I was unable to access Netflix for the last three days - is someone else has a problem?

No matter how I try to access Netflix (I had an account with them for years, never had a problem before) I keep getting charged with 'accept cookies' as well as instruction - I followed the instructions - always the same 'no go' result.

Hello
 
1 have had any changes made to the computer before the show?
2. what browser do you use to access Netflix?
3 is. If you are using Internet Explorer, then what version?
4. What is the exact error message that you receive when you try to access Netflix?
5 is the issue limited to a particular Web site?
 
 
I would suggest trying the following steps and check if it helps.
 
 
Step 1: Enable Cookies in Internet Explorer.

How to set and Customize Cookies settings in Internet Explorer

 
Once done, check if you are able to access Netflix.

Step 2:

Can't access some Web sites in Internet Explorer

Internet Explorer is slow? 5 things to try

Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
 
If the problem persists, then contact Netflix for additional assistance.
 
 
Answer us with more information on this subject.

Tags: Windows

Similar Questions

  • Once the effects of launch failure, someone else has this problem?

    The suite Cs5 is impressive. One problem, After Effects does not start the office. MacPro dual quad core 2.8 ghz, 16 GB ram, hard disk space charges, snow Lepard. Meets the minimum requirements for installation and then some. Now here's the funny part. I installed on a MacBook Pro, 3 years, also meets the minimum requirements, works very well.

    I'm guessing there is a conflict somewhere, I don't know what to look for. When I try to run the software after that I turned on the computer, the icon bounces 5 or 6 times and disappears in the dock. If I try restrat the second time, it bounces once and disappears. I don't get the error messages.

    PJ

    In CS5 you can just choose to reinstall everything, in previous versions the old suites must be completely uninstalled first, then reinstalled. In both cases, you cannot selectively just install an app. There are too many cross-package dependencies prevent.

    Mylenium

  • Windows Update was not able to verify the new updates for the last 30 days, go to windows update to resolve this problem

    Hi people

    I'm on Windows 8, and in these last days, I get this message

    " " Windows Update was not able to verify the new updates for the last 30 days, go to windows update to resolve this problem"

    It is on a blue banner that goes directly to the screen and it is very annoying

    I get updates through so I do not understand this

    Any help would be great

    PS I have tryied the restoration of the system, and it's always the same

    Lee was soon

    Original title: looking for some help please

    Hi Lee,.

    I had this same problem and it drove me crazy, but I solved it.

    I clicked on the link above that 'Shubham Chin"gave, and in this link all the topic, if you click on the topic" my PC is not responding all by searching for the or to install updates.

    below that it will then say "try to run windows update convenience store", click on that and it should get rid of this very annoying pop to the top and other problems with your laptop... hope I helped :)

  • The product I bought doesn't work! I need help and I was stuck in your 'contact us loop' for the last few days and I'm frustrated. How can I contact you for help!

    The product I bought doesn't work! I need help and I was stuck in your 'contact us loop' for the last few days and I'm frustrated. How can I contact you for help!

    Probably the best place to start is the right forum for your product. This is the forum for Distiller Server, a product used by corporations long dead, and probably not what you have. If you can't find the right forum, please let us know the FULL name of what you paid for (Please check your invoice, as Adobe have a lot of similar products), and we may be able to direct you. Good luck!

  • For the last 2 days everytime I open to MY MSN, it opens in safe mode. I deleted cookies and the history of FF. all other sites open OK. Vista, 64-bit operating system.

    Vista 64 bit OS

    Thanks for the replies, the problem was on the Microsoft site itself and internal glitch for the last 2 days on the garbled causing MY MSN page without graphics and text.

  • 16 June updated blown all my documents for the last 10 days. Any solution?

    Documents for the last 10 days, all my email settings, all memory of recent activity disappeared.

    Hello Craig,.

    Let's see if the files are actually missing or if they are hidden:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/Unhide-files-and-folders/ca46d3ba-1b51-E011-8dfc-68b599b31bf5

    Best regards

    Matthew_Ha

  • FONT SIZE: for the last 8 days the font size will increase from 100% to 75%.

    For the last 8 days the font size will increase from 100% to 75%. This happens automatically. I am not able to change the font size to 100% the normal way. On the desktop, I right click and try to enlarge the icons without result. In Explorer I go down to the bottom right to change the zoom level and try to change the font, nothing helps. The only way I can do it is through the system restore. Can anyone help? Dogscout

    t-4-2

    Changed the dpi that did not work. Police accounted for 70% this morning. I had to use the system again restore.

