ICC profiles and the A20

Similar Questions

• U2413, Confused about ICC profiles and sRGB/ARGB modes

  Hello

  I have a question for the calibrated modes (sRGB/ARGB) of U2413.
  -I guess that there's no ICC profiles are delivered with the driver for these because they are focused on the LUT calibrations?
  -However, when the driver is installed, it installs the native ICC profile. This profile still apply in the calibrated LUT modes? I guess it shouldn't because it is for native mode only, but is it? Or I'll remove it?

  Thank you.

  The sRGB and AdobeRGB modes use hardware for calibration LUT in the monitor. If you use these modes you must set at least the standard sRGB or AdobeRGB ICC profiles in your operating system to correctly define color space, in which you are working.

  You could actually make calibrations of LUT of additional software stored in a custom ICC profile, and they would act on top of equipment calibration LUT in the monitor.

  The 'DELL U2413, D6500 color profile' native ICC profile defines the color space of the monitor, which is actually a bit larger than AdobeRGB in certain colors. Do not use it if you set the monitor the sRGB or AdobeRGB modes. According to me, the native ICC profile corresponds to the color space used in preset 'Standard' of the monitor, but there is not LUT stored in the ICC profile to calibrate the colors accurately.

• Why is it not my icc profile in the 'other' tab in the color management tab in the print module?

  I installed a new icc profile (as I did in the past). It appears in the folder c:/windows/system32/spool/drivers/color as well as everything else. I have the latest update for Lightroom installed. I closed Lightroom, restarted the computer and restarted Lightroom. My other profiles are listed, but this one isn't there. I know it must be added in the menu 'Other' down in the profile section of the tab in the print module color management--but it is just not there. Any advice would be appreciated.

  I just figured it out, and I'll put the answer here in case others run into the same issue.

  I closed the print module and went in the develop module. I went soft proofing (shortcut "S") mode and looked on this list of management-profile-other colors, and it was there. I then closed out proofing and returned to the print module. Now the icc profile was listed. Strange behavior, but there you go.

• How to repair files with broken JPEG ICC profiles (and perhaps other questions)

  I have a set of valuable digital images, they are actually fairly low resolution scans of the prints, but they are invaluable and cannot be re-analysis.

  The images show the following questions and I don't know how to fix:

  (1) in the dialog box import LR, they appear as "Preview not available for this file.

  (2) when I try to import into LR, I get the error "the following files were not imported because they could not be read.

  (3) if I open the file in Photoshop CS5, I get the warning "the embedded ICC profile cannot be used because the embedded ICC profile is not valid. Ignoring the profile' - if I ignore it, PS can open the file but of course, the color profile is missing and the images seem to universally terrible.

  Curiously, however, the images provide an overview in Windows Explorer and if I open them with the infinitely lower Windows Live Photo Gallery, they correctly opens and the colors are properly.

  Which leads me to believe that there is something wrong with these files that Windows is OK with but Adobe is not. Because I don't have the paper prints, cannot perform a new analysis and do not know the workflow of the process not applied, I have absolutely no idea if this happened in time scanning or subsequently.

  HOWEVER, at this time, it surely must be a tool that allows me to package the information Windows can read and put it back in the file where it should be so that Adobe can read the same thing?

  No idea how?

  Thank you in advance,

  Alastair

  Alastair,

  The application of windows Viewer ignores all profiles and treats all files as if they were sRGB.

  Probably you have your Photoshop preferences defaults to a space of a different color than that, so the colors look bad. Try to make default PS in sRGB and open one of these images. If it looks good, you can embed a profile inside sRGB and save it under a new name. If this isn't the case, report and someone should be able to help.

  HAL

• How to restore the user profile and the content that I deleted.

  Help!

  I deleted a user profile and need to know how to restore.

  All emails and documents were stored under this profile.

  I thought that information was stored on computer for all to access.

  Yikes!

  I did a little research on Google and found this: http://forums.getdata.com/computer-data-recovery/978-how-recover-deleted-xp-home-user-profile.html which has a link for it: http://www.recovermyfiles.com/

  The person who used it happily replied that it worked very well. It seems that you would need to purchase the software to perform the restore. Note: I have not used it myself and can not say anything good or bad to this topic

  Other things I've read, it seems to do a restore of the system to a previous point is a bad idea and makes recovery more difficult.

