i365 with rubber antenna

I apologize in advance if this question has already been addressed (I'm new here).

I read here & here that "rubber duck" antenna on the i365 only increases the signal nor the antenna reception foldable stock when it is extended. I do not pretend, but I find that hard to believe.

Does anyone have a real and actual experience with the i365 comparing the real signal with the antenna reception folding stock extended compared to the rubber duck antenna?

No solid info and will be much appreciated.

Thank you

-iDENrocks

Well, I can answer my own question now. The answer is Yes, the i365 with fixed antenna of rubberized performs much better at holding calls and holding them clearly from the antenna expandable stock.

I tested my new i365 with rubber duck antenna in social areas in California and Maine, and she played even better than I hoped it might.

I also compared side-by-side with my i580 to CA and the i365 with antenna fixed, rubberized holds calls significantly better than the i580 in the areas of signal low iDEN.

Tags: Motorola Phones

Similar Questions

  • Qosmio F60 - L10 - how to set up the tv with integrated antenna tuner?

    Good evening
    I have a toshiba qosmio f60, I read your answer about tv tuner.
    My question is: how to set up the tv with integrated antenna tuner? Thank you

    The tuner is already configured!
    You must use Windows Media Center.
    Here, you have to choose the tuner and need to look for available DVB - T channels.

    Notes; Signals DVB - T depends on the country and region.
    In my area I needed an external antenna because the signal is too weak.

  • WAP 200 with external antenna

    Hello

    I connected an external 12dBi omnidirectional antenna for networks 2 .4GHz (TL-ANT2412D) with LMR-400 cable, 5 M

    but my antenna "emit" nothing, I have no signal. With the two antennas supplied with WAP200 I signal but does cover all of the desired area.

    Could you tell me what setting to change?

    Thank you.

    Hi, my name is Eric Moyers. I am a network Support Engineer in the Cisco Small Business Support Center. Please use the Forums to Post community of Cisco.

    The WAP200 is 1 X 2 MIMO, which means that it transmits on an antenna and receives two.

    (1) we do not support the 3 antennas of the party.

    (2) I would try attaching the antenna 3rd in Group at the other station.

    I know that customers who have had success by adding 3 antennas of the party, but there are no promises.

    Thank you

    Eric Moyers

    Support of Cisco network engineer

    SME HWC Wireless and monitoring

    CCNA, CCNA-wireless

    1-866-606-1866

  • Need for an AP with two antennas for omni antegrated

    Hello

    I need an Access Point with 2 Omni antennas integrated. The 1130G meets my needs?

    Thank you.

    The 1131AG built in omni antennas for 2.4 GHz and 5 GHz range. The 1131G built in omni antennas for 2.4 GHz.

  • No socket antenna/cable on dv7t-3000 with built-in HDTV tuner

    My question to you all is 'out there', your laptop has come with an antenna/cable intake when you ordered the tuner?  The antenna connector and the cable with my laptop came with circular plugs that look like they would a 'white' circular on the right side of my machine.

    Unfortunately, when I talk with various people at the help desk, I have been informed a) tuner with an antenna, b) inability of the tuner to pick up a signal (without cable connection) is a performance issue that is covered by a disclaimer clause in the integrated HDTV hybrid Tuner HP help me decide to text, and c) must be ordered separately.

    Would appreciate your comments before doing a * outa' me calling to order a plug...

    Yes, I have the HDX 18 with tuner and it came with an antenna that plugs into the right hole next to the power connector antenna, and it came with an adapter that you can plug a coaxial cable in also.  I've never heard a computer tv tuner with a built-in antenna.

  • Number of antennas router question?  (Several gadgets WiFi using 1 router)

    -My House is a 3 storey 5 bedrooms single family home.  There are 4 people living under his roof and each person has at least 3-4 items wireless who rely on our network domestic wi - fi.  Include wireless iPhone 2 of 6, 3 iPhone 5, 2 iMac (an older and a new one), 1 airbook, 1 MS Surface, 2 older laptops Apple (the old 1 "thick white), 2 iPads, Kindle 1-2, frame 1 photo wireless, 3 printers, wifi, 1 Sony PlayStation4 (via wifi) and much more.

    Our current router is a double (2.5 and 5) and we use them both, and we had recently a technician change the channels, so we are not in competition with the neighbors.  The router signal strength is strong in the home to most of the places.

    My question: with so many features, would be useful to have several routers with multiple antennas to accommodate this request, or made this same question?

    My current router has 3 visible external antennas.  I read that the Airport Extreme has 6 internal antennas.  I'm ready to go buy Airport Extreme, if 3 additional antennas can help, or if I can use two routers for a total of 9 antennas (if this is important).