    Suggestions...
    1 make a check of the file system.
    Start button > Search box type cmd > look up, do a RIGHT click oncmd.exe > click onRun As Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
    Note : there is a space between 'sfc' and ' / '.
    To sit and wait. It will take time.
    When finished, exit the cmd window.
    Reboot (restart your computer)

    2. If the above does not solve the problem. Do a check disk.
    Start button > Search box, type cmd > look up, right-click on cmd.exe > Run As Administrator > in the black and white window, at the command prompt flashes, type chkdsk/f/r > press the Enter key.
    Note : there is a space between 'chkdsk' and ' / '.
    The screen will say something like cannot do it now, but you want to run it on reboot. Click on 'y' as in Yes > press > window cmd of output.
    Restart your computer. Check disk starts after reboot. It will take a while. DO NOT stop the machine. Just wait.

    t-4-2
     
     
  • Get this error on the dashboard for the last 2 days: Please try again later we are working to improve your experience of the Enterprise Dashboard.

    When you try to run the company, I received this error for the last two days.  I have tried using another browser and ended in the same results.

    Please try again later

    We are working to improve your experience of the Enterprise Dashboard.

    Hello

    Your proof of cloud creative's 'VIP' instead of the company, so you would not normally manage your CC on the Enterprise Dashboard, but you had some Digital Marketing rights so that's why you have a dashboard.

    I am informed that currently some adjustments are made to your dashboard for Digital Marketing and that it should end soon.

    In the meantime your creative team of cloud management should be available through creative.adobe.com

  • I have photoshop cc 2015. For the last 2 days it does not open when I double click the icon. What should I do?

    I have photoshop cc 2015. For the last 2 days it does not open when I double-click the icon. What can I do to fix this?

    OK completely reboot Windows 7. When he started to look in the Task Manager under process for photoshop.exe it shouldn't be there. If it is highlighted and press the button end process. Now right-click the Photoshop icon and select run as administrator. Photoshop starts, you should see photoshop.exe in the list of running processes. When you close Photoshop it should disappear from the list.

  • How to set up the filter to provide data for the last 7 days

    Hello

    In our environment of BAM Oracle 11 g, we have a data object that stores a date with the datatime data type field. In the report of BAM, we want to display data only for the last 7 days. Not sure how we can configure the filter to "during the" last 7 days

    Can someone help how to achieve this requirement?

    Thank you.

    Please try the following-
    (1) open the chart bar in edit mode.
    (2) in the editor view, click on the button 'Properties', then go to the tab "Format of the value.
    (3) in the tab "Format of the value", to "apply to" drop-down list, select your datetime field.
    (4) in the contiguous list of 'Catégories', select 'TimeUnit' as the category.
    (5) in the following list of 'Type', select 'day of the week.
    6) click OK/application to see the relevant changes.

    Now you should be able to see the day of the week on the horizontal axis 'Thursday', 'Saturday', etc.

  • calculate data for the last 30 days according to the date of sys

    SELECT DT, ITEMCODE, ITEMNAME, QTY
    FROM   TABLE1
    In above given the query, how do I calculate the details of the amount of the last 30 days, APR, MAY, and JUNE

    As the month during JULY, August, the amount of detail is required for the last 30 days (from sysdate), MAY, JUNE, July

    Please suggest.

    Yogesh

    Published by: user12957777 on July 28, 2010 03:16

    Hello

    CASE expressions can filter data in specific columns:

    SELECT     SUM ( CASE
                WHEN dt >= ADD_MONTHS ( TRUNC (SYSDATE, 'MONTH')
                             , -3
                             )
                AND  dt <  ADD_MONTHS ( TRUNC (SYSDATE, 'MONTH')
                             , -2
                             )
                THEN qty
               END
             )          AS third_month
    ,     SUM ( CASE
                WHEN dt >= ADD_MONTHS ( TRUNC (SYSDATE, 'MONTH')
                             , -2
                             )
                AND  dt <  ADD_MONTHS ( TRUNC (SYSDATE, 'MONTH')
                             , -1
                             )
                THEN qty
               END
             )          AS second_month
    ,     SUM ( CASE
                WHEN dt >= ADD_MONTHS ( TRUNC (SYSDATE, 'MONTH')
                             , -1
                             )
                AND  dt <               TRUNC (SYSDATE, 'MONTH')
                THEN qty
               END
             )          AS last_month
    ,     SUM ( CASE
                WHEN dt >= TRUNC (SYSDATE) - 30
                AND  dt <  TRUNC (SYSDATE)
                THEN qty
               END
             )          AS last_30_days
    FROM     table1
    ;
    

    You can do this with GROUP BY, in addition, if you want to separate for each itemname (for example) lines.

    I guess some things, like what do you mean by the last 30 days.

