IAAS custom intallation fails in repository models install ##InstallRepoModel

Similar Questions

• Protect customer error when you try to install Windows Defender.

  Download windows Defender

  Download defender of windows after an error of installation of the process because of the protection of the customer how to remove this for instalation can continue?

  Hello

  1. have you installed Microsoft Security Essentials on the computer?

  2. do you have anti-virus software installed on the computer?

  If you have installed Microsoft Security Essentials, it has its own antimalware feature. You don't need or want to install Windows Defender, too. Leave MS Security Essentials installed and do not turn it off.

  Check if that helps.

• User of Vista Home Premium (preload), KB2742595 and KB2789642 fail to update/pre-installed to update. Any suggestions?

  I am user of Vista Home Premium (preload), two important updates: KB2742595 and KB2789642 fail to update/pre-installed to update (tried on more than 1 occasion, individually and collectively). There have been other updates since that successfully updated. Any suggestions? Thank you very much.

  See the RESPONSE message in this thread-online http://answers.microsoft.com/thread/5b39ddc7-8b23-4459-9bf4-c1e0d6c07437

• Windows update fails to download and install updates and cannot start defender and windows firewall.

  Original title: windows update fails problems to download and install the updates and windows firewall and defender will also not start?

  Windows update fails to download and install the updates and defender and windows firewall will not also start? What can I do?

  Hi Speete66,

  ·         You receive an error message or error code in Windows Update?

  ·         What happens when you try to start the windows firewall and windows defender? You receive an error message?

  ·         You have any other antivirus software or protection installed on the computer?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to consult the article in the Microsoft Knowledge Base and check if it helps.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

   

  Method 2:  If the method above does not help, then you can reset Windows Update components and check.

  Reset Windows Update components.

  http://support.Microsoft.com/kb/971058

  You can also view the article mentioned for more information below:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Let us know the results.

• A customer request declaring Yammer to be installed on their Terminal Server, they are running Server 2008 R2 Std.

  Hi people,

  A customer asks that declaring Yammer be installed on their Terminal servers.

  They are running Server 2008 R2 Std.

  Is this possible, and if so what to do to get it properly installed.

  Thank you very much.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have a query.

  I suggest you re-post your query on the TechNet forums because we have experts working on this type of questions and for you help the better.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Does anyone know the phone for Customer Service? Im trying to install an app and will not let me

  Does anyone know the phone for Customer Service? Im trying to install an app and will not let me

  There is no support for this phone.

  you could get help if you could explain or you can try to contact support Adobe by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

• After changing the motherboard in my PC the device software windows 7 cann't be activated. I tried many times to speak with the service the customer but failed.

  After changing the motherboard in my PC the device software windows 7 cann't be activated. I tried many times to speak with customer service through automated phone system, but failed. Now what should I do.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :

  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  --------------------

  Windows 7 - version comparisons:

  http://Windows.Microsoft.com/en-us/Windows7/products/compare-editions

  MS Windows 7 store price:

  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

  --------------------------

• New device failed, HD Audio after installing updates to Win 8.1

  Hello.

  I have installed recent updates from Toshiba, exactly:

  * 06/02/14 display nVidia Windows 8.1-64 Bit 9.18.13.2660 World Wide disk *.
  * 06/02/14 display driver Intel Windows 8.1 - 64 Bit 10.18.10.3308 World Wide *.
  * 06/05/14 gas station Toshiba Windows 8.1 - 64 Bit 2.6.8 world wide *.
  * 06/02/14 Toshiba Audio Enhancement Toshiba Windows 8.1 - 64 Bit 2.0.15.4 world wide *.
  * 06/02/14-key Toshiba utility function Toshiba Windows 8.1 - 64 Bit 1.1.0001.03 world *.

  and one of them has forced the creation of a new audio device, fails with 'STATUS_DEVICE_POWER_FAILURE '.

  I tried to remove it (and uninstall related drivers to) the device, but it reappears if I do the new hardware detection.

  What is?
  The drivers are Microsoft, 6.3.9600.16384

  Thank you very much
  Marco

  Hi Marco

  As I can see from another thread, you Satellite L50-A-1CU. According to the specifications of the laptop this laptop was offered with pre-installed 64 bit ML WIN8.1.
  Preinstalled OS contains all the necessary drivers, tools and utilities, so I want to ask you if there is a problem with the feature.

  Please don't get me wrong, but I use laptop 4 years but always with the original substance of preinstalled and everything works perfectly so I don't see the reason to change anything if the machine works well and pre-installed OS is stable.

