I was referred to this site. Problems with installing Windows on the new drive.

Similar Questions

• Problem with installing Windows on a hard drive, HARD drive does not get detected after installation

  Original title: help with hard drive of the computer.

  Flow of the problem:

  My aunt tried to install windows 7 on the previous copy of windows 8. Needless to say that it doesn't work and it has messed up the hard drive. So, I bought a vacuum. I formatted the hard drive using my other windows computer to have 2 partitions: a boot partition and system partition, and then used the program WinToUSB to install windows on the hard disk. The reason I did it is, because no matter how many times I changed the BIOS in my laptop of aunts, it wouldn't boot from the DVD player to load the windows software. After a few hours, I found WinToUSB. Once windows has been installed, I plugged it into the laptop. For a few hours, I didn't know what to do, because the computer does not recognize the hard drive (he said: "Not detected"). I decided to start from legacy, and then the screen deals

  «intell...» »

  and a bunch of dates, etc all the stuff on the screen to load legacy if you know what I mean.

  He said "not plugged in the media. Check the power cord.

  Then quickly changed screen before I can read almost anything and it goes to the normal windows screen black (with 4 colors). I said to myself, how can he be loading if the hard drive is not detected... Once it is loaded, he brought me to the blue screen (blue screen of death, if you want) I turned the computer on again, always noticing the hard drive was not detected. I ran all the recovery/repair options I could and turned off the laptop. I came back a few hours ago and I loaded the computer again and went into the BIOS.  He said that the hard drive has been detected and said the news about this, as usual. However, at the start of the legacy of windows loading screen, it said still not detected.  I then started to windows to see since it is now detected if that fixes the blue screen. Yet, there is no. I tried to go to the normal windows and screen remains blue. any ideas?

  Hello Chris,

  Thank you for visiting Microsoft Community.

  According to the description, it seems that Windows was not properly installed on the hard drive. I'm not sure how to work the software from third-party manufacturers WinToUSB and reliable installation process is. Microsoft does not recommend using any third party tool to install Windows on your computer, the use of these third-party tools can cause serious damage to your computer.

  I would say to format the hard drive once more and try to install Windows through normal Windows installation process.

  Refer to the section "using the installation option custom if no operating system is installed" in the thread below.

  Installing and reinstalling Windows

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-7

  If you are not able to install Windows on the hard drive at all, I suggest you to contact the hard drive manufacturer to obtain a diagnosis of material performed on the hard drive.

  Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

• Problem with installing windows xp the drive mounted iso in windows 7

  Hello everyone, I am currently using Windows 7 and I would like to install Windows xp. However, I do not have a CD player, so I just have to install the .iso files. When I mounted the image Poweriso .iso file and run the installer there, he opened a window with a few options to choose. And I was surprised to see that the option "Install Windows XP" is grayed out, which means that it is not available. Can someone help me to activate Setup option to install the OS?

  You can see the screenshot here: http://www.mediafire.com/?h6v5l3qnx6mfvt8

  Thanks in advance for your help.

  Best regards

  Mar

  Hello

  You cannot boot from the iso mounted, you must have iso burned to the disc.

  Thank you

  Nitin Aswani

• Re: Problems with Win7 boot on the new Satellite L670-17 x

  Hi guys,.

  Three days ago I got my new Toshiba Satellite L670-17 x. Installing Win7 was not a problem, but now (after the start of the third or fourth) I suddenly a big trouble with the operating system.

  When I turn on my laptop, it loads up until I can see the Windows loading screen. Then - both - the laptop stop working... I can only see the loading screen, but nothing happens. Turns off the light litte to the frontsite (which shows that the specifications of load/work). No error message.

  I want to avoid using the Toshiba HARD drive recovery, because I saved (important) documents on the desktop (I know... not very smart). I ask you to help me with my problem.

  (By the way: I already tried Windows repair system, System Restore memory diagnostic tool and start Windows Mode without failure).

  Thank you very much for your answers!

  If you cannot boot OS in safe mode, that, in my opinion, you have a big problem. I'm afraid only installation of HARD drive recovery will help you in this m.
  The question is what to do with this data.

  Perhaps you should remove the HARD drive and connect it to another computer to have full access to all of these external data. Copy them, replace the HARD drive in your Satellite and install the OS by using HARD drive recovery option.

• Hello, problem with adobe story on the new Safari

  Hello and sorry for my English

  My problem: on this site, my version of the Safari browser is not valid (for accuracy I am on Mac OS el capitan)

  Here the error message or warning-->

  'Browser not supported '.

