"iastor.sys page_fault_in_nonpaged_area" even in recovery image

On my brand-new U840, after installing all the thing I need, I thought it will be nice to use the SSD for Windows SWAP file. SYS (4 GB on a 8 GB partition)... and everything went well. Then I thought will be nice to use to use the rest of 24 (unpartitioned) Go for something else. In Ubunt (was unavaible in Windows!) I have formatted these 24 GB in ntfs and after startup I got a nice blue with screen
.....
iaStor.sys
PAGE_FAULT_IN_NONPAGED_AREA
....
I tried everything (delete the new partition... all partitions on ssd... by default in the BIOS... Turning off some Intel setting in BIOS)... * Windows does not start... even drive HARD recovery... even the recovery of USB *...

I'M STUCK! ... Any ideas?

Kind regards
Stefan

Stand by.
Did you install the recovery image using created recovery key USB and set the mobile o factory settings?

Tags: Toshiba

Similar Questions

  • Blue Screen iastor.sys, STOP; 0x0000008E (0xC0000005, 0x828490B8, 0xB96DA758, 0x00000000)

    iastor.sys - address 828490B 8 physical memory base to @8280B 000, Date Stamp 48054343 - Crash Dump, dump - the disk of 100 I can work only in Mode without failure, but I can't print or scan that I need to do. Someone can help me.

    Hello

    Looks like you need to update iastor.sys:

    iastor.sys = Intel Matrix Storage Manager driver - see System/card mother Maker and manufacturer of chipset.
    This driver could perhaps was pushed to the fault by other programs such as Symantec/Norton.

    This driver is extremely difficult to install if you need system or the manufacturer of the motherboard (for custom
    bed systems) help but you could also ask on their forums (if any).

    Also check the Intel downloads audit AFTER with the system/motherboard manufacturer...

    Intel downloads
    http://Downloadcenter.Intel.com/

    Intel Matrix Storage Manager - do not forget to check DATE and set for the version of Windows and chipset
    http://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&keyword=%22matrix+Storage+Manager%22

    More help on installing iastor.sys here (System Maker/card mother Maker first consult and use that as a last resort).

    http://social.technet.Microsoft.com/forums/en-us/itprovistadeployment/thread/98f123d4-9190-4169-A376-7a0caf0ffb2a/

    ============================================================

    More troubleshooting if necessary:

    Pick up the pieces after a computer crash
    http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
    for the office or in the Documents folder and download them from there.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    --------------------------------------------------------------------------------------------------------------

    Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
    Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
    other pilots to check there. Disable the installation of self as those who are older and if
    Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.

    See methods of update driver generic in the next message.

    BCCode: 8th 0x0000008E is the same as 0x1000008E

    Cause

    Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

    Common exception codes are:

    • 0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates that an unaligned data reference was encountered.

    • 0 x 80000003: STATUS_BREAKPOINT indicates that a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

    If you do not know the specific cause of the exception, consider the following:

    • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
    • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

    If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved.chk, which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

    You can solve the problems of BIOS by upgrading the version of the system BIOS

    BCCode: 8th 0x0000008E is the same as 0x1000008E<-- read="" this="">
    * 1151.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-mode-exception-not-HANDLED-0x0000008E-

    =============================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens. (If necessary)

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    It comes to my convenience store generic bluescreen:

    Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
    This would help. Such as ITC and 4 others entered at the bottom left. And another error
    information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do without if needed fail or the Vista DVD or recovery command prompt mode
    Options if your system was installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Blue screen * STOP: 0x0000008E (0xc0000005, 0x00000000, 0x8BB32B66, 0xB6F93F6C) * iaStor.sys - address 8BB32B66 base at 8BAF1000, Datestamp 4a7c1b38

    I have a Hewlett-Packard HP ProBook 4510 s 32-bit with Windows 7 Home Premium and a blue screen appears always * STOP: 0x0000008E (0xc0000005, 0x00000000, 0x8BB32B66, 0xB6F93F6C) * iaStor.sys - address 8BB32B66 base at 8BAF1000, Datestamp 4a7c1b38

    Hello

    Check with the help of HP, their online documentation and drivers, diagnostics and ask
    in their forums about known issues with this model.

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    =======================================================

    Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
    for the office or in the Documents folder and download them from there.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    ===============================================================

    BCCode: 8th 0x0000008E is the same as 0x1000008E

    Two main causes of these blue screen video drivers and BIOS - check with the system manufacturer
    Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
    other pilots to check there. Disable the installation of self as those who are older and if
    Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.

