I would like to print from laptop to the printer at home. Printer is connected to the NetGear router ethernet
HP PAvilion dv1000, Windows XP
I would like to print from laptop to the printer at home. The printer is connected to the NetGear router ethernet.
I was able to print wireless from laptop to HP Officejet 7310 all-in-one, but now all I get is document to print message' failure '. " I can get documents to print on the printer using my smart phone, but not the laptop.
I used the "find printer" button on the print screen and can see the printer to select.
Any suggestions?
Figured it out after watching a few other posts...
Configured the printer port IP address and now it is printing perfectly.
Thank you to have messages out there for review.
Tags: HP Printers
Similar Questions
-
I would like to put my laptop on the side screen
I would like to put my laptop on the side screen.
I tried
CTRL + Alt + arrows and on the right, click on graphical desktop Option Rotation without success.
All ideas
On Tuesday, February 22, 2011 22:49:54 + 0000, market Burwell wrote:
I would like to put my laptop on the side screen.
I tried
CTRL + Alt + arrows and on the right, click on graphical desktop Option Rotation without success.
This possibility exists on some screens and some laptops, but not all. I have
is unclear, given that you don't tell us what laptop you have, but it
may not exist on your.Ken Blake (MS-MVP)
-
It's time to clean up and reorganize the My Documents folder. I think I can have subfolders duplicate in my main files listed in the Documents. I would like to print a list to find and delete these folders.
Any suggestion is appreciated!
Thank you
Dan
It is a forum for Windows 7 with tips on Windows 7.
Windows XP is different, these instructions will not apply.
You can open a command prompt in Windows XP, then use the CD controls to get the folder you want.
If you have installed the Windows XP command window open herePowerToy* then this can happen more quickly - to aid that allows to simply right-click on any folder & open a command already defined for this folder.
* There was also formerly a very convenient Explore of PowerToy here but that is no longer available from MS - you will find perhaps at cnet or another download site.
There is also a Windows XP forum.
-
To print messages in Gmail, I used to click on "Firefox" in red at the top left. I upgraded and now it's gone. I would like to print an email I received. How do I do that?
Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Ctrl + Shift + F).
You see the orange Firefox button if the menu bar is hidden (view > toolbars).
If the menu bar is hidden, then press the F10 key or hold down the Alt key to make the call of menu bar.
Make toolbars like the toolbar 'Navigation' and the 'personal bar' are visible: "view > toolbars" or "Firefox > Options.
-
I would like to print a directory of files in a folder. How to do this in Windows XP Home Edition.
Thank you.
Roman_XB
I'm glad to hear it works, can you please mark the post as answer... to close this thread...
-
I would like to print a JPEG on paper is possible on the 7520-e
Photosmart 7520-e
Hello
I would like to print jpeg images on plain paper on the 7520-e 8 x 11 or 8 x 14. The printer doesn't let me do it without using photo paper.
Is there a setting I'm missing to do this?
Thank you
Don Wood
Hello
Yes, please select the main tray. What software use to print? And what is the operating system of your computer?
Kind regards.
-
I would like to revive my laptop to its factory settings, but I don't have the cd that came with it. is it possible to do this if my laptop?
How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.
They will tell you how to do this.
Every computer manufacturer has their own way of making recovery disk/s.
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
Save all data, because it will be lost during a clean installation.
See you soon.
Mick Murphy - Microsoft partner
-
I would like to print the darkest possible black.
Hello
I would like to print the black as dark as possible on this design... it is a transfer of Silkscreen and is the only black. In older programs, Ive set preferences to print glossy Photo rpm, and that came out of the dark night. However, I can't seem to find an option for this in Illustrator. I tried several settings, but they all seem to be the same. How can I accomplish this?
Thank you
Assuming that you print in CMYK mode, use 60/40/40/100 for your black instead of 0, 0, 0, 100.
-
CS6 is compatible with El Capitan? I have multiple problems, mainly with InDesign, that is broken, disappearing type elements, limited cancellations, low memory warnings. I would like to hear from someone representing Adobe on this.
Many people find such problems with CS6 in El Capitan. There will be no update for CS6, it has reached its end of life.
You must go back to the previous version of the operating system, or upgrade to creative Clud.
-
Hello, I would like to get a refund for the software purchased from Adobe. I have 14 days to do so, but I can't find the place to cancel the order.
Thank you!
You may please check out the link below for instructions on cancellation.
Cancel your membership creative cloud
For more information you can contact the Support from Adobe by clicking on the link below.
Please make sure that you are connected to the right Adobe ID.
Hope this will help you.
Kind regards
Hervé Khare
-
I would like to know how to encrypt the phone to stop access to my data
I'm fine back my iPhone 5 for a 6sPlus of the iPhone. Before doing so, I would like to know how to encrypt the phone to stop access to my data. I was told that everything simply erase the data without actually deleting...
< re-titled by host >
What to do before you sell or give away your iPhone, iPad or iPod...
-
I would like to save Web pages in the *.mht format as in the case of Internet Explorer. PL let me know if this is possible? Page should be registered in single file, sound very convinient
Two extensions that will "make" MHT files.
UnMHT extension:
http://www.UnMHT.org/UnMHT/en_index.html
File MHT watched one/recording in Firefox/Mozilla Suite extensionMozilla Archive Format - MAF
https://addons.Mozilla.org/en-us/Firefox/addon/212 -
I would like to know how to manage the ASN.1 encoding/decoding in LabView?
I would like to know how to manage the ASN.1 encoding/decoding in LabView? Hello J,
in the example given here , it looks like a format simple bytestream...
You must read the byte stream, get the first and the second byte to decode the data type and length and then read & catalogued according to number of bytes. And then read 2 bytes and so on...
Encoding will work the same but in reverse
-
I have a Dell Dimension 3000, service Pack3 & I would like to know how to reinstall the operating system xp professional.
Thank you
Dee
Check maual of the user of the ignition key (e.g. F11) you need to press on when you first ask the computer to access the XP restore partition. If you have a "restore CD" the game that the BIOS so that the CD-ROM drive is the 1st device to start, followed by the hard drive. then power on the computer and "press any key" when prompted to start the installation.
J W Stuart: http://www.pagestart.com
-
I would like to know how to remove the box/cursor information dialog box that appears whenever I have stop my mouse on an object.
Have you tried to uncheck both options via Control Panel / folder Options / View?
"Displays the size of file in folder tips".
"Display descriptions pop - up for folder and desktop items"
Maybe you are looking for
-
Impossible to find Apple pay on my Iphone
I recently bought a SE IPhone and I can't find the tab "Wallet & Apple pays" in my settings of any help?
-
Where can I download the dynamic Cache Service for Windows Server 2008 R2
I found the helpful http://support.microsoft.com/kb/976618 note and want to d/l the dynamic Cache Service. Thank you Robert
-
problem with your safety device
my security device has stopped working properly, because a compatible driver is not available for the version of Windows I have. the safety device I have is BCM588
-
How can I remove "windows multi control system.
does anyone know of the 'windows multi control system', software trial version, how do I remove it? He wads indicated as a trial version, I do not want to buy it, it now break all, and it seems that I have to buy it.
-
Update the window asking me to install visual c++ 2005 and 2008 sp1. Do I need to install on my machine? I'm under win xp edition family pro on a Dell 3000 with 1.25 GB of ram.