    Our services to wide band is xfinity and we have one of their fastest options.  Not quite the 105, but about 80.

    Any suggestions?

    Several wireless routers will tend to work better than the Gothic pulpit super multi-antenna a monster looking for router.

    But they all need to be connected with the ethernet.

    Read how to get excellent wireless in your House.

    http://www.SmallNetBuilder.com/basics/wireless-basics/31576-the-best-way-to-get-ensemble-Maison-sans wire-coverage

    External antennas tend to be more effective than internal, but the actual number of antennas is easily overrated.

    Most of the antennas used on routers now are dual band... which means inside the plastic, they have sections for the two bands... If an antenna is really two.

    Our current router is a double (2.5 and 5) and we use both

    Is what model exactly? Of basic etiquette please.

    We had recently a technician change the channels, so we are not in competition with the neighbors.  The router signal strength is strong in the home to most of the places.

    It would have been correct for the first 5 minutes after the technician left the House and then totally out of place. Channel of all the equipment that surrounds you change every day, every hour... maybe every 5 min. While I don't disagree with fixing channel... others would say that it should be left on auto. You gain nothing much at all.

    If the signal strength is good over a 3-storey house, you are incredibly lucky.

    You can't effectively add routers more unless you install ethernet to provide an infrastructure for data streams.

  • AirPlay works do not with iPad to AppleTV

    Hello

    So, for the last few days I tried to get the airtime to play videos from my iPad but it gets stuck on the loading circle.

    IPad is Ios9.2.1, I don't know what is the version of the apple tv.

    The strange thing is that without change of settings, the airtime used the week last with no problems sending video from the youtube app and plex and google chrome.

    Now plex and videos Google chrome app just remain constantly loading. the youtube app works with the antenna but nothing else.

    Mirror mode works, but then I can not get the video full screen.

    Internet high speed is not a problem, and interference should not be a problem I tried to move everything off the power outside of the apple tv, router and iPad and it still does not work.

    Is anyone able to shed some light on this problem?

    Thank you

    Once you start to play, to turn briefly walk AirPlay on iPad. It worked for me.

    Please check your version of ATV and report it here. This identify your model of Apple TV - Apple Support should help.

    If it's 4 ATV, go into the settings and check the version of the software. First of all, we have experienced this phenom with tvOS 9.2. You may have updated your ATV software recently, triggering the problem.

    If it suits it, you should report it to http://www.apple.com/feedback/ reports more, better.

  • Could not find the wifi on 2006/2007 mac pro antenna cables

    I just installed an Airport card in my Mac Pro to 2006 but I can't find the antenna inside the case cables? Does anyone know where they would be located? Included with every Mac Pro models, or is mine were too old for this? I have experience with this stuff, but I don't want to spoil anything.

    Thank you

    Luke

    Update: I found them under the logic board

    Google search shows that the 2006 come with the antenna cables. By

    d-in-an-Intel-Mac-Pro/ http://meanderingpassage.com/2007/07/18/How-to-Installing-an-Airport-Extreme-car

    Then can be hidden under the logic board.

  • The Pavilion Elite HPE475 need an external antenna to a wireless connection?

    I just bought this machine and have had problems with a poor quality since the wireless signal. HP technical team came up with all sorts of different explanations, and I even had to send for the "repair" because one of them think that the wireless card was defective. The last time it's because he needs an antenna.

    Can someone confirm if this machine wireless card requires an antenna to be connected to the two screws Golden at the back of the computer? What is the answer, or just another diversion?

    I was not sent an antenna with the computer, it may be a mistake the part of HP. I can connect to the internet, but usually get that two bars on the signal, while my old computer has always had five bars, as do other computers on the network. The connection keeps dropping out and is extremely slow to load at times.

    Any help would be appreciated.

    Hello

    I suggest that you take a look at what came in the box.

    The low-profile wireless network card should have with an antenna and two cables with connectors from red and blue to differentiate the connection to the wireless card.

    The service center may be assuming that you already know that... All the wireless cards that come with desktop computers have a connected external antenna with cable to the wireless card.

    This image is an example. Some cards equipped with antennas that screw directly on the gold screws. Most 802.11 b/g/n card look like this.

    Please report anything that is on the label with bar code on the back of your PC, except the serial number. The HPE475 is not a complete description of a PC.

    Best regards
    ERICO

  • Mac Mail will constantly be disconnected with Time Capsule

    It has been ongoing for more than a year: I the time Capsule AC version (bought fall 2014) and uses a Macbook (version slim retina released in March 2015.) 12 "I am constantly the mailbox in offline mode in the Mail from Mac application.  The status bar displays "Error of account" and when I click on the error box, it gives the following message:

    DRAW THE ATTENTION OF

    There may be a problem with the mail server or the network.  Check the "iCloud" account settings or try again.