    See the methods of update driver generic and verify the implementation of driver verifier in the next
    Message.

    BCCode: 8th 0x0000008E is the same as 0x1000008E

    Cause

    Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

    Common exception codes are:

    • 0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates that an unaligned data reference was encountered.

    • 0 x 80000003: STATUS_BREAKPOINT indicates that a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

    Make sure you have enough disk space.

    • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

    If you do not know the specific cause of the exception, consider the following:

    • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
    • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

    If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved.chk, which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

    You can solve the problems of BIOS by upgrading the version of the system BIOS

    BCCode: 8th 0x0000008E is the same as 0x1000008E<-- read="" this="">
    * 1151.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-mode-exception-not-HANDLED-0x0000008E-

    =============================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free

    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers to 7
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    Stop Windows 7 to automatically install device drivers
    http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

    How to disable automatic driver Installation in Windows 7 / Vista
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

    Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
    Ultimate and Enterprise)
    http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Slate 21: recovery image?

    While I can find slate 7 system recovery images and instructions on HPs website, so far I could not find out where the corresponding information for the 21 slate. Turn on/off with the volume key reached a screen like the one in 7 slate instructions and thus provides an option to restore things to the SD card if I have a failure - but who needs the image file! In this section "drivers and software" HP web site admits not even slate 21 the existing... I guess it's just that this has not caught up, but I really want to feel safe sooner rather than later, please...

    Arthur

    Arthur

    At this point, HP does not provide system images of recovery for the Slatebook or slate 21 (both are Android 4.2). If this changes, I will be happy to post here and let you know. Sorry I don't have better news to share.

    Jendyruth

  • A few questions about Toshiba recovery image

    Hello
    I'M ALPER. I HAVE A PROBLEM EVEN WITH OTHER FRIENDS. THE PROBLEM IS THAT I INSTALLED WINDOWS 7 PRO TO MY COMPUTER, I COULD NOT GO BACK TO THE ORIGINAL OS.

    I HAVE HDDRECOVERY IN MY HARD DRIVE. BUT I HAVE NO RECOVERY DISK.

    I TRY THE METHOD BY FOLLOWING THE LINK. IT DOES NOT WORK. WINDOWS DIRECTLY WHEN THE COMPUTER STARTS. NO RECOVERY.
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=68031

    NOW, I'LL TRY IT THE HARD WAY. IF I WANT SUCCESS I'LL YOU SAY.
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=40790

    BEFORE DOING THAT I HAVE A QUESTION IF I CREATE TOSHIBA RESTORE DISK WITH THE SAME MODEL MY FRIENDS? IS IT WORKING OR NOT?

    ANOTHER QUESTION: IS THERE ANOTHER WAY?

    Thank you

    > I HAVE A SAME PROBLEM WITH OTHER FRIENDS
    That s best evidence of something interesting that we write here: person read document s user manuals.

    In this section of the forum you will find many discussions with very good explanation of how it works. In any case, here is brief summary:

    Each laptop model comes with preinstalled OS (factory settings). HARD drive (from the HARD drive partition) recovery facility can be launched and work if the laptop to factory settings. Otherwise you will have access to files from recovery, and there is also no possibility to start the installation of HARD drive recovery.
    > BEFORE I HAVE A QUESTION IF I CREATE TOSHIBA RESTORE DISK WITH THE SAME MODEL OF MY FRIENDS?
    In general Yes, but this other model must have the same part number. Send your model name and we can tell you this part number.

    In any case, in my opinion the best solution for you is order the original Toshiba Recovery disk and use it for recovery image installation.

  • Satellite L500 - 1XM Windows 7 iaStor.sys blue screen

    Hi I have a Satellite L500-1XM that keeps bluescreening with error iaStor.sys. It happens randomly between 10 minutes and a few seconds after the start (even in safe mode).

    I tried a memory test and that turned out fine. I checked the logs and they do not indicate hard disk failure or chkdsk reports any corruption or bad sectors.
    This could be the cause?

    Hi Mike

    Thanks for the comments.
    Glad to hear all is well.

  • Satellite L650 - blue screen - driver_irql_not_less_or_equal iastor.sys

    Toshiba Satellite L650, Windows 7, Intel Core i3 processor.
    My computer suddenly restarted and I get a blue screen with a message - 'iastor.sys' does not.

