I want to install service pack 3 for Windows XP home, but it is said to save the 1 ft system. How do I do that

Similar Questions

• I am installing service pack 2 for windows vista home edition I get the error not found 0 x 80070490

  I try to install service pack 2 for windows home edition vista, I get the error not found 0 x 80070490 msicexec has an option to make extended logging, but spinstall/help shows all options.

  Split of: http://answers.microsoft.com/thread/82972695-1d12-4a07-9d72-0f9928a68dc1

  Hello

  Apologize for the delay in response. Please see the following article to resolve the issue of Service pack 2 installation:

  Error code 0 x 80070490 when you use Windows Update or Microsoft Update to install updates

  Note: Make sure you back up your data before you perform a repair of Windows installation.

  Hope this information helps. Back to us for assistance.

• Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

  Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

  Hi, Mksethompson,

  What is your model of computer?

  Error message when you try to install Windows Vista Service Pack 2: "one or more system components that require the service pack are missing."

  http://support.Microsoft.com/kb/968279

  Dell issue

  http://en.community.Dell.com/support-forums/software-OS/f/3524/t/19278096.aspx

• After you install service pack 2 for windows vista

  After installing service pack 2 for windows vista on my HP laptop, I started having a few problems. First off the computer would not go beyond the Welcome screen because he showed that an update was the installation (step 1 of 3:0 % etc.) and the computer reboots before finish. It kept the case whenever I started upward, even on safe mode. I tried to restore, but it would never be completed and nothing else would work. Now I can't go beyond the microsoft loading screen because it shows a black flat screen with no cursor. I can't enter safe mode. Help, please. Safe mode only shows the start screen but won't start so I can't access the control panel and tried to boot to the last known successful startup but it failed.

  Hello

  Try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  And there is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  Or you can repost you this link in the Windows Update Forum.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  See you soon.

• Windows update fails to install service pack 3 for windows vista because of this error WindowsUpdate_80070663

  WindowsUpdate_80070663

  Windows update fails to install service pack 3 for windows vista because of this error WindowsUpdate_80070663 if anyone can help me I would appreciate

  Hi Juan CarlosPatlan,.

  Windows Vista has only two service packs. You'll find the troubleshooting steps in the links below useful.

  Reset the Windows Update components

  System analysis tool

  Cannot install updates

  Troubleshooting of Windows Update (same steps for Vista)

  If you are unable to install the updates, provide the following information:

  • The full version of Windows you have installed
  • KB # the update fails
  • The troubleshooting steps you have tried

• AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• where can I get the service pack 1 for windows Vista Home Basic. My media windows palyer will not play DVD with it. I can not get a decoder installed without the service pack. Please help__

  Where can I obtain service pack 1 for windows Vista Home Basic

  Where can I obtain service pack 1 for windows Vista Home Basic

  Hey electric7422

  Click Start then right click on computer

  then left click on properties

  It will tell you if you have a 32-bit version or 64-bit vista

  links below have downloads the standalone vista service Pack 1 for each bit version

  the 32-bit version

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en

  the 64-bit version

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=874a414b-32b2-41CC-bd8b-d71eda5ec07c&displaylang=en

  Walter, the time zone traveller

• Cannot install Service Pack 2 using Windows Vista Home Edition or anything else on the internet.

  Hello

  I tried to download and install Service Pack 2 using Windows Vista Home Edition, or anything like that on the internet without success. According to me, the key word is internet or a block of Vista from the internet to install anything. Many people here get the same error 80070005 for SP2 as I am, but I think that the problem is with Vista, how the system allows any installs or blocks installed from the internet. I suppose that some are able to go through the download process, but installation is where it does not pass through. There are moments where it seems that the installation of SP2 works, but it will fail eventually. Other times what ever happens to the installation process. The same goes for all other downloads and installs from the internet. I am able to install a program that already exists on the computer, so I know that installs works just not the Internet. Do not send me a link to install because it probably won't last through. I may be able to download but installation will not pass by so that the program will not work. I used the words installation and internet a lot for some reason please take account, when responding.

  Thank you

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• I want to install Srvc Pack 3 for Windows XP on a computer that is not connected to the internet. I already ordered the Windows XP3 installation CD. Are there instructions for my situation?

  I want to install Windows XP, Service Pack 3 on a computer that is not connected to the internet.  I have already ordered the CD of installation of Microsoft.  When the CD comes, there will be instructions for people who are upgrading from Windows XP, Service Pack 2 for Windows XP, Service Pack 3 on computers that are not connected to the internet?  Are there special instructions for people with my situation?

  HI V - ron,
   
  As you have already ordered for the CD of Windows XP Service Pack 3, you can install the operating system by following the on-screen instructions on the CD at the time of installation.
   
  However, I recommend you to go through the articles given before you install Windows XP service pack 3:
  Steps to take before you install Windows XP Service Pack 3
  Information about Windows XP Service Pack 3

• How to install Service Pack 1 for Windows Vista?

