I want to Exchange my hard drive of my iMac for one SSD. Existing hard drive will be cloned on the SSD. I have CS 3 Design Standard installed. What I have to deactivate/reactivate CS3 or will keep the data license/activation?

Similar Questions

• Computer is not accessible due to a hard drive damage, how to disable the CS5 license?

  Computer is not accessible due to a hard drive damage, how to disable the CS5 license?

  When you click on "Contact us" on this page: Activation & deactivation help

  You will see the chat option listed.

• Pavilion 15-ab057nr: How can I change for one SSD HARD drive and update my RAM?

  Hi, I would like to change the hard drive of my computer (Pavilion 15-ab057nr) for one ssd and also add another module of RAM. The problem is that I've never opened a laptop before, and I don't know where to start, or what should I do after I opened the computer. I don't know if anyone could help me by giving me a guide on how to perform these upgrades, every little detail would be useful. Thank you.

  Hi @IYMF,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the HP Pavilion Notebook - 15-ab057nr and tried to help you! I looked in your question about upgrading the internal hardware. I understand that you are looking to upgrade your hard drive to a Solid State Drive, as well as adding another module of RAM.

  Here is a link to your Service Manual. You can find the specifications for compatible discs on page 49. Please note that this laptop model doesn't support that type hybrid Solid State Drives.

  Maintenance manual, page 55, there will be a list of the size of RAM supported, but also a guide on the replacement of the RAM. Up to 16 GB of RAM may be supported in a 8GB x 2 configuration.

  On pages 46 to 50 of your maintenance manual, you will find instructions on how to remove the rear panel of the laptop, as well as, instructions on the removal of the original hard drive.

  I also found this Vidéo Guide giving visual aid on the replacement of the hard disk. The model of laptop in the video is not exactly the same as the model that you have, but it can provide assistance, however.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.

• For one SSD HARD drive swapping

  Permutation of my HARD for one SSD drive

  Dear people;

  I recently bought a Dell SSD to swap with my HDD on my Studio 1558, Windows 7, 64-bit failure.

  What I needed to know, is the image of the system will be enough to transfer all files and program, so the OS on the SSD. As much free disk space is concerned, I have more than enough to copy on.

  I am concerned about Microsoft not to validate the transfer of Windows 7? I also have an OS drive that Dell sent me. Wouldn't be better to use it instead of the image of the system?

  I thought that I would make sure I do that when the hour comes-any day now.

  Thanks for your time.

  dwdraw2

  You must install windows from the installation media, and then reinstall all your programs and files. System images are only to reinstall on the same disk or a disk of size even. There is no problem with the license. This isn't for the computer hard drive. Reactivation should not be a problem, but you might have to talk to a person to explain the replacement of disc.

• I currently have Adobe CS5.5 Design Standard installed on my work PC (I own my own design and printing company) and now I want to upgrade to Adobe CC 2015. I read on the forums that you can install programs on 2 PC and be abl with 1 business license

  I currently have Adobe CS5.5 Design Standard installed on my work PC (I own my own design and printing company) and now I want to upgrade to Adobe CC 2015. I read on the forums that you can install programs on 2 PC and be able to work on both (but not simultaneously) with 1 business license. Is this possible? I would like to be able to design at work and at home.

  Yes, you are allowed to have the software enabled on both machines (you can install on as many as you want) but can have only one of them using the subscription at the same time.

• How can I open an HP Pavilion 11 360 to change the HD for one SSD!

  Hello

  I want to replace my hard drive on my HP Pavilion 11 360 to a HD for one SSD!

  I have removed all screws at the back and could lose the ofalluminum keyboard (away from the screenside) underside of the red plastic by pushing through the screw holes. But the side with the display of all stucks because there are still some screws in place. Are there screws hidden somewhere or is there a Nicolas how to open on the side of the screen?

  Thanks for the help!

  Hello:

  There is no accessible parts of client to be removed and replaced.

  Here is the link to the service manual if you not him have not read...

  http://h10032.www1.HP.com/CTG/manual/c04153107.PDF

  Hard Drive R & R procedures are in Chapter 5 beginning on page 36.

  You have cancelled the guarantee of your actions.

• Photoshop at$ 9.99 CC is valid for one pc... or I can run on the same account?

  Photoshop at$ 9.99 CC is valid for one pc... or I can run on the same account?