    If you wish to post a few 9creation TABLE or INSERT sample data) and the results you want from this data, then I could test this.

  • For the last 2 days I have been unable to play UNO. I wonder if something is wrong with the game. Maybe you're the right person to ask; If you would point me in the right direction, I would appreciate it. It is on the site of MSN games, however.

    Gambling problems:
    UNO on the MSN web site has been unavailable for me for the past 2 days. I can't find any information on this subject anywhere.
    Could you please let me know so that I will understand if the problem is with repairs or something with my computer.
    Thank you
    D.Potts

    D.Potts,
    Since this is an MSN online game you should start by checking with their support.  Since it's an online game, you can reset your browser and see if that helps.  If you have Internet Explorer 8 and here are instructions to reset it.

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • To cancel light continues to Flash for the last 2 days on my HP 6500 all on the printer.

    Light to cancel on my HP Office jet 6500 all-in-One Printer E709 help a series continues to Flash for the past 2 days, I changed the thinking of the ink that was the problem, but he did not. I unplugged all caps for about two minutes, then the replugged and nothing helped.  I was doing a copy 2 days ago and the paper stuck, I was able to recover all of the sheet, but since then I'm unable to use the printer.  I can't make copies; I can not print nor can I fax this printer.  What can I do?

    Bob_Headrick thanks for the info but I got intouch with the HP company directly, it seems to be a hardware problem.  They no longer support this printer, but gave a good discounted price for a newer version, I'm happy with.

  • KB2538242 installation every day for the last 4 days(14-17) is this normal?

    Hello

    I was wondering why I have this KB253842 install all update for 4 days last days(14-17) is this normal?

    Just install again and now it seems he still wants me to do again... I saw the story updated and its success since the last 4 days.

    Is this normal?

    Thank you very much... Toni1010

    TONI1010,

    Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

    http://support.Microsoft.com/kb/910339>

    This article also describes how to do to solve the problem when the Automatic Updates downloads and installs the update even repeatedly.

    How to hide or show an update of Windows Vista

    http://www.Vistax64.com/tutorials/72491-Windows-Update.html>

    06/18 / 1112:22: 00 am

  • At my wits end, try to install the office creative cloud for the last 4 days

    I'm trying to download the office cc on an iMac OX 10.10.3 running version. I upgraded especially to try to install cc after having problems. The upgrade means I lost iPhoto / an upgrade due to VM Fusion necessary (I need to run Adobe CS 5.5 for Windows, which is an upgrade of a product I bought until I'm Mac). I spent the last 4 days round in circles on the forums. I have used the CC cleaning tool, past internet service (because at one point, I got an error 201), disabled WIFI, discarded all my Adobe existing facilities (including Adobe CS 5.5 for Windows) and off the Mac several times in the last 4 days in the last 4 years. Desktop CC is (I think) just a 3 MB file. Can't someone just send a file/exe. I tried to access the direct file on a link suggested by a member of the staff of Adobe on the forum, but access has been denied. I want to get Windows on my Mac. I just want a trial of photoshop and lightroom. Please help.

    Click on the link below and open Photoshop Elements download page.

    Just keep the page open.

    https://helpx.Adobe.com/Photoshop-elements/KB/Photoshop-elements-10-11-downloads.html

    Then click on the link below and download Adobe Creative Cloud Installer direct file. :

    http://trials2.Adobe.com/AdobeProducts/KCCC/1/OSX10/ACCCx3_0_0_74.dmg

Maybe you are looking for

  • Installation of ITunes for Windows 10 and get some error messages

    Try to install ITunes as well as the installation will not end.  Keeps telling me that he needs AppleApplicationSupport to finish so I run the. EXE who independently before ITunes and get a failure during that move as well.  This is the latest versio

  • HP Pavilion will not start the power upward

    I have a HP Pavilion (prod. # GG753AV #ABA) running under Windows 7. Power on, the switch lights up blue, fans are taking place but not boot upward and no display I tried unpluggin keyboard etc but no luck Thanks for any help

  • KitKat 4 jelly Bean

    Is it possible to update the E380 liquid Jelly Bean 4.2.2 to KitKat 4 Acer? And if so, HOW?

  • HP ENVY 55303: cannot find how to process and print envelopes on HP ENVY5530e

    Good evening everyone. I'm having a hard time trying to attack and to print envelopes on my new printer. It is obvious that I'm either doing something wrong or not the good thing or both. Grateful if someone could take the penalty and an amateur thro

  • Power led green blackBerry smartphones

    Yesterday, I bought a new curve after an accident with my cat and the previous curve. News is a flashing green led power. Is it a defect or if I can change a setting somewhere? Thank you Vicki