I want to register my phone with a chip from the Bahamas to make calls to the

I want to register my phone with a chip from the Bahamas to make calls to the United States, but it is not an option. Is there a work around for another option? I have unlimited international calls

Unfortunately, the SkypeToGo program is not available in the Bahamas.

TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.

I recommend that you always run the latest version of Skype: Windows & Mac

If my advice helped to solve your problem, please mark it as a solution to help others.
Please note that I usually do not respond to unsolicited private Messages. Thank you.

Tags: Skype

Similar Questions

  • Can I synchronize my phone with my library from another computer?

    My laptop can not be updated beyond iTunes 11.4 because I'm on OSX 10.6.  I have access to a desktop Mac with a newer version of iTunes.  I turned on home sharing, so the music library on my laptop appears in itunes for the Mac desktop.  If I sync my phone on the desk, I'll be able to sync it with the music library on my laptop?

    Yes, but a phone can only be synchronized a library at a time.  Except if you transfer all of the library to the new computer (which may have several libraries) iTunes will want to erase your phone before it sync to the other library, which is the same as the old media. In the concept that shouldn't matter since both libraries should have the same content of media.

  • How can I switch phones with a member of the family without losing the data on a phone?

    How can I switch phones with a member of the family without losing the data on a phone?

    jkatts wrote:

    How can I switch phones with a member of the family without losing the data on a phone?

    Make a backup of each phone to iTunes or iCloud (do not forget to use your Apple ID or personal computer), then do whatever your carrier wants do you to change numbers if that's your intention, then restore these backups on the device of the "other."

  • Can I use two phones, with separate numbers on the same account?

    I'm not an Apple user, so apologies if this is common knowledge! But my CEO is going abroad next week, so we gave him a second phone as a backup in case something happens - with a separate number (we will have diverted current number if necessary). Am I able to use his Apple ID on both of these phones and save them on his laptop computer using the same account Apple's iTunes?

    And while I'm asking, if he is losing his current phone, when it plug a new to his laptop computer and synchronizes with iTunes, it will download as well its history of message? (email, contacts, and calendar easily because they are synchronized with our Exchange Office)

    Thanks in advance!

    You can use the same identifier Apple on both devices. You can also save multiple devices on the same laptop with iTunes. iTunes a tell the difference in the two devices, but it is also good to give them different names, in settings > general > topic > name.

    In case something happens to the first device. If you have saved the original equipment and something happens to her, you can restore the second device from a backup of the first. Everything that has been saved from the first would end up on the second, including messages that are currently on the phone. The problem you are having has to do with new messages. If people sent to the first number, you would be better off by activating the second phone with the old number if necessary. It does not hurt to have already activated with the new number, but it will create a problem for messages. And transmit the phone number will be phone calls to the front, but I do not think that he would transmit text messages.

  • Hello ı have a problem with my phone ı cant get assistance from the Turkey you'd like ı cant me my phone and all functions does not work

    to whom it my concern

    my name is yusuf of istanbul

    I buy my phone 5 supports befor but the phone does not work and I can't phone me

    no body helps me to istanbul and people is treat me wrong here...

    So want you sell my theye problem don't chack the phone even if you please help me and send information of raphael

    I want to change my phone because I have 1.5 year warranty please inform me on the subject...

    Thank you in advance...

    Yusuf *.

    ******

    ******

    Where have you bought the phone?

  • How to remove the phone (bluetooth device) completely from the computer

    Original Title - need help with Bluetooth on Windows 8 devices?

    I'm trying to remove my phone (Blackberry) to my Bluetooth devices, because it does not work properly (I want to remove the device and then try to connect to it). Removed completely from my phone, I am removing my PC.

    I thought that I removed in 8 gain settings menu (in pc settings > devices), and then tried to delete there from there, but when I tried to connect my phone after that, he always says to remove the device from the computer, and then try again.

    In addition, the folder bluetooth (empty) for the folder bluetooth of my phone won't disappear in my computer. The phone is not yet listed under devices and printers in Control Panel.

    How can I remove it completely?

    (the laptop is a Lenovo g580)

    Hello

    Thank you for keeping us posted.

    I need more information to understand the problem and help you with the best available resolution.

    The question is limited to the connection to a specific device?

    You can follow the steps and check if it helps resolve the issue, that the device could be hidden.

    a. press the Windows key + X.

    b. click on Device Manager.

    c. click view.

    d. click the hidden devices.

    e. look for the Bluetooth device.

    f. right click on the Bluetooth device , and then click Uninstall.

    If please get back to us and let us know if this helps.

  • My iPhone and Mac all have two Photos related to iCloud, same images appear on both. How to remove pictures from the phone without removing them from the Mac

    I've shared pictures between my Mac and iPhone using iCloud. Recently downloaded about 1800 brother SmugMug account family photos. Subsequently discovered that they had all been loaded on my phone as well. When I try to delete them from my phone, I get a message the suggests that if I do, the photos will be removed from my Mac was fine. How can I remove the phone and let the Mac intact?

    I've shared pictures between my Mac and iPhone using iCloud.

    What iCloudService do you use?

    • If the iPhone and the Mac are synchronized with iCloud photo library, removal of the photos from the iPhone will remove them from the Mac as well.  iCloud photo library is a synchronization service that will ensure that you see the same pictures on all devices. All change at will the timing and any deletion or any import.  To win the storage on the iPhone allow the iCloud Photos setting "Optimize Storage.
    • If photos have been synced with my photos and not iCloud library stream, you can remove them from the iPhone. They must stay in the library on your Mac. But before a massive deletion on any device, make a backup of your photo library, just to be sure.
  • If I synchronize Firefox on my iPhone, can I remove bookmarks on the phone without deleting them from the computer at home?

    I don't want a large number of bookmarks 'House' on my phone. Can you separate the two?

    Hello

    You can't separate them, but you can remove them in Firefox Home without removing them from your computer at home.

    Firefox Home is just a customer and any changes it does not affect the rest of the devices.

    I hope that clarifies the situation.

  • Browser keeps opening with previous tabs from the previous day. How can I stop this?

    Under Tools > Options > general, I have the browser when I open the browser to "open a white page" but it keeps opening the previous tabs from the night before. How can I stop this? I read the advice of the forum but not found or overlooked the answer. I checked all my other settings and can't find anything that could be the cause. Please advise?

    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
    Note: This will make you lose all the Extensions, open Web sites and preferences.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

  • Satellite Pro P100: Wlan with no response from the server proxy C-27

    I have a laptop model Satellete Pro P100 and tries to connect to a wireless router.
    I was able to connect to it over the past four months.

    Last week, I connected to a wired network and now he refuses to re - connect to my home wireless network. He acknowledges that I am connected but connectivity doctor says "there is no response from the server proxy (c-27).

    A friend in the House is able to connect to the internet with their computer without problem.
    I have tried everything I know, but need help please. Thank you

    Hello

    Have you checked in the properties of Wlan settings and the TCP/IP properties?
    Please check if the options: IP automatically get an address and get server address DNS are automatically set correctly.

  • How to explain this... I want a list to bullets with bullets downwards in the middle. How?

    I want to do this:

    Something • something else

    Other things other things •

    Point 1 • things Extra

    But what I want is for the line up balls down in the middle. Is there a way to do this automatically in InDesign, or do I just space all to make it work?

    InDesign CS3

    Use a table with three columns. Put the balls in the middle column.

    Bob

  • Question about warranty in combination with a downgrade from the OS

    If I want the free extended warranty, my serial number is not active. I've killed my XP OS. May be the problem of downgrade? Thank you

    Check if mix you letters and numbers!

    If you will not be able to register the warranty extended in the internet then contact ASP in your country and the guys should help you record your laptop!

  • Version of the phone do not update from the update 2015.1

    Something really weird: update of Muse this week at 2015.1. Since then when I add new images to my site they do not come up not in the version of phone (after downloading via FTP). I use not sensitive but have for desktop/tablet/phone fixed width pages. Before this week to update new images and other page immediately changes appeared in the downloaded version of phone. Normally, I discover with the Chrome browser on an Android phone - have not checked on iPhone yet. I also checked with the Firefox browser on Android phone and the new images are not displayed in this case either, so I think that the issue should be at the end of Muse.