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)

  -An individual account is for one person and may not be shared with anyone else

• I paid for a subscription to 299 rubles for 3-4 days. When you try to load the Photoshop license "subscription not found" report

  I paid for a subscription to 299 rubles for 3-4 days. When you try to load the Photoshop license "subscription not found" report

  It is the main cause of the problem, entered URL Adobe with loop back address, thanks to which the activation request is unable to reach the Adobe activation server.

  We need to reset the Hosts file or manually remove entries from the hosts Adobe.

  You can check the link below. :

  https://support.Microsoft.com/en-us/KB/972034

  Let me know, if you need assistance.

• Add hard drive VCSA 5.5 to the data store

  I do the jump for especially vsphere client of web & VCSA 5.5 to change settings on a virtual machine on a host in a data center. The host has 2 data warehouses. The virtual machine has 1 hard disk assigned to datastore1. I go to add HDD to VM but can't find where datastore2 go through them.

  Non-Web client Vsphere 5.1 has allowed the addition of material. The wizard showed a location-> specify a cluster datastore or datstore. And then go to datastore2.

  If you have any information leading to the resolution of this problem, I got thank you.

  PatrickAZ

  Patrick,

  First, to add a new disk to a computer virtual, the data store where you create the disc must be visible to the ESXi host where VM works... If this is the case, follow the procedure in documentation ESXi: Add a new hard drive in a VM in the Web Client vSphere

• VMDK is not displayed when you add the drive but shows on browse the data store

  This may be a simple solution but my forehead hurts to hit my head against the wall and need your expert help.

  Environment: running ESX 4.0 with 4 nodes in the cluster.  Each node in the cluster has only one HBA card with double fiber connections that connect to both sides of FC SAN.  There is not a fiber between nodes and SAN switch, so direct connect.  Built two systems to support Exchange 2007 using the CCS.  Using a FC SAN to shared disk space and iSCSI for disk space not shared.

  Problem: have added 5 player glow spaces on System #1 using RDM and they appear.  Try to load the same readers in the System #2.  I am able to load 4 readers in the System #2 but the 5th disc (which is in fact the reader 3rd in the series) refuses to show when I added the player.  The change settings - & gt; Add Hard Drive - & gt; Use the existing - & gt; Open the data store and the folder where the virtual machine from the system files and the folder where the LUN mapping lie as they are stored with the system.  But at the opening of this file the LUN mapping in question is absent.  All others appear.  However when I right click to browse the data store outside of the settings and go to the folder where the LUN mapping for the virtual drive and it appears.

  Attempts to resolve:

  (1) have removed the drive and delete system #1 data store and we readded to the system = & gt; nothing.

  (2) removed the disk without delete system data store #1 and it added (thus creating two virtual disks in the file for the system to the same LUN... xxx_3.vmdk and xxx_7.vmdk) = & gt; without success.  (xxx_3.vmdk, nor xxx_7.vmdk appear when trying to add a player)

  (3) tried to use a system not intended within the CSC Exchange cluster, attemtped to add the xxx_3.vmdk or xxx_7.vmdk and both appear as an option.

  I am at a total loss.  Do I need to trash the system no. 2 and rebuild?  Is there a problem of possible system configuration #2 that does not allow him to see the two virtual drives?  The #2 system configuration is corrupt?  Do I have to power System #2 power on and off and then try to add readers?  I can the virtual cycle vCenter system?  Or I am much more of a noob that the answer is with myself and I can't see it?  Any help would be welcome.

  When you want to use RDM on hosts, please make sure lun the same number on hosts.

  for example you have assigned the lun 3 host A storage, make sure that it is also the lun 3 to host b.

  Let me know if it does not

  Binoche, VMware VCP, Cisco CCNA

• RND4000 - change the hard disks, will that erases data on older players

  I took out the old records and set it asside.

  Then put in some different readers. Different drives are from a NAS RNDX4000 and they initialize automatically.

  I wasn't expecting that.

  Now, if I take on different disks and put the old disks in will I lose all the data?

  I need to still get the data on the old disks. They worked very well.

  I don't want them to be initalized.

  The reason is that the RNDX4000 was struck by lightning. Really wanted to get information out of thoes readers. Now, I don't want to lose the information I had in RND4000 work.

  OS 4.x ReadyNAS all begin with the formatting of disks when they are hot-inserted and in many cases even when they are not hot-inserted.