    The server returned the error: connection to the server "p15 - imap.mail.me.com" on default ports has expired.

    If I temporarily turn off Wifi and turn back on right, the error messages disappear and download new messages.  Everything works fine for a few hours, and then I start to see those! exclamation points! next to my mailbox.

    Initially I thought it was a problem with the Macbook.  They did a replacement under warranty of the wifi module into the Macbook.  Still the same problem.  So yesterday, I noticed that my iMac 27 "retina is sometimes as well.  And also, it is fixed temporarily by activating / disabling wifi on and outside.

    Interestingly, my business partner, who has the same version AC Time Capsule and retina macbook 12 "even I experienced the EXACT SAME SYMPTOMS in his house.  (Mailbox log in Mac app, remedied temporarily by activating / disabling wifi power).

    It's to drive us both crazy.

    Both have tried to remove the email accounts of our Macs and rebuild them.  Still the same problem.

    Is there a problem of connectivity between the time Capsule AC and some Mac computers?  I do NOT notice the problem when I'm connected to all other routers in other locations and mobile.

    If anyone has a thought on this, I would appreciate it a lot.  I am about to replace my Time Capsule with another brand of router in order to solve the problem, but all other routers are so ugly and I don't want some Darth Vader looking black thing with 8 antennas in my living room.

    I assume that you are running the latest OS to el capitan?

    The iMac is also updated for later?

    El Capo had e-mail problems... so I assume also that you have updated to the latest patch.

    Your experience with the laptop when you suggest that mobile are still correct... It is the TC at fault.

    There are known problems happening... not universal, which is a shame because then it would be imposed on Apple to fix... but it is not uncommon.

    I would recommend a reconfiguring of the TC... See the list below.

    I understand your network a little better.

    1. what modem do you have? Brand and model please.

    2. your ISP using IPv6 or spend now?

    3. is the work of TC as main router or bridge? (The answer might be inherent in the 1st quarter, but if it is a modem router I need the exact details).

    4. is the modem, also located in your living room... If you run ethernet instead of modem, a router could be installed right next to the modem... and the TC has changed to the bridge? It can work perfectly as a WAP right and for the TM backup when you remove its role in the delivery.

    Darth (breath in) Vader (exhale) Asus or Netgear router... which I suppose you don't not aesthetically... get to work extremely well.

    Start from a factory reset. No files are lost on the drive hard in doing so.

    Universal factory reset

    Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

    NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

    The installer the TC.

    And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

    1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

    for example TCgen5 for the base station and the name of the TCwifi wireless.

    If the problem is using wireless TC24ghz and TC5ghz with fixed channels like this also seems to help stop school dropouts. (I recommend you do cela.. 2.4 ghz 11, 9, 5 GHz use 36 or 149)

    2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

    3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

    If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

    4. check that your share on the computer name does not change... (It was mostly from the Mavericks)

    Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

    5 attach the TC disc into the computer manually. (Expired for El Capo... just use Finder...) Connect the box below search)

    In Finder, go, connect to the server in the main menu,

    Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

    You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

    However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

    6. ensure that IPv6 is set to link-local only in the computer. (Depends on your ISP and if they moved to IPv6.. e.g. comcast).

    For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

    In the TC configured only IPv6 local link... assuming you're on IPv4 yet.

    It is very important with some ISPS like cox cable at this time.

    It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

    You may need to do more work on the computer itself. for example, to reset the NVRAM/PRAM/SMC... helped some people. A clean installation of the operating system is also useful if you update installed.

    These changes could amount to little more... practical household good network... but I salute them as a starting point.

    It's going to ruin your Time Machine configuration... So if you change the TC its location in the network name must be passed to TM... so open TM preferences and put the backup to the new location. TM will then say that he will make a new backup... once he starts, he will find the TC and original backups... check it out... and then do another differential... so no problem. If you are prompted to you want to use the old and new locations of backup just say a new.

  • Re: Satellite A350 - taken of FM tuner antenna is not stable

    I have an antenna for my internal FM tuner with NXP software. My problem is that when I plug the taking of antenna into the socket and push it so that it is 'inserted' fully and stably I can't catch and tune in FM stations (all I get is static heavy)- but when I balance the half and half out he grabs FM very clearly but is unstable and could fall if the laptop is moved slightly.

    Is this internally with all antennas provided for FM such as an A500 Toshiba.

    Mine is an A350 of the India

    Looks that can be broken. The much looser decision-making is now compared to-for say a month ago?

  • Can I use tuner TV with Tecra A7?