    Anyone encountered before?
    How can it be resolved?

    -Earlence

    iastor.sys seems belongs to the SATA/controller HARD disk controller.
    Eventually he deliver s HARD drive.
    However, you can try to reinstall the Storage Manager Intel because this package contains this file.

    If this is not enough, try to restore the system using the recovery disc or HARD drive recovery...
    Take a look in the manual mode for more details...

  • HP ENVY laptop: recovery Image (D)

    I upgraded my laptop computer to the original Windows 8 Windows - 8.1Pro and then the windows - 10.1Pro.

    Drive recovery Image (D) recognizes these updates? or is he still in charge of recovering the laptop for Windows-8?

    In other words: if I had to use the recovery Image (D) at the moment it would Windows 8? or Windows - 10.1Pro?

    Unfortunately for upgrades, the recovery Partition always contains the version of Windows that the PC had its release.  If Windows 8 was on the laptop when it was purchased and delivered then that is what Recovery Manager will reinstall if the user was to call the process.

    Probably not what was intended but it would be to the advantage of the user to make an image of an independent system on an external IE: external hard drive. I prefer Acronis True Image, but many are available.  Even free with IE: Clonzilla

  • Need help with the blue screen issue "NAVEXI5. SYS, PAGE_FAULT_IN_NONPAGED_AREA ".

    Original title: need help with the blue screen issue
    My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.

    Hello

    1. Since when are you facing this problem?
    2. you remember to make changes to the system?
    3. do you get an error with this error code?

    I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.

    Method 1.
    I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
    a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
    Description of the Windows XP Recovery Console for advanced users
    http://support.Microsoft.com/kb/314058
    b. perform a disk check.
    How to perform disk error checking in Windows XP
    http://support.Microsoft.com/kb/315265

    Method 2.
    I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
    How do I recover from a corrupted registry that prevents Windows XP startup
    http://support.Microsoft.com/kb/307545

    I hope this helps.

  • Help! I can't download recovery image to my PC from dell website system drivers

    I am trying to download recovery image from my PC operating system from the site of uk drivers dell under the product I own (inspiron aio 7459)

    Whenever I try to download the image, it will fail in the middle and the entire image file is corrupt, it always happens when I try to download the image and I seriously need this image. My PC has now gone unstable, I had to do a clean install of windows 10 but after a few months he gets corrupted with a lot of disk errors, this pc worked perfectly without error before that dell was told to remove the recovery partition, support technique dell ruined my computer.

    Can someone help me please? How can I stop it failing in the middle of the download?

    I feel like this system recovery is my only hope to get my PC to its State as if it was when I got this PC.

    (If it is not sorted then I am more satisfied with my PC and will just return it and get a refund, because even the technical support help not out me and rather corruption telling me I have to pay for the mistake, they did what I never do!)

    It's ok now, what I've done, is download the image of the system at midnight because fewer people using the internet and therefore less traffic to interrupt the download.

    I downloaded it at midnight and he succeeded, so for those struggling to download an image system for their PC, I'd download it somewhere near the off-peak hours.

  • Iastor.sys and Bsod CPD watchdog

    Hi I have an ASUS g series, and I get Iastor.sys bsod when I connect and if it doesn't I receive watchdog dpc randomly

    JAS

    These related iaStorA.sys Intel Matrix Storage Manager driver from Intel Corp.  I'd install the most recent driver available, even if it is the same date that drivers become corrupt.  If you have a SSD or hybrid, I would also like to update the firmware.

    If you continue to plant I remove McAfee and use the built in Defender in his place.

    Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
    Copyright (c) Microsoft Corporation. All rights reserved.

