I want to reset hp p1102w wireless default IP address manually

I want to reset hp p1102w wireless to the default IP address manually without a web brouser wireless connection.

I'm on win7

I tried to set a fixed IP address of 192.168.1.101, but I used the false mask of 255.255.0.0

I could use 255.255.255.0

So, when I use the hp Wireless Setup is says I can connect to the printer, but the network is bad.

So I couldn't reset the IP address and the mask for the correct values through the fbrouser web.

I noticed that with my 2 other similar printers there is a checkbox indicating the reset default wireless.

I wonder if it is possible to set the default settingson the printer manually without an internet connection to web brouser?

What can I do to solve my problem?

Any suggestions you can give me, I would apprectiate.

The proposed document was good and all

I liked the section 'Download updates of the firmware for your hp printer'

I found a paper by Shiomil "the HP 1102w printer stuck manual IP".

solved my problem

To reset the default firmware values "lbuttons cance and wireless-press and then switch the printer"

After that, I ran the standard wirless install procedure and has obtained an IP address from the printer proveided by the DHCP router.

Then I used the brouser with this IP address for the printer setup page.

Then I reset the IP address to the IP address fixed, I want to use the printer.

That solved my priobelm

Thanks for your help!

Tags: HP Printers

Similar Questions

  • I want to reset all the gpo admin, security settings, etc. by default setting. Is there a script file, treatment by batch or reg I can access?

    I want to reset all the gpo admin, security settings, etc. by default setting. Is there a script file, treatment by batch or reg I can access?

    Hello

    I suggest you to send your query in the TechNet Forums to get help.

    http://social.technet.Microsoft.com/forums/en/category/w7itpro

    It will be useful.

  • HP P1102W WIRELESS PRINTING HAS STOPPED WORKING

    Our P1102W lost the wi - fi connection and we cannot get it back.  Seems to be a printer WiFi issue.

    It is one of two HP printers (other is a 5510) using a wifi network at home (WPA2, w/password), accessible by a Dell laptop and an Apple MacBook AIr (mines).  Two computers can access the 5510.  Both lost the P1102W.

    The blue network on the P1102W is no longer regularly lights up.  By pressing the button on the P1102W wireless accomplishes nothing.  Electric bike achieves nothing (but used).  Moving the printer does not help.  P1102w works fine on USB key.

    We tried to reset the Modem and the router. No change.

    We have reinstalled the software. No change.

    We tried to run the instructions from HP to make the printer wireless using Printer HTML Config Utility, but there page does not load in Safari. (Very frustrating).

    Self test shows

    Firmwarer Datacode 20120814

    Version of the driver software = 20091104

    State of the information network not connected

    Hardware address = 00:00:00:00:00:00

    IPv4 = 0.0.0.0

    Subnet mask = 0.0.0.0

    default gateway = 0.0.0.0

    Hello name =

    802. 11 b / g wireless

    Status = active

    Comm mode = invest

    Name the network SSID = myuniquenetworkname

    = WPA/WPA2 authentication

    IP configured by = manual

    Server DHCP/BOOTP = 0.0.0.0

    0.0.0.0 WINS server

    Printing of pages = 6218 so far

    Hi @maddog8212 ,

    I see that you have lost connection with the P1102w wireless. I will definitely do my best to help you.

    I would like to reset the printer first to clear the previous network settings.
    Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

    Print a configuration report and check the SSID address and IP are disabled.
    Print a Configuration Page.

    Plug the USB cable from the printer to the computer.

    I have provided Windows and Mac steps, you can choose how you want to set up the printer again.

    Windows as follows:

    Run the Wireless Setup to set up the printer on the network again.

    Go to start, all programs, HP, HP Laserjet P1102w, then select Wireless Network Configuration.

    Steps to configure the wireless.

    Then, unplug the USB cable.

    Test the printer.

    Mac as follows: (since you mentioned that you had the HTML option for your Mac)

    Make sure that Safari is set as default browser. (sometimes the SAP will not open if it is not set by default)

    Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

    Close all applications.

    In the Apple menu bar, click Go, computer, MAC hard drive, library, Printers, HP, LaserJet, click the folder for your printer, click browser EWS or HTML config, it should open the webserver integrated for the printer to set up the wireless, and then click the network tab, click on wireless on the left and fill out your information. (be sure to infrastructure is selected and alpha or numeric is selected) Apply the settings.

