iBooks using iCloud synchronization does not work.

Similar Questions

• My Icloud account does not work. As soon as I try to connect my PC know "this browser is not supported. What went wrong and what can do?

  My Icloud account does not work. As soon as I try to connect my PC know "this browser is not supported. What went wrong and what can do? I previously used the same connection to my account for a long time without any problem. My PC I have a tie with Windows 8

  < personal information deleted by host >

  Hi bengtfrombelgentier,

  Welcome to the communities of Apple Support! I'm sorry to hear that you are experiencing these problems access iCloud. If you are unable to access iCloud.com due to an error of supported browser, you can check the browser requirements set out in the following article:

  Requirements for iCloud - Apple Support

  Concerning

• Is it possible to return to the synchronization of the former in Firefox, as new synchronization does not work.

  As new synchronization does not work for me, despite the setting it in total compliance with the Mozilla Web site and no one took the trouble to answer the previous post today, is it possible to return to the synchronization of the former?

  To the best of my knowledge, the synchronization of the former is no longer available.

  If you post some details on the problems you are having with the sync, we can try to solve your problem.

• Serial cable using IrDA protocol does not work correctly. Steve Stephens, * address email is removed from the privacy *.

  The difficulty it Center Microsoft said that my serial cable using IrDA protocol does not work properly.

  Appreciate any suggestions on how to solve this problem.

  Steve Stephens, * address email is removed from the privacy *.

  Hi, Steve Stephens.

  Did you run the fixit available in the link below?
  Hardware devices do not work or are not detected in Windows

  Method 1: Check for any error message in Device Manager

  When a device is not functioning, Device Manager also typically displays an error message with an error code that comes with it. First, search for errors in the Manager of devices to do this, follow the steps below:

  (a) open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

  (b) If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) in the Device Manager, find your device, and then double-click the device name.

  (d) If an error code has been generated, the code appears in the status area of the device under the general tab

  
  Method 2: download and install all available Windows Update

  Install Windows updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  Method 3: Download and install SP2

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

• OID / AD synchronization does not work

  I am new to Oracle Fusion Middleware. I am facing a problem where synchronization between OID/AD does not work. I'm learning this process on my own. Can you please guide me on how to solve this problem. If you can direct me to a documentation of troubleshooting would be great as well. Thank you!
  
  Oracle Enterprise Manager 11g > Fusion Middleware control
  Farm Farm_IDMDomain
  
  Status of deployments and Fusion Middleware is 100%
  
  Identities and access > DIP (11.1.1.2.0)
  
  SOAK the component status
  Quartz Scheduler until
  MBeans Up
  
  Under execution summary > synchronization profiles
  
  Profile Name successful changes didn't change error
  
  Site_Import 0 0 error ModRDN run in directory
  Error Corporate_Import 0 2000 entry in the directory

  user6655099,

  I don't know if OIDDAS exists or he works at OID11g. I used only 11g OID and have never used OIDDAS (so far). To access the data, I use ODSSM and the only authorized connection at the moment of this component is "cn = orcladmin. This is a limitation of product as directed by oracle 11 g OID at the moment.

  You can test your identification of the oid information using a simple ldapbind. Also, sign up for one of the databases with the OID and create an account of EUS database to test also.

  Although you have progressed to this stage. You're still meets tons other issues :-). But, it's the pleasure of working with these products.

  Kind regards

  Shaji.

• UCM, RIDC sorting using custom metadata does not work

  I'm doing a search using GET_SEARCH_RESULTS and I am trying to sort the results, but unfortunately it does not work. I get this exception:

  Unable to retrieve search results. Error occurred while retrying the search query. Error occurred while processing. Unable to return results.
oracle.stellent.ridc.protocol.ServiceException: Unable to retrieve search results. Error occurred while retrying the search query. Error occurred while processing. Unable to return results.

  at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:142)

  at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:108)

  to the sample. Connection.main (Connection.Java:661)

  The binder is like:

  binder.putLocal ("IdcService", "GET_SEARCH_RESULTS");

  binder.putLocal ('ResultCount', '10');

  binder.putLocal ("QueryText', 'xDocAudvTitle < contains >"togados"');

  binder.putLocal ('SortField', 'xDocAudvTitle');

  binder.putLocal ("SortOrder", "Asc");

  
  

  If I do not use the sortField and SortOrder parameter, the query retrieves the correct results.

