  So after I installed win 7 Professional I just copy and replace Driverstore and C:\WINDOWS\SYSTEM32\DRVSTORE instead of download the drivers?
  BTW, I'll accept your next answer as the snap

  You will use the copied Driverstore and C:\WINDOWS\SYSTEM32\DRVSTORE for is the source of the drivers when you then. Do not replace the folder in the new installation of Windows with the folder that you copied from the initial installation of Windows. It would not be a good idea.

  Once you have done the copy of the file and have it practice you can simply put the installation DVD into the DVD drive and boot from it. There will be a point where asks you if you want to save your previous installation. Say no to it.

  At this stage you can always do a defined recovery disk. I recommend that you do this. This is the copy of the operating system and drivers you purcased your PC with. If you do not want is not a problem like UO can always buy it at HP over the next years.

  Best regards

  ERICO

• Can I do a clean install of Windows 8 (without the DELL OEM software)?

  Hi people,

  I just bought a DELL Inspiron 17R laptop computer which came with Windows 8. I want to install an aftermarket SSD and do a clean install of Windows 8 on the SSD without all the stuff extra DELL piles on the computer in their factory. However, the laptop does not come with any media of Windows 8. My other options (copy windows divide in the SSD or use Windows backup and restore), both result in installing Windows 8 with a lot of software DELL.

  DELL said that they do not have the installation of Windows 8 media and I need to contact Microsoft to get it. Any ideas on how I can go about this? I'm happy to pay a nominal fee for the discs, but having already an OEM of Windows 8 installation, I want to avoid going to the shops and buy a new license.

  Any ideas are much appreciated.

  Kind regards

  Chris

  Unfortunately, your only option is to create a disk backup and restore using recovery tools provided by Dell and use it to reinstall Windows 8. This is especially true because you run Windows 8, which are not available elsewhere.

  or

  SSD of cloning:

  You can clone the installation for the SSD, provided that the SSD is large enough to accommodate the installation to be cloned.

  See

  http://www.ssdfreaks.com/content/664/how-to-clone-HDD-to-SSD-with-Windows-7s-own-software or (easier) use a copy of the trial of Acronis True Image Home.

  Note that, immediately after cloning, you must stop and unplug the original installation. The disc can be reconnected once the DSS started successfully.

• Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Would you like to share why you must do a clean install?

  You can try the recovery of the internet (which will work if your older model has been updated to enable of): hold command + Option + R until you see a progress bar (take a while). It will connect you to the Apple servers. When you see the utility window, choose disk utility to erase your disk and when you're done, choose to reinstall OS X.

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  PS: Correction: I think not yours can be updated; in this case, you will need the original installation disks to wipe the drive and reinstall.

• Question seeks to clean install 10 Windows on the drive of the merger. El Capitan.

  Problem: try a clean install of Windows 10 via the Boot Camp Assistant on an iMac 27 inches (Late2013) with 10.11.4 installs hours (more than 8 hours) and then failed to install Boot Camp updates. Essentially installation take much long than normal and cannot install updates of the Apple software or create normally start Windows Boot Camp 10.

  Background: After problems of slowing down after upgrading to 10.11.4 (with improved Bootcamp Windows 10) who had previously worked fine for 10 months, to the point of a start of OS X time, I decided to do a clean install of my iMac with Fusion 3 to disk.

  As I was unable to remove the partition from Boot Camp through BCA because of his holding always at the same load, I used Internet recovery and reset the Fusion drive. This then required me to repair the partition of Fusion by car through THE "fix" option which seems to work very well. And reinstalled OS X 10.11.4 which works fine now (delays etc..)

  Try using BCA to create a new partition Boot Camp and a clean Windows 10 install after downloading an image of disk W10 directly from Microsoft (Win10_1511_1_English_x64), BCA by downloading software updates and by selecting the desired partition, it began to restart and initialize the installation. However the whole process has been very slow, each step takes much longer than usual, to progress. Leave for hours rest a blank screen or with a circle of rotation.

  I tried with another stick USB 3 and also a USB 2 stick, but none has made a difference.

  In the last attempt, I left running overnight and after 8-9 hours, he finally reaches the top of desktop Windows 10 and the update of Apple Bootcamp starts to load updates. However, he just hung and even after 2 hours, nothing was. Reboot and try once again has been the same.