  Please can someone help me on how to install service pack 1 for vista. I have tried almost everything, but no matter what I try it givng custody me of error codes. When I tried with automatic updates, it says download 0% done but no matter how long I leave it still says 0% done. I want it only on cos I bought the game and it does not load and when I checked for solutions it says I have to install service pack 1, which is impossible.when I won't to updates, it shows me it's there but it won't install it. I also tried tried to install with 5 independent languages, I think it was called and said, but when he got to the end I got another error code my computer came 7201 laptop computer and put aside this 1 problem everything works fine also I just bought this for £79.99 fom a 2nd hand shop have I got it for a bargain or I haven't paid on the side im guessing it is a good deal but I know very few calculates and im not big on their use

  original title: VISTA SERVICE PACK 1 PROBS

  Hello

  wrong forum for your question

  and when repost you it give error code when you use the stand-alone SP1 download

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Install Service Pack 4 on Windows XP Home Edition, need Adobe program to print various Government and the USPS form

  I tried many times to print a simple USPS shipping label today, I could download a USPS 88 page manual, but not the program to print the label or the label.  They say that if I use Windows XP Home Edition, I have Service Pack 4 or later.  I can't find any reference to Service Pack 4 on Microsoft help programs.
  Now I'm wondering if there is a solution about my fate.  Any advice will be appreciated. Thank you

  There is no service pack 4 for Windows XP.

  The program you want to talk, it's Adobe Reader? http://get.Adobe.com/reader/ TaurArian [MVP] 2005-2010 - Update Services

• I get an error 'Windows Setup is not responding' when I try to install Service Pack 2 for Windows XP.

  Recovery disc to clean the computer.  Discoveries from my software was 2004 I download all 'service pack' and update to restore my computer to where it was.  SP1a downloaded but cannot download SP2.  Now it says "Windows Installer does not" and "run a DLL as an app".  How can I fix without having to pay $ 39.99 for an online business?  There must be a way to solve this problem, so I can use or re - download the "Windows Installer"

  original title: used the recovery disk, downloaded SP1, but cannot download sp2 as error "the installer of windows no longer - run a DLL as an app.»  How can I fix it?

  You can download the Service Pack, a complete package and install in offline mode.  Since you already SP1A, you can go to SP3 directly, bypassing the SP2.  Ingore the text on the following links which indicate that what follows is for "Professionals" and "Network Installation" and download SP3 from the following link and install it after it downloads.  You can download on another computer if you want to move to your current computer:

  XP Service Pack 3:
    <>http://www.Microsoft.com/en-US/Download/details.aspx?ID=24 >

  and in case you want really to Service Pack 2, look here:
     <>http://www.Microsoft.com/en-US/Download/details.aspx?ID=28 >

  HTH,
  JW

• Server did not respond error when you try to install Service Pack 1 for Windows XP.

  I had to do a restore system with xp home edition. Trying to update from sp1 which has been downloaded to the thumb drive and sent to my office at the top of the page. starts to load, and then tells me that the server did not respond. I am connected

  You do not start with a service pack earlier and go to the top. You only download the latest service pack. The latest service pack for Windows XP Home Edition is Service Pack 3.

  Go to Windows Update and see if you can find it there.

  If this isn't the case, then you can manually download it here:

  http://www.Microsoft.com/download/en/details.aspx?ID=25129

  It is a CD image file that requires you to burn to a CD or use a virtual CD/DVD software like Virtual CloneDrive. This allows you to open the ISO file as if it was a real CD inserted into your DVD drive. All you have to do is double-click the ISO file, once you have installed this program. Run the configuration file.

  http://www.SlySoft.com/en/Virtual-CloneDrive.html

• Impossible to download Service pack 1 for windows XP Home Edition

  I just restore my computer and I can't download the Service pack 1, I got error message server response has no answer, what can I do?... I tried several times...

  SP1 for XP no longer exists.

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  FYI

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  The space of hard disk required for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947311

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  Some third-party programs can make a change in functionality after you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947309

  Windows XP Service Pack 3 - file to Image CD ISO-9660:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2FCDE6CE-B5FB-4488-8C50-FE22559D164E&displaylang=en

  Windows XP Service Pack 3 for developers network installation Package and the professionals (unique facilities for the PC can use the same file)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

• Addition of Service Pack 3 for Windows XP Home Edition creates the system failure

  We have an older Compaq Presario that came with Windows XP Home Edition. [a Pentium 1 2005]
  I try to install Windows Live Onecare (free Qwest).  When I update our Windows XP Home with Service Pack 3, when I reboot I get a black screen that says that there is an error with a recent change of hardware or drivers. So I boot safe mode.
  There has been no hardware changes.
  I did a destructive restore by using the Compaq recovery disk which is supposed to wipe the drive and reinstall everything.
  I can update Windows XP with service pack 3 and everything works.  When I install Windows Live Onecare, at the next restart I get the same black screen and need to start in safe mode.
  I can do a destructive restore and load Windows Live Onecare and work without any problem as long as I do not install Service Pack 3.
  I tried to make recovery of Windows with the same results.  I can do a restore before any point where I do not have the Windows Live Onecare and the Service Pack 3 and everything works fine.

  So I guess that there is a conflict between Windows XP Service Pack 3 and Windows Live Onecare on this computer.  I have both works well on other computers in our home network, but they are Pentium III or higher.

  Anyone know if there is a difficulty, or just simply never through my XP Home SR3?

  TIA, LR0451

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.windowsupdate&cat=en_us_d99bb655-a5d5-4C07-bdb0-90caf9f30c42&lang=en&CR=us

  Microsoft.public.windowsupdate discussions

  They will help you in the Windows Update Newsgroup at the above address.
  It's Vista updates Forum...

  XP discussion groups:

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

  Link above is to the XP newsgroups.

  There is a list of groups of discussion XP to the bottom of the left column.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner