I want to replace my charger
Hello...
Sometimes my charger is not working so I want to replace my charger.
kindly tell me the procedure.
Thank you
If it is a factory fault then you can exchange it, otherwise you will have to buy a new one.
Take a bar make genius with Apple for an assessment.
Tags: iPhone
Similar Questions
-
Firefox has informed me that he had downloaded an update. When I tried to install it, my iMac asked me if I wanted to replace an OLDER version of firefox. It was not not clear to me why he asked this. If this download is an updated version, why is detected by my computer as an "older version". ? And should I install? I can choose to replace the 'new' version, or keep both. What is the best? (Without unnecessarily using extra space).
Thank you.
Hello phkirby, please always try to download and install firefox from the official site, do the following:
1. download a copy of the latest http://www.mozilla.org/en-US/firefox/all.html firefox (full installer)
2. Trash , install the current application of Firefox to do a cleaning.
3. install the version you downloaded.
Do not select to delete your personal data, your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks or other personal data.
See also: Installation of Firefox on Mac
Thank you
-
I want to replace my list of bookmarks with an import html file - how can I do this?
I have a file of bookmarks in Firefox. I want to replace the file - delete the current as well as all bookmarks - import a new HTML file to bokmark to serve to my bookmark list primary.
How can I do this?
Thank you very much
John
You can delete the places.sqlite file and any backups JSON in the bookmarkbackups or move them to another folder if you want to keep a copy.
Then, you can import this HTML file. -
Hi, my iphone 5 have some problem in its port .i want to replace it, can someone tell me how much I spent on this iphone?
Apple will usually provide a replacement
You can check the cost here
-
I want to replace the 40 GB HDD on Satellite M50 130
I want to replace the hard drive, because it becomes unreliable, but can't fnd the specs.
Can someone help with the exact specifications please?
Is the drive IDE or SATA?
Size = 2.5 inches?I think the original size is 40 GB, can I replace it with any size?
Did the removal and easy replacement? Are there instructions please?
I have a horrible feeling that there may be data recovery for the operating system on a hidden in the drive partition.Is this correct? May only be transferred to a new hard drive?
Thank you very much
NickSatellite M50-130 has been delivered with the 2.5 "60 GB HARD drive.
This HARD disk supports a rotational speed of 5400 RPM and it supports an improved IDE (ATA 6) interface.If you need a HDD IDE and not SATA
-
I want to replace the DVD-RAM UJ-846 for Qosmio G20-127
Hello
I want to replace my carpet * a DVD-RAM UJ-846 of the G20-127.
Someone knows his apare part # and any sugestion wich RAM is compactables for my machine and better plase to get?Hello!
If you want to replace your CD/DVD drive, you should look in your user manual. It should be a list of compatible drives that work with Notepad. Check it!
The new RAM should be a SO-DIMM DDR2-533. The part number for 1 GB is PA3411U-1M1G.
Finally and most importantly the best place for spare parts is the authorized service provider. They order all the original parts of Toshiba and the Toshiba site, you can search for the closest.
Good bye
-
Qosmio F10 - 100 - I want to replace the HARD drive
My hard drive on this laptop just died and I want to replace it. The current hard Bank ability is 60GB.5400 RPM.
Can someone tell me what than the maximum capacity hard drive I can come up, and if possible what should I look for in an equivalent hard disk if a replacement Toshiba is not readily available.
Thank you very much
Hello
Take a look at this thread:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=41606Seems that you need a 2.5 IDE HARD drive.
I think you can take a 120 GB HDD and the HDD should work properly.HARD drive Bay must be placed at the bottom of the unit.
Its guarantee with a plastic cover and screw. Remove the screw, then cover in plastic and then you should be able to remove the HARD drive...Welcome them
-
Satellite P10 554: I want to replace my carpet ODD-Drive * a UJ-811
Hello everyone,
I want to replace my carpet ODD-Drive * a UJ-811. My question: is this master drive or balm or cabelselect und is compatible with the Slim NEC AD - 7540A?
Thanks for the replyHello
It's not easy to say because this setting depends on the installed firmware.
I can only suggest on this settings and I think that it s a C - SALT.Before buying readers devices, you should be sure that this device is supported.
In this way the Toshiba service partner could provide good info. -
Satellite L350-16U - I want to replace the Vista to Win XP
I want to replace my operating system (windows vista) on my PC (Satellite L350-16U) by windows XP. Is this possible? Is how hard it?
What s the verification of the list to succeed in this business?
Just a question:
Search you and read a few threads here before you posted this question?The forum is a large database and this theme has been addressed several times here!
-
I have a wired to the internet using my base station for 4 expresses the hard extreme airport. I want to replace the base station with a time capsule.
It is also easy to replace the existing base station and adding the name of the network and the password?
You should be able to transfer your configuration of your current access point to new, and then you would just set up the internal drive, try to look at these articles:
ith-new http://www.TechRepublic.com/article/apples-Airport-extreme-out-with-the-old-in-w.
-
Want to replace Ralink RT5390R
I want to replace my wifi for my laptop HP2000t-2 adapter to 00.
I search and 4 or 5 cards are listed.