  After that I tried to create a Windows Installer via BCA 8.0 however it gives just a TPG error when you try to select the drive (due to el Capitan I guess?)

  After four days of efforts, I'm a loser on how to get the Windows 10 on the Boot Camp partition. I can't even install W8 and upgrade due to the error of TPG.

  Any help or suggestions how to proceed with the diagnostic / resolution of the problem would be appreciated.

  Details:

  System: iMac (27 inch, end of 2013), 3.4 GHz Intel Core i5, 16 GB 1600 MHz DDR3, NVIDIA GeForce GTX 780 M 4096 MB, OS X 10.11.4

  • Nothing other than the keyboard and mouse attached via the USB ports, as well as the key USB of BCA. No other attached devices.
  • Reset memory NVRAM, SMC and ran more than once disk utility. No problem not reported.  Ran NVRAM reset before each attempt.
  • At ran EtreCheck report which seemed OK.
  • Verification of diagnosis ran who is childless.

  A detail I noticed after the merger by car there are now two Macintosh HD images when you use boot option. One previously. Are named "Macintosh HD" and "Macintosh HD2". I remember being Yosemite simultaneously in three, but which has been fixed in an update.

  In addition, it seems that no recovery partition. Cmd + R lance Internet recovery.

  Distill the results (the Boot Camp partition removed):

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB internal drive 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk2 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk2

  1: disk2s1 NO NAME 209.7 MB EFI

  2: disk2s2 Apple_CoreStorage TB 3.0 drive internal

  3: disk2s4 Apple_Boot Boot OS X 134,2 MB

  / dev/disk3 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk3

  Logical volume on disk0s2, disk2s2

  7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  Fusion unencrypted drive

  iMac - simon: ~ list of cs simon$ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group CA0B8D0A-6315-4E85-B313-52AB509473F2

  =========================================================

  Name: Internal drive

  Status: online

  Dimensions: 3121237860352 B (3.1 TB)

  Free space: 0 (0 B) B

  |

  +-Physical volume 5E75EE74-EE1F-4FCB-A0C5-9ED5517FEB93

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 91D639D6-634E-47C1-AFE5-616CE12E71E0

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk2s2

  |   Status: online

  |   Dimensions: 3000249008128 B (3.0 to)

  |

  +--> Logical volume family EE9934AC-F3CB-4101-ADB6-576F4371B4B9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  ---------------------------------------------------

  Disc: disk3

  Status: online

  Size (Total): 3106705375232 B (3.1 TB)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  Summary:

  Q1: Should it take 4 + hours to install Windows 10 via BCA?

  Q2: Al must ultimately be so slow when initially W10 desktop?

  Q3; What I do once I arrive at the office of W10 but it automatically updates the graphics driver as BC update is simply suspended for centuries and get a working driver to restart at least W10?

  Q4: is there a problem with the disk HARD the Drive of Fusion that is causing all this delay and slow install / boot? ON the clean install OS X 10.11.4 it is back to be fast as usual and all tests show things are OK but W10 goes on the part of the HARD drive. No way to verify this beyond diagnosis or Etrecheck?

  Q5: Y at - it no problem with the GPT / MBR that may be causing the delay etc. ?

  Q6: How can I use my existing WindowsImageBackup backup from the previous W10 with the BCA install usb drive or how to create a USB stick otherwise recovery disk with my other single Mac have W7?

  Q7: How can I install W8 as I once did on Yosemite, via el Capitan without a mistake to TPG on selection of disc?

  Details:

  Day 5. Attempt at 6.

  Partition Boot Camp delete and try again install via BCA. First question, is that when the startup it goes to a blank black screen. For a time nothing left. Reset then using alt to select windows training results in almost instantaneous startup of the BCA message created and the beginning of the installation.

  4 1/2 hours from start of Windows 10 initial signature window.

  Then the second question. One to reach the Boot Camp update Office tries to start and install the drivers. Allows you to "list files...". "stage then sits at the bar about 5% green for 1 to 2 hours and does nothing. All actions in the Office of the W10 takes ages.

