Similar Questions

• I want to cut out spaces (bottom) of a ramp, so when I move the ramp to another location, you will be able to see through the cutting of the spaces and see the new view behind the railing

  I want to cut out spaces (bottom) of a ramp, so when I move the ramp to another location, you will be able to see through the cutting of the spaces and see the new view behind the railing

  marvwfactor

  What version of Premiere Elements and on what operating system works - it?

  Video or?

  Waiting for more information, you can apply ChromaKey (an effect of overlay of the effects of the program) to convert the solid color background areas in transparency. The success will depend on the nature of the solid color and how his strong colorrelates to the rest of the colors in the image.

  Please review and consider and provide more information, so that we can give you an answer with substance.

  Thank you.

  RTA

• I want to move the icons on my toolbars, but...

  Day of God at all. I know how to display the toolbar add-on, and I know how to create a new
  toolbar. That's the problem. Several icons on the toolbar add-on are locked in place. I had
  wanted to move the icons, but can't. Why the icons would be locked in place? Is there a way
  to unlock?

  If they are locked then it means that the extension that adds these buttons you cannot customize the buttons.
  
  You can check these preferences settings (options) to see if it is possible to do it this way.
  
  If this isn't the case, then you are out of options.

• We have installed Office 2010 on a system that died & want to move the software for my new system. How to reactivate my product key Code

  We have installed Office 2010 on a system that died & want to move the software for my new system.  How to reactivate my product key Code

  Assuming that you had bought a copy of the sale at retail of Office 2010 (i.e., it not was not preinstalled by the manufacturer of the computer or downloaded and installed using a "product key card"), just install it on the new system and turn on normally.  In some cases, you may use telephone activation and explain the circumstances (i.e., the old computer is dead).

  Microsoft Office is not a step "off authorizes" as some other apps (Adobe comes to mind).

• I want to do a video opening and to redirect to another page after the end of the video, how do?  No matter what widget or code can do?

  I want to do a video opening and to redirect to another page after the end of the video, how do?  No matter what widget or code can do?

  Can do in muse and I tried to use dreamweaver like the code below:

  <! doctype html >

  < html >

  < head >

  < / head >

  < body >

  < style >

  {#video_background}

  position: fixed;

  Bottom: 0px;

  right: 0px;

  min-width: 100%;

  min-height: 100%;

  Width: auto;

  height: auto;

  z index:-1000;

  overflow: hidden;

  }

  < / style >

  < video id = "video_background" preload = "auto" autoplay no Cup >

  < src = "source opening.webm" type = "video/webm" > "

  < src = "source opening.mp4" type = "video/mp4" > "

  This browser does not support video

  < / video >

  < script type = "text/javascript" >

  {document.getElementById('video_background').addEventListener ('ended', function ()}

  window.location.href = ' http://www.xxxx.com';

  (}, false);

  < /script >

  < / body >

  < / html >

  adeletsang wrote:

  Thanks for your reply.

  I just need to click on "object > insert html ' muse and paste the code there?

  My video ID is video_background which is defined by the widget by default, I should change the code below:

  The site I posted has no video in there and I don't have the widget that Peter sugested however, you can replace the startup code Nacy O made (the black with bit blob going around it) and it should work... understand that a ve\ideo will have to be downloaded by your browser clients before they can see it, so it's another delay for them.

  The code you posted is the code of downtime and that seeks a DIV not called "intro" so no do not change his name...

  A mandatory opening text

  After 5 seconds, this block will disappear.

  Everything between the two div tags is startup code and replace you it with you video and then use the muse "object > insert html" tool to place on your page.

  The demo includes three bits;

  • the body or the div tag is the code shown above and goes into the tool "insert html".
  • a header code that defines styles i.e. the yellow background and text... cela goes in your location of metadata page

  

  • The final code is the timeout in jQuery you had but do not change the name to the background image unless you also change the name of your div to match... Nacy O put it in its footer code that is correct for DW, but Muse has no footer as such area so I used a master metadata slot to the same effect. The important point is that it descends UNDERNEATH other codes.

  Have a play with it and see how you go...