  But if you turn off, insert the old disks in their original locations, and then powered on, then the system should simply repeat the operation without loss of data or reformatting.

• Add the date of activation of the system of detention of intrusions and Cisco ASA FirePOWER

  Good evening

  I want to add detention system intrusions to Cisco ASA FirePOWER license (with I.P.S, protection MPAs., Apps and URL). Is possible that? I have to buy another license or only (not free) upgrade?

  the start date of the firepower Cisco ASA license-protection starts from the purchase date or from date of activation/installation on router ASA5506-X?

  Hi again, my responses below:

  (3) the L-ASA5506W-TAMÁS = is the correct part number if you are looking to get the model of 5506-X Wireless ASA. Don't know why ours (CDW) site has not listed :) However, we have listed promotional SKU: L-ASA5506WTAMC-1PR. For more information, I suggest that join you your CDW account manager. If you are not a customer CDW then I would suggest that you contact your local Cisco partner dealer

  (4) here's the datasheet FireSIGHT:

  http://www.Cisco.com/c/en/us/products/collateral/security/firesight-Management-Center/datasheet-C78-736775.html

  The device can be virtual or physical

  5.1) IOS-base-2960 - I'm not sure I understand the question. Can you elaborate a bit more on what you're asking here?

  5.2) I.D.S. requires no additional licenses. It is part of the solution if you buy above subscriptions. The main difference here is that IPS (Intrusion Prevention System) is deployed in line and he will drop the traffic/connections if a malicious activity is detected. IDS (Intrusion Detection System) is monitor only. Thus, if the malicious traffic is detected, firepower will alert you to this topic but he will drop all traffic.

  3DES/5,3) AES will be included at the time of the references you listed.

  Thank you for evaluating useful messages!

• HP Officejet 5746 e-all-in-one: HOW to connect android phone randomly to print the data of the phone?

  I have Macbook & Office XP connected to the printer (HP Officejet 5746 e-all-in-one printer) necessary to connect Random cell phones to print the data.  All directions?  TIA Doc

  You need a wireless setup to print from Android phones.

  Please see this link for mobile printing options available:

  http://www.HP.com/go/mobileprinting/

  WyreNut

• Adobe is unable to validate the serial number for CS6 Design Standard. What's not?

  After purchasing and downloading and installing the package CS6 serial number Design Standard are requested. After completing the SN (as sent), I get the following message: "we are unable to validate this design CS6 serial standard." What I am doing wrong

  That entries don't block the product onto the Adobe servers.

  Move your hosts on the desktop file and open it from there.

  Then delete the entries like "127.0.0.1 lm.licenses.adobe.com"(do not all Adobe-related entries).

  Once you have deleted, close window hosts.

  Drag the file back to the etc folder and replace it with the original hosts file... (open once more hosts and confirm that there is no entry of adobe.

  Then try.

• Can I change the HARD drive in my Elitebook 8540w for one SSD?

  Hello

  I have a HARD drive which started making funny noises and I expect to do fast enough. And while that is depressing in its own right, in my view, I better the situation and and put it in a fast SSD instead of the old thing. But before I go and buy the equipment I need to know that it can actually be done. I read another thread on this forum about to put an SSD in the expansion slot (CD/DVD), but I want to replace the main HARD drive. So my best guess is that it is possible, but if there are people here with experience, please guide me in how to proceed.

  I made a backup of all my important files so really the only thing I want to do is remove my old HDD and put a new and then install Windows 7 from disks that followed with the computer.

  I thank very you much for your time and your help.

  Hello

  Nothing don't you to replace an old HDD with a fastest SSD 'modern '. In theory, you can use ANY SDS but on the safe side, please use SSD suppliers which guarantees its product will work as the following seller:

  http://www.crucial.com/EU/upgrade/HP+-+Compaq-memory/EliteBook/EliteBook+8540w+mobile+workstation+%28Quad+core+processors%29-upgrades.html

  The process is very simple (I actually put a Crucial 960 GB to one of my machines today). My suggestion: prior to material things, backup all files/data and prepare a 'big bang' (in my case, I cloned my old HDD so very fast). Please read the following articles for more information:

  http://www.ComputerShopper.com/laptops/HOWTO/How-to-upgrade-your-laptop-s-hard-drive-to-a-solid-state-drive

  http://Lifehacker.com/5837543/how-to-migrate-to-a-solid-state-drive-without-reinstalling-Windows

  Kind regards.