  
  

  Any idea on this exception?

  
  

  Kind regards

  Juan Carlos.
  

  Thank you all,.

  The problem is that the custom metadata field is of type Memo, both because of its size is not optimizable, so I can't sort by using xDocAudvTitle.

  I'm done with the help of another field to sort.

  Once again, thank you to you two.

  Kind regards

  Juan Carlos.

• After having used dvd audio does not work for anything else until I restart

  After that I watched a dvd that my sound does not work for my internet browser (chrome) does work stil for hp dvd drive, drive windows media and regular windows functions (as when I put the sound level, it gives the "ring" test to show me the volume

  thakns

  Thank you irfan. I tried exploring and there worked aand it occurred to me that it was just because my browser is open to before it didn't work - so I tried closing and reopening chrome and it worked, maybe! the Explorer has worked even without reopening. Thanks again

• iCloud/continuity does not work with my Mac or iPhone now

  I was really holding this problem for a very long time now because it's really a "first world problem", but in the past year continuity and iCloud were either non-existent or not working properly on my iPhone 5 s (32 GB) and mid-2014 13 "(2,6 GHz/8 Go/128 SSD) retina MacBook Pro (and now it just feels like I use old devices when I'm not."

  They work on the latest versions of iOS and Mac OS El Capitan, are on the same WiFi network at home or at school, have all two Bluetooth-enabled, and are both signed in my Apple ID iCloud

  Last year when I had the time, I reset the settings, wiped and restored the iPhone, etc, to try to get continuity works again. Nothing seems to work, and so that the whole process has been somewhat of a breeze on the release of these two operating systems, for some reason any he didn't work on my devices. I'm really ideas at this stage on how I can get the work continuity (the alternative at this moment is iCloud tabs in Safari).

  With iCloud, the issues are not as complex, but the photo stream is not working properly. If I take pictures on my iPhone that do they not appear in a few hours on my Mac, and if I add a bunch of pictures in pictures on the Mac, appear at all on the iPhone. I have all iCloud settings enabled for Photos and it's still buggy.

  I use Apple products since kindergarten and I consider myself to be a loyal customer. It would be a shame if I can't find a way to solve what should be a simple problem.

  Thank you for your help in advance.

  I guess you have tried to sign your iCloud (on all devices) account, signing in?  If you tried and it did not work, and this problem is ongoing for you for a year, my next suggestion would be to call Apple Support (link at the bottom of the page) or make an appointment with an employee at the Genius Bar in an Apple store.

• What happens if the iCloud taps does not work on iMac?

  What should I do if the iCloud taps don't work on iMac? My iMac does not show the browsers of my MBP, iPhone or iPad (and vice versa). I tried to unplug the iMac and notation on my account iCloud again. Thank you.

  You provide the version OS X iMac is running.

  GB

• My Windows Media Player does not open upward when you click it in the list of available programs, nor will any media over the internet using Windows Media does not work

  My Windows Media does not open upward, when you click on Window Media Player in the list of available programs nor play any internet media using the Media window. I have the 110.6002.18311 version. Any help to fix this problem will be appreciated.

  Hello

  You can try to re register the dll files for windows media player and if it helps fix your problem. To do this, please follow the steps below:
  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
  2. At the command prompt, type the following commands and press ENTER after each command:
  regsvr32 vbscript.dll
  regsvr32 jscript.dll
  regsvr32 wmp.dll

• Model of resizing by using shift + alt does not work

  Hi all

  I have training in CS6 Adobe® Illustrator® class in a book and in Chapter 6, it is a sectoion on creating templates.

  I use Illustrator CS6 on Windows 7 64 bit.

  The instructions are:

  Select the Selection tool and, by pressing the keys Shift + Alt (Windows) or the keys shift + Option (Mac OS), do drag the high limit point of the rectangle selected downwards until the width and height are about 30 pt.

  However, no matter what I try I can't achieve this goal.

  When I press SHIFT + alt and head upward point limit, the icon changes to an arrow plus a beautiful place but everything what is the entire model. It does not resize as ssays example.

  Anyone have any ideas why?

  Kind regards

  Martin Kozma

  You have the visible bounding box? Display > display the bounding box.