    You should get a solid blue light on the printer in 1 minute about.

    Remove the USB driver, then add the network printer:

    Click on the Apple.
    Click on System Preferences.

    Click the printing and scanning.

    Select the printer, and then click the sign - to remove the printer. (USB driver)

    Unplug the USB cable.

    Then click on the + sign and select the printer from the list and click Add. (Hello P1102w)

    Try to print.

    If you have run Setup for the wireless again on Mac in the first place, on the Windows computer, simply create a new port.

    Go to start, devices and printers, click right on the printer and on the left, click printer properties, select the ports tab.

    Click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
  • HP LaserJet Pro P1102w: HP LaserJet Pro P1102w Wireless Installation - adding other laptops and desktop PC...

    Hello

    I have a question about computers adding more to my HP printer.

    I followed the instructions & so I can print wireless from laptop, I used during the installation (after removing the USB cable).

    I can also print wireless from our various iPads & iPhones (after the change of the printer WiFi).

    But I don't see how I can 'Add' laptop (Windows Vista) daughter & my main desktop computers (Windows XP), so they can print wireless too!

    Does anyone know how to do this?

    I tried to launch the installation of the drive on my laptop HP printer girls. He was able to recognize the printer, but was unfortunately unable to print.

    For any help or suggestion would be appreciated.

    Thank you very much

    Simon B.

    Hi & thanks,

    I also found a solution to install my printer HP LaserJet Pro P1102w wireless & connecting then 2nd, 3rd & subsequent laptop/desktop computers.

    I initially reset the printer to remove any configuration, then I did the following:-

    Install on a laptop using a CD or could start simply by connecting the USB cable to the laptop. Follow the instructions, test the characters etc. (to prove that the wireless network is configured correctly)).

    Check printing wireless since this laptop computer 1 initial works, & also works various iPad/iPhone etc.

    Problems have been met when try to get other laptops/workstations to print wireless (2nd & later).

    The following seemed to work: -.

    On the other portable computers desktop (do not plug printer with USB cable): -.

    (1) the installation of the CD,

    (2) choose the series w1100 - Wireless install,

    (3) choose to install the printer software (& display the Guide of the user if want),

    4) click Add another printer (option 1).

    (5) choose HP LJ P1100w Pro Series.

    (6) choose option 3 (to connect to a network configured wireless (that established earlier),

    (7) following, a lot of software is installed,

    (8) identify the printer by choosing the method to identify it (select in a list),

    (9) side of firewall pinhole (all).

    (10) looking for printer, concludes HP LJ Pro P1102w,

    (11) then the TCP/IP data has been: -.
    IP 192.168.2.46
    Subnet 255.255.255.0
    Gateway 192.168.2.1

    Host Name NPI1C754F

    (12) (stupid 'password required' kept appearing several times - X box to close),

    (13) to enable direct printing,

    (14) then,

    Finally success!  A test prints to computers/idevices like many that I could find.

    Thank you very much. I hope the above can help someone else!

  • P1102w wireless install for OSX Mavericks (10.9.1)

    Hello

    I want to install a P1102W following your instructions on http://support.hp.com/us-en/document/c04510394

    Hi dzhou

    I understand that you are unable to set up the printer on the wireless network.

    I'll be happy to help you with this.

    There are two ways you can set up the printer on the 10.9.

    I would like to reset the printer first to clear the previous network settings.
    Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.
    Click here.

    Print a configuration report and check the SSID address and IP are disabled.
    (hold down the x key and when the printer makes a noise to let go of taken)

    Method:

    Connect the printer to a wireless network using Wi - Fi Protected Setup (WPS) connection
    Follow these steps to install the printer using a compatible router WPS.

    Second method:
    Set up the printer on another computer (10.7 less or Windows computer) to get an address valid IP for the printer. Then go to the Apple system, printing and scanning preferences, click on + and then highlight the printer, click Add. If this does not add the airprint driver. (pre-installed Apple driver)

    I have also provided a document with the steps to a USB and WiFi to install to Maverick. For the wireless installation, the printer must be already on the network with a valid IP address.