• I just want to move a layer of document in Photoshop to another document that has a visible tab in the upper area

  I just want to move a layer of document in Photoshop to another document that has a visible tab in the upper area

  Ensuring that the layer is active, Ctrl (Cmd on Mac) + A to select all. CTRL (Cmd) + C to copy. Switch to the other document. CTRL (Cmd) + V to paste.

• Move the system on another drive partition.

  I have 4 hard drives on my Windows 7 system.  Readers 1 & 2 are defined in a RAID 1 configuration (labeled Disk 0 disk c).  Disc 3 (labeled Disk 1 drive F :) is were the 100 MB Partition reserved system resides.)  This drive has the SMART errors.  How can I move the system reserved on a healthy disk partition?

  Hello

  Thanks for posting your question in the Microsoft community

  After the description of the question, I understand that you want to move the different system for the drive partition. I'll be happy to help you on this question.

  1. What is the accurate and complete error message you get?
  2. What is the letter of the drive for this partition not formatted?

  Let us try the following steps.

  If the 100MB partition not formatted the disk '1' before the C: drive, follow the below mentioned steps.
  a. create a repair disk.
  Create a system repair disc:
  http://Windows.Microsoft.com/en-in/Windows7/create-a-system-repair-disc

  b. create a new simple partition.

  c. assign a drive letter (ex: 'Z').

  d. copy a folder and two files to the system partition reserved current (drive '0')

  Boot

  Bootmgr

  BOOTSECT. BAK

  e. remove the drive letter of the partition 'System Reserved' old ('0' drive)

  f. mark the new "System Reserved" boot partition as "Active".

  g. restart the computer and check if his boot to the desktop.

  h. If the computer does not start, then using the disk repair repair startup.
  Startup Repair: frequently asked questions:
  http://Windows.Microsoft.com/en-in/Windows7/Startup-Repair-frequently-asked-questions

  i. If able to boot to the desktop successfully, remove the old "System Reserved" partition ('0' by car)

  After trying the steps above suggested, giving us the results.

• I just upgraded to 4.0 and want to move the "home" button on the left side of the toolbar. Is this possible? Thanks in advance.

  The 'home' button is off to the right of the toolbar. He moved between Adblock Plus and Abine. It is in a bad place that I turn my cursor to the balloons of the 'home' two mentioned buttons pop-up button. I want to place the button "home" to the left of the address window. Thank you.

  It's easy enough to do, for more details see https://support.mozilla.com/kb/how-do-i-customize-toolbars

• I want to move the folder Program Files to another hard drive.

  I have Windows 7 installed on a small primary partition on one of the two hard drives, double boot with Windows XP.  My installation of Windows XP is on a smaller primary partition (like Windows 7) and Program Files folder on a separate drive logic in an extended partition, not on the system drive.  I want to make a folder Program Files of Windows 7 on the same logical drive, Program Files and move the Program Files from Windows 7 folder to that partition on the second hard drive.

  Just an update.  I finally managed to move 'Users' on a separate partition, so my installation of Windows 7 now has Windows on a partition, the files program on a logical drive in an extended partition, and users on a separate logic in this extended partition.

  On the Windows partition, there are junctions that point to the logical drive Program Files and the logical drive of users and editing the registry to set these default locations.  Windows updates proceed normally and successfully.  Program facilities smoothly and work as expected.  I'll post my procedures on my site, I hope that in the near future, after that I tested and confirmed their on my other Windows 7 machines.

  Be forewarned, however, that this separation will break the ability to repair/reinstall (upgrade on-site) Windows 7.  It will stop when he sees that Program Files not are not on the system partition.  However, in my particular case, I depend on third-party software disk for backup, Imaging for the loss of this functionality (repair/reinstall) has no real interest for me.  Restore a disk image is much faster.

  There are other methods posted on the net to separate these main divisions of Windows during the installation. My methods are intended to guide differently to an existing facility while retaining all the features.  And once again, as shown in this thread, Microsoft Support seems to discourage that kind of thing.

• How to export a user instance data and import it into another instance of a directly without storing the physical file.

  Dear all,

  I need your help I need to export data from user a (1 instance) and import it on another an instance without storage on location.