• Form TEST using TEMPLATE.fmb does not work

  Hi Hussein/Helios,
  
  I created an example using the TEMPLATE.fmb test form. I just created a single block of data using 2 columns
  on a table. Then I compile it. Then I click Run, but the form just run and any form of window appeared :(
  It seems out unconditionally.
  
  
  Help, please
  
  Thank you very much
  
  Mrs. k

  Hi yxes2009,

  You try to execute the form directly from the form's constructor? That usually will not work. The way of the development of Oracle Applications (E-Business Suite) forms is:

  1 copy and rename the TEMPLATE.fmb and use this copy as a starting point for your form.
  2. develop the form with Forms Builder (Windows), compile it, and check that there are no errors (do not run).
  3. transfer the form to the server Oracle Apps (linux) and compile the form.
  4. move the compiled form (xxx.fmx) to the appropriate location (Nom_liste)
  5. connect to Oracle Applications, run the form a from there and test it.

  To develop the form (step 2), you must follow the standards as stated in the Guide to the application developer. Also, to correctly compile the form to the server, you must have the source (forms, libraries) directories in the path of forms. And of course, before step 5, you must perform some configuration in the application (form-function, menu creation, responsibility, assign the user).

  I hope this helps.

  Kind regards.

• my e-mail confirmation of synchronization does not work

  for the first time when I tried to configure my sync on my nexus7 device option

  my confirmation on gmail mail did not work.

  When I click on the werify button this message (below) appears
  Damaged verification link

  The link you clicked on was missing character and may be infringed by your e-mail client. Copy the address carefully and try again.

  Confirmation email contains link but just the button.

  When I click on browser redirection message appeared for a short time and if I not wrong there was a short link.

  But after two days, it worked and I was able to sync.

  Thanks for your attention...

• Satellite L300D-202: restore using recovery disk does not work

  Good afternoon

  Wonder if anyone can shed some light on this error message I get when trying to restore my laptop...

  «Setting permissions V:\HDDRecovery...»
  V:\HDDRecovery the system cannot find the specified file
  Unpack the WinRE...

  L ' ImageX for Windows tool
  Copyright bla...

  Opening the file in error [V:\HDDRecovery\SWImg\06546XSP.svml
  ERROR: ImageX could not apply WinRE V:\HDDRecovery\SWImg\06546XSP.svm index 1 of the HARD drive to W:!

  Press any key to continue... »

  After that, I find myself with the Toshiba Recovery with no action software and a screen BACK Active but nothing happens...

  I'm guessing that lack of HD, received today from Toshiba for this system recovery media

  Laptop is:
  Satellite L300D 202

  NB. If I restart the laptop start date and shows BOOTMGR is missing Ctrl Alt Del to restart...

  Any help appreciated,
  Thanks in advance,

  Rick0684

  > NB. If I restart the laptop start date and shows BOOTMGR is missing Ctrl Alt Del to restart...

  Hmm... for me, it seems that the laptop does not start from the disc (DVD), but it attempts to boot from the HARD drive...

  In any case, have you tried to boot from another disk; for example, Win XP, Linux Live CD?
  To do this, and check if it is possible... If Yes, format the HARD drive and try to boot from the recovery again disc!

  PS: Have you tried a HARD drive recovery option?
  Turn on the unit, press F8 and choose fix my computer
  After that, select Toshiba HDD recovery option if possible.

• synchronization does not work on ipod classic

  Hello

  I have an Ipod Classic, but the last time I tried to recharge the battery with a usb cable, a message informed me that a restore is necessary. I restored the ipod and suddenly I couldn't sync the ipod with itunes Gallery more. Exactly, when I try to sync the Gallery, I can push the button but the itunes message is "synchronization is complete", but no track goes to the ipod. What is going on? The iTunes version is 12.0.1.26 and the OS X version is 10.9.5. What can I do to really perform the synchronization?

  Thank you very much.

  Marco

  If you do a restore, current iTunes sets the iPod to use the parameter manually manage music and videos , by default.  If you want to use automatic synchronization, select the iPod in iTunes (click on its button on the device on the horizontal bar) to show its settings screen in the iTunes window.  The side left (in the sidebar), under settings, click music.  Right, parameters of music on the iPod screen.

  Check the box to Sync music.  This enables automatic synchronization.  Below, if your library complete iTunes music fits on the iPod, choose the option to synchronize the entire music library.  Click apply.