    If you need more simply make assistance let me know.

  • HP Laserjet Pro P1102w printer: HP P1102w wireless printer will not pair with a SBG6782-AC Motorola Wireless Cable Modem Gateway

    I already had Internet AT & T U-verse using a Wireless Modem Arris IPDSL NVG510 gateway.  My laptop HP running Windows 8.1 and the HP LasrJet Pro P1102w wireless Prnter systematically and automatically connected to the wireless network NVG510 with no problems over the past two years and the wireless printer works without problem.

    I recently replaced the Internet AT & T U-verse connection a connection of Mbs Comcast Xfinity Intrnet 25, using a Motorola Arris SURFboard SBG6782-AC Wireless Cable Modem Gateway.   My HP under Win 8.1 Pro laptop connects to the network and access to Internet without any problems what-so-ever.  However, the HP LaserJet Pro P1102w wireless printer connects to the wireless network and I can't print at all from my laptop.

    I tried all the suggestions P1102w Wireless Configuration of the printer on the HP printer Support Site, but nothing helped.  I've also updated the firmware of the printer and Loaded the latest driver Installation & full product software.  I tried and re-tried these suggestions over the past two days, but without success.

    I would be very appreciately all help experts in this Forum.  to get the printer working wirelessly, since we also wireless print to this printer of IPads and other wireless laptops.

    Hi @Atmasin,

    I see that you have trouble connecting the printer to the new router. I want to help you.

    I would like to reset the printer first to clear the previous network settings.
    Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

    Print a configuration report and check the SSID address and IP are disabled.
    Print a Configuration Page.

    If the network name has spaces or special characters, the printer may not recognize it.

    The printer is able to send/receive in the 2.4 ghz band.

    If it is set to 5 GHZ network, you may need to change to 2.4 ghz. (rename the 5 ghz or turn it off)

    The WPA key setting must be on AES to work properly not TKIP.

    Multi flow must be enabled.
    Router firewall must be open for printer ports.
    If you have Mac filtering give you printer hardware to meet the needs of the Configuration page.

    You may need to contact your router company to get help to check these settings.

    Try to run the Configuration Wizard wireless of the HP software to set up the printer on the network.

    If you appreciate my efforts, please click on the "Thumbs up" button below.

    If you have any questions, please let me know what steps you have taken and the results. Thank you.

  • My version of Firefox (I think) does not screen captures after the help. I can't navigate according to the troubleshooting and reset. I want to reset

    I want to reset to remove Mysearchdial. I can help but then my version of Firefox (I think) opens a tab of choice and none include troubleshooting or reset as indicated on the screenshots.

    Hello

    The tags on this issue show that you use Firefox v26. It is the latest version.

    You can find instructions on how to reset Firefox here:

    Firefox - modules to reset and refresh settings

    Please note that if your PC has been infected by adware that is hijacking your browser default homepage etc., search engine so you can find that Firefox settings be diverted even after doing the reset.

    You must ensure that the adware that is browser hijacking is removed from the computer before resetting.

    You can try these free programs to search for malicious software that work with your existing anti-virus software:

    I had particular success with MalwareBytes and Hitman Pro.

    More information can be found in the article troubleshooting Firefox problems caused by malware .

    I hope this helps. Let me know if not.

  • I want to reset my Air iPad and I don't remember my restriction code, how can I get it back

    How can I recover my restriction code in my iPad Air? my current update system is 9.1

    The only way to recover is to remember. If you can not then try recovery mode and iTunes from your computer to reset back to the default settings for iPad (you have copied everything you want to keep, photos, shopping, documents?), there are instructions to halfway to the bottom of this page: If you have forgotten the password for your iPad, iPhone or iPod touch , or your device is disabled - Apple supports.

  • I want to reset my computer to its factory settings

    I want to reset my computer to factory settings, wiping it completely clean., I downloaded vista service pack 2 when it came out, so I do not have the disc. I have the original disc, but it says I need service Pack2, how do I restore the factory settings without the disc it asks? I have a Dell Inspiron 1525 with service pack 2 downloaded.

    Hello

    There are several methods to reinstall Vista.

    There is no Windows Vista downloads available from Microsoft.

    You can contact your computer manufacturer and ask them to send you a set of recovery disks.