  We're sorry, but your browser is not able to run Adobe Story
  If you can, please proceed to one of the following browsers:

  Apple Macintosh OS X 10.5 (Leopard) or 10.6 (Snow Leopard)
  Safari 3.x on Leopard
  Safari 5.x
  Firefox 3.x to 8.x
  Chrome for the 15.x 9.x

  Microsoft Windows
  Internet Explorer 8.x or 9.x
  Firefox 3.x to 8.x
  Chrome for the 15.x 9.x

  
  

  If you're feeling adventurous, you can use the link below
  try Adobe Story in your browser not supported. Please bookmark
  the link below to bypass this warning in the future.
  Start Adobe Story with a browser not supported"

  
  

  I wonder if Adobe provides an update?

  or

  one way to solve the problem

  If anyone has a solution that allows me to stay on safari... I take

  Thank you

  After you open the site, simply click on the link "start adobe story...". "downstairs.

  Just make sure you have flash player installed like history depends on. You can get the latest from http://get.adobe.com/flashplayer

• Problem with PSE - 2 and the new 1.5 TB drive

  Hi all. First of all, I use my PSE - 2 recorded for several years without problem. AMD Athlon 7750 2.7 Ghz, 2.0 G memory bicoeur. WD 1 .5TB primary and WD 500 GB secondary drive. Win XP SP3. I recently had a disk fails and installed a new freshly formatted WD 1.5 TB as my boot drive. New installation of Windows XP and updates. When I install the elements, it now seems to install fine. The problem comes when I try to run the first time that I get "could not initialize Photoshop Elements because scratch disks are full '. Then elements shut, not allowing no not me nothing to do with configuring internal program. I tried unistalling and installing on the 500 GB drive, but still not the same error. I increased my page file memory does anyone know of a problem with the installation of the elements on a large drive or can anyone offer a possible solution to what I see? Thanks in advance for suggestions...

  
  

  JohnR.

  I think Barbara meant photoshop 7, which was a little before pse2.

  If you hold them Alt + right Ctrl keys after starting pse2, a dialog box

  should appear allowing you to choose the drive working (keep holding

  keys until the dialog box is displayed)

  If you have a recovery partition on your hard drive, try this to choose

  the drive working, then exit pse2. Then restart pse2 and

  Preferences > Plug-ins and Scratch Disks choose your hard drive regularly to the scratch disk.

  Newer versions of the EPS, the newer less than 3 or 4 don't seem to have this problem.

  MTSTUNER

• 27 "2013 mac only shut down using the power button / stop, is this a problem or a part of the new system

  After my upgrade that Mac is not closed by using the drop-down menu option, it also seems to crash the finder.  Finder raises with force quit.  I can only shut it down using the power button.  Is this a bug/problem of a part of the El Capitan?

  Wacom tablet software is known to cause this problem. Options:

  Uninstalling the Wacom software

  Completely and remove items from connection

  The Wacom driver update

• Satellite P300D - problem with reboot after update the HARD drive

  Hello

  I have laptop Satellite P300D - 12 c and recently, I put a new hard drive, the Seagate momentus 7200 RPM 2.5 "500 GB. It works well, but I have a strange problem; normally when I reboot the laptop when it will close something sounds, in the figurative sense I could say "something moves" for a bit in the DVD - ROM drive and shuts down and then restarts.

  Now, when the reboot happens to the part of the dvd - rom drive, I described above it stucks there... "something is happening" on the dvd - rom drive as trying to permanently access a dvd or something and he does the same thing until I force it to shut down by pressing the appropriate button. It happens once in two attempts to restart.

  Does anyone have a solution or a tip or something? If you do not understand something to tell me,

  Thank you very much

  Hello!

  I agree with Akuma. Maybe the drive is loose and so you should try re-allocation of places there.
  Maybe it works

  And updated the BIOS, you can find the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Good luck and give us feedback! :)

• Problems with installing Windows Update 8.1

  Good afternoon

  I tried to update Windows 8 to 8.1 twice. Each time, the computer shuts down during installation. When I restart the computer and the installation is complete, the computer remains on for 10-15 minutes and stops. This forces me to re - turn on the computer, log in and continue my work. However, the computer stays on for about 10-15 minutes once I connect before it stops. I don't know what the problem with the update. Please provide some guidance.

  Thank you.

