I would like to add an ssd for my pavilion DV7-3090ED

Similar Questions

• I would like to add an ssd for my pavilion dv7

  Hey

  I own a pavilion dv7 4050eb, and I'm looking to add an ssd.

  It has 2 compartments to put a hard drive in my notebook, is currently being used, and the second is empty.

  So I thought that it would not be a problem.

  But when I went to my local computer specialty store (where I bought this laptop), they told me I will not work if the cable connection for a second hard drive and support was not provided with my laptop (which is you case) because they can't get those of HP, no matter how hard they try.

  Is there really no way that HP can provide these simple parts (cable and support)?
  And if I could get those, would there be any problems whith install an ssd in this specific book?

  Thanks in advance.

  You can find the part number for the hard disk hardware kit in the guide Service & maintenance dv7. You can order the part of sellers online or directly from HP online parts store.

  

  Hard disk hardware kit (not shown, includes right and left mounting rails,)
  cable connector, Mylar cover with tab, 4 screws and 4 rubber Insulators) HP p/n 605415-001

  Yes, you can add a SSD. Your laptop might even have been bought with a SSD when ordered online.

• I would like to add an ssd on my pavilion dv 4217

  I would like to replace my HDD with a SSD in my HP Pavilion dv 4217. Is this possible? Can I use the disk as a second HD?

  Thank you very much. I think I'll go for an upgrade from my old laptop. It is not usually recommended, but I don't want to get a new one now. I'll go for a Tablet and let the laptop market unravel.    Bill

• Add the SSD for HP Pavilion desktop computer

  Hello

  I would like to add an SSD for my HP Pavilion 500-035ed (office). I do not want to replace the existing drive, I would add a second drive.

  I have already noticed a free sata connection and a free power cable, but I didn't notice a physical position for the support and the screws etc...

  Does anyone know if there is a manual that describes the physical position for a 2nd drive in HP Pavilion 500-035ed (office)?

  Thanks in advance,

  S.J. Westra

  Hello

  Look at the picture below and see if your model is configured for one SSD installation.

  

  I see that your particular model is native/sold to the Netherlands.  There is a forum member that frequents this forum who lives in the Netherlands. Hmmmm that's a good guy!

• Pavilion 15-au027cl: I would like to put an SSD in my Pavilion 15-au027cl.

  I would like to put an SSD in my Pavilion 15-au027cl, is it possible?  If that is what is most campattable MFG. ?

  Hello

  Open this laptop could take hours with the right tools, why is this work for parts of authorized service provider .

  The first manual in the following link shows how:

  http://support.HP.com/us-en/product/HP-Pavilion-15-notebook-PC-series/10862158/model/11992173/manuals

  Still, this book is intended to parts of authorized service provider

  Kind regards.

• More large SSD for my Pavilion Dv7-6c43cl

  Hello

  I was wondering what the largest SSD to put as a 2nd drive in my laptop? CSSD-F240GB3A-BK is a Corsair 240 GB SSD, Sata III, I was looking at. Can I put a 512 GB SSD laptop?  Also, where can I get the screws and cable and anything elso I need?

  Thanks for your time and God bless you!

  Stem

  You can put big an SSD because your wallet will allow.

  The housing and the cable can come from

  www.newmodeus.com

  It is the cable, do not know if you also need a shopping cart:

  cable

  You really want to install the SSD as drive. Ask an SSD for the second disc just for storage, that's like asking the Secretariat to take a hack in Central Park. It will work but what a loss of speed.

• HP Pavilion dv7 / LM00EA #UUW: upgrade of the possible SSD for my Pavilion dv7?

  Hello

  I want to upgrade my computers hardrive portable SSD-Drive. It says on my laptop service guide that only intel based model supports on the ssd drive. However, my flag has AMD Turion. Anyone would confirm, weather, I can upgrade the HDD-> SSD?

  In addition, if the upgrade is possible, can I install the current HARD disk drive in the second location on hard disk? If so, are there needed additional cables/adapters.

  I tried to find this info on the HP partsurfer, but no luck.

  Any help much appreciated...

  News of the laptop:

  HP Pavilion dv7 / LM00EA #UUW

  Kind regards

  Jarno

  jhuuskonen wrote:

  and the number of products. It's actually3EA #UUW (zero, zero) LM00. Sorry, my bad.

  Hello

  Much better now. The following link shows the specifications of your machine:

  http://support.HP.com/au-en/document/c02776731

  It's a HP Pavilion dv7-6010eo. Currently it has 500 GB SATA (7200 RPM), you can switch to the SSD. You can also put a second HDD of your machine, but you need to caddy and connector. Please visit the following link:

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info & products_id = 379

  Kind regards.

• How can I add second disk for HP Pavilion DV7 4045EA

  As I disassemble the lower part of the laptop, there's clearly a secondary HARD drive Bay. I have no idea what do I need to connect another SATA drive it. The primary one is connected directly to the m/Board, but there is no connector at the other. Thank you in advance for help...