    They should do this for a small fee.

    To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

    You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

    How to change the Boot order in BIOS:

    http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

    "How to replace Microsoft software or hardware, order service packs and replace product manuals.

    http://support.Microsoft.com/kb/326246

    And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

    The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

    Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

    Ask them to the proper key sequence.

    And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

    Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

    If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

    Some manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    And it is information of DELL to reinstall to factory settings:

    How ro reinstall from the Dell recovery partition:

    http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

    Reinstalling the printer Dell supplied disk:

    http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_339949

    Reference Dell troubleshooting with startup problems:

    http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_343119

    Run the built-in diagnostic software:

    http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=266787

    And if this does not resolve your problem, please contact Dell or their Support Forums:

    http://en.community.Dell.com/support-forums/default.aspx

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    How tor eInstallez Servive Packs the reinstallation of Vista:

    Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

    It will also tell you which SP you have installed.

    Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

    Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

    Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

    Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

    Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

    This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

    http://support.Microsoft.com/kb/947366

    See you soon.

  • want to replace the faulty wireless card in dv6

    Hello

    I want to replace the card wireless in my HP Pavilion dv6 Notebook (product LK384PA #ABG number).

    I read somewhere (in a lot of places actually) that the BIOS will almost certainly turn off the map (may even refuse to system startup).

    My current faulty card is Intel Centrino Wireless - N 1000 (model 112BNHMW).

    Issues related to the:

    If I buy the same model of card off ebay - the bios will allow it? Or the card should be "tattooed HP?

    If I can't find a map tattooed HP on ebay - I'll be able to use a USB wireless card?

    TIA

    Hello:

    Here is the link to the service manual for your laptop.

    Cards supported with the corresponding reference numbers are in Chapter 3 begins on page 19.

    What you said is correct. You only NEED to install one of the maps in the maintenance manual and it MUST have this part number HP on it or it won't work at all.

    Laptop you don't POST until the unsupported card is removed.

    Make your request eBay only by the number of the desired part. Do not interview the model of the card.

    You can also get most of the HP maps (of course that you will probably pay more) on the site below.

    Enter the part number you want to buy. If this is not available, you can call HP and give them your model number and the wireless card you want and see if you can get it that way.

    http://h20141.www2.HP.com/hpparts/default.aspx?mscssid=A3443EA1154544F59545214567C9763E

    Or you can use the PartsSurfer from HP:

    http://PartSurfer.HP.com/search.aspx

    Yes, you can use a wireless USB adapter, but I recommend that go into your BIOS and disable the onboard or remove physically, if you never want to use again.

    Paul

  • I want to reset my password restriction cos I forgot the old password that I do not remember

    I want to reset my password for my restriction cos I forget n don't remember at all I just ned to reset new password

    You must restore as new to get rid of the old.  From there, you can define what you want.

  • Why did ask if I want to make the value by default whenever I start it firefox

    whenever I start firefox it asks if I want to put firefox as my default browser. How can I stop this action

    There is a setting for this on the Options page, in the general section. To access this page, you can use either:

    • "3-bar" menu button (or tools) > Options
    • type or paste Subject: preferences in the address bar and press enter

    Should be the first check box in the section 'Starting'

    This article contains more information on the general section of the Options page: start-up, homepage, tabs and download settings.

    Does it work?

  • I want to reset my security questions, but there not the possibility of

    I want to reset my security questions, but there not the possibility of

    Click here > If you forgot your Apple ID - Apple Support security questions answered

  • I want to reset my iMac model A 1147

    I want to reset my iMac model A 1147

    but with the R command does not work

  • I change the settings of firefox and accidentally closed on the display tab, which displays the files, settings, and tools. I can't see how to reset it back to default where I can see those?

    I change the settings of firefox and accidentally closed on the display tab, which displays the files, settings, and tools. I can't see how to reset it back to default where I can see those?

    You can hide the menu bar in Firefox 3.6 on Windows, on "view > toolbars" or via the contextual right click menu on a toolbar.
    Press in and hold the Alt key to display the menu bar.
    Go to "view > toolbars", right click on the menu bar, or press Alt + V T to select the toolbars to show or hide.

    See also what happened to the file, edit and view menus?

Maybe you are looking for