  One last thing. Do not use the Microsoft drivers. Some of them are offered as optional Windows updates. Don change anything. Use the original Toshiba drivers only.

• Windows updates fail to download and install the new

  Good afternoon

  I recently bought this satellite laptop computer pro on the package was both windows vista Home premium. I also decided to change fnsi at the same time. The provider also gives Norton Firewall Virus Intrusion etc etc.

  Microsoft does not validate my system but after that 2 hours on the phone with them and a system restore, they have agreed that I had bought some valid stuff and that fixed it.
  Now it seems windows updates icon appears ask me do I want to download and install.

  I do but every time, it fails, there are about 11 things that fail, no installation. I rang Microsoft today that they made one or tow things say but PC Toshiba's fault.

  Please, anyone had this happen to them and got the solution (s)?
  Please take into consideration that my knowledge of pc can be written on the back of a postage stamp. Do like me simple.

  Thank you

  Did you try to disable the firewall or uninstall Norton? Norton may block the Internet connection.

  If the provider uses a Proxy Server, you need to enter the proxy in Internet Explorer connection settings.

• Pavilion p40 fails to start after installing a gtx 760

  Hello

  I recently bought a new graphics card, the power and the case to my p40 pavilion in.

  Move the computer to the new case went very well, I installed a new PSU to power the 760 gtx.

  Also: nothing blew up, which is nice.

  But after the installation of the card and all wrap, start the computer fails. The message appears but freezes, the access to the contents of the bios while the card is installed with internal graph is impossible.

  My question is: Y at - it no way to update the BIOS that can solve this problem?

  Thanks in advance

  Thank you
  

  The problem you are having noted above and seems to be a problem with the new maps video PCI-e 3.0 and your motherboard. There was a discussion of the present in a thread at Overclock.comwith the link provided by @TheOldMan .

• HP Pavilion Notebook 15-p050ca: graphics driver error message started after the upgrade of Windows 10 model installed on #: G6U13UA #ABL

  I have recently upgraded to Windows 10 and since then, I received the following message through a game: "display Intel HD Graphics driver Driver for Windows 8 (R) stopped responding and has successfully recovered."

  I checked my graphics driver and it says that it is up-to-date.  I tried installing the latest drivers for my laptop model (according to the HP drivers page), December 15, 2015, installed without a problem, but no version has not fixed the problem.  An error message appears when I try to install the March and April, 2016 versions of graphics drivers, claiming that they are not compatible with my computer.

  I also tried the Intel and HP driver update utility and told me that my drivers are up to date.  However, when I look at the properties of my Intel(r) HD Graphics Family in Device Manager, I noticed that information on the events tab says: "peripheral PCI VEN_8086 & DEV_0A16 & SUBSYS_227E103C & REV_0B\3 & 11583659 & 1 & 10 still requires the installation."

  I don't know what needs update on my computer or if this driver is incompatible with Windows 10 and there is not yet an upgrade?  Advice or opinions would be appreciated!

  My computer model is the 15-p050ca HP Pavilion Notebook PC (ENERGY STAR) model #: G6U13UA #ABL and the graphics driver is version #: 10.18.15.4279

  I went back to 8.1 for Windows and ran the store several times and then reinstalled Windows 10.

  I watched the graphic version installed and version 20.19.15.4331 dated dated 18 November 2015, but he still claimed there was an update of the graphics driver.  I tried the update and it was version 10.18.15.4279 dated August 2015, which was the same version that was installed when I had problems (and the same version on the HP website), then I went back to the 20.19.15.4331 version.

  I tried all the graphics drivers listed for my computer on the HP support page and again, I had the same problems with them as I had before (either claim that my computer has no minimum requirements or my graphics driver crashing).

  With the current version (20.19.15.4331), my graphics driver has stopped at least for now crashing, but I assume that this is not a specific driver HP and is only based Intel?  If so, I recommend HP glance on the issue, I've had if they claim that these drivers are supposed to work for my computer when my computer is, in fact, not accept them.

• R050sa flow 11: Activation fails after a clean install on laptop pre-installed Windows 10

  I just bought a HP notebook 11 r050sa stream with Windows preinstalled Home 10, but could not start when it opened its doors to the top (circle kept spinning turn for hours).

  As I was intending to do a clean install anyway, to remove any HP bloatware, I decided to delete all partitions and perform a new installation from a USB key using the official Microsoft Media creation tool for Windows 10 Home https://www.microsoft.com/en-gb/software-download/windows10.