• Corrupted profile and the profile "User" generated by Windows

  The profile that I use "Shortie" is corrupted and the 'User' profile was generated somehow.

  This has happened after running a registry cleaner on the computer. The same registry cleaner has been run on this computer without problem.

  I have run the restore of the system twice and both times it came back with an error.

  In Control Panel, the user that Shortie is listed under user accounts, but it is not under c:\Users[user-name]\Music\iTunes\iTunes

  I also ran Scannow without showing error.

  I created another account and copied files, but I need to get the recovered e-mail.

  Could someone help to regenerate the account "Alexandra" and let me know about the account "user"?

  Can I rename 'User' for 'Shortie', or it is time to take back the HP computer again?

  Thank you.

  Very well! I get it... registry cleaners are _ but don't you think I knew that on my own?

  The question on this post was about the corruption of the profiles.

  I went to another Committee and got the management that I needed.

  No further assistance is necessary.

  Thank you once again t-4-2

• Metadata profile and the lens do not match

  Hello

  I have a Fuji X - e1 and the last update from 4.4 LR running on 10.6.8 16 GB of RAM, all operating system up-to-date software.

  The problem is that my RAW of Fuji files do not show the correct lens profile in the develop module. The only choice available to choose is for Fuji X 100 (which I have ever owned or shot). The metadata in the library module are correct for the lens and the camera and also shows correctly in Bridge.

  However, with the same software on Macbook Pro a friend - also 10.6.8 LR 4.4, etc - the lens correctly profile to research the goal of the X - e1 self-correction and 18 mm.

  I uninstalled LR on the desktop using an uninstall program called Zap, downloaded 4.4, reinstalled and still the same "error".

  Any ideas on why 1) error and 2) how to correct?

  Thank you!

  There are a lot of profiles for Raw images but much less for JPG images.

  LR will only show profiles of lenses that apply to the file in question format. So when you have a JPG image file profiles for the first images will be not displayed in Lr and vice versa.

  If you do not correct lens profile in your list, you will need to download it.

  For this you need the Adobe Lens profile Downloader.

  And for this program, you need Adobe Air.

  Download two programs from Adobe website - they're free.

  Then, install Adobe Air first and when it is installed, install the Lens profile Downloader.

  After installation just to open, it is explicit and display all available lenses profiles once you have selected your camera and lens makes.

• The BDV-E580 Netflix app will be always updated to include support for the profile and the new interface of Netflix?

  I had my BDV-E580 for about I would say 2 years now, I don't plan on obtaining a new player Blu - Ray any time soon, because the surround speakers work fine with it, but I'm a little sad that I didn't get the support profile or the most recent software updates with Netflix interface , I recently noticed the icon has changed to the new red on white logo of Netflix, but it would be great if you (Sony) could support at least update the Netflix app for my and other devices.

  You can share your application at the 'join the Inspiration"community of Sony. Comments or suggestions that you would like to post there would be much appreciated.

• Camera profiles and the Canon software

  Hello

  Why the photo in Lightroom camera profiles are different than the same style of name chosen in Digital Photo Professional photo? They must produce the same EXACT of the RAW file version. I say that they ARE, because otherwise that's true - who had the true colors (e.g. faithful style is supposed to represent colors exactly if shot at 5200K, yet loyal DPP differs from faithful LR?)

  Also, is there a way to convert other image styles we created in profiles in Lightroom perhaps through some use of DNG Profile Editor?

  Thank you

  Juan

  They must produce the same EXACT of the RAW file version.

  The profiles are intended to give approximately the same rendering on the tone and color. You may not return exactly the same thing that Canon uses proprietary algorithms that cannot use Lightroom. Profiles approximately just those who use RAW of Lightroom conversion engine. Also, they come only close if you use the default settings of your camera, so not a priority to highlight, no saturation added, etc. If you want exactly the same thing, shoot jpeg or convert the raw for tiff in DPP. That said, my experience is that the corresponding profiles of the camera very close to off-camera as long as you do not change styles.

  I say that they ARE, because otherwise that's true - who had the true colors (e.g. faithful style is supposed to represent colors exactly if shot at 5200K, yet loyal DPP differs from faithful LR?)

