I want to print several photos on a single sheet of paper.

Similar Questions

• print two photos on a single sheet of paper of photo officejet pro more than 8600

  I would like to print 2 photos on a single sheet of photo paper. These should fit into small frames and requires 900 x 650-two fits 6 x 4. When I go in my photo editor, it shows the picture (I tried with a) up on the preview, but the printer says that this is not the correct size of paper. Thank you.

  Thank you for taking the trouble to answer. After I posted the request I tried again and this time she did not accept the photo paper. I don't know what happened. One of my problems was how to get 2 pictures on the page, because after that I had chosen 2 to the sheet he doesn't seem to be anyway to introduce the other. Now, I discovered that all I have to do is select the two images in windows Explorer, and although it does not show a preview it does not produce the required result. Thank you again for your willingness to help.

• How can I print multiple photos on a single sheet using windows 7

  I want to print up to 4 photo on a single sheet, but I do not see how to do this.

  Can you please help me, thanks

  You see the list of "Related Discussions" under the button 'More help'?

  How to print multiple images on a single sheet of photo paper in Windows 7?
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/how-to-print-multiple-pictures-on-a-single-sheet/d39495e7-4874-4c5b-B949-8888e59c7e81

• Print two photos on a single sheet of photo paper

  On a C5180 all-in-One printer how to print two 5 x 7 photos (same photo) on a single sheet of 8 1/2 x 11 photo paper?  I am running Windows 7 on my computer.  It seems a pity to print a single 5 x 7 on page & lose the use of the rest of the document.

  Bill

  Do you remember the name of the program by any chance? I think you can do this with Windows Picture Viewer, and it must be installed with the operating system. What program opens your photos now?

• How to print multiple photos on a single sheet

  I try to print 4 photos of the same subjecton a sheet, I can't figure out

  muscularchristi

  Welcome to the Community Forum of HP.

  See the following document:

  Print Photos - two methods

  In particular, if you use a Mac, you can count on Photo Creations - this software works very well with Windows, of course!

  The second method that uses the Windows Photo Viewer shows some examples, which is as follows:

  Print Photo on the main plate

  Notice the arrow that points to the selection of the photos in the right column in the example.  You can choose how many photos you want on the sheet of paper right here: one, two or more pictures on the sheet.

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer provides a fix or a workaround!

• HOW to PRINT SEVERAL PHOTO ON a PAGE A4 (from my Powerbook)

  I would have a choice of printing several photos on an A4 page... 2, 4, 8 photos on one page. How do I do this with my Photosmart 5020

  OK, I was able to print 4 photos on a single sheet, but then again I couldn't choose to print borderless... I thought I would like in my Epson a better setup as well the number of photos, but also to be able to resize them with or without white line in the middle... I used as you preview of Apple, but I wonder if HP doesn't have a print on her program?

  In any case your information at least allowed to print multiple images on a sheet of paper.

  Thank you for your kindness,

  E.

• Print several photos on 1 sheet

  I am printing 4 pictures on a single sheet picture 5 x 7. Printing plan seems to be totally unusable.

  I select 3 photos and cannot place on the screen

  I select a 4th photo and it places on a 2nd sheet

  I can't resize a picture by clicking on the image and adjusting the height (like most other windows packages)

  If I move the photo it seems to change the landscape mode to portrait mode

  I put the 5 x 7 glossy print settings but some option I chose "Select layout" gives me a message saying that the selected page is larger than the size of the paper - even if they are both set to 5 x 7.

  If I select a photo and try and move it, it duplicates the image elsewhere on the print page - just and won't let me delete or cancel

  I chose the format of paper 5 x 7 and available 5 x 7 (4), but the nag screen doesn't always show 4 photos placed logically.

  This task should take 5 minutes - I'm now quit after almost 2 hours - which included the reading of many questions from the community of people doing this simple task and clearly having the same problems I have.

  You can make your own model of 'Picture Package'!

  Go to file > new > empty file. Enter the width and height of the paper stock, resolution should, ideally, be equal to 4 photos. Color of background in function. This will be your canvas.

  Drag the 4 pictures of the location of the project to the work area. Each will be on a separate layer.

  Use the move tool to position images and resize with the corner of the frame handles encompassing

  You can open the gate of orientation.

  I like to crop the images to the desired size before being placed on the canvas.

• Want 5660: Printing on both sides of a sheet

  I love the ability to print on both sides of a sheet of paper.

  I know that if I have a document that has multiple pages in can I print every 2 pages on a single sheet.

  What I have is several files, each a page definition, but I would like to select, say, 2 files and say: "Print on both sides" and it would print the first file on the file 1 and the 2nd side on side 2.

  > >... What I have is several files, each a page definition, but I would like to select, say, 2 files and say: "Print on both sides" and it would print the first file on the file 1 and the 2nd side on side 2...

  Each file you want to print, the printer driver generates a print job that is sent to the printer.

  The printer interprets the content of the print job and prints the requested page or images, then (at the end of the work), all incomplete pages are printed and emptied of memory.