  Installation went well but the activation failed indicating that I have "do not have a digital right.

  How is this possible, since the PC came with Windows preinstalled 10? How can I get my license back?

  There was a surprising new twist in this question, should I report it here in case someone else is in the same situation.

  When I received the activation failed I reported to my original request, I had done the installation using the edition entitled 'Windows 10 unilingual homepage' (see figure below), which seemed to me the only option if I wanted to install "Windows 10 home" which is preinstalled on my laptop.

  Yesterday I did a last attempt at creating USB installation after selecting 'Windows 10' (see figure below). Yet once, I removed all partitions on disk and performed a completely clean install on my HP notebook 11 r050sa flow.

  The result is that, in the end installation smoothly, I found my computer with installed "Windows 10 Home" and fully active, without the need to insert an activation key of windows, with all the drivers installed automatically by Windows and without any HP bloatware!

  I'm puzzled by the outcome, but happy...

  

• Asynchronous custom device fails to stop

  While I was developing a custom asynchronous device, I came across a problem with the cancellation of the deployment of the .nivsproj I created to test the custom device.

  The custom device would send the error: -307730 Error Message: NI Veristand: one or more asynchronous custom devices did not close correctly and has been abandoned by the Veristand engine.

  I decided to do some troubleshooting for what could be wrong with the custom device by creating a separate custom device using the custom device model. I left completely intact model and it has deployed to our machine pharlap. When I canceled the intact custom asynchronous device it gave me the same error as above.

  I use Labview 2010 Professional version 10.0f2 development system, NI Veristand 2010 for a complete system of development and deployment of the .nivsproj on a licensed machine Pharlap.

  Sorry for the late reply.

  Zach-H by using simple device custom you provided I was able to create a custom asynchronous device that was able to stop. This allowed me to insert instructions printed in the two devices to help out what was causing the unit to raise an error when stopping.

  The culprit seems to be the NI VeriStand - Get loop Type.vi. The type of loop is never defined in the initialization.vi or the main.vi of the device model tool customized. So, when the RT pilot ran VI.vi the Type.vi loop get it would exit always false for the clock of the device to use and never use the correct name of the device clock. Without the name of the unit's clock he would never get a reason for reactivation.

  I forced the vi to use the clock of the device listed in the custom device model tool and I was able to shut down properly.

  TimothyA, you are right about the features of the measuring device. Even with the error of abnormal termination, the meter continues to operate normally after each deployment.

  Thanks for pointing out the problem with no channel being added to the measuring device. I'll make sure the custom device I develop handles the case where no channel, input or output, are added.

  Thanks for the help.

• UDP read too Long timeout, Async Custom Dev fail Shutdown

  Hello

  I've got a simple custom UDP for VeriStand receiver device that uses a timed loop. She has an infinite timeout so that I can listen on port constantly. I cancel the deployment every time I cause an error: 307730 Error Message: NI Veristand: one or more asynchronous custom devices did not close properly and has been abandoned by the Veristand engine.

  Does anyone know how to stop the function Read UDP when it expects a package? What's doing VeriStand when she replaces this behavior, for example he closes the network connection, as the unit cancels? The "Stop.vi" of the device model custom runs?

  Similar question for Visa Read with a long time (> 10 s). VeriStand closes the Visa Session? VeriStand just kill the timed loop and leave the rest of the finishing of custom device?

  Please note that if I shorten the timeout to 1 s or less the custom device can cancel the deployment without any problem.

  Thank you

  Brent

  Brent,

  You should have a way to interrupt your UDP activities to check the system status. Open UDP will create the buffer to the data to be received on this port. As long as reading occurs to clear the buffer before too much data overruns the buffer memory capacity, then you should be fine. Leaving a deadline of waiting-1 loop which blocks it is why VeriStand is having to stop the loop.

  You should have a case of time-out period for your operations of UDP/TCP for the periods of low activity in order to check a channel to shut down the device custom.

• MS automatically failed the updates to install, whenever I turn on the computer.

  For the seven days were impossible to install automatic updates at the start of my new computer (10 months) Windows 7. Having correctly installed until last week.

  You receive errors related to updates?

  1. Open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. In the left pane, click view update history.
  3. Find an update for Windows that has failed to install, and then double-click the update to view more information.
     Updates that have failed to install will display failed under status, next to the name of update.
  4. In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.

  Follow the links in the Windows Update dialog box under more information or help and Support to resolve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.