    Hello!
    I have a Toshiba Tecra A7-113 laptop, I want to add a TV tuner.
    This laptop comes with a built-in ATI display.
    I will consider purchase an ATI (PCMCIA) for all TV TUNER works well?
    In the past, I use to have a desktop pc with an ATI display and I have faced a problem with the TV Tuner, because none of the tv tuner that I tried worked enough, I was forced to buy a Tuner of the ATI TV.

    Thanks in advance.

    I recently bought a stick USB TV of Ebuyer (approx. £22) to my new laptop (1 GB of RAM + clocked at 1.6 GHz). It works well with my antenna v external (told me that without an external ariel, it is useless). It is fantastic for me because I can watch TNT on it now. the only problem I have is that 1. He can't pick up Channel4 + ITV 2. Sometimes the screen hangs if I move the cables too.

    It'd b interesting for me to know if it is better to have the TV tuner u mentioned or even.

    Lisa

  • Qosmio F20 - lack antenna adapter?

    I just bought a F20-137, but the antenna adapter was missing from the box. According to Toshiba customer service this is not sold separately and that I should return to the vendor (PC World in the United Kingdom). I did and they do not have cable and don't get all Qosimos more in stock. They offered me a USB TV Tuner which is not what I want.

    Has anyone else had a similar problem?

    Anyone know how I might be able to get the card, if it exists?

    Concerning

    Chris

    Hello Chris

    With the antenna adapter do you hear on cable that allows to connect the composite cable into a port on the right side of the laptop?

  • Satellite A75 - switch wireless works only with the Intel wireless network adapter

    The Atheros card that came with my Satellite A75 had questions, so I installed an Intel 2200.
    According to Device Manager, everything works and is properly installed and should work, but the message I get is the wi - fi switch.

    It is placed at the position, but the indicator light lights up and the Intel card does not connect without it. The light comes on with the Atheros, but this card hangs the system.

    A few months ago, I borrowed an Intel 2200 on an IBM and put it in the A75 temporarily and it worked fine, that's why I bought the Intel.

    I tried the FN + the button with the antenna, but no effect, even if it also works with the Atheros.
    Y at - it another way to activate the wi - fi in addition to the switch and the FN, or is there a way to disable the switch function if the computer doesn't even know it's there?

    Maybe it works.

    Thank you.

    Solved! If anyone has this problem, here is the link to fix:
    http://www.TechSpot.com/VB/all/Windows/t-18046-p-2.html

  • Tecra M4 S435 US Version Bluetooth antenna - cross-post

    Hello

    It is a cross-post from the Commission of TE and Tecra message. I decided to write, because I'm not sure I'm supposed to use my Bluetooth antenna for. It's a mystery to me. I bought a pre-configured Tecra M4 with Bluetooth antenna (I don't think it's the same as the Bluetooth Module) and I can not connect any bluetooth device. Also the FN + F8 does not work. Can someone explain to me please what is the Bluetooth antenna.

    Thank you
    Sevi

    Hello

    Check this site:
    http://cdgenp01.CSD.Toshiba.com/content/product/pdf_files/detailed_specs/tecra_M4-S435.PDF

    You will also find compatible parts for Tecra M4.
    You can use the Bluetooth PA3425U-1BTM Toshiba compatible module kit

    Well, this Bluetooth module you can order from Toshiba service in your country or if you use any other device Bluetooth (Bluetooth USB or Bluetooth PCMCIA card key)

Maybe you are looking for

  • I get a window asking me if I want mozilla to make changes to my computer every single book I open my browser

    I click on the firefox icon to open my browser and whenever I do, I get the window asking me if I want mozilla to make changes to my computer... I am so sick of this please help me to stop.

  • P2035: re: print letterhead on P2035

    I have a user tries to print on white paper, but for some reason, the bleeding from the letterhead on the rest of the body of the document. A document in the same way weighted with the same header but parchment in color, print very well. Anyone this

  • Windows media player no sound

    checked the settings. system cannot find the device. system regular sounds r fine. has worked fine b4 I "upgraded" from win xp home edtn for win xp pro. Have service pk 3.I AM NOT computer then PLEASE, DO THIS SIMPLE 4 ME. Thank you!

  • BlackBerry, Blackberry Leap Leap keyboard

    I just bought the new Bond and so far am loving. However, I have a problem with the keyboard. For some reason, the keys on the keyboard are always uppercase, even when I type in lowercase. So the text I type is correct, being either higher or lower,

  • Access denied, connect with permissions of Directors, and then try again

    OK some time ago, I got sims complete collection and it did not magically until recently. Everytime I open it it play the above message appears. I tried as admin (although im on an admin account) doesn't load, uninstalled and reinstalled it, nothing,