  If the next job always starts on a new sheet of paper, regardless of the setting, simplex / duplex.

  The only ways you could accomplish what you want are:

  • Find someone to write you a customized printer driver who would take the content of the two source documents offered as input to produce a single output print job; even if you could find someone to do this, it would probably cost more than the printer (or several of these printers).
  • Merge documents two sources (Word, Excel) entry in a new source document, then print it.

• Printing photos on a single sheet of varying

  I had the image on a print sheet.

  Is this possible in what to print at the same time various prints of sizes on a single sheet A4 to allow a minimum loss of photo paper?

  Your comments will be appreciated.

  Hummingbirdman

  Eureka, Mark. Success in the end.

  I managed to get exactly the effect that I need and I thank you for your patience.

  Best regards, John

• Want 4507: Printing a photo panoramic

  I Envy 4507 printer and want to print an image panoramic.  I followed the tutorial (on this link http://support.hp.com/us-en/document/c03890386) to set up a paper size custom (I use 21.7 cm x 48 cm as a trial).

  The custom size recorded in the box "printer server properties.  However, when I then go to print, I can't find this in the "Printer preferences".

  Any idea on what I can do to fix this?  Or is that my printer is not compatible with custom paper sizes?

  Hello

  Your printer supports custom paper for a specific range format, not just any what size is supported.

  Will not appear any size not taken in charge by the driver, this is why you do not

  The following ranges (Converted centimeters) are supported by the printer for a custom paper size:

  0.76 to 21.6 cm (3.5 to 8.5 in.) wide and 12.7 to 35.6 cm (5.0 to 14.0 in.) long

  You can find the "specifications of paper output > custom below formats support:"

  http://support.HP.com/us-en/product/HP-envy-4500-e-all-in-one-printer-series/5304875/model/7297912/document/c03755986/

• How to print 3, 4 x 6 photos on a single sheet using the photo printing wizard

  Photo 4 x 6 3 on one sheet?

  Under XP I used to be able to print 3 Photo 4 x 6 on a sheet with the photo printing wizard.  Under Win 7, it seems that I am limited to only 2 photos.  Is it possible to print 3 pictures in Win 7?

  I understand your question (even if I'm the only one)

  You want to put three 4 x 6 photos on a page like windows xp.  No four 3x5s or two 4x6s. We know that three 4x6s can adapt because XP can do.

  If you have Windows 7 Pro or ultimate, you can use a virtual machine to "Windows XP Mode" to achieve this.

  Basically, you use windows XP to do what windows XP used to do since Win 7 apparently won't.

  If you have XP home, the "Windows XP Mode" feature is not included.

  If you have Pro or Ultimate then a little googling on the feature should provide details on how to activate and run it.

  I hope it helps a bit.

• How do the layout and export multiple images on a single sheet of paper for printing? [was: Luke H]

  I'm something of a beginner with lightroom (and a little slow with the technology), so my question may seem Basic, but can someone tell me - is it possible to use the print module, then create a page with several photos on this topic for example a model (with different pictures of different sizes on this topic) and then export this whole (with all its photos) page as a file on my computer which means that I can take this single file to the printer, where they can print for me on one sheet? (whenever I do that he sends the photos individually, not on a page, and in their basic format without any changes that I made).

  First of all, I would advise to check with the printer to see if you have understood correctly this requirement for tiff (because most of the laboratories prefer jpg).

  If you really need bring TIFF and do have access to Photoshop or similar, you can use the function Jpg printing option as described above, save the file in jpg with a value of high quality (90 or 100) then import the jpg in LR and exporting in a 8-bit tiff (as jpg is always of 8-bit nothing would be gained by exporting a 16-bit tiff file). Loss of quality would be very small and invisible.

• Print different images on a single sheet

  I would like to be able to print 3 different images on a sheet of 10 x 14 paper. I have a 8 x 10 and 4 x 6 photos, but I would like each of them to be a different photo. Is there a way to do this?

  Thank you

  Andrew

  Custom Package , choose page layout Panel on the upper right of the print module. This will allow provision several cells in which you can drag your images.

• How to print different pages on a single sheet?

  Hello world!

  I am a student and just got my first MacBook.

  Because I print a lot of scripts for uni, I used to print 4 pages on a sheet of paper to secure money.

  How can I do this on my Mac? I haven't found how to print multiple copies of the same page on a single sheet.

  Thank you very much!

  Lucylike

  What app do you use?

• PIXMA MP210. When I print, I get more than one sheet of paper that goes thru.

  When printing, more than one sheet of paper passes through. So far, it still prints what I need. Then I get a message that there is a paper jam. I took almost all of the pieces, but can find no documents or anything in animal feed. I have not changed anything before starting.

  All solutions?

  Carl

  Hi Carl54,

  Performing a cleaning of the printer roller may solve the problem you are having.  To do this, please follow the steps located here.  We recommend that at least three cleaning of rollers on the printer.

  It has not responded to your question or problem? Please call or write us using one of the methods on the page contact us for further assistance.