  Hello

  You need an craddy and cables (complete series) to go with it. Also, please watch this video:

  http://www.YouTube.com/watch?v=EZgiX-pzdL8

  Kind regards.

• I already subscribe to photoshop with 2 pc, but I would like to add another 2 pc for a total of 4. [was: help me!]

  Salve,

  avrei aiuto need my non parlo in inglese.

  Sono gia Abimael con photoshop 2 pc, my I would add other 2 pc per UN total 4 di.

  Come posso fare? A chi posso rivolgermi visto che funziona not the cat?

  VI want

  Hello
  I need help, but I do not speak English.
  I already subscribe to photoshop with 2 pc, but I would like to add another 2 pc for a total of 4.
  How can I do? Who should I contact because the cat does not work?
  Thank you

  If you are going to use a computer at any time, you can use your subscription single user one for all 4 computers.

  You can only connect, until, two computers at all once so you will need to do a few signature, but adobe make it very easy to do.  for example, you can disconnect from your other 3 computers using your computer 4.

• Hi, I would like to add an image in my video for 2 seconds, then only within a framework of the video running (to cover some part of the picture in video for 2 seconds. Is it possible to do?

  I would like to add a photo in my video for 2 seconds, then only within a framework of the video running (to cover some part of the picture in video for 2 seconds. Is it possible to do?

  Just add your photo on a higher video track, it will cover up to a below. You can use the effects of movement to move and scale the image.

  

• Error adding media: Audio. M4A - when you import a generic error has occurred, I would like to add a music file in mpeg4 in first 12, thanks for the help

  I would like to add a music file in mpeg4 in first 12 and get:

  Error adding media: Audio. M4A - when importing a generic error has occurred, please help

  gjneudert

  First 12 items on what operating system? Have you updated 12 12.1 still using Help Menu/updates to date of an open project update. Please do.

  But your question immediately...

  Your music is on iTunes?  Please convert your file into WAV version using iTunes, and then import that WAV version in the Premiere Elements project using the first elements add Media/files and folders.

  If you need assistance with how to convert iTunes, please ask.

  iTunes: how to convert a song to a different file format - Apple Support

  We will follow your activity and results that your schedule permits.

  Thank you.

  RTA

• I would like to add a password

  I would like to add a few passwords for saved passwords

  You can watch this extension:

  • Saved password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

• I would like to add a counter reset natively SignalExpress

  I would like to add a counter reset natively SignalExpress without calling a VI.  I have a variable based on samples taken.  I'm countuously of sampling every half second using hardware USB-6008.  I want to count to 15, then add 1 to the variable B, then reset the variable 0 and loop.  Can I use a conditional repeat execution or execution of sweeping control control?  Thank you. David

  I re read your original post and it seems to me that the task is to count the pulses of a clock of the half second.  The count should be stored in a variable U32, "TicsTot."  Given that the task is to roll on the count 15 + 1 = 16, then it's just four bits (4 b, 2 ^ 4 = 16) arithmetic and a digital computer, it's easy.

  Continuously to calculate another U32, "TicsA' alias 'A', who are the least significant four Bits; and another U32, "TicsB" alias your 'B', which are the most significant Bits truncated right four bits.  When TicsTot is generated, and then simply use a step formula where Result = int(TicsTot/16) to calculate the TicsB, then another step formula where Result = TicsTot-(TicsB*16) to calculate TicsA.  It's all simple bit manipulation.

  So how do you TicsTot?  Simply pass your acquisition at the stage of statistics and output the number of samples, or TicsTot.  so:

  Gain step - signal acquisition with 0.5 seconds period, output signal, right click on the output of the step and and rename it "Signal".
  Out of step - "Input Signal", 'Nb of samples' statistics.
  Formula step - entry 'Nb of samples' as x 0 and formula = int (x 0/16), right click of processed data and rename it to "TicsB".
  Formula step - entry 'Nb of samples' as x 0, entered "TicsB" as x 1, formula = x 0-(x 1 * 16), click with the right button on the processed data and rename "TicsA.

  I think this is the solution for the task you sketched out.

• I would like to "add a new e-mail account" (hotmail) to MS Outlook.

  Hello

  I would like to "add a new e-mail account" (hotmail) to MS Outlook.  Seems I have to 'manually configure server settings.

  Please tell me: Hotmail is a POP3 account, correct?  (Or is it IMAP or HTTP)?

  Also, what should entries for "Incoming mail server" and "outgoing mail server"?

  And about 'connection details' (username and password), log of information for what exactly?  Asked am me my user name Hotmail and password again, who has asked to the previous screen?

  Thank you!

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• I have creative photography of cloud. I would like to add Indesign to my subscription. What is the best way to do it?

  I have creative photography of cloud. I would like to add Indesign to my subscription. What is the best way to do it?

  Go here for pricing and membership creative cloud plans | Adobe Creative Cloud and add a subscription from