    Loading dump file [C:\Users\Ken\Desktop\061614-139437-01.dmp]
    The mini kernel dump file: only registers and the trace of the stack are available

    Symbol of validation of the path summary *.
    Location of response time (ms)
    C:\Users\Ken\Desktop OK

    Symbol of validation of the path summary *.
    Location of response time (ms)
    Deferred SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
    Symbol search path is: SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
    Executable search path is: C:\Users\Ken\Desktop
    Windows 8 Kernel Version 9200 MP (8 procs) free x 64
    Product: WinNt, suite: TerminalServer personal TerminalServer
    By: 9200.16424.amd64fre.win8_gdr.120926 - 1855
    Computer name:
    Core = 0xfffff802 '21c6e000 PsLoadedModuleList = 0xfffff802' 21f38a60
    The debugging session: 10:56:47.776 Mon June 16, 2014 (UTC - 04:00)
    System Uptime: 0 days 0:01:26.465
    Loading the kernel symbols
    ...............................................................
    .......................
    Loading user symbols
    Loading unloaded module list
    ......
    *******************************************************************************
    *                                                                             *
    * Bugcheck analysis *.
    *                                                                             *
    *******************************************************************************

    Use! analyze - v to obtain detailed debugging information.

    BugCheck D1, {44, 2, 0, fffff8800167920e}

    WARNING: Unable to verify timestamp for iaStorA.sys
    ERROR: Module load completed but symbols can be loaded for iaStorA.sys
    Probably caused by: iaStorA.sys (iaStorA + 1a20e)

    Follow-up: MachineOwner
    ---------

    0: kd >! analyze - v
    *******************************************************************************
    *                                                                             *
    * Bugcheck analysis *.
    *                                                                             *
    *******************************************************************************

    DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
    An attempt was made to access an address pageable (or completely invalid) to a
    application interrupt level (IRQL) that is too high.  It is usually
    caused by drivers using a wrong address.
    If the kernel debugger is available, get a stack backtrace.
    Arguments:
    Arg1: 0000000000000044, memory referenced
    Arg2: 0000000000000002, IRQL
    Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
    Arg4: fffff8800167920e, address memory

    Debugging information:
    ------------------

    READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80221fc4168
    GetUlongFromAddress: cannot read fffff80221fc41f8
    0000000000000044 non paged pool

    CURRENT_IRQL: 2

    FAULTING_IP:
    iaStorA + 1a20e
    fffff880'0167920e 807b44b0 cmp byte ptr [rbx + 44 h], 0B0h

    CUSTOMER_CRASH_COUNT: 1

    DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

    BUGCHECK_STR: AV

    Nom_processus: System

    ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre

    DPC_STACK_BASE: FFFFF80221011FB0

    TRAP_FRAME: fffff80221011870-(.trap 0xfffff80221011870)
    NOTE: The frame trap does contain not all registers.
    Some registry values can be set to zero or incorrect.
    Rax = fffff880016f1070 rbx = 0000000000000000 rcx = fffffa8010813a10
    RDX = fffffa8010813a28 rsi = 0000000000000000 rdi = 0000000000000000
    RIP = fffff8800167920e rsp = fffff80221011a00 rbp = 0000000000000000
    R8 = fffffa8010813ab8 r9 = 0000000000000021 = 0000000000000000 r10
    R11 = 0000000000000002 r12 = 0000000000000000 r13 = 0000000000000000
    R14 = 0000000000000000 r15 = 0000000000000000
    iopl = 0 nv up ei pl zr po nc
    iaStorA + 0x1a20e:
    fffff880'0167920e 807b44b0 cmp byte ptr [rbx + 44 h], 0B0h, ds:00000000'00000044 =?
    Reset the default scope