  None of the styles of Canon gives accurate. This is not what they are supposed to do. They are supposed to be visually appealing, which differs very precise. Faithful is not really correct color target scene. See for some measures than on one of the more specific cameras, the Canon 5 D mk II, here. How to get the correct color, if that's what you are interested, is to shoot a colorchecker chart and use free Adobe's DNG profile editor to generate a profile calibrated for your camera.

  Also, is there a way to convert other image styles we created in profiles in Lightroom perhaps through some use of DNG Profile Editor?

  Lol would be nice, but is not currently possible without a lot of manual work. You can shoot a colorchecker and comparing the rendering in the DNG profile editor to the DPP in visually and using the tools of patch, you might be able to get there, but this will be very tedious. I think if we could give DNG Profile Editor, a different target that made perfect of the colorchecker, because at the present time, the only way to do it is Visual.

• User profiles and the update database

  Two questions:
  
  1. How can I do so that when you click on a user's profile, it shows the information of that person? The user Server Side Includes? Variables?
  
  2. How can I do so that when a user clicks on a link, the data base is updated?
  Ex: There is a certain numerical value in the database, and clicking on a link, it will go up by 3, something like that.
  
  I searched devnet and the help files, forums and google searched for 3 days but no not always further.
  
  Seriously , any help would be appreciated.

  Ah, I had the user profile that you want to work with a little assistance from MX Kollection :D

• Performance profile and the memory of a simple program

  I'm trying to find the program execution time using the tools-> profile-> performance and memeory to the simple add function.

  in my case, no matter how many times the loop runs (1 or 10,000), the given time is 15625. Is there a reason for this particular number?

  Thank you.

  Hi Julie,.

  15.625ms is the usual resolution when measuring time on Windows before WinVista (XP and above). Maybe that's what you see?

• Profiles and the responsibility MY

  Hello

  I need to know what profile I have to save up for a new responsibility MY.

  When I created the new responsibility according to already existing (pure copy with a different name) and then on the start page that I have pre-filled organization and I can not change. The responsibility of old works fine so the problem is not in my user or person.

  I was looking for what attributes to default and I did it for all the profiles of MO: %.

  Please provide me with necessary measures that must be carried out when a new role is created.

  eBS: 12.1.3

  Thank you

  The root of the problem is in the organization access settings.

  Our Organization has used this and every new role should be included in the parameters of this.

• Not appearing ICC profiles do not

  Hello!   Totally frustrated here...   I'm doing my first event in LR 6 but it does not find the printer icc profile.  I did that the printer driver is installed, and my printer is working, so I have to assume that it is installed.

  I have a HP Photosmart 7525.

  I'm not really intending to print on this printer, but I am experimenting with using the icc profile in event before as I have called my photo lab I have a small idea of what I do when I talk with them.

  My books of LR, I should have an option to specify the two printer icc profiles and the paper icc profiles. But there is no option for me specify the paper anywhere.

  I've been both HP.com and InternationalPaper.com and don't have neither icc profiles available for download.  Grrr.

  Not much hair left on my head.

  Thanks for your help!

  Anne

  Good to see the useful messages in this thread of trshaner and TheDigitalDog (Digital Dog: hand )

• Question about ICC profiles

  I try to use some new Canson paper.  I downloaded and installed the ICC profile, and the next step says to go to 'File' then 'export', 'GIF', 'Print plug-in.  However the "PII" option does not appear.  Any ideas?

  Profile are to be installed in your operating system.  I search the Web for your plugin gif.   It turns out that sound of Cannon for Photoshop.  It's a third party plugin you need to install the plug-in in the version of Photoshop help. If you want to use in Photoshop. If you have not installed it in Photoshop it will not appear in the file menu > export > iPF printer...

  I don't know if you can use it to print on your printer... You may be able to print using the print in Photoshop dialog box.  The plug-in should have come with you, printer and would need to be installed by you in Photoshop.  As several tutorials on using Photoshop on YouTube for example.

  Canon iPF printers - print cross test plugin for Photoshop - YouTube

• Tecra A4: I need the LCD display ICC profile color

  Hello

  I have a Tecra A4-SP619 and I need the color of ICC profile for the LCD.

  Please, could you help get it?

  Thanks in advance.
  Sergio

  Hello

  I put t know why you need this profile, but to my knowledge you n t need this option to use the laptop properly.
  The Windows operating system and the graphics driver choose the right color management. You n t need to install anything.
  But still, in my opinion this information you will find in the manual of the user of this laptop.