This means that they are all compatible with my laptop model?
H Lexpres61,
Thank you for visiting the Forums HP's Support and welcome. I read your thread on your laptop 2000 t - 2A 00 HP and replace card Ralink RT5390R. It shows me that the part number 689670-001 is compatible with your device. You can get this part surf parts HP.
If you are looking at a different site, you must ensure it is the same size as you and pin connectors.
I hope this helps.
Thank you.
-
It is possible to omit the popup warns "do you want to replace the existing file?
Well, the title says already
I have an application where the user can save the results to a log file; These data are added
(using OpenFile (file_name, VAL_WRITE_ONLY, VAL_APPEND, VAL_ASCII), so the opening of this file will not replace its content, but it adds up.) It would be appropriate to use the same file.
Unfortunately, when the caller (FileSelectPopupEx) and selecting an existing file of the warning that appears the file already exists. It's OK. But the message keeps saying "want to replace you? In this case, this message is quite confusing for the user, because the program will not replace anything (which of course does not function FileSelectPopupEx).
So I was wondering if it is possible to avoid or change this message popup?
Thank you!
What constant you spent buttonLabel parameter? The behavior of the function changes depending on the indicated button. In particular, (citing the help):
Note If VAL_SELECT_BUTTON or VAL_LOAD_BUTTON is passed to the parameter buttonLabel, FileSelectPopupEx service confirms that the selected file exists. If the file does not exist, the function prompts the user to select an existing file. Using the button "Save" should result in the confirmation message that you face now.
I guess if you are using the simple OK button no prompt (to confirm: I'm not sure but I can't test it at the moment).
-
Error message "this font is already installed. You want to replace it.
Original title: police is already installed Message ALWAYS (but is NOT)
It is not SERIOUS what I'm trying to install the police even if I've NEVER seen people like her before, it could be just created and updated on the website today and when I install ANY font it says "this font is already installed. Do You Want to replace It? "even if it is NOT installed and it does not MATTER whether I say yes or no, the police does not install! and is NOT in the system fonts!
Hi Justin,
What browser do you use to visit Web sites?
The problem can be solved by using the option of ignore the font styles specified on Web pages.
Perform the following steps if you have Internet explore and see if it works.
was: open Internet Explorer.
b: then click on Tools > Internet Options > general tab
c: Then click on the accessibility button
d: mark "" ignore the font styles specified on Web pages".
e: Click on apply > ok.
Answer please if you have any questions.
-
I want to replace my graphics card
Greetings,
I want to replace my graphics card, I have a desktop HP Pavilion 763n PC. It still has the original DDR RAM 512 specification and graphic video GeForce4 MX420 64 MB DDR. The only thing I've changed is the upgrade of the software for Vista Ultimate and caused her to become very, very slow to start and run programs. I was hoping that someone here can help advise if I should only uprade the memory or video card, or both. And what would you recommend for materials. I just want to get started quickly and watch videos and play games online with my pc. Thank you.
Here are some specs:
actually. I knew I should be walking to xp professional instead! Thanks for your help old_geekester
-
I was wondering if there was a way to get windows 7 to look like windows xp then copy and paste files. I don't see the pop-up box asking you 'do you want to replace these files' on 7, I want to see this box and know that 7 will overwrite and copy everything.
The details of this are, I have a folder with a lot of stuff in there on my desktop windows xp, when I try to copy and paste it on my windows 7 is not to copy and paste all the stuff. I have plenty of hard drive and don't ever see an error message. So why I wonder if the same 7 will overwrite some files. Help, please!Hello
If I understand the question, you want how copy and paste the function works in Windows 7. Please let me know if this is not correct.You have reached the right forum for your question. We are here to help solve your problem and guide you in the right direction.I suggest you to see the links and check if it helps.Work with files and folders
http://Windows.Microsoft.com/en-us/Windows7/working-with-files-and-foldersCopy and paste a fileSelect multiple files or folders
http://Windows.Microsoft.com/en-us/Windows7/select-multiple-files-or-foldersHope this information helps you. If you need help or information, please reply to this message. I'll be happy to help you.
Maybe you are looking for
-
Hello I have a brand new iPad 2 Pro. I can't find a key on my keyboard, however. Instead, I have an emoji key where the control key should be. I checked my settings, and the keyboard is set to the standard version with the off emoticons. Is it possi
-
No noise and acoustics on Satellite A10-S177
My laptop is a Satellite A10 - S177 XP, I happened to remove some programs from my laptop to create space, but it happened that he touched my audio and sound and currently they sound and audio bit in the control panel don't say no audio/sound driver.
-
Impossible to get the recovery disc Vista for DV7-1020us notebook.
I intend to install a new hard shore (750 GB) in my Pavilion DV &-1020us notebook. I use Vista 64 bit OS. Software does not offer me the possibility to make recovery disks. I can back up my files. The HP site says my computer does not recognize my se
-
Cannot start video rendering, check that you have an installation valid directx
I use Skype and that you cannot use the video due to the above error message
-
There are about 4 or 5 of them. They number about 1500 to 3000K. They are malware, viruses, or should they be on the computer? The operating system is Windows 7 with IE 8.