    LAST_CONTROL_TRANSFER: from fffff80221ce8069 to fffff80221ce8d40

    STACK_TEXT:
    fffff802 ' 21011728 fffff802' 21ce8069: 00000000' 0000000 a 00000000'00000044 00000000'00000002 00000000'00000000: nt! KeBugCheckEx
    fffff802 ' 21011730 fffff802' 21ce68e0: 00000000'00000000 00000000'00000000 fffff802 ' 21011900 fffff802' 21011870: nt! KiBugCheckDispatch + 0 x 69
    fffff802 ' 21011870 fffff880' 0167920e: fffffa80'10813 has 10 fffffa80 '0eca0020 fffffa80' 0ec9dbd0 00000000'00000002: nt! KiPageFault + 0 x 260
    '21011-00 fffffa80' fffff802 a 10813, 10: fffffa80'0eca0020 fffffa80 '0ec9dbd0 00000000'00000002 fffffa80' a 10813, 10: iaStorA + 0x1a20e
    fffff802 '21011-08 fffffa80' 0eca0020: fffffa80 '0ec9dbd0 00000000'00000002 fffffa80' 10813a 10 fffff880'0166588f: 0xfffffa80'10813 has 10
    ' fffff802 '21011-10 fffffa80' 0ec9dbd0: 00000000 ' fffffa80 00000002 '10813 has 10 fffff880' 0166588f fffffa80 ' 0df47f00: 0xfffffa80'0eca0020
    fffff802 '21011 a 18 00000000' 00000002: fffffa80'10813 has 10 fffff880 '0166588f fffffa80' 0df47f00 00000000' 00000000: 0xfffffa80'0ec9dbd0
    fffff802 '21011-20 fffffa80' 10813a 10: fffff880'0166588f fffffa80 '0df47f00 00000000 00000000' fffffa80' 0df47f21: 0x2
    fffff802 '21011-28 fffff880' 0166588f: fffffa80'0df47f00 00000000 00000000' fffffa80 '0df47f21 fffffa80' a 10813, 10: 0xfffffa80'10813 has 10
    fffff802 '21011-30 fffffa80' 0df47f00: 00000000 00000000' fffffa80 '0df47f21 fffffa80' 10813a 10 00000000 00000000': iaStorA + 0x688f
    fffff802'21011 has 38 00000000 00000000': fffffa80'0df47f21 fffffa80 '10813a 10 00000000 00000000' fffffa80' 0ec9d798: 0xfffffa80'0df47f00

    STACK_COMMAND: kb

    FOLLOWUP_IP:
    iaStorA + 1a20e
    fffff880'0167920e 807b44b0 cmp byte ptr [rbx + 44 h], 0B0h

    SYMBOL_STACK_INDEX: 3

    SYMBOL_NAME: iaStorA + 1a20e

    FOLLOWUP_NAME: MachineOwner

    MODULE_NAME: iaStorA

    Nom_image: iaStorA.sys

    DEBUG_FLR_IMAGE_TIMESTAMP: 5175919d

    FAILURE_BUCKET_ID: AV_iaStorA + 1a20e

    BUCKET_ID: AV_iaStorA + 1a20e

    ANALYSIS_SOURCE: KM

    FAILURE_ID_HASH_STRING: km:av_iastora + 1a20e

    FAILURE_ID_HASH: {23e6ee3b-e85f-41b3-c240-f78c010c906c}

    Follow-up: MachineOwner
    ---------

  • Sony Vaio SVT14113CNS error DRIVER_IRQL_NOT_LESS_OR_EQUAL (iaStorA.sys) [Intel Rapid Storage Technology] on Windows 8 x 64

    March 30, im getting this error on windows start.

    When I start my notebook ' VAIO' logo comes with "Preparation auto repair. After 2-4 seconds 'circular loop treatment' pause for 1 sec & 'Blue screen' comes with

    "Restart your PC on a problem and needs. We are only collecting the error information, and then we'll restart for you"

    error "DRIVER_IRQL_NOT_LESS_OR_EQUAL (iaStorA.sys).

    I know its technology Intel Rapid Storage Technology.

    I had my backup of the C: & D: via Ubuntu live disk installed on USB key on a Portable HARD drive.

    now, I just need to get into recovery mode.

    When I press on "Assist-> recovery & hold ' and then it goes blue screen.

    (1) im thinking to 'Safe Mode' start up. because if it will allow the startup I can uninstall the drivers of Intel rapid storage Tech.

    Please tell how I can do it, because I can browse the live Windows by Ubuntu Pendrive files.

    (2) 2nd is I can also navigate my "recovery Partition", so could you tell me how to use this 'partition data' to something to copy paste for USB...

    My Recovery Partition to a folder 'sources' & also sources---> install.wim (9.05 GB)

    folder 'sources' is total 17.9 GB in size.

    If you (microsoft) can help me with the idea of 1st activation mode without fail to start, then it would be very very useful. Please, I beg you.

    just need to as the bypass to my window troubleshooting-made & then I can start my recovery.

    thnx.

    Hi Christophe,

    As the report makes clear that the Intel rapid driver is the root cause of the
    question, we can try to run restore the system to an earlier point to cancel the update of starting on the recovery Partition.

    You can see the Sony guide learn more about the problems of system recovery:

    http://community.Sony.com/T5/Windows-8/Windows-8-upgrade-Troubleshooting-FAQ/TD-p/41893

    http://Genesis.Sony-Europe.com/InStranet/ccil_sony/selfservice/searcher.jsp?docid=125104&l=en_GB&m=null

    To go in safe mode since the Partition configured recovery on your computer, you can
    Follow the instructions below.