  In the meantime, auto update of the W10 appears a message saying that the updated graphics drivers as one of the few messages or actions during this period. Looks like Nvidia install with the entire package of experience (unwanted) etc. and very probably not the correct gpu driver.

  Finally deciding to cancel the installation of BC by killing the Setup.exe process. Then copy Boot camp install files on the desktop. Lasts 30 minutes to copy. Run again and this time, although taking 15-20 minutes to download and install later with the success message.

  Check the graphic driver it shows a yellow exclamation mark, so the following Microsoft instructions I use the uninstall option via the device and then Manager (slowly) come on board to load and download the latest Nvidia driver on their site for the GTX 780 M for 64-bit W10 etc. The same thing that I had used previously. Slow with running the Nvidia Setup program again, but eventually it works only to say that he could not install as unrecognized graphics device...

  He ends up with Microsoft PnP driver so it's at least sufficient start and run it again BC of the figure updates as all other drivers have been installed. To restart, but I get an error of K-Mode that is most likely related to this driver graphic and not possible to start in the new W10 Boot Camp partition after 7 hours.

  I have a picture of W10 backup recovery (WindowsImageBackup) I've had in a few weeks, but it will not install bet for the installed W10. I try with the ACO created the USB windows but can't seem to get a way to get into recovery mode and to get the menu to install it. I don't have a way to create a USB W10 recovery key now because my other Mac has just installed W7.

  Finally I tried to count a reset of the Recovery boot up option but it seems that it will take longer to start.

  I also went to the recovery and selected Boot Mode safe, but it opens on an empty black window and he's here doing nothing.

  Looks like I'll have to restart on via BCA and reinstall and try and solve the problem of graphics in order to install driver updates from BC and restart to W10 and hope that with the drivers, it returns to the operation and the normal starting time. Then update the gpu driver.

  I used and installed Boot Camp several times with over the years including previously an upgrade of W8.1 > W10 I used for over 6 months without problem. I've never known these installation very long or ice once in Windows even for the initial start upward.

  For any help or suggestion would be appreciated, and this seemingly simple process has now expanded to five days.

• error message iTunes displays locked drive, itl locked files, or do not have administrative privileges on the PC after a clean install of Windows 10

  Yesterday I did a clean install of Windows 10 on my PC with a backup of the hard disk external. I downloaded iTunes, but get an error message that the drive is locked, the .itl files are locked, or I don't have administrative rights to these files. I deleted and reinstalled the PCI DSS several times correctly in the PCI slot hoping that would be a solution, but to no avail. I am the only user on this computer and do not have administrative rights. Any help you can offer will be appreciated. Thank you

  This can help (from turingtest2):

  Fix iTunes for Windows security permissions

• Pavilion 14 G6S71UA #ABA: I'll always be able to use the pre-loaded software HP products if I do a clean install of Windows 10?

  I have a laptop 14 flag that came with Windows 8.1 - 64 Home, and I have upgraded to Windows Home 10-64. The upgrade went very wrong, but I would use Win 10 if possible. Microsoft recommends that I have to do a clean install of Windows 10, which will require you to reinstall all my programs MANY. They cannot tell me, however, if I'll still be able to use some of the applications delivered HP pre-loaded on my machine and that I find very useful - even if I am out of warranty. For example, I use HP Support Assistant updates the driver, and I found that HP DriveGuard works really well!

  I'll always be able to download all of these products and hence? I'll be able to get them on the page of the drivers for my laptop? If I can't, I'll probably have to settle for return to Windows 8.1.

  Thank you.

  Because the rep on the Microsoft forum did not answer my questions, today I called the support of Microsoft Windows 10 phone number. After that the rep is lost another hour of time my (and their) me browsing to enter SafeMode via several methods, everything I told him that I had already tried. the representative suggested that customizations of account that I had applied could be the cause of the distress.

  She also informed me that, for security reasons, Windows 10 no longer allows connectivity Mode Wireless safe; Although, if your PC is physically connected to the modem/router, you should be able to enter in IE (and maybe even in Edge) in Safe Mode.

  So I added a new local administrator account (that said, I log in with a password and not with one account Microsoft.), to be used only for safe mode and left all its parameters to the default values for Microsoft. And it worked! When connected to my router, I could get in Mode safe mode with internet connectivity via IE! Thanks to this rep, I finally have success.