    Anyone else notice a question like that, or have any suggestions? Thank you very much

    www.sweaverphoto.com

    Thank you, Catherine. I did it on the Chrome phone's browser. Just did the new updates on my site and checked the phone. None of the new pictures are coming. Site is the same as it was days ago. Desktop version immediately displays the updates.

    Checks the version of the phone and Firefox browser does not display updates, so I guess, there may not be a problem of the browser cache as no browser is shownig updates and new images.

    What do you think could be the problem? This afternoon, I'll be in a store and will check the version of the tablet to see if updates appear on them. (I am not a Tablet).

    Thanks again.

  • Create a TXT file with header & trailer from the existing report

    Can someone show me please how to get Application APEX to spit a .txt file which will have a header and information as well as the report. Working on a project where the information is entered on the APEX and the report is unloaded in a specific format in notebook must be downloaded into the SAP.

    Looking for a better automated way to do it. See the example below. the first line is at the head of the column, is then the header, then the body (report) and finally the trailer down.

    Note: the information header and trailer are pre-formatted text and calculations.

    Thank you




    Document Date reference invoice number freight

    H _NONPOTEST 02092006 NONPOINV
    05012005 E02082006bb.00.00 103200
    05012005 E02082006bb.00.00 103200
    05012005 E02082006bb.00.00 103200
    05012005 E02082006cc.00.00 239801
    NONPOTEST T 6 3000.00

    It will NOT work as a report of the APEX. You are bypassing the bu report generator this. If you want to build this using Report Designer, then you will need to redefine what you're after, given that the report generator is NOT default to the creation of text files... He can build a CSV file based or PDF with the right software installed on your server...

    Thank you

    Tony Miller
    Webster, TX

    Published by: Tony Miller 24 Sep, 2010 14:55

  • How to deal with information coming from the disk utility - repair?

    I managed courses of recovery of disk space in my SSD. However, I don't know what to do about this:

    After recovering in the SSD space, I ran the option in DiskUtility 'fix' with these results:

    1 volume bitmap needs minor repairs for orphan blocks

    2 save file system exit code is 8

    3 operation was successful.

    I ran it again, the function of repair with these results:

    1 Macintosh volume has been found damaged and must be repaired

    2 save file system exit code is 8

    3 operation was successful.

    Hoping that the repair function had solved the problem, I ran it again with these results:

    1 volume bitmap needs minor repairs for orphan blocks

    2 save file system exit code is 8

    3 operation was successful.

    Thought that I needed to restart the device. After the re - start disk repair utility told me:

    1 volume bitmap needs minor repairs for orphan blocks

    Invalid 2 free block count

    (it should be 33309635 instead of 333008871)

    3 save file system exit code is 8

    3 operation was successful.

    What is my next step?

    Should I ignore this message?

    If this isn't the case, it must be repaired, and how do I do this?

    Is this something that would need to get a new drive?

    Thank you

    If you don't have a good backup make one now. Always keep your Mac backed up on an external drive with Time Machine or utility of cloning like SuperDuperordouble clone.

    Next step is to clear and re - format the hard drive and then restore your system from now the command option + R keys

    OS X: on OS X Recovery - Apple Support

Maybe you are looking for

  • Why is there a '(1)' in front of my Facebook bookmark?

    I don't have the active tasks or messages, but it won't go away... more a little boring.

  • Satellite P105-S9722: need info on the Toshiba warranty policy

    Hello I have a question about the Toshiba international warranty policy, I searched but did not find the answer on the site. I have a P105-S9722 I bought February last year and the warranty expired in Feb 08.The whole screen has been replaced for fre

  • The BT communication between NXT

    After a BT connection between NXT, I run a simple vi on the NXT master to write a message to the NXT slave. At the same time a reading vi runs on the NXT slave simply to read and display the message. Nothing seems to happen. I use the VI in Addons >

  • Opening a VI from another VI.

    I am writing a program to share the data between 2 VI.  I need a button on one of them that opens the other is possible that this is possible? Thank you Matt.

  • HELP me: Windows Deployment Services

    Hello. I'm a new Builder (new system in the area of imaging systems software) and try to get a facility to take correctly.  I am using this guide: deployment guide and it tells how to install and configure the server and get you your main system (sta