    Once you are on the recovery Partition, you will be asked to press any key to load sound
    content, to do. First, you will need to select your keyboard type. Press the page layout you want to use. If you want to browse the available options, press 'see more keyboard
    layouts'
    until you find the one you want to use.

    Windows asks you to choose an option. Press help.

    In solving problems screen, tap Advanced.

    In the Advanced options screen, tap Start parameters.

    You are informed that you are about to restart to change several options of Windows, including activation of the Secure Mode. Press restart.

    Your computer or your device restarts again and displays nine startup settings, including Safe Mode, Safe Mode with network and Safe Mode with command prompt

    Press F4 on your keyboard, to turn on Safe Mode, F5 to activate Safe Mode with network and F6 activate Safe Mode with command prompt. Windows 8 and Windows boot 8.1 now depending on the setting you have selected.

    It will be useful. Please let us know in case you need more information on issues related to Windows.

  • Satellite L655-1GN - failed to install the new drive HARD original recovery image

    Hello

    Just had to buy a new hard drive and put the latter with the former. I already checked that he was the same size and SATA as the original hard drive. When I tried to start a new installation of the operating system from the recovery disk (that I bought the Toshiba provider in my country - MAFIL), the boot option was not available.

    MAFIL representative told me that the recovery disks only for the reinstalliation of the OS on the original drive, but are not suitable to install a fresh copy again. So, how can I install my Win7 64-bit, with all settings on the new drive and Toshiba apps?

    Thank you
    Tomer

    On many models of laptops different change HARD drive or upgrade can be done by the owner of the laptop and after doing this, you can install recovery image using the disc of recovery without any problem.

    I did several times on different models of Toshiba laptops. This works.
    I really don't understand how someone can give you this information.

    By default the BIOS settings, restart your machine and press F12 at startup. When the boot menu appears on the screen put the recovery disk ODD news, select CD/DVD as a boot device and press ENTER.
    What happens when you do this?

  • Installation of recovery image on Satellite L500D

    Am trying to re - install windows 7 on Satellite L500D. I'm having all kinds of problems with the computer because it has been infected by malware or viruses, don't know that. I have already backed up all my documents, photos and files pst on an external hard drive.

    I press '0' when the power and then got the following options.

    First option is 32 or 64 bits,
    I chose 32 that the vehicle has currently 32-bit installed.
    Warns next option, I selected Yes.
    Next option is factory default software recovery (Recover State out-of-the-box). or erase the hard drive, I chose the default settings restoring.
    Then there's 3 options,
    1 recovery of out-of-the-box-state (System Recovery Options include).
    2. recovery without changing hard drive partitions, or
    3. recover to custom size partition. I thought I chose Option 1, but it shows all partitions will be deleted and you will lose all data on the hard drive.

    This means that I will delete the windows installs partition?
    Choose option 2?
    Option 2 says "the first partition is deleted and you will lose all data on the partition. I am thinking 2 option?

    On a separate issue, I could install the 64 bit version of Windows, if so it would be an advantage?

    Hello

    Detailed explanations on the recovery image installation, you can find on http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

    Please check it and I hope you find al the info you need there. I always use Recovery option out-of-box state > system recovery options are included.

    Your system is infected of course and you have to complete resettlement in order to not make this so complicated. Back up all your data and install recovery image using option 1. No matter what will be removed and what not. Drive HARD integer should be cleaned.

    I recommend you to use the version of 64-bit operating system.
    Very nice article about 32 and 64 bit versions OS, you can find here.

  • error 'iaStorA.sys' on the Satellite U940-108

    Hello

    I have a portable Satellite U940-108. I had to replace the hard drive failure.
    After retrieving the backup of the following Win 8.1, start the laptop the error message system: System Thread Exception unhandled (iaStorA.sys).

    This error also occurs if Win 8.1 is installed with an installation CD, and then the drivers are loaded.
    I have updated the drivers to the latest version.

    I beg your help.
    A welcome message.
    Jordi Miralles.

    After the HARD disk has been removed and replaced the RAID configuration is lost and must be rebuilt.
    I don t know exactly the procedure, but in order to use the RAID feature that is controlled by the Intel Rapid Storage Technology, the RAID must be to rebuild and this can be done by the service provider accredited with special tools and method.

    After that, I guess that this error will go away.

Maybe you are looking for