  I used to do as an export of data about the physical location and then import into another instance where I stored the dump file on physical location.

  Now I don't want to follow these method (standard method), is there any way possible means kindly share with me. Thank you very much in advance.

  Dear VA Napoleon,

  Thank you for your immediate response. If it's possible means gives the example script.

• I want to move the HDD on Satellite L10

  Hello

  I'm new to the forum, I bought a satellite l10 two years ago and was looking at my hard drive upgrade, glancing accessories toshiba advises that I have to buy an external hard drive, but this simply means that some additional items to carry, can someone advise or help me

  Hello

  Of course you can upgrade the HARD drive.
  If you want to upgrade the HARD drive, you must buy one that is compatible and supported by the BIOS.
  Each HARD drive size is unsupported by the BIOS. There is a limitation and big hard drives could not be recognized.
  Sat L10 supports an improved IDE (ATA-6) interface and some devices were shipped with 40 GB HARD drive.

  In my view, that a 60 GB HARD drive should be compatible. Perhaps also a 80 GB HARD drive but I m not 100% sure of this size of HARD drive.

  If you want you can test.

  concerning

• I want to move the bookmarks to a no start Win disk (format jspn) to win 10 PC. The import dialog box wants html, not json format

  the motherboard on my old PC to WIn 7 has become damaged. I took the hard e drive: toward a new win 10 PC. I can find the Archives of bookmark on the old disk - files are in json format, but when I try to import the bookmarks file I can only find a way to import them into html format. How do I resolve this condition glare?

  If the file is in json format, then it replaces the current file.

  To open the bookmark, Manager press the ALT or F10 to rise
  the tool, then select bookmarks.
  Access key is < Control >(Mac = < Command >) < shift > B.

  Once the window is open, the top of the page, press the button
  Import and backup. Select export bookmarks to HTML and follow
  prompts and save it in a HTML file. Copy the file to another computer.
  Repeat the above instructions, BUT select Import Bookmarks in HTML,

  JSON files. Do as above, but select restore. The file must be in the
  Bookmarks backup folder.

• How to: move the taskbar to another facet of the screen

  Original title: How can I get my Start menu on the top of my window is open from my XPwindow it is now on the side

  How can I get my Start menu on the top of my window is open from my XPwindow it is now on the side

  On Saturday, February 25, 2012 15:09:45 + 0000, GINODISANTIS wrote:

  How can I get my Start menu on the top of my window is open from my XPwindow it is now on the side

  Sorry, but I'm not sure what you asking on the subject. What is the taskbar
  you want to move?

  Although by default, the taskbar is displayed on the bottom of the screen,
  It can be on any of the sides on what you prefer. To move any
  side to side, simply click an unused portion and drag
  where you want it. Don't forget to click inside it, not on the edge.
  by clicking on the edge and dragging will resize not move.

  If it does not move, it can be locked. In this case, right click on it
  and uncheck "Lock the taskbar", then try again.

  Moreover, with the screen monitors wide today, I prefer the taskbar
  on the left or the right of the screen. I think that allows a better
  use of real estate than have it at the bottom of screen.
  Ken Blake, Microsoft MVP

• Is it possible to move the files to another user in Vista?

  so I was wondering if I can move all my files and applications on another user? is it possible or not?

  Hi andylam123,

  Yes, you can move your files and settings to a different user account.

  Refer to this article for more details:

  Difficulty of a corrupted user profile

  Note: Ignore the title of the article. You can follow the procedure to copy the files successfully.

• Requests for comment move the cc on another partition?

  Hello everyone,

  I would have liked to move all of the cc to partition applications another.

  At installation, the program allows me at any time to indicate another partition or another disc, on which I would like to install the software.

  4 cc applications take me more than 3 GB on the partition dedicated to the operating system (SSD drive) and lacking space.

  Thanks in advance for any proposal and soon

  Germain Delsart

  Hi, Germain,.

  I think you want to change the installation location of the CC apps.

  Please launch the desktop creative cloud application > click the gear on the top icon right > select preferences > under the creative cloud section, you can specify the installation location.

  Reference: installation directory change request

  Kind regards

  Sheena