  Thank you for the update.

  Press the Windows key + X , and then click System

  Click Windows Update in the lower left corner

  Click change settings and choose the option in the menu drop-down, and then click OK

• Problem with installing windows

  Hello

  I bought my turn dell Jan/13 with original operating system (Windows 8). Last week, I got some problems with his knees. so I decided to re - install the operating system and upgrade to windows 10. I downloaded the 8.1 Windows and installed successfully but the problem is it of not accept my key. What should I download windows 8 and install it again. or is there a way around?

  You need not go to 8.1 Windows if you want to go to Windows 10. use of creating media tool to update your system.

  If you can't get Windows 10 to get 10 app windows or Windows update, you always have the option of ISO to upgrade.

  Download Windows 10 media creation tool

  Simply select this option of PC/improvement.

  After you download the Windows 10 installation files using this tool, you can upgrade your existing 10 Windows operating system, or you can create the bootable USB drive or DVD to install Windows 10 key later. You can also save the installation files to the ISO in offline mode file format, if you wish.

  

  (Askvg.com)

• Win 8 activation problem with a clean istall the new hard disk

  GET THE ERROR MSG THIS PRODUCT KEY IS UPGRADE. IT IS SOMETHING THAT THEY COULD NOT ADVERTISE

  In order to install Windows 8 Pro upgrade, you must first reinstall your original version of Windows that has been run on your computer before installing the Windows 8 Preview version. If it's (Windows XP, Vista or Windows 7). After installing it, you can then do a upgrade to Windows 8 Pro. The output preview Windows 8 does not support upgrades to Windows 8 Pro.

  Try activating the phone and see if it works, otherwise, you will just have to reinstall a release candidate and try again:

  1. press the Windows key + X , and then click run, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• PROBLEM WITH INSTALLING WINDOWS WINDOWS XP SP3 PRO 8.1

  When I try to install the full version of Windows Pro 8.1 on my computer drive I get two error messages.

  1 point entry procedure '_CxxFrameHandler3' not found

  in the "msvcrt.dll" dynamic link library

  [2] the file 'autorun.dll' could not be found or is damaged. Error code is: "[the 0x7F]."

  How do I fix errors on my Windows XP so I can download Pro 8.1?

  Any help would be greatly appreciated!

  Hello

  Follow these steps until you try to install Windows 8/8.1.

  Check if the manufacturer of your computer/laptop has Windows 8 drivers available for your model.

  If this is not available, Windows 8/8.1 not install and work properly for you.

  Download and run the Windows 8 Upgrade Assistant of to see if your machine is compatible Windows 8:

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  "System requirements" Windows 8 ".

  http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

  See you soon.

• Problem with installing windows 10

  I have windows 7 Home Basic. I booked and download windows 10 to get windows app, but after 3 gb of download all he stuck to "preparing for install" for two hours... so I cancelled that and restart my laptop... now get get windows app icon disappeared, and from windows update it's once again the 0% download... now what I can do... If I redownload and even happen next he be waste of time and money... is it you please help

  Please be aware, even if you do not get the Windows 10 app, you can always download Windows 10 as one. ISO file, create a bootable copy and update your system.

  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  See the instructions: How to download official Windows 10 ISO files

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

• Problem with VMWare Tools and the virtual drive

  Hello

  I installed the test version of "Workstation" and installed a windows 7 x 86 non-virtual DVD drive mapped, which is mounted on D:\.

  Subsequently, I installed all Windowsupdates and after that I tried to install the VMWare Tools.

  But every time I get the message that I should look on the 'virtual' drive on D:\.

  But there is no virtual drive, it is my DVD of the hostsystem.

  Is there a way to mount a virtual drive with tools or install them in another way?

  Thanks in advance

  Taldrit

  Hello

  You can directly install the VMware tool configuration by copying the setting in the machine and manually install the same.

  Try VMware on another machine tool in which you will get the installation... Copies on disk and then move it to your new VM and do a manual configuration.

• Install XP on the new drive with no CD player!

  My drive hard netbook was crushed just out of warranty and I na not create a recovery disk.  For the new hard drive that I have to buy a new windows XP complete, or I can download a file init or something to run from my portable CD player or flash drive and just use my product code XP for installation?

  Help!

  If you can find someone with the exact same OEM disc for their netbook, you can make a copy on a USB stick and install it. But you'll need your product key. If you can't find the exact OEM copy, you will need to purchase a